GBPC12, GBPC15, GBPC25 & GBPC35 Vishay General Semiconductor Glass Passivated Single-Phase Bridge Rectifier FEATURES GBPC-W GBPC * UL recognition file number E54214 * Universal 3-way terminals: snap-on, wire wrap-around, or P.C.B. mounting e4 * Typical IR less than 0.3 A * High surge current capability * Low thermal resistance * Solder dip 260 C, 40 s * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC ~ ~ ~ ~ ~ TYPICAL APPLICATIONS General purpose use in ac-to-dc bridge full wave rectification for power supply, home appliances, office equipment, industrial automation applications. ~ MECHANICAL DATA Case: GBPC, GBPC-W Epoxy meets UL 94V-0 flammability rating Terminals: Nickel plated on faston lugs or silver plated on wire leads, solderable per J-STD-002 and JESD22-B102. E4 suffix for consumer grade. Suffix letter "W" added to indicate wire leads (e.g. GBPC12005W). Polarity: As marked, positive lead by belevled corner Mounting Torque: 20 inches-lbs. max. PRIMARY CHARACTERISTICS IF(AV) 12 A, 15 A, 25 A, 35 A VRRM 50 V to 1000 V IFSM 200 A, 300 A, 300 A, 400 A IR 5 A VF 1.1 V TJ max. 150 C MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL GBPC12, 15, 25, 35 005 01 02 04 06 08 10 UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC blocking voltage Maximum average forward rectified output current (Fig. 1) GBPC12 GBPC15 GBPC25 GBPC35 IF(AV) 12 15 25 35 A Peak forward surge current single sine-wave superimposed on rated load GBPC12 GBPC15 GBPC25 GBPC35 IFSM 200 300 300 400 A Rating (non-repetitive, for t greater than 1 ms and less than 8.3 ms) for fusing GBPC12 GBPC15 GBPC25 GBPC35 I2 t 160 375 375 660 A 2s VISO 2500 V TJ, TSTG - 55 to + 150 C RMS isolation voltage from case to leads Operating junction storage temperature range Document Number: 88612 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 GBPC12, GBPC15, GBPC25 & GBPC35 Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) TEST SYMBOL CONDITIONS PARAMETER GBPC12, 15, 25, 35 005 01 02 04 06 08 10 UNIT IF = 6.0 A IF = 7.5 A IF = 12.5 A IF = 17.5 A VF 1.1 V Maximum reverse DC current at rated DC blocking voltage per diode TA = 25 C TA = 125 C IR 5.0 500 A Typical junction capacitance per diode 4 V, 1 MHz CJ 300 pF Maximum instantaneous forward drop per diode GBPC12 GBPC15 GBPC25 GBPC35 THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL GBPC12-25 GBPC35 Typical thermal resistance (1) GBPC12, 15, 25, 35 005 01 02 04 06 08 10 1.9 1.4 RJC UNIT C/W Notes: (1) With heatsink (2) Bolt down on heatsink with silicone thermal compound between bridge and mounting surface for maximum heat transfer with #10 screw ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE GBPC1206-E4/51 15.79 51 100 Paper box GBPC1506-E4/51 15.79 51 100 Paper box GBPC2506-E4/51 15.79 51 100 Paper box GBPC3506-E4/51 15.79 51 100 Paper box GBPC1206W-E4/51 13.8 51 100 Paper box GBPC1506W-E4/51 13.8 51 100 Paper box GBPC2506W-E4/51 13.8 51 100 Paper box GBPC3506W-E4/51 13.8 51 100 Paper box www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88612 Revision: 15-Apr-08 GBPC12, GBPC15, GBPC25 & GBPC35 Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 1000 Bridges Mounted on 9.5 x 3.5 x 4.6" (22.9 x 8.9 x 11.7 cm) AL, Finned Plate 35 30 Peak Forward Surge Current (A) Average Forward Current (A) 40 5 x 6 x 4.9" AL, Finned Plate 25 20 5 x 4 x 3" AL, Finned Plate 15 6 x 2.2 x 2.2" AL, Finned Plate 10 60 Hz Resistive or Inductive Load 5 100 GBPC12 GBPC15 GBPC25 10 25 0 50 75 100 125 150 175 200 10 1 100 Case Temperature (C) Number of Cycles at 60 Hz Figure 1. Maximum Output Rectified Current Figure 4. Maximum Non-Repetitive Peak Forward Surge Current Per Diode 100 GBPC35 RthSA = 0.5 C/W 35 30 60 Hz Resistive or Inductive Load Instantaneous Forward Current (A) 40 Average Forward Current (A) GBPC35 1.0 Cycle 0 GBPC25 RthSA = 0.5 C/W 25 20 GBPC15 RthSA = 1.0 C/W 15 10 GBPC12 RthSA = 1.0 C/W 5 10 0 20 30 40 50 60 70 80 90 TA = 150 C TA = 125 C 10 TA = 100 C TA = 25 C 1 0.1 0.4 0 100 0.5 0.6 0.8 0.7 0.9 1.0 1.1 Ambient Temperature (C) Instantaneous Forward Voltage (V) Figure 2. Maximum Output Rectified Current Figure 5. Typical Instantaneous Forward Characteristics Per Diode 1000 80 70 Instantaneous Reverse Leakage Current (A) Average Power Dissipation of Bridge (W) TJ = TJ Max. 0.5 ms Single Sine-Wave Capacitive Load 60 TJ = TJ Max. 50 40 Resistive or Inductive Load 30 20 10 TA = 150 C TA = 125 C 100 TA = 100 C 10 1 TA = 25 C 0.1 0 0 10 20 30 40 0 10 20 30 40 50 60 70 80 90 100 Average Output Current (A) Percent of Rated Peak Reverse Voltage (%) Figure 3. Maximum Power Dissipation Figure 6. Typical Reverse Leakage Characteristics Per Diode Document Number: 88612 Revision: 15-Apr-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 GBPC12, GBPC15, GBPC25 & GBPC35 Vishay General Semiconductor 1000 Transient Thermal Impedance (C/W) Junction Capacitance (pF) 1000 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 100 10 100 10 1 0.01 10 1 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p 100 1 0.1 10 100 Reverse Voltage (V) t - Heating Time (s) Figure 7. Typical Junction Capacitance Per Diode Figure 8. Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) GBPC-W Hole for #10 Screw 0.220 (5.59) DIA. 0.200 (5.08) 1.135 (28.8) 1.115 (28.3) 0.732 (18.6) 0.692 (17.6) 1.135 (28.8) 1.115 (28.3) 0.042 (1.07) 0.038 (0.97) DIA. www.vishay.com 4 0.24 (6.0) 0.18 (4.6) 0.732 (18.6) 0.692 (17.6) 0.24 (6.0) 0.18 (4.6) 0.310 (7.62) 0.290 (7.36) GBPC 0.470 (11.9) 0.430 (10.9) 0.50 (12.7) 0.44 (11.7) Hole for #10 Screw 0.220 (5.59) DIA. 0.200 (5.08) 0.672 (17.1) 0.632 (16.1) AC 0.672 (17.1) 0.632 (16.1) 1.135 (28.8) 1.115 (28.3) 0.582 (14.8) 0.542 (13.8) 0.034 (0.86) 0.030 (0.76) 0.732 (18.6) 0.692 (17.6) 0.094 (2.4) DIA. 1.25 (31.8) MIN. 1.135 (28.8) 1.115 (28.3) 0.034 (0.86) 0.030 (0.76) 0.25 (6.35) 0.310 (7.62) 0.290 (7.36) For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com 0.840 (21.3) 0.740 (18.8) Document Number: 88612 Revision: 15-Apr-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1