STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 N-channel 100 V, 0.0068 typ., 80 A, STripFETTM VII DeepGATETM Power MOSFET in D2PAK, DPAK, TO-220FP and TO-220 Datasheet - production data Features TAB TAB 3 Order codes 1 3 VDS RDS(on) max ID PTOT 80 A 120 W 80 A 120W STF100N10F7 45 A 30 W STP100N10F7 80A 150 W DPAK 1 D2PAK STB100N10F7 STD100N10F7 TAB 100 V 3 3 2 1 1 2 TO-220 TO-220FP Figure 1. Internal schematic diagram 0.008 * Ultra low on-resistance * 100% avalanche tested Applications * Switching applications ' 7$% Description These devices utilize the 7th generation of design rules of ST's proprietary STripFETTM technology, with a new gate structure. The resulting Power MOSFET exhibits the lowest RDS(on) in all packages. * 6 $0Y Table 1. Device summary Order codes Marking Packages Packaging D2PAK Tape and reel DPAK Tape and reel STF100N10F7 TO-220FP Tube STP100N10F7 TO-220 Tube STB100N10F7 STD100N10F7 100N10F7 November 2013 This is information on a product in full production. DocID023737 Rev 4 1/23 www.st.com 23 Contents STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 2/23 .............................................. 9 DocID023737 Rev 4 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter DPAK TO-220FP TO-220 Unit D2PAK VDS Drain-source voltage 100 V VGS Gate-source voltage 20 V ID 45 80 A Drain current (continuous) at TC = 100 C 62 32(1) 70 A Drain current (pulsed) 320 180 320 A Total dissipation at TC = 25 C 120 30 150 W Drain current (continuous) at TC = 25 C ID IDM(2) PTOT 80 (1) (1) TJ Operating junction temperature C -55 to 175 Tstg Storage temperature C 1. This value is limited by package.. 2. Pulse width limited by safe operating area. Table 3. Thermal resistance Value Symbol Parameter Rthj-case Thermal resistance junction-case Rthj-amb Thermal resistance junctionambient Rthj-pcb (1) Unit D2PAK DPAK TO-220FP TO-220 1 1.25 5 1 Thermal resistance junction-pcb 62.50 30 50 C/W C/W C/W 1. When mounted on FR-4 board of 1inch, 2oz Cu, t < 10 sec Table 4. Avalanche characteristics Symbol EAS Parameter Single pulse avalanche energy (TJ = 25 C, L = 3.5 mH, IAS = 15 A, VDD = 50 V, VGS = 10 V) DocID023737 Rev 4 Value Unit 400 mJ 3/23 Electrical characteristics 2 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Electrical characteristics (TCASE=25 C unless otherwise specified) Table 5. On/off states Symbol Parameter Test conditions Min. Typ. Max. Unit - V Drain-source breakdown voltage (VGS= 0) ID = 250 A IDSS Zero gate voltage drain current (VGS = 0) VDS = 100 V VDS = 100 V; TC=125 C 1 100 A A IGSS Gate body leakage current (VDS = 0) VGS = 20 V 100 nA Gate threshold voltage VDS= VGS, ID = 250 A 4.5 V Static drain-source onresistance For D2PAK, DPAK and TO-220 VGS= 10 V, ID= 40 A For TO-220-FP VGS= 10 V, ID= 22.5 A 0.0068 0.008 Min. Typ. Max. Unit - 4369 - pF - 823 - pF - 36 - pF - 61 - nC - 26 - nC - 13 - nC Min. Typ. Max. Unit - 27 - ns - 40 - ns - 46 - ns - 15 - ns V(BR)DSS VGS(th) RDS(on) 100 2.5 Table 6. Dynamic Symbol Parameter Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Qg Total gate charge Qgs Gate-source charge Qgd Gate-drain charge Test conditions VDS =50 V, f=1 MHz, VGS=0 VDD=50 V, ID = 80 A VGS =10 V Figure 18 Table 7. Switching times Symbol td(on) tr td(off) tf 4/23 Parameter Test conditions Turn-on delay time Rise time Turn-off delay time VDD=50 V, ID= 40 A, RG=4.7 , VGS= 10 V Figure 17 Fall time DocID023737 Rev 4 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Electrical characteristics Table 8. Source drain diode Symbol Parameter Test conditions Min Typ. Max Unit Source-drain current - 80 A (1) Source-drain current (pulsed) - 320 A (2) Forward on voltage ISD = 80 A, VGS=0 - 1.2 V trr Reverse recovery time - 77 ns Qrr Reverse recovery charge - 146 nC IRRM Reverse recovery current ISD = 80 A, di/dt = 100 A/s, VDD=80 V, Tj=150 C - 4 A ISD ISDM VSD 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300 s, duty cycle 1.5% DocID023737 Rev 4 5/23 Electrical characteristics 2.1 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Electrical characteristics (curves) Figure 2. Safe operating area for DPAK Figure 3. Thermal impedance for DPAK AM15754v1 ) on D S( O Li per m at ite i o d ni by n m this ax a R rea is ID (A) 100 100s 10 1ms 1 Tj=175C Tc=25C Single pulse 0.1 0.1 10 1 10ms 100 VDS(V) Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP AM15755v1 ) on D S( O Li per m at ite io d ni by n m this ax a R rea is ID (A) 100 10 100s 1ms 1 Tj=175C Tc=25C Single pulse 0.1 0.1 10 1 10ms 100 VDS(V) Figure 6. Safe operating area for D2PAK and TO-220 AM15756v1 K AM15761v1 =0.5 ) on D S( O Li per m at ite io d ni by n m this ax a R rea is ID (A) Figure 7. Thermal impedance for D2PAK and TO-220 100 0.2 0.05 0.02 0.01 0.1 10 100s 10 -1 1ms Single pulse 1 Tj=175C Tc=25C Single pulse 0.1 0.1 6/23 1 10 10ms 100 VDS(V) 10 -2 10 -5 DocID023737 Rev 4 10 -4 10 -3 10 -2 10 -1 tp(s) STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Figure 8. Output characteristics Figure 9. Transfer characteristics AM15757v1 ID (A) VGS=10V 300 AM15745v1 ID (A) VDS=5V 300 9V 250 Electrical characteristics 250 8V 200 200 7V 150 150 100 100 6V 50 50 5V 0 0 0 2 1 3 4 VDS(V) Figure 10. Normalized V(BR)DSS vs temperature AM15747v1 V(BR)DSS (norm) ID=1mA 1.04 2 3 4 5 6 7 8 9 10 VGS(V) Figure 11. Static drain-source on-resistance AM15748v1 RDS(on) (m) 14.0 VGS=10V 12.0 1.02 10.0 8.0 1 6.0 0.98 4.0 0.96 2.0 0.94 -55 -30 -5 0.0 20 45 70 95 120 TJ(C) Figure 12. Gate charge vs gate-source voltage AM15758v1 VGS (V) VDD=50V 12 0 20 40 60 80 100 ID(A) Figure 13. Capacitance variations AM15759v1 C (pF) 5000 ID=80A Ciss 10 4000 8 3000 6 2000 4 1000 2 0 0 20 40 60 Qg(nC) DocID023737 Rev 4 0 0 10 20 30 40 50 60 70 80 Coss Crss VDS(V) 7/23 Electrical characteristics STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Figure 14. Normalized gate threshold voltage vs temperature AM15746v1 VGS(th) Figure 15. Normalized on-resistance vs temperature AM15760v1 RDS(on) (norm) (norm) ID=40A 2 1.04 ID= 250 A 1.8 1.02 1.6 1 1.4 0.98 1.2 1 0.96 0.8 0.94 0.6 0.92 -55 -30 -5 0.4 -55 -30 -5 20 45 70 95 120 TJ(C) Figure 16. Source-drain diode forward characteristics AM15749v1 VSD (V) TJ=-55C 1.1 1 0.9 TJ=25C 0.8 0.7 TJ=150C 0.6 0.5 0 8/23 20 40 60 80 100 ISD(A) DocID023737 Rev 4 20 45 70 95 120 TJ(C) STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 3 Test circuits Test circuits Figure 17. Switching times test circuit for resistive load Figure 18. Gate charge test circuit VDD 12V 47k 1k 100nF 3.3 F 2200 RL F VGS IG=CONST VDD 100 Vi=20V=VGMAX VD RG 2200 F D.U.T. D.U.T. VG 2.7k PW 47k 1k PW AM01468v1 Figure 19. Test circuit for inductive load switching and diode recovery times A A D.U.T. FAST DIODE B B AM01469v1 Figure 20. Unclamped inductive load test circuit L A D G VD L=100H S 3.3 F B 25 1000 F D VDD 2200 F 3.3 F VDD ID G RG S Vi D.U.T. Pw AM01470v1 AM01471v1 Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 0 DocID023737 Rev 4 10% AM01473v1 9/23 Package mechanical data 4 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Figure 23. DPAK (TO-263) drawing 0079457_T 10/23 DocID023737 Rev 4 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Package mechanical data Figure 24. DPAK footprint(a) 16.90 12.20 5.08 1.60 3.50 9.75 Footprint a. All dimension are in millimeters DocID023737 Rev 4 11/23 Package mechanical data STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Table 9. DPAK (TO-252) mechanical data mm Dim. Min. Typ. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1.00 1.50 (L1) 2.80 L2 0.80 L4 0.60 1.00 R V2 12/23 Max. 0.20 0 8 DocID023737 Rev 4 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Package mechanical data Figure 25. DPAK (TO-252) drawing 0068772_K DocID023737 Rev 4 13/23 Package mechanical data STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Figure 26. DPAK footprint (b) Footprint_REV_K b. All dimensions are in millimeters 14/23 DocID023737 Rev 4 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Package mechanical data Table 10. TO-220FP mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 DocID023737 Rev 4 15/23 Package mechanical data STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Figure 27. TO-220FP drawing 7012510_Rev_K_B 16/23 DocID023737 Rev 4 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Package mechanical data Table 11. TO-220 type A mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 P 3.75 3.85 Q 2.65 2.95 DocID023737 Rev 4 17/23 Package mechanical data STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Figure 28. TO-220 type A drawing 0015988_typeA_Rev_S 18/23 DocID023737 Rev 4 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 5 Packaging mechanical data Packaging mechanical data Table 12. DPAK (TO-263) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base qty 1000 P2 1.9 2.1 Bulk qty 1000 R 50 T 0.25 0.35 W 23.7 24.3 330 13.2 26.4 30.4 Table 13. DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 DocID023737 Rev 4 18.4 22.4 19/23 Packaging mechanical data STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Table 13. DPAK (TO-252) tape and reel mechanical data (continued) Tape Reel mm mm Dim. Dim. Min. Max. P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 Min. Max. Figure 29. Tape 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 K0 For machine ref. only including draft and radii concentric around B0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 20/23 DocID023737 Rev 4 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Packaging mechanical data Figure 30. Reel T REEL DIMENSIONS 40mm min. Access hole At slot location B D C N A Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 DocID023737 Rev 4 21/23 Revision history 6 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Revision history Table 14. Document revision history Date Revision 05-Oct-2012 1 First release. 2 - Inserted device in TO-220FP. - Updated title and features on the cover page, Table 1: Device summary, Table 2: Absolute maximum ratings, Table 3: Thermal resistance and Table 5: On/off states accordingly. - Updated Table 6: Dynamic, Table 7: Switching times, Table 8: Source drain diode and Section 4: Package mechanical data. - Added Section 5: Packaging mechanical data. 3 - Modified: the entire typical values in Table 6, tf typical value inTable 7, VSD and typical values for trr, qrr, IRRM - Inserted:Table 4: Avalanche characteristics and Section 2.1: Electrical characteristics (curves) - Minor text changes 4 - Inserted device in D2PAK. - Updated title and features on the cover page, Table 1: Device summary, Table 2: Absolute maximum ratings, Table 3: Thermal resistance and Table 5: On/off states accordingly. - Updated Table 6: Dynamic, Section 4: Package mechanical data and Section 5: Packaging mechanical data. 07-Feb-2013 29-Apr-2013 25-Nov-2013 22/23 Changes DocID023737 Rev 4 STB100N10F7, STD100N10F7, STF100N10F7, STP100N10F7 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER'S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR "AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL" INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2013 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com C C C G DocID023737 Rev 4 23/23 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: STP100N10F7 STD100N10F7 STF100N10F7 STB100N10F7