NF2W757GTR-V1 - Nichia Corporation

NICHIA STS-DA1-4391C <Cat.No.170331>

NICHIA CORPORATION

SPECIFICATIONS FOR WHITE LED

NF2W757GRT-V1

● Pb-free Reflow Soldering Application

● Built-in ESD Protection Device

● RoHS Compliant

NICHIA STS-DA1-4391C <Cat.No.170331>

SPECIFICATIONS

(1) Absolute Maximum Ratings

Item

Symbol

Absolute Maximum Rating

Unit

Forward Current

200

Pulse Forward Current

IFP

400

Allowable Reverse Current

Power Dissipation

1.32

Operating Temperature

Topr

-40~100

°C

Storage Temperature

Tstg

-40~100

°C

Junction Temperature

120

°C

* Absolute Maximum Ratings at TJ=25°C.

* IFP conditions with pulse width ≤10ms and duty cycle ≤10%.

* For IF and IFP, see the "DERATING CHARACTERISTICS" of this specification.

(2) Initial Electrical/Optical Characteristics

Item

Symbol

Condition

Typ

Max

Unit

Forward Voltage

IF=150mA

6.3

R70

Luminous Flux

Φv

IF=150mA

147

R8000

IF=150mA

144

R9050

IF=150mA

123

Chromaticity Coordinate

IF=150mA

0.3447

IF=150mA

0.3553

Thermal Resistance

RθJS

°C/W

* Characteristics at TJ=25°C and measured in pulse mode.

* Optical Characteristics as per CIE 127:2007 standard.

* Chromaticity Coordinates as per CIE 1931 Chromaticity Chart.

* RθJS is measured using the Dynamic Mode detailed in JESD51-1.

* RθJS is the thermal resistance from the junction to the TS measurement point.

（Test board: FR4 board thickness=1.6mm, copper layer thickness=0.07mm）

NICHIA STS-DA1-4391C <Cat.No.170331>

RANKS

Item

Rank

Condition

Min

Max

Unit

Forward Voltage

IF=150mA

5.8

6.6

Luminous Flux

P20

IF=150mA

144.0

171.2

P19

121.1

144.0

P18

101.8

121.1

P17

85.6

101.8

Color Rendering Index

R70

IF=150mA

R8000

R9050

Color Ranks(IF=150mA)

The color rank has a chromaticity range within a 3-step MacAdam ellipse.

Rank

sm503

Rank

sm573

Rank

sm653

Color Temperature

(Unit: K)

TCP

5000

5700

6500

Center Point

0.3447

0.3287

0.3123

0.3553

0.3417

0.3282

Minor Axis

0.003555

0.003087

0.002709

Major Axis

0.008418

0.007809

0.006561

Ellipse Rotation Angle

-31.78

-31.56

-32.35

The color rank has a chromaticity range within a 5-step MacAdam ellipse.

Rank

sm5050a

Rank

sm5050b

Rank

sm5050c

Rank

sm5050d

Rank

sm5050e

Rank

sm5050f

Color Temperature

(Unit: K)

TCP

5000

Center Point

0.3447

0.3553

Minor Axis

0.005925

Major Axis

0.014030

Ellipse Rotation Angle

-31.78

Rank

sm5750a

Rank

sm5750b

Rank

sm5750c

Rank

sm5750d

Rank

sm5750e

Rank

sm5750f

Color Temperature

(Unit: K)

TCP

5700

Center Point

0.3287

0.3417

Minor Axis

0.005145

Major Axis

0.013015

Ellipse Rotation Angle

-31.56

NICHIA STS-DA1-4391C <Cat.No.170331>

Rank

sm6550a

Rank

sm6550b

Rank

sm6550c

Rank

sm6550d

Rank

sm6550e

Rank

sm6550f

Color Temperature

(Unit: K)

TCP

6500

Center Point

0.3123

0.3282

Minor Axis

0.004515

Major Axis

0.010935

Ellipse Rotation Angle

-32.35

* Ranking at TJ=25°C and measured in pulse mode.

* Forward Voltage Tolerance: ±0.07V

* Luminous Flux Tolerance: ±5%

* Color Rendering Index Ra Tolerance: ±1.5

* Color Rendering Index R9 Tolerance: ±3

* The R9 value for the above rank shall be greater than 0.

* Chromaticity Coordinate Tolerance: ±0.003

* LEDs from the above ranks will be shipped.

The rank combination ratio per shipment will be decided by Nichia.

Definition of the MacAdam ellipse ranks:

60°

A perfect circle is divided

into 60 degree-sections

and then transformed

into the MacAdam ellipse

that is presented

on the chromaticity diagram

in this document.

Luminous Flux Ranks by Color Rank, Color Rendering Index Rank

Ranking by

Luminous Flux

Ranking by

Color Coordinates,

Color Rendering Index

P17

P18

P19

P20

sm503,sm5050a,sm5050b,sm5050c,sm5050d,sm5050e,sm5050f,

sm573,sm5750a,sm5750b,sm5750c,sm5750d,sm5750e,sm5750f,

sm653,sm6550a,sm6550b,sm6550c,sm6550d,sm6550e,sm6550f

R70,R8000

R9050

NICHIA STS-DA1-4391C <Cat.No.170331>

CHROMATICITY DIAGRAM

5000K

5700K

6500K

0.31

0.32

0.33

0.34

0.35

0.36

0.37

0.38

0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36

黒体放射軌跡

Blackbody Locus

sm5050c

sm5750a

sm6550c

sm6550f

sm6550e

sm5050f

sm5050a

sm503

sm5050e

sm5050d

sm5750f

sm5750e

sm5750d

sm573

sm6550b

sm6550a

sm6550d

sm653

sm5750b

sm5750c

sm5050b

NICHIA STS-DA1-4391C <Cat.No.170331>

OUTLINE DIMENSIONS

STS-DA7-9621B

Nx2x757GR-Vx

管理番号 No.

(単位 Unit: mm)

This product complies with RoHS Directive.

本製品はRoHS指令に適合しております。

(単位 Unit: mm, 公差 Tolerance: ±0.2)

The dimension(s) in parentheses are for reference purposes.

括弧で囲まれた寸法は参考値です。

Dimensions do not include mold flash.

バリは寸法に含まないものとします。

The side with the larger distance is the cathode.

Example: a>b, then a is the side that has the cathode.

a>bとなる場合、aがカソード側です。

0.65

1.42

2.27

Cathode Anode

0.48

2.6

(Cathode) b

(Anode)

K A

保護素子

Protection Device

項目 Item

パッケージ材質

Package Materials

封止樹脂材質

Encapsulating Resin

Materials

電極材質

Electrodes Materials

質量

Weight

内容 Description

耐熱性ポリマー

Heat-Resistant Polymer

シリコーン樹脂

（拡散剤+蛍光体入り）

Silicone Resin

(with diffuser and phosphor)

銅合金+銀メッキ

Ag-plated Copper Alloy

0.018g(TYP)

Cathode Mark

（2.6）

（2.6）光学的中心位置

Location of the optical center

NICHIA STS-DA1-4391C <Cat.No.170331>

SOLDERING

• Recommended Reflow Soldering Condition(Lead-free Solder)

120sec Max

Pre-heat

180 to 200°C

260°CMax

10sec Max

60sec Max

Above 220°C

1 to 5°C per sec

• Recommended Hand Soldering Condition

Temperature

350°C Max

Soldering Time

3sec Max

● Recommended Soldering Pad Pattern ● Recommended Metal Solder Stencil Aperture

(単位 Unit: mm)

0.6 1.45 0.95 0.6

0.85 2.3 0.85

0.4

2.3

3.15

0.6 1.53

0.69

0.6

0.58

2.3

3.15

* This LED is designed to be reflow soldered on to a PCB. If dip soldered, Nichia cannot guarantee its reliability.

* Reflow soldering must not be performed more than twice. Hand soldering must not be performed more than once.

* Avoid rapid cooling. Ramp down the temperature gradually from the peak temperature.

* Nitrogen reflow soldering is recommended. Air flow soldering conditions can cause optical degradation,

caused by heat and/or atmosphere.

* Since the silicone used in the encapsulating resin is soft, do not press on the encapsulant resin.

Pressure can cause nicks, chip-outs, encapsulant delamination and deformation, and wire breaks, decreasing reliability.

* Repairing should not be done after the LEDs have been soldered. When repairing is unavoidable,

a double-head soldering iron should be used.

It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

* When soldering, do not apply stress to the LED while the LED is hot.

* When using a pick and place machine, choose an appropriate nozzle for this product. Using a pick-and-place nozzle

with a smaller diameter than the size of the LED's emitting surface will cause damage to the emitting surface

and may also cause the LED not to illuminate.

NICHIA STS-DA1-4391C <Cat.No.170331>

* If the top cover tape is removed right next to where the nozzle picks up the LEDs, regardless of whether the LEDs have been baked

or not, it may cause the LED to be picked up incorrectly; it is recommended to remove the top cover tape further

from where the nozzle picks up the LEDs. Ensure that there are no issues with the conditions when the nozzle picks up the LEDs.

● Recommended Tape Removal Position(Removing the cover tape further from the pick-and-place nozzle)

吸着ノズル

Pick-and-place nozzle

キャリアテープ引き出し方向

Feed Direction of the Carrier Tape

テープ剥離位置

Tape Removal Position 製品テープ

Top Cover Tape

● Incorrect Tape Removal Position(Removing the cover tape right next to the pick-and-place nozzle)

製品テープ

Top Cover Tape

吸着ノズル

Pick-and-place nozzle

テープ剥離位置

Tape Removal Position

キャリアテープ引き出し方向

Feed Direction of the Carrier Tape

* Verify the setting conditions when the LEDs are mounted onto a PCB to ensure that the LEDs are mounted onto the PCB

with the correct polarity. If the cathode mark is not able to be easily recognized with a visual inspection,

check the back or side of the LED to determine the polarity.

* The recommended soldering pad pattern is designed for attachment of the LED without problems.

When precise mounting accuracy is required, such as high-density mounting, ensure that the size and shape of the pad

are suitable for the circuit design.

* Consider factors such as the reflow soldering temperature, hand soldering temperature, etc. when choosing the solder.

* When flux is used, it should be a halogen free flux. Ensure that the manufacturing process is not designed in a manner

where the flux will come in contact with the LEDs.

* Make sure that there are no issues with the type and amount of solder that is being used.

* All of the electrode pads are on the backside of this product; solder connections will not be able to be seen nor confirmed

by a normal visual inspection. When using the product, ensure that there are no issues with the soldering conditions.

NICHIA STS-DA1-4391C <Cat.No.170331>

TAPE AND REEL DIMENSIONS

Reel Size: 5000pcs

STS-DA7-9622

数量は1リールにつき 5000個入りです。

Nxxx757x

トレーラ部/リーダ部 Trailer and Leader

Top Cover Tape

引き出し方向

LED装着部

リーダ部最小400mm

トレーラ部最小160mm（空部）

Trailer 160mm MIN(Empty Pockets) Loaded Pockets

エンボスキャリアテープ

Embossed Carrier Tape

トップカバーテープ

Feed

Direction

Leader without Top Cover Tape 400mm MIN

引き出し部最小100mm（空部）

Leader with Top Cover Tape

100mm MIN(Empty Pocket)

The tape packing method complies with JIS C 0806

(Packaging of Electronic Components on Continuous Tapes).

*JIS C 0806電子部品テーピングに準拠しています。

管理番号 No.

(単位 Unit: mm)

リール部 Reel

-0

Φ1.5+0.1

テーピング部 Tape

4±0.1

1.75±0.1

4±0.1

2±0.05

3.5±0.05

8+0.3

-0.1

When the tape is rewound due to work interruptions,

no more than 10N should be applied to

the embossed carrier tape.

The LEDs may stick to the top cover tape.

*実装作業の中断などでエンボスキャリアテープをリールに巻き取る場合、

エンボスキャリアテープを強く(10N以上)締めないで下さい。

LEDがカバーテープに貼り付く可能性があります。

3.18±0.1

0.2±0.05

0.8±0.1

3.18±0.1

Cathode Mark

-0

Φ1+0.2

Φ60+1

-0

11.4±1

-0

9+1

f 13±0.2

f 21±0.8

ラベル

Label

Φ21±0.8

Φ13±0.2

180+0

-3

NICHIA STS-DA1-4391C <Cat.No.170331>

PACKAGING - TAPE & REEL

Nichia LED

STS-DA7-4989

Nxxxxxxx

ラベル Label

管理番号 No.

Reel

リール

熱シール

Seal

Moisture-proof Bag

アルミ防湿袋

RoHS

Nxxxxxxx

XXXX LED

*******

NICHIA CORPORATION 491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN

TYPE

LOT

QTY. YMxxxx-RRR

PCS

RoHS

Nxxxxxxx

XXXX LED

*******

RRR

PCS

TYPE

RANK

QTY.

NICHIA CORPORATION

491 OKA, KAMINAKA, ANAN, TOKUSHIMA, JAPAN

Reels are shipped with desiccants in heat-sealed moisture-proof bags.

シリカゲルとともにリールをアルミ防湿袋に入れ、熱シールにより封をします。

Desiccants

シリカゲル

Moisture-proof bags are packed in cardboard boxes

with corrugated partitions.

アルミ防湿袋を並べて入れ、ダンボールで仕切ります。

ダンボールには防水加工がされておりませんので、梱包箱が水に濡れないよう注意して下さい。

輸送、運搬に際して弊社よりの梱包状態あるいは同等の梱包を行って下さい。

取り扱いに際して、落下させたり、強い衝撃を与えたりしますと、製品を損傷させる原因になりますので注意して下さい。

Using the original package material or equivalent in transit is recommended.

Do not expose to water. The box is not water-resistant.

Do not drop or expose the box to external forces as it may damage the products.

Products shipped on tape and reel are packed in a moisture-proof bag.

They are shipped in cardboard boxes to protect them from external forces during transportation.

*本製品はテーピングしたのち、輸送の衝撃から保護するためダンボールで梱包します。

If not provided, it will not be indicated on the label.

******* is the customer part number.

客先型名が設定されていない場合は空白です。

*客先型名を*******で示します。

参照して下さい。

For details, see "LOT NUMBERING CODE"

in this document.

*ロット表記方法についてはロット番号の項を

The label does not have the RANK field for

un-ranked products.

*ランク分けがない場合はランク表記はありません。

NICHIA STS-DA1-4391C <Cat.No.170331>

LOT NUMBERING CODE

Lot Number is presented by using the following alphanumeric code.

YMxxxx - RRR

Y - Year

Year

2016

2017

2018

2019

2020

2021

M - Month

Month

xxxx-Nichia's Product Number

RRR-Ranking by Color Coordinates, Ranking by Luminous Flux, Ranking by Color Rendering Index

NICHIA STS-DA1-4391C <Cat.No.170331>

DERATING CHARACTERISTICS

NF2x757GR-V1

管理番号 No. STS-DA7-9908

100

150

200

250

300

020 40 60 80 100 120

Derating1

(74, 200)

(100, 85.0)

100

150

200

250

300

020 40 60 80 100 120

Derating2

(95, 200)

(100, 160)

100

200

300

400

500

020 40 60 80 100

Duty

許容順電流

Allowable Forward Current(mA)

はんだ接合部温度(カソード側)-許容順電流特性

Solder Temperature(Cathode Side) vs

Allowable Forward Current

周囲温度-許容順電流特性

Ambient Temperature vs

Allowable Forward Current

許容順電流

Allowable Forward Current(mA)

許容順電流

Allowable Forward Current(mA)

はんだ接合部温度(カソード側)

Solder Temperature(Cathode Side)(°C)

周囲温度

Ambient Temperature(°C)

デューティー比

Duty Ratio(%)

デューティー比-許容順電流特性

Duty Ratio vs

Allowable Forward Current

34°C/W

θJA

R =

=25°C

NICHIA STS-DA1-4391C <Cat.No.170331>

OPTICAL CHARACTERISTICS

NF2W757GR-V1

管理番号 No. STS-DA7-9867A

0.0

0.2

0.4

0.6

0.8

1.0

350 400 450 500 550 600 650 700 750 800

Spectrum

相対照度

Relative Illuminance(a.u.)

90°

80°

70°

60°

50°

40°

30°

20°

10°

0°

-10°

-20°

-30°

-40°

-50°

-60°

-70°

-80°

-90°

Directivity1

発光スペクトル

Spectrum

波長

Wavelength(nm)

指向特性

Directivity

放射角度

Radiation Angle

0.5

* 本特性は演色性ランクR70に対応しています。

The graphs above show the characteristics for R70 LEDs of this product.

150mA

IFP =

=25°C

150mA

IFP =

=25°C

=5000K

相対発光強度(最大強度で正規化)

(Normalized to peak spectral intensity)

Relative Emission Intensity(a.u.)

本特性は参考です。

All characteristics shown are for reference only and are not guaranteed.

パルス駆動により測定しています。

The following graphs show the characteristics measured in pulse mode.

NICHIA STS-DA1-4391C <Cat.No.170331>

OPTICAL CHARACTERISTICS

NF2W757GR-V1

管理番号 No. STS-DA7-9624B

0.0

0.2

0.4

0.6

0.8

1.0

350 400 450 500 550 600 650 700 750 800

Spectrum

相対照度

Relative Illuminance(a.u.)

90°

80°

70°

60°

50°

40°

30°

20°

10°

0°

-10°

-20°

-30°

-40°

-50°

-60°

-70°

-80°

-90°

Directivity1

発光スペクトル

Spectrum

波長

Wavelength(nm)

指向特性

Directivity

放射角度

Radiation Angle

0.5

* 本特性は演色性ランクR8000に対応しています。

The graphs above show the characteristics for R8000 LEDs of this product.

150mA

IFP =

=25°C

150mA

IFP =

=25°C

=5000K

相対発光強度(最大強度で正規化)

(Normalized to peak spectral intensity)

Relative Emission Intensity(a.u.)

本特性は参考です。

All characteristics shown are for reference only and are not guaranteed.

パルス駆動により測定しています。

The following graphs show the characteristics measured in pulse mode.

NICHIA STS-DA1-4391C <Cat.No.170331>

OPTICAL CHARACTERISTICS

NF2W757GR-V1

管理番号 No. STS-DA7-9910A

0.0

0.2

0.4

0.6

0.8

1.0

350 400 450 500 550 600 650 700 750 800

Spectrum

相対照度

Relative Illuminance(a.u.)

90°

80°

70°

60°

50°

40°

30°

20°

10°

0°

-10°

-20°

-30°

-40°

-50°

-60°

-70°

-80°

-90°

Directivity1

発光スペクトル

Spectrum

波長

Wavelength(nm)

指向特性

Directivity

放射角度

Radiation Angle

0.5

* 本特性は演色性ランクR9050に対応しています。

The graphs above show the characteristics for R9050 LEDs of this product.

150mA

IFP =

=25°C

150mA

IFP =

=25°C

=5000K

相対発光強度(最大強度で正規化)

(Normalized to peak spectral intensity)

Relative Emission Intensity(a.u.)

本特性は参考です。

All characteristics shown are for reference only and are not guaranteed.

パルス駆動により測定しています。

The following graphs show the characteristics measured in pulse mode.

NICHIA STS-DA1-4391C <Cat.No.170331>

FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS

NF2W757GR-V1

管理番号 No. STS-DA7-9913A

5.0

5.5

6.0

6.5

7.0

7.5

8.0

-60 -30 0 30 60 90 120 150

TaVf

0.6

0.8

1.0

1.2

1.4

-60 -30 0 30 60 90 120 150

TaIv

100

200

300

400

500

5.0 5.5 6.0 6.5 7.0 7.5 8.0

VfIf

150

ジャンクション温度-相対光束特性

Junction Temperature vs

Relative Luminous Flux

順電流

Forward Current(mA)

0.0

0.5

1.0

1.5

2.0

2.5

3.0

0100 200 300 400 500

IfIv

順電流-相対光束特性

Forward Current vs

Relative Luminous Flux

順電流

Forward Current(mA)

順電圧-順電流特性

Forward Voltage vs

Forward Current

ジャンクション温度-順電圧特性

Junction Temperature vs

Forward Voltage

順電圧

Forward Voltage(V)

順電圧

Forward Voltage(V)

ジャンクション温度

Junction Temperature(°C)

ジャンクション温度

Junction Temperature(°C)

* 本特性は演色性ランクR70に対応しています。

The graphs above show the characteristics for R70 LEDs of this product.

=25°C

IFP=

150mA

IFP=

150mA

相対光束(T =25°Cで正規化)

Relative Luminous Flux(a.u.)

(Normalized at T =25°C)

Relative Luminous Flux(a.u.)

相対光束

=150mA

で正規化

)

(Normalized at I

=150mA)

本特性は参考です。

All characteristics shown are for reference only and are not guaranteed.

パルス駆動により測定しています。

The following graphs show the characteristics measured in pulse mode.

NICHIA STS-DA1-4391C <Cat.No.170331>

FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS

NF2W757GR-V1

管理番号 No. STS-DA7-9625B

5.0

5.5

6.0

6.5

7.0

7.5

8.0

-60 -30 0 30 60 90 120 150

TaVf

0.6

0.8

1.0

1.2

1.4

-60 -30 0 30 60 90 120 150

TaIv

100

200

300

400

500

5.0 5.5 6.0 6.5 7.0 7.5 8.0

VfIf

150

ジャンクション温度-相対光束特性

Junction Temperature vs

Relative Luminous Flux

順電流

Forward Current(mA)

0.0

0.5

1.0

1.5

2.0

2.5

3.0

0100 200 300 400 500

IfIv

順電流-相対光束特性

Forward Current vs

Relative Luminous Flux

順電流

Forward Current(mA)

順電圧-順電流特性

Forward Voltage vs

Forward Current

ジャンクション温度-順電圧特性

Junction Temperature vs

Forward Voltage

順電圧

Forward Voltage(V)

順電圧

Forward Voltage(V)

ジャンクション温度

Junction Temperature(°C)

ジャンクション温度

Junction Temperature(°C)

* 本特性は演色性ランクR8000に対応しています。

The graphs above show the characteristics for R8000 LEDs of this product.

=25°C

IFP=

150mA

IFP=

150mA

相対光束(T =25°Cで正規化)

Relative Luminous Flux(a.u.)

(Normalized at T =25°C)

Relative Luminous Flux(a.u.)

相対光束

=150mA

で正規化

)

(Normalized at I

=150mA)

本特性は参考です。

All characteristics shown are for reference only and are not guaranteed.

パルス駆動により測定しています。

The following graphs show the characteristics measured in pulse mode.

NICHIA STS-DA1-4391C <Cat.No.170331>

FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS

NF2W757GR-V1

管理番号 No. STS-DA7-9916A

5.0

5.5

6.0

6.5

7.0

7.5

8.0

-60 -30 0 30 60 90 120 150

TaVf

0.4

0.6

0.8

1.0

1.2

1.4

-60 -30 0 30 60 90 120 150

TaIv

100

200

300

400

500

5.0 5.5 6.0 6.5 7.0 7.5 8.0

VfIf

150

ジャンクション温度-相対光束特性

Junction Temperature vs

Relative Luminous Flux

順電流

Forward Current(mA)

0.0

0.5

1.0

1.5

2.0

2.5

3.0

0100 200 300 400 500

IfIv

順電流-相対光束特性

Forward Current vs

Relative Luminous Flux

順電流

Forward Current(mA)

順電圧-順電流特性

Forward Voltage vs

Forward Current

ジャンクション温度-順電圧特性

Junction Temperature vs

Forward Voltage

順電圧

Forward Voltage(V)

順電圧

Forward Voltage(V)

ジャンクション温度

Junction Temperature(°C)

ジャンクション温度

Junction Temperature(°C)

* 本特性は演色性ランクR9050に対応しています。

The graphs above show the characteristics for R9050 LEDs of this product.

=25°C

IFP=

150mA

IFP=

150mA

相対光束(T =25°Cで正規化)

Relative Luminous Flux(a.u.)

(Normalized at T =25°C)

Relative Luminous Flux(a.u.)

相対光束

=150mA

で正規化

)

(Normalized at I

=150mA)

本特性は参考です。

All characteristics shown are for reference only and are not guaranteed.

パルス駆動により測定しています。

The following graphs show the characteristics measured in pulse mode.

NICHIA STS-DA1-4391C <Cat.No.170331>

FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS

NF2W757GR-V1

管理番号 No. STS-DA7-9918B

0.34

0.35

0.36

0.37

0.38

0.32 0.33 0.34 0.35 0.36

Taxy

-40˚C

0˚C

25˚C

100˚C

120˚C

0.34

0.35

0.36

0.37

0.38

0.32 0.33 0.34 0.35 0.36

Ifxy

20mA

150mA

400mA

ジャンクション温度-色度特性

Junction Temperature vs

Chromaticity Coordinate

順電流-色度特性

Forward Current vs

Chromaticity Coordinate

* 本特性は演色性ランクR70に対応しています。

The graphs above show the characteristics for R70 LEDs of this product.

=25°C

=5000K

150mA

IFP =

=5000K

本特性は参考です。

All characteristics shown are for reference only and are not guaranteed.

パルス駆動により測定しています。

The following graphs show the characteristics measured in pulse mode.

NICHIA STS-DA1-4391C <Cat.No.170331>

FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS

NF2W757GR-V1

管理番号 No. STS-DA7-9626C

0.34

0.35

0.36

0.37

0.38

0.32 0.33 0.34 0.35 0.36

Taxy

-40˚C

0˚C

25˚C

100˚C

120˚C

0.34

0.35

0.36

0.37

0.38

0.32 0.33 0.34 0.35 0.36

Ifxy

20mA

150mA

400mA

ジャンクション温度-色度特性

Junction Temperature vs

Chromaticity Coordinate

順電流-色度特性

Forward Current vs

Chromaticity Coordinate

* 本特性は演色性ランクR8000に対応しています。

The graphs above show the characteristics for R8000 LEDs of this product.

=25°C

=5000K

150mA

IFP =

=5000K

本特性は参考です。

All characteristics shown are for reference only and are not guaranteed.

パルス駆動により測定しています。

The following graphs show the characteristics measured in pulse mode.

NICHIA STS-DA1-4391C <Cat.No.170331>

FORWARD CURRENT CHARACTERISTICS / TEMPERATURE CHARACTERISTICS

NF2W757GR-V1

管理番号 No. STS-DA7-9919B

0.33

0.34

0.35

0.36

0.37

0.32 0.33 0.34 0.35 0.36

Taxy

-40˚C

0˚C

25˚C

100˚C

120˚C

0.33

0.34

0.35

0.36

0.37

0.32 0.33 0.34 0.35 0.36

Ifxy

20mA

150mA

400mA

ジャンクション温度-色度特性

Junction Temperature vs

Chromaticity Coordinate

順電流-色度特性

Forward Current vs

Chromaticity Coordinate

* 本特性は演色性ランクR9050に対応しています。

The graphs above show the characteristics for R9050 LEDs of this product.

=25°C

=5000K

150mA

IFP =

=5000K

本特性は参考です。

All characteristics shown are for reference only and are not guaranteed.

パルス駆動により測定しています。

The following graphs show the characteristics measured in pulse mode.

NICHIA STS-DA1-4391C <Cat.No.170331>

RELIABILITY

(1) Tests and Results

Test

Reference

Standard

Test Conditions

Test

Duration

Failure

Criteria

Units

Failed/Tested

Resistance to

Soldering Heat

(Reflow Soldering)

JEITA ED-4701

300 301

Tsld=260°C, 10sec, 2reflows,

Precondition: 30°C, 70%RH, 168hr

0/22

Solderability

(Reflow Soldering)

JEITA ED-4701

303 303A

Tsld=245±5°C, 5sec,

Lead-free Solder(Sn-3.0Ag-0.5Cu)

0/22

Temperature Cycle

JEITA ED-4701

100 105

-40°C(30min)~25°C(5min)~

100°C(30min)~25°C(5min)

100cycles

0/50

Moisture Resistance

(Cyclic)

JEITA ED-4701

200 203

25°C~65°C~-10°C, 90%RH,

24hr per cycle

10cycles

0/22

High Temperature

Storage

JEITA ED-4701

200 201

TA=100°C

1000hours

0/22

Temperature Humidity

Storage

JEITA ED-4701

100 103

TA=60°C, RH=90%

1000hours

0/22

Low Temperature

Storage

JEITA ED-4701

200 202

TA=-40°C

1000hours

0/22

Room Temperature

Operating Life

Condition 1

TA=25°C, IF=150mA

Test board: See NOTES below

1000hours

0/22

Room Temperature

Operating Life

Condition 2

TA=25°C, IF=200mA

Test board: See NOTES below

500hours

0/22

High Temperature

Operating Life

TA=100°C, IF=85mA

Test board: See NOTES below

1000hours

0/22

Temperature Humidity

Operating Life

60°C, RH=90%, IF=150mA

Test board: See NOTES below

500hours

0/22

Low Temperature

Operating Life

TA=-40°C, IF=150mA

Test board: See NOTES below

1000hours

0/22

Vibration

JEITA ED-4701

400 403

200m/s2, 100~2000~100Hz,

4cycles, 4min, each X, Y, Z

48minutes

0/22

Electrostatic Discharges

JEITA ED-4701

300 304

HBM, 2kV, 1.5kΩ, 100pF, 3pulses,

alternately positive or negative

0/22

Board Bending

1bend to a deflection of 2mm

for 5±1sec

0/22

Soldering Joint Shear

Strength

JEITA ED-4702B

002 3

5N, 10±1sec

0/22

NOTES:

1) Test board: FR4 board thickness=1.6mm, copper layer thickness=0.07mm, RθJA≈34°C/W

The Board Bending is performed using an exclusive test board.

2) Measurements are performed after allowing the LEDs to return to room temperature.

(2) Failure Criteria

Criteria #

Items

Conditions

Failure Criteria

Forward Voltage(VF)

IF=150mA

>U.S.L.×1.1

Luminous Flux(ΦV)

IF=150mA

<L.S.L.×0.7

Solderability

Less than 95% solder coverage

Appearance

The light emission is abnormal

U.S.L. : Upper Specification Limit L.S.L. : Lower Specification Limit

NICHIA STS-DA1-4391C <Cat.No.170331>

CAUTIONS

(1) Storage

Conditions

Temperature

Humidity

Time

Storage

Before Opening Aluminum Bag

≤30°C

≤90%RH

Within 1 Year from Delivery Date

After Opening Aluminum Bag

≤30°C

≤70%RH

≤168hours

Baking

65±5°C

≥24hours

● Product complies with JEDEC MSL 3 or equivalent. See IPC/JEDEC STD-020 for moisture-sensitivity details.

● Absorbed moisture in LED packages can vaporize and expand during soldering, which can cause interface delamination

and result in optical performance degradation. Products are packed in moisture-proof aluminum bags

to minimize moisture absorption during transportation and storage.

Included silica gel desiccants change from blue to red if moisture had penetrated bags.

● After opening the moisture-proof aluminum bag, the products should go through the soldering process

within the range of the conditions stated above. Unused remaining LEDs should be stored with silica gel desiccants

in a hermetically sealed container, preferably the original moisture-proof bags for storage.

● After the “Period After Opening” storage time has been exceeded or silica gel desiccants are no longer blue,

the products should be baked. Baking should only be done once.

● Customer is advised to keep the LEDs in an airtight container when not in use. Exposure to a corrosive environment

may cause the plated metal parts of the product to tarnish, which could adversely affect soldering and optical characteristics.

It is also recommended to return the LEDs to the original moisture proof bags and reseal.

● After assembly and during use, silver plating can be affected by the corrosive gases emitted by components and materials

in close proximity of the LEDs within an end product, and the gases entering into the product from the external atmosphere.

The above should be taken into consideration when designing.

Resin materials, in particular, may contain substances which can affect silver plating, such as halogen.

● Do not use sulfur-containing materials in commercial products. Some materials, such as seals and adhesives, may contain sulfur.

The extremely corroded or contaminated plating of LEDs might cause an open circuit. Silicone rubber is recommended

as a material for seals. Bear in mind, the use of silicones may lead to silicone contamination of electrical contacts

inside the products, caused by low molecular weight volatile siloxane.

● To prevent water condensation, please avoid large temperature and humidity fluctuations for the storage conditions.

● Do not store the LEDs in a dusty environment.

● Do not expose the LEDs to direct sunlight and/or an environment where the temperature is higher than

normal room temperature.

(2) Directions for Use

● When designing a circuit, the current through each LED must not exceed the Absolute Maximum Rating.

Operating at a constant current per LED is recommended. In case of operating at a constant voltage, Circuit B is recommended.

If the LEDs are operated with constant voltage using Circuit A, the current through the LEDs may vary due to the variation

in Forward Voltage characteristics of the LEDs.

(A)

...

(B)

...

● This product should be operated using forward current. Ensure that the product is not subjected to

either forward or reverse voltage while it is not in use. In particular, subjecting it to continuous reverse voltage

may cause migration, which may cause damage to the LED die. When used in displays that are not used for a long time,

the main power supply should be switched off for safety.

● It is recommended to operate the LEDs at a current greater than 10% of the sorting current to stabilize the LED characteristics.

● Ensure that excessive voltages such as lightning surges are not applied to the LEDs.

● For outdoor use, necessary measures should be taken to prevent water, moisture and salt air damage.

NICHIA STS-DA1-4391C <Cat.No.170331>

(3) Handling Precautions

● Do not handle the LEDs with bare hands as it will contaminate the LED surface and may affect the optical characteristics:

it might cause the LED to be deformed and/or the wire to break, which will cause the LED not to illuminate.

● When handling the product with tweezers, be careful not to apply excessive force to the resin.

Otherwise, The resin can be cut, chipped, delaminate or deformed, causing wire-bond breaks and catastrophic failures.

● Dropping the product may cause damage.

● Do not stack assembled PCBs together. Failure to comply can cause the resin portion of the product to be cut, chipped,

delaminated and/or deformed. It may cause wire to break, leading to catastrophic failures.

● CRI Rank R9050 LEDs in this specification use materials that contain halogen-based compounds;

the halogen element found in these materials will not affect the LEDs when the LEDs are used under the conditions

specified in this specification. The other CRI ranks in this specification do not use these materials.

● Due to the variation in the amount of the reflective material (white resin) that is coating the protection device,

the area around the protection device may appear to be a black spot; this will not affect the characteristics of the LED.

Do not use the location of the protection device to determine the polarity of the LED; use the cathode mark.

(4) Design Consideration

● PCB warpage after mounting the products onto a PCB can cause the package to break.

The LED should be placed in a way to minimize the stress on the LEDs due to PCB bow and twist.

● The position and orientation of the LEDs affect how much mechanical stress is exerted on the LEDs placed near the score lines.

The LED should be placed in a way to minimize the stress on the LEDs due to board flexing.

● Board separation must be performed using special jigs, not using hands.

● Volatile organic compounds that have been released from materials present around the LEDs (e.g. housing, packing,

adhesive, secondary lens, lens cover, etc.) may penetrate the LED lens and/or encapsulating resin.

If the LEDs are being used in a hermetically sealed environment, these volatile compounds can discolor after being exposed

to heat and/or photon energy and it may greatly reduce the LED light output and/or cause a color shift.

In this case, ventilating the environment may improve the reduction in light output and/or color shift.

Perform a light-up test of the chosen application for optical evaluation to ensure that there are no issues,

especially if the LEDs are planned to be used in a hermetically sealed environment.

(5) Electrostatic Discharge (ESD)

● The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability.

When handling the products, the following measures against electrostatic discharge are strongly recommended:

Eliminating the charge

Grounded wrist strap, ESD footwear, clothes, and floors

Grounded workstation equipment and tools

ESD table/shelf mat made of conductive materials

● Ensure that tools (e.g. soldering irons), jigs and machines that are being used are properly grounded and

that proper grounding techniques are used in work areas. For devices/equipment that mount the LEDs,

protection against surge voltages should also be used.

● If tools or equipment contain insulating materials such as glass or plastic,

the following measures against electrostatic discharge are strongly recommended:

Dissipating static charge with conductive materials

Preventing charge generation with moisture

Neutralizing the charge with ionizers

● The customer is advised to check if the LEDs are damaged by ESD

when performing the characteristics inspection of the LEDs in the application.

Damage can be detected with a forward voltage measurement or a light-up test at low current (≤1mA).

● ESD damaged LEDs may have current flow at a low voltage or no longer illuminate at a low current.

Failure Criteria: VF<4.0V at IF=0.5mA

NICHIA STS-DA1-4391C <Cat.No.170331>

(6) Thermal Management

● Proper thermal management is an important when designing products with LEDs. LED die temperature is affected

by PCB thermal resistance and LED spacing on the board. Please design products in a way that the LED die temperature

does not exceed the maximum Junction Temperature (TJ).

● Drive current should be determined for the surrounding ambient temperature (TA) to dissipate the heat from the product.

● The following equations can be used to calculate the LED temperature (i.e. TJ) once the saturation temperature

at the junction has been reached.

1) TJ=TA+RθJA･W 2) TJ=TS+RθJS･W

*TJ=LED junction temperature: °C

TA=Ambient temperature: °C

TS=Soldering temperature (cathode side): °C

RθJA=Thermal resistance from junction to ambient: °C/W

RθJS=Thermal resistance from junction to TS measurement point: °C/W

W=Input power(IF×VF): W

TS Measurement Point

(7) Cleaning

● The LEDs should not be cleaned with water, benzine, and/or thinner.

● If required, isopropyl alcohol (IPA) should be used. Other solvents may cause premature failure to the LEDs

due to the damage to the resin portion. The effects of such solvents should be verified prior to use.

In addition, the use of CFCs such as Freon is heavily regulated.

● When dust and/or dirt adheres to the LEDs, soak a cloth with Isopropyl alcohol (IPA), then squeeze it before wiping the LEDs.

● Ultrasonic cleaning is not recommended since it may have adverse effects on the LEDs

depending on the ultrasonic power and how LED is assembled.

If ultrasonic cleaning must be used, the customer is advised to make sure the LEDs will not be damaged prior to cleaning.

(8) Eye Safety

● In 2006, the International Electrical Commission (IEC) published IEC 62471:2006 Photobiological safety of lamps

and lamp systems, which added LEDs in its scope.

On the other hand, the IEC 60825-1:2007 laser safety standard removed LEDs from its scope.

However, please be advised that some countries and regions have adopted standards

based on the IEC laser safety standard IEC 60825-1:20112001, which still includes LEDs in its scope.

Most of Nichia's LEDs can be classified as belonging into either the Exempt Group or Risk Group 1.

High-power LEDs, that emit light containing blue wavelengths, may be classified as Risk Group 2.

Please proceed with caution when viewing directly any LEDs driven at high current, or viewing LEDs

with optical instruments which may greatly increase the damages to your eyes.

● Viewing a flashing light may cause eye discomfort. When incorporating the LED into your product,

please be careful to avoid adverse effects on the human body caused by light stimulation.

NICHIA STS-DA1-4391C <Cat.No.170331>

(9) Miscellaneous

● Nichia warrants that the discrete LEDs will meet the requirements/criteria as detailed in the Reliability section

within this specification. If the LEDs are used under conditions/environments deviating from or inconsistent

with those described in this specification, the resulting damage and/or injuries will not be covered by this warranty.

● Nichia warrants that the discrete LEDs manufactured and/or supplied by Nichia will meet the requirements/criteria

as detailed in the Reliability section within this specification; it is the customer’s responsibility

to perform sufficient verification prior to use to ensure that the lifetime and other quality characteristics required

for the intended use are met.

● The applicable warranty period is one year from the date that the LED is delivered. In the case of any incident that appears

to be in breach of this warranty, the local Nichia sales representative should be notified to discuss instructions

on how to proceed while ensuring that the LED in question is not disassembled or removed from the PCB

if it has been attached to the PCB. If a breach of this warranty is proved, Nichia will provide the replacement for the

non-conforming LED or an equivalent item at Nichia’s discretion. FOREGOING ARE THE EXCLUSIVE REMEDIES AVAILABLE

TO THE CUSTOMER IN RESPECT OF THE BREACH OF THE WARRANTY CONTAINED HEREIN,

AND IN NO EVENT SHALL NICHIA BE RESPONSIBLE FOR ANY INDRECT, INCIDENTAL OR CONSEQUENTIAL LOSSES

AND/OR EXPENSES (INCLUDING LOSS OF PROFIT) THAT MAY BE SUFFERED BY THE CUSTOMER ARISING OUT OF A BREACH

OF THE WARRANTY.

● NICHIA DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

● This LED is intended to be used for general lighting, household appliances, electronic devices (e.g. mobile communication

devices); it is not designed or manufactured for use in applications that require safety critical functions (e.g. aircraft, automobiles,

combustion equipment, life support systems, nuclear reactor control system, safety devices, spacecraft, submarine repeaters,

traffic control equipment, trains, vessels, etc.). If the LEDs are planned to be used for these applications,

unless otherwise detailed in the specification, Nichia will neither guarantee that the LED is fit for that purpose nor be

responsible for any resulting property damage, injuries and/or loss of life/health.

This LED does not comply with ISO/TS 16949 and is not intended for automotive applications.

● The customer will not reverse engineer, disassemble or otherwise attempt to extract knowledge/design information

from the LED.

● All copyrights and other intellectual property rights in this specification in any form are reserved by Nichia

or the right holders who have granted Nichia permission to use the content. Without prior written permission from Nichia,

no part of this specification may be reproduced in any form or by any means.

● Both the customer and Nichia will agree on the official specifications for the supplied LEDs

before any programs are officially launched. Without this agreement in writing (i.e. Customer Specific Specification),

changes to the content of this specification may occur without notice (e.g. changes to the foregoing specifications

and appearance, discontinuation of the LEDs, etc.).