ST RELAYS TERMINAL SOCKETS ACCESSORIES SPECIFICATIONS Item Specifications Between contact and coil: 4,000 Vrms for 1 min. (Detection current: 10 mA) Between contact and terminal: 2,000 Vrms for 1 min. Min. 1,000 M between terminals (500V DC) 150C 302F for 1 hr 10 A 15 times Breakdown voltage (Initial) Insulation resistance (Initial) Heat resistance Max. continuous current Relay insertion life Terminal socket for PC board Terminal socket for soldering DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ Terminal socket for PC board RoHS compliant Terminal socket for soldering CAD Data CAD Data TYPES 4 .158 Product name Terminal socket for PC board Terminal socket for soldering 4 .158 16.4 .646 Part No. ST-PS ST-SS FEATURES 7.62 .300 1. Possible to fit or remove the chassis with one touch (t = 0.6 mm to 2.2 mm .024 inch to .087 inch) 2. Easy design of PC board pattern (2.54 mm x 4 pitch DIL terminal array) 3. High breakdown voltage. 10.16 .400 31.6 1.244 1.05 .041 0.3 .012 4.3 .169 0.27 .011 7.62 .300 10.16 .400 14.6 .575 16.4 .646 0.3 .012 5.3 .209 5.5 .217 7.62 .300 35.4 1.394 8 7 6 5 10.16 .400 31.6 1.244 35.4 1.394 2.3 .090 0.27 .011 2 3 5.5 .217 14.6 .575 7.62 .300 8 7 6 5 1 2 3 4 16.6 .654 1 10.16 .400 16.6 .654 4 PRECAUTIONS FOR USE (SOCKET) Contact terminal interval Coil terminal interval 8 7 6 5 1 2 3 4 8-1.5 dia. 8-.060 dia. 3. Relay mounting and removal (1) Align the directions of the relay and socket. Relay 2. Chassis cutout Chassis cutting dimensions 1. PC board mounting method PC board pattern 15.00.2 .591.008 32.50.1 1.280.004 2.54 .100 Press 2.54 .100 The terminal configuration is symmetrical on the left and right, so an arrow mark is stamped on the socket to prevent misinsertion. We recommend printing the same arrow mark on the component mounting side (side opposite from pattern) of the PC board. In this case, the terminal configuration becomes the terminal nos. noted near the drilling holes. Claw for chassis fastening A side (2) Insert the relay all the way in, so it is securely in place. Chassis t = 0.6 to 2.2 .024 to .087 If the chassis hole is punched with a press, set so the release R on the front side (A side). The range for chassis thickness is 0.6 to 2.2 mm .024 to .087 inch. Hinge mechanism (3) Press the part indicated by A in the B direction, and fasten by placing the hook on the relay. Relay case cross-section B (Before fastening) A (Fastening complete) (4) When removing the relay, completely release the hooks on both sides and pull the relay out. -1- ASCTB211E 201701-T