HMC310MS8G / 310MS8GE v03.0607 Typical Applications Features Transmit & Receive Switch for 2.4 GHz Applications: Tx Gain: 15 dB, Rx Gain: 13 dB * Bluetooth Rx Noise Figure: 3 dB @ 2.4 GHz * HomeRF Single Positive Supply: +3V * WLAN Radios No External Matching Required Functional Diagram General Description TE Tx 1 dB Compression Point: 5 dBm LE The HMC310MS8G & HMC310MS8GE are multifunction RFICs that incorporates a power amplifier (PA) and low noise amplifier (LNA) with a transmit/ receive switch. These RFICs offer 15 dB gain and +5 dBm P1dB in the transmit mode and 13 dB of gain with an overall noise figure of 3 dB when in receive mode. Transmit and receive performance levels have been selected to meet the BLUETOOTH Class 2 & 3 requirements when used in conjunction with 2.4 GHz ASICs such as National Semiconductor's LMX3162. This low current and low cost transceiver requires no external circuitry to operate the amplifier power down features, and is available in the industry standard MSOP8G package, which is 0.118" x 0.190" (3.0mm x 4.9mm). B SO LOW NOISE AMPLIFIERS - SMT 8 BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER O Electrical Specifi cations, TA = +25 C, Vdd = +3V Receive Mode Transmit Mode Parameter Units Min. Max. Min. 13 15 12 Gain Variation over Temperature 0.03 0.04 Noise Figure 3.0 4.0 Frequency Range Gain Input Return Loss 2.4 - 2.5 8 Tx Typ. Max. 2.4 - 2.5 GHz 15 17 dB 0.03 0.04 dB/C dB 4 6 4 7 Output Return Loss 9 12 10 13 dB Output Power for 1 dB Compression (P1dB) -7 -4 1 5 dBm Saturated Output Power (Psat) -5 0 3 7 dBm Output Third Order Intercept (IP3) 3 6 3 10 dBm 24 mA Supply Current (Idd) 8-8 Rx Typ. 12 dB For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC310MS8G / 310MS8GE v03.0607 BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER 4 12 2 TE 8 3 +25C +85C -40C +25 C +85 C -40 C 1 0 0 2 2.2 2.4 2.6 2.8 3 2 FREQUENCY (GHz) 2.2 2.4 2.6 2.8 3 2.8 3 LE FREQUENCY (GHz) Rx Return Loss Rx 1dB Compression Point 0 0 -2 -10 -15 B SO -5 -4 -6 +25 C +85 C -40 C -8 Input Return Loss Output Return Loss -20 2 2.2 2.4 2.6 2.8 LOW NOISE AMPLIFIERS - SMT 16 NOISE FIGURE (dB) 5 P1dB (dBm) GAIN (dB) 20 4 RETURN LOSS (dB) 8 Rx Noise Figure Rx Gain -10 3 2 2.2 2.4 2.6 FREQUENCY (GHz) FREQUENCY (GHz) O Rx Output Third Order Intercept Point 10 IP3 (dBm) 8 6 4 2 0 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz) For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 8-9 HMC310MS8G / 310MS8GE v03.0607 8 BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER Tx Gain Tx Return Loss 0 RETURN LOSS (dB) 12 +25 C +85 C -40 C 8 -5 -10 TE GAIN (dB) 16 4 -15 Input Return Loss Output Return Loss 0 -20 2 2.2 2.4 2.6 2.8 3 2 FREQUENCY (GHz) 2.2 2.4 2.6 2.8 3 LE FREQUENCY (GHz) Tx 1dB Compression Point Tx Output Third Order Intercept Point 10 15 6 4 +25 C +85 C -40 C 2 0 2 2.2 2.4 2.6 2.8 3 11 9 7 5 2 2.2 2.4 2.6 2.8 3 FREQUENCY (GHz) O FREQUENCY (GHz) IP3 (dBm) 13 B SO 8 P1dB (dBm) LOW NOISE AMPLIFIERS - SMT 20 8 - 10 For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC310MS8G / 310MS8GE v03.0607 BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER 8 Truth Table +7.0 Vdc Tx Section Active VCTL = Vdd Control Voltage Range (Vctl) -0.2 to Vdd Rx Section Active VCTL = 0V RF Input Power (Vdd = +3.0 Vdc) 0 dBm Channel Temperature 150 C Continuous Pdiss (T = 85 C) (derate 5 mW/C above 85 C) 0.325 W Thermal Resistance (channel to ground paddle) 200 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS O B SO LE Outline Drawing TE Drain Bias Voltage (Vdd) LOW NOISE AMPLIFIERS - SMT Absolute Maximum Ratings NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC310MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC310MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H310 XXXX [2] H310 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 8 - 11 HMC310MS8G / 310MS8GE v03.0607 BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER Evaluation PCB B SO LE TE LOW NOISE AMPLIFIERS - SMT 8 Note: DC blocking capacitors on the Tx and ANT ports are required to evaluate this part. These capacitors may not be required in the final circuit design if interfacing components are DC blocked. O List of Materials for Evaluation PCB 103339 [1] Item Description J1, J2, J3 PCB Mount SMA Connector J4, J5 DC Pins C1 .01 F Capacitor, 0603 Pkg. C2, C3 100 pF Capacitor, 0603 Pkg. U1 HMC310MS8G / HMC310MS8GE Transceiver PCB [2] Evaluation Board 1.5" x 1.55" [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 8 - 12 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. HMC310MS8G / 310MS8GE v03.0607 BLUETOOTH & 2.4 GHz WLAN GaAs MMIC TRANSCEIVER TE LE B SO O LOW NOISE AMPLIFIERS - SMT 8 Notes: For price, delivery, and to placeCorporation: orders: Analog Devices, Inc., For price, delivery, and to place orders, please contact Hittite Microwave One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 20 Alpha Road, Chelmsford, MA 01824 Phone: Phone: 978-250-3343 978-250-3373 781-329-4700Fax: * Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D Order On-line at www.hittite.com Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. 8 - 13