107-68358 Packaging Specification 04May09 Rev M 2.5MM PITCH BATTERY CONN 1. PURPOSE Define the packaging specifiction and packaging method of 2.5MM PITCH BATTERY CONN. 2.5MM PITCH BATTERY CONN 2. APPLICABLE PRODUCT Tyco P/N. 1939246-1 1717478-1/2 Description 2.5MM PITCH BATTERY REC. DIP, V, PACKING SMD ASSY FOR QD CONNECTION SYSTEM 1674231-1 REC ASSY 2.5MM PITCH BATTERY CONN 1-1674231-1 REC ASSY 2.5MM PITCH BATTERY CONN 1565860-1 RECEPTACLE ASSEMBLY FOR 2.5mm PITCH BATTERY CONNECTOR 1473776-7 RECEPTACLE ASSY FOR 2.5MM PITCH BATTERY CONN 1-1473776-7 RECEPTACLE ASSY FOR 2.5MM PITCH BATTERY CONN 1674430-1 REC ASSY REVERSE TYPE 2.5MM PITCH BATTERY CONNECTOR 1717620-1 REC ASSY 8POS.R/A DIP TYPE 2.5mm PITCH BATTERY CONNECTOR 1746798-1 REC ASSY 8POS,R/A DIP REVERSE TYPE 2.5MM PITCH BATTERY CONNECTOR 3. PACKAGING MATERIAL Package Part No. INNER 1-912023-5 PS TRAY 8-912068-9 INNER BOX TYPE-6 1-623124-0 DESICCANT MIDDLE Size(LxWxH) Usage 335X230X23.8 7/600 340X240X84 1/600 25g 2/600 995265-2 PE BAG 508x381 1/600 623853-1 PE film 25w 6.5 MR/600 315X200X7 2/600 3-912074-2 OUTER Description URETHANE CUSHION 623865-4 INNER LABEL 95X76 1/600 4-912011-6 CARTON C-32 490X350X172 1/2400 912065-2 AIR CAP 1100X390X4 1/2400 623865-1 OUTER LABEL 102X102 1/2400 DR CHK APVD Sam Wu Ocean Tang Ansin Yang Tyco Electronics AMP Guangdong Ltd. East Rongqi Road, Ronggui Town, Shunde, Foshan, Guangdong, P.R. China QR-ME-030B * Trademark | Indicates change 1 of 3 LOC FR 107-68358 3. PACKAGING MATERIAL Inner Middle Outer LABEL - 623865-4 623865-1 SEALING Tape Tape Tape 4.PACKAGING QUANTITY QTY Inner Middle Outer 100 pcs/tray 600 pcs/inner box 600X4=2400 pcs/carton 5. PACKING METHOD 5.1. Load connectors qty as 4 all oriented same way into tray. 4TRAY 1 1717478-1 5.2. Place another tray onto previous tray with products.and ensure the two trays are justification completely. TRAYTRAY 5.3. Stack 6 trays with contacts one by one, then put an empty tray. 6 TRAY TRAY 5.4. Wrap 7 stacked with tape. TRAY :2 2 Rev M QR-ME-030B 2 of 3 107-68358 5. PACKING METHOD 5.5.Place one stack with 7 trays into the polybag and place two bags of desiccant(1-623124-0) on top of tray & heat-seal it. TRAY(7tray)TRAY(1-623124-0) 5.6. Set up an inner box. 5.7. Place a foam to bottom of inner box, and ensure under edge of tray don't pin cushion. TRAY 5.8. Place one bag of trays with full of connectors into the inner box & place 1 cushion on top of tray. TRAYTRAY1 5.9. Close cover of the inner box, place tape on the middle of three sides. () 5.10. Place an inner label to the middle of cover of inner box. 5.11. Set up a carton and secure bottom flaps with tape. 5.12. Spread one piece of air cap and put into the carton, air cap facing outside. 5.13. Put 4 inner boxes full of products into the carton and muffle 4 inner boxes with air cap. 4 5.14. Seal the box with tape. And place product identification label in "product id" marked on box. "PRODUCT ID" Rev M QR-ME-030B 3 of 3