Note:
61
Note: Rated Continuous Working Voltage (RCWV) = Power Rating x Resistance Value
High Power Type
Ultra Miniature Style [ PNP Series ]
ELECTRICAL CHARACTERISTICS
STYLE PNP100 PNP200 PNP300 PNP400
Power Rating at 70°C 1W 2W 3W 4W
Dielectric Withstanding Voltage 300V
Resistance Range (±1%) 0.22 Ω - 130 Ω0.1 Ω - 820 Ω0.1 Ω - 2.2K Ω0.1 Ω - 2.8K Ω
Resistance Range (±5%) 0.1 Ω - 130 Ω0.068 Ω - 820 Ω0.025 Ω - 2.2K Ω0.03 Ω - 2.8K Ω
Operating Temp. Range -40°C to +200°C
Temperature Coefcient ±300ppm/°C
Note: Special value is available on request
ENVIRONMENTAL CHARACTERISTICS
PERFORMANCE TEST TEST METHOD APPRAISE
Short Time Overload IEC 60115-1 4.13 10 times rated power for 5 Sec. ±2.0%+0.05 Ω
Voltage Proof IEC 60115-1 4.7 in V-block for 60 Sec., test voltage by type By type
Temperature Coefcient IEC 60115-1 4.8 -55°C to +155°C By type
Insulation Resistance IEC 60115-1 4.6 in V-block for 60 Sec. >100M Ω
Solderability IEC 60115-1 4.17 235±5°C for 3±0.5 Sec. 95% Min. coverage
Solvent Resistance of Marking IEC 60115-1 4.30 IPA for 5±0.5 Min. with ultrasonic No deterioration of
coatings and markings
Robustness of Terminations IEC 60115-1 4.16 Direct load for 10 Sec. in the direction of the terminal leads ≥2.5kg (24.5N)
Damp Heat Steady State IEC 60115-1 4.24 40±2°C, 90-95% RH for 56 days, loaded with 0.1 times RCWV ±5.0%+0.05 Ω
Endurance at 70°C IEC 60115-1 4.25 70±2°C at RCWV for 1,000 Hr. (1.5 Hr. on, 0.5 Hr. off) ±5.0%+0.05 Ω
Temperature Cycling IEC 60115-1 4.19 -55°C Room Temp. +155°C Room Temp. (5 cycles) ±1.0%+0.05 Ω
Resistance to Soldering Heat IEC 60115-1 4.18 260±3°C for 10±1 Sec., immersed to a point 3±0.5mm from the body ±1.0%+0.05 Ω
Accidental Overload Test IEC 60115-1 4.26 4 times RCWV for 1 Min. No evidence of aming
or arcing