R200 b- 67 HH {127 MN Cc B SA, \DS4 panain SCALE #1 Lovo ALL AROUND , 1 . R (647) 2050 HN_ALL AROUND FOR se, - MATING CONNECTOR, SHROUD CLEARANCE DETAILA 1 SCALE 104 DATIM / \ACKAGING FRAME, / P DATIM B n c DETAL = SCALE 10:1 = 2X 17.00 MN @ APPLIES 2X SEE KEYING OPTION VIEWS FOR POSITIONS x 300 Bisee a) Pal |+ [523] DATUM B A -12.90 | 250/933 AT TANGENT SEE DETAIL A 088 | B23 [ADDED DRAFT DIRECTION SYMBOL | 3-25-11 08s | B22 | ADDED REF DIMENSION FOR Bott an83 4x 10905 LATCH HEIGHT DATUM B. < A I [ fp{0204 088 | B21 |REMOVED THE WORD OPTION* 32H = AT VIEW OF BACK ANGLE = 088 | 620 | CHANGED FROM 179 TO 180 31-11 SEE DETAIL D 088 | B19 ADDED 4x 10.805)[S[ozo@ABIAT BASH] +u-11 [ANDI@IO30@IABIAT TIP FOR 28 BLADE TERMNALS, a 088 | B18 [CHANGED 16x TO 12x FOR THE 15 | 4-11 one BLADE TERMNALS SURFACE MUST BE FREE SE DEEECTS ANG PARTE | 088 | B17 [UPDATED CONNECTOR COLORS 6-11 ALL AROUND oss | B16 5-04-10 tox 930882 088 | B15 [REMOVED |/[o.10@)AB| 504-0 5 068 [B14 [REMOVED SHORTING BAR NOTE 50-10 x 05533, 088 | B13 | UPDATED NOTE 6 REMOVED REV F | soon SECTION ACA 066 | Biz [ADDED NOTE 9 505-10 088 | B11 [ADDED DM 135+0,10/-0.20 MEASURED| 5-1-1 PAT 2 La] 088 | B10 [ADDED SEE NOTE & S000 KEYING OPTION D 088 | B9 [250 WAS 2.80. ADDED (280-TOoM | S-+-0 NOTES: UNLESS OTHERWISE SPEOFED 50E-0 J 4, DRAFT ANGLE PERMISSBLE 0.25MAXINUM, 088 | B7 [ADDED flo20 AB] +60 2. ALL DIMENSIONS SHOWN IN MILLIMETERS. 088 |_B [ADDED DIM [6.43] $0410 3. DIMENSIONING AND TOLERANONG PER ASME Y14.5M-1994 088 | BS JADDED SEC C-C 5-04-10 4 RADI ON ALL CORNERS SHOWN SHARP OR ALL 068 | B4 [UPDATED SEC B-B 504-0 UNSPEGFED RADI 0.25 EXCEPT AS NOTED. : I esmsoas Tosa | 63 Tappep DeTAL D sane 5. STANDARD COLORS FOR POLARIZATION (SEE CHART). one r faa Tl Ba] DEVATION REQURES APPROVAL OF AUTHORIZED PERSON, 1088 | BZ | ADDED SEC _C-C 5-0 6. A FULL SHROUD ON THE MATING CONNECTOR IS REQURED p 088 | B1_| ADDED DIM 0.702015 ALL AROUND | 5-04-10 ane See aS PeScane ae eae ae Texan eet 2} Beeasee see} PINS, REFER TO *SAE/USCAR-12 CONNECTOR DESIGN | BE LET REVISION RECORD DATE | DWN | CHK GUNDE LINES" FOR ADDITIONAL INFORMATION. 1400 7. REFER TO USCAR/EWCAP PART LIST AS FOUND ON WEBSITE DATUM &- itp /wwwwecorteame.org No 4 H YELLOW MOzzz7e 7772 PILES 8. FOR BLADE TERMNAL DESIGN INFORMATION PILPPIIOP IIAP INIT IT ITY] YELLOW 5 B12) 9. THIS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA F YELLOW 1S THE MASTER FOR THIS PART, FOR DIMENSIONAL OR ANY INFORMATION : NOT SHOWN ON THIS DRAWING, ANALYZE THE CAD MODEL. = = __| @ SECTION C-C_ @ oso BLACK ee a AT DATUM ROL CONTROIED BY ECAP. NO ELASTIC nog fl ~ DIRECT CONNECT INTERFACE ; SCALE 3:1 FEATURES MAY EXTEND ABOVE THS SURFACE aL mole 16 WAY (2 X 8) 15 MM SEALED MALE a = i A BLAKK SECTION B-8 @ QA Fe e9-s016-2-202 Pe re e OPTION Fa CTR SCALE 31 LJ | Ls] LJ | LJMX150 16 WAY HYBRID RCPTACLE SEALED CONNECTOR - SHORTING (SHRT) BAR UNLESS COMPONENT NOTED, SEE STANDARD ASSEMBLY TABLE OF CONTENTS SHEET NO] SHEET DESCRIPTION 1 NOTES 2 KEY CONFIGURATIONS 3 RECEPTACLE SEALED ASSEMBLY 4-6 BOM NOTES: VALID UNLESS OTHERWISE SPECRED L GENERAL: a. APPLICATION SPECIFICATION SEE: AS-35472-100 CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, CONNECTOR ASSEMBLY. PACKAGING INFORMATION. CONNECTOR MATING, SERVICE INSTRUCTIONS, ELECTRICAL CONTINUTY CHECKING, CRIMPING, AND TROUBLESHOOTING. -STANDARD (NON-SHRT) CONFIGURATIONS DESIGNED TO MATE WITH DEVICE CONNECTION AS SPECIFED IN DRAWING EWCAP 999-S-016-2-202, AVALIBLE AT hitpy//awcapuecarteanaorg/. -STANDARD (NON-SHRT) CONFIGURATIONS AND SHORTING BAR CONFIGURATIONS DESIGNED TO MATE WITH BLADE HOUSING ASSEMBLY SPECIRED IN DRAWING SD-33486-161. -FOR 15mm RECEPTACLE TERMINALS TO BE USED WITH THIS ASSEMBLY. SEE MOLEX DRAWING SD-33012-002. ~15nm TERMINALS TO BE USED WITH WIRE WITHN DIAMETER RANGE OF 14mm TO 2.5mm. -FOR 28am RECEPTACLE TERMINALS TO BE USED WITH THS ASSEMBLY SEE TABLE. -2.81m TERMNALS TO GE USED WITH WIRE WITHIN DIAMETER RANGE OF 150mm TO 3.300. -ASSEMBLY SHIPPED WITH PLR AND CPA IN PRE-LOCK POSITION (SEE SECTION 2-Z PRE-LOCK) -N THE EVENT THAT THE PLR IS FOUND IN THE SEATED (FINAL LOCK) POSITION, REFER TO MOLEX SPECIFICATION PS-34646-001, AVAILABLE AT weemolax.com <hitpe//wwwumolax.com> ASSEMBLY CONFORMS TO SAE/USCAR-2 REV.4 WITH THE FOLLOWING EXCEPTIONS: ENGAGEMENT FORCE TO MOVE CPA FROM PRE-LOCK TO FINAL LOCK POSITION WHEN UNHATED: 40N MIN DISENGAGEMENT FORCE TO MOVE CPA FROM FINAL LOCK TO PRE-LOCK POSITION: SN MIN. 40N MAX. -TERMINAL INSERTION FORCE FOR WIRE DIAMETER ABOVE 2Sam NOT EXCEEDING 2.69mm SHALL NOT EXCEED 40 NEWTONS. b. PRODUCT SPECIFICATION SEE: PS-33476-000 c PACKAGING SPECIFICATION PER MOLEX DRAWING: PK-30907-895, CONTAINS: PRODUCT INTRODUCTION, PRODUCT SUMMARY, RATINGS (CURRENT, TEMPERATURE, SEALING, AND FLAMMABILITY), AND PRODUCT VALIDATION. th, Re 1.frome_E_P_AM_T v. G 2012/01/11 d. PARTS MUST BE IN COMPLIANCE TO MOLEX CHEMCAL SUBSTANCES FOR BC |_UPDATED TO PLANNED OBSOLESCENCE _| g PRODUCTS SPEUFICATION: ES-40000-5016 BE __7_ADD NEW P/N 33476-2345 THRU 33476-2348 @. DATA MUST BE SUSMTTED UNDER THE MOLEX PART NUMBER TO MDS BAW _}_ADD NeW P/N 33476-2349 THRU 33476-2344 | (COMPANY [b#13255) BAS | _ADD NEW P/N 33476-2338 THRU 33476-2342} f. FOR INFORMATION ON 16 WAY HYBRID RECEPT HRN ASSY WITHOUT CLIPSLOT SEE E-33476-461 BAG CHANGE _TO_PK-30907-895 BA7 ADD NEW P/N 33476-2336 THRU 33476-2337 2 DESIGN | HATERALS! Bs NPN SER | a SEE BOM T BAS | ADD NEW P/N 33476-2377 THRU 2331 3 - GEOM BAR ADD NEW P/N 33476-2314 THRU 2326 a. THS IS A 100% CAD GENERATED PART. THE CAD MATHEMATICAL DATA [Beets nen Bn sere 1S THE MASTER FOR THS PART, FOR DIMENSIONAL OR ANY INFORMATION BA ADD NEW P/N 33476-2310 33476-2511 NOT SHOWN ON THS DRAWING, ANALYZE THE CAD MODEL. AZ10__ | ADD NEW PIN 33476-2308 33476-2309 1 b. GEOMETRIC DIMENSIONS AND TOLERANCES PER ASME Y165M - 1994 ADD NEW PIN 53476-2505 35476-2506 . EDGES AND UNDMENSIONED DETAILS PER ISO715 Azs 33476-2307 @ LETTERNE SHALL BE O15 MAK RAGED INOS MAX RECESS PAD, Are s00 NeW Fn 35476-2306 THSS INCLUDES RECYCLING CODE, CAVITY ID, VENDOR IDENTIFICATION, AZ7_| ADD NEW P/N 33476-2303 AND CUSTOMER MATERIAL NUMBER. AZ6 ADD NEW P/N 33476-2301 33476-2302 . f, VISUAL DEFECTS SHALL MEET COSMETIC STANDARD PS-<5499-002 (Cines 8) AZS_|_ADD NEW P/N 33476-2295 33476-2500 9. LASER MARKING: TBD Az ADD NEW P/N 33476-2294 AZS___ | ADD NEW PIN 33476-2292 33476-2293 | ADD NEW P/N 33476-2285 33476-2286 azz 33476-2287 33476-2288 33476-2289 33476-2290 33476-2201 AzI "ADD NEW P/N 33476-2283 334762786 AZ "ADD NEW P/N 33476-2279 33476-2280 AY? ADD NEW P/N 33476-2278 Avis | ADO NEW PIN 38476-2075 53476-2276 , 33676-2277 AY15 | ADD NEW P/N 33476-2273 33476-2276 "ADD NEW PIN 33476-2265 33476-2266 | TYCO 2.8mm AY 33476-2267 33476-2268 33476-2269 33476-2270 CABLE SEAL TERMINAL : AY | ADD NEW PIN 33476-2269 33476-2266 FORD P/N GRIP "AY12 _| ADD NEW P/N 33476-2262 FEMALE SIZE AY | ADD NEW P/N 33476-2261 i RECEPTACLE Ay10__| ADD NEW P/N 33476-2260 TF -14474-KA, 2 "ADD NEW P/N 58476-2257 53476-2250 IFIT=14474-JA 14 AYP 33476-2259 . SES % AY8 | UPDATED 260M WRE SZE = INSPECTION NUMBER LOG 7Y7 | UPDATED WE SIZE IFIT~14474-GA 45 LAST NUMBER USED: IFIT=44474-FA 20 abo AY6__|_ ADD NEW P/N 33476-2755 33476-2256 IFIT-14474-EA 22 REMOVED: AYS | ADD NEW P/N 33676-2256 AY4 | ADD NEW P/N 33676-2259 c REV DESCRIPTION = QUALITY] GENERAL TOLERANCES DRENSON STYLE SCALE] DESEN UTS THIRD ANGLE Z ==8| |ymos| UNLESS SPECIFIED) MM ONLY 31 | METRIC |CIpROIECTION 2o8 mm INCH __| GRAWN EY DATE BRRSEl E70 [RACES eK CUNNINGHAM 2011/0724 MX150_ 46 WAY HYBRID . ae SS ReCeDey were RECPT SEALED ASSEMBLY meee |e\WO [2 pacestor0 CLIPSLOT aS Basle 1 PLACE [03 APPROVED BY DATE = er es 0 PLACE E mi pssael ANGULAR + 3 SEE] Ayese DRAFT WHERE APPLICABLEL, SEE BOM SD-33476-161 1 OF 7 Wao MUST REMAIN THIS DRAWING CONTAINS INFORMATION THAT IS PROPRETARY TO MOLEX BC FI WITHIN DIMENSIONS E INCORPORATED AND SHOULD NOT BE WITHOUT WRITTEN | , | a 7 | s | a a a z 1KEY CONFIGURATIONS GENERAL TOLERANCES THIRD. ANGLE 3 eo {UNLESS SPECIFIED) MM ONLY 4A METRIC |OC] PROJECTION 2 INCH DRAWN BY DATE TTL BB NYO [PLACES SU KCUNN INGHAM 2011/10/26 MX150 16 WAY HYBRID es [PLACES | --|+->|oe0e BY DATE] RECPT SEALED ASSEMBLY as N/-O [2 PLACESi+ 010 _[2 =o7E CLIPSLOT 2 TPLACE [03 _|=-- Bis WO [oprace 3 = m $s ANGULAR + 3 ERAT . SHEET NO oes DRAFT WHERE APPLICABLE! SEE BOM SD-33476-161 20F7 to MUST REMAIN THS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX Bi WITHIN DIMENSIONS E INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMSSION| Bfarese rN T z a a z , . v " . * . a 1 | 2 | , | 5 , | 4 4 2 1OPTIONAL LASER MARKING ON THIS SURFACE SEE NOTE 3g TERMINAL POSITION 2 TERMINAL POSITION 7 \ / {hh ___ TERMINAL POSITION 1 \ -TERMINAL POSITION 8 \ J F y ! 1 \ ifn efi! a . POSTON { ! 7 I wif ~ Go TERMINAL POSITION 9- TERMINAL POSITION 1% TERMINAL POSITION 10 ~ T TERMINAL POSITION 15 [A Y= v7 36.9540.70 ee . 7 LOCATION CODE- RECYCLE CODE MOLD CAVITY cooE___\ [- i > Liv, \ = / | ij ji | J ~ 4.002050 Re SS SSIWG | IWS aa Cho / ics SS = GF A mS = LOSS g QUALITY] GENERAL TOLERANCES DENSON STYLE SCALE DESIGN UNTS: THIRD. ANGLE ted 3_5 SYMBOLS] (UNLESS SPECIFIED) aM ONLY 1 44 | METRIC lo CU PROJECTION >_~ aie VW tae CUNNINGHAM 2011/10/26 MX150 46 WAY HYBRID PRIMARY LOCK REINFORCEMENT (PLR) SHOWN PRIMARY LOCK REINFORCMENT (PLR) SHOWN ae 2 [3 PLACES|+- [+--~ [CHECKED BY DATE RECPT SEALED ASSEMBLY N CRe-SIARD osroN peer posren Ree W-0 B PLACES E10 Eo== CLIPSLOT = - a 1 EO, f-- aSee WO TPA TE E molex wo2d ANGULAR + 3 MATERIAL NO. NO. SHEET NO. Binks DRAFT WHERE APPLICABLE|___ SEE _BOM SD-33476-181 3 0F 7 Maw MUST REMAIN SIZE| THIS DRAWING CONTAINS NFORMATION THAT IS PROPRETARY TO MOLEX BC WITHIN DIMENSIONS E INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION Prone a 2 a = . . v * s * | 5 : 2 1a u a z a z . . v s * . 2 a 2 , a 7 s 3 4 3 2 1 BOM SHEET 1 ASSEMBLY DESCRIPTION LEGEND TABLE DESCRIPTION COLOR BOM/APPLICABLE COMPONENTS TABLE MM ONLY METRIC INGHAM MX150 RECPT DESCRIPTION NO: UAU2016-0550BOM SHEET 2 PLANNED OBSOLESCENCE SEE DRAWING SD-34985-8002 FOR REPLACEMENT P/N'S B498S-XXXX ASSEMBLY PART NUMBER: ASSEMBLY DESCRIPTION LEGEND TABLE DESCRIPTION COLOR BOM/APPLICABLE COMPONENTS TABLE MM ONLY METRIC _|OC] INGHAM 2011/ MX150 Y RECPT DESCRIPTION NO: UAU2016-0550BOM SHEET 3 PLANNED OBSOLESCENCE SEE DRAWING SD-34985-6002 FOR REPLACEMENT P/NS 34985-XXXX LEGEND TABLE DESCRIPTION COLOR BOM/APPLICABLE COMPONENTS TABLE MM ONLY METRIC [OC] MX150 Y RECPT DESCRIPTION NO: VAU2016-0550PLANNED OBSOLESCENCE SEE DRAWING SD-34985-8002 FOR REPLACEMENT P/N'S B4985-XXXX LEGEND TABLE DESCRIPTION COLOR BOM/APPLICABLE COMPONENTS TABLE MM ONLY 41 | MeTRC |OC] NGHAM 2011/ MX150 16 WAY HYBRID RECPT Y DESCRIPTION NO: UAU2016-0550