TOSHIBA TC4584BP/BF/BFN TOSHIBA CMOS DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TC4584BP, TC4584BF, TC4584BFN TC4584B HEX SCHMITT TRIGGER (Note) The JEDEC SOP (FN) is not available in Japan. The TC4584B is the 6-circuit inverter having the Schmitt trigger function at the input terminal. That is, since the circuit threshold level voltages at the leading and trailing edges of input waveform are different (Vp,Vy), the TC4584B can be used in the broad range application including line receiver, waveform shaping circuit, astable multivibrator, monostable multivibrator, etc. In addition to ordinary inverter. Since the pins are compatible with the TC4069UB, the substitution is also possible. MAXIMUM RATINGS P (DIP14-P-300-2.54) Weight : 0.96g (Typ.) 4 Nye 1 FN (SOL14-P-150-1.27) Weight : 0.12g (Typ.) F (SOP14-P-300-1.27) Weight : 0.18g (Typ.) VIN _|t>o Vout HYSTERESIS VOLTAGE VH=Vp- VN Vppb ' VIN VP VN Vout Vss5 Vu r =Vpp Vout ~Vsg 0 Vn Vp Vin * INPUT-OUTPUT * TRANSFER VOLTAGE WAVEFORM CHARACTERISTICS CHARACTERISTIC SYMBOL RATING UNIT PIN ASSIGNMENT DC Supply Voltage Vop Vs5 0.5~Vs55 + 20 Vv J Input Voltage Vin Vsg 0.5~Vpp + 0.5 V M1 14 Vp Output Voltage Vout Vss 0.5~Vpp + 0.5 V 01 LY 13 16 DC Input Current lin +10 mA Power Dissipation Pp 300 (DIP) / 180 (SOIC) | mw 2 30 []i2 06 Operating Temperature ane o2 aL Pia 15 Range Topr 40~85 Cc Storage Temperature 3 sY 10 05 u ~ Range Tstg ~65~150 C 03 LY yp 4 INPUT / OUTPUT VOLTAGE CHARACTERISTIC Vss 7 Ls 04 (TOP VIEW) LOGIC DIAGRAM IN Fido Po lo OUT 980910EBA2 @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. 1999-08-20 1/5 TOSHIBA TC4584BP/BF/BFN RECOMMENDED OPERATING CONDITIONS (Vss = OV) CHARACTERISTIC SYMBOL TEST CONDITION MIN. TYP. MAX. UNITS DC Supply Voltage Vop 3 18 V Input Voltage Vin 0 _ Vop Vv STATIC ELECTRICAL CHARACTERISTICS (Vs5 = 0V) 40C 25C 85C CHARACTERISTIC |symBoL| TEST CONDITION [Vop UNIT (v)| MIN. | MAX. | MIN. | TYP. | MAX. ] MIN. | MAX. 5) 495| | 495[ 500] | 495] igh Level ace Vou [our| <1 10/ 9.95] | 995|1000; | 995] P g IN= ssy VDp 15| 14.95 | | 14.95 | 15.00 | |1495| - | 5) | 005 | | 000] 005 | | 0.05 Ow reve tage Vo [our S148 10) | 005] | 000] 005} | 005 p 9 IN = 'ss1 DD 15] | 0.05 | | 000] 0.05} | 0.05 Vou= 4.6V 5]-0.61| |[-o51/-10 | |-o42/] Vou= 2.5V 5)/-2.50] |-2.10/-40 | |-1.70] Output High Current} loy | VoH= 9.5V 10} - 1.50 _ - 1.30 | -2.2 _ - 1.10 _ Voy = 13.5V 15|-4.00] |-3.40/-90 | |-280] Vin = Vss mA Vo. =0.4V 5) 067 | | o5s1l 15 | | oa2] Vo. =0.5V 10/ 1.50} | 130/38 | | 140] Output Low Current | lor |yo a 75v 15| 400| | 340/150 | | 290] Vin = Vop Positive Triager Voyr = 0.5V 5] 2.05 | 3.75] 2.15|/ 3.0 | 3.75 | 2.15 | 3.85 Threshold Coita e Vp |Voyr = 1.0V 10] 4.80 | 7.60] 4.90 | 6.4 | 7.60 | 4.90 | 7.70 g Vour = 1.5V 15| 7.80 | 11.60] 7.90 | 9.9 |11.60 | 7.90 |11.70 Negative Triager Vout = 4.5V 5] 1.25 | 2.95] 1.25/23 | 285] 1.15] 2.85 Threshold Vols Vy |Vour= 9.0V 10/ 2.40] 5.20] 2.40] 38 | 5.10] 2.30] 5.10] v g Vour = 13.5V 15| 3.40 | 7.20] 3.40| 5.2 | 7.10] 3.30] 7.10 5] 0.10 | 1.25] 0.25 | 0.65 | 1.25 | 0.25 | 1.40 Hysteresis Voltage Va 10! 1.80 | 3.50] 1.90] 2.60 | 3.50] 1.90] 3.60 15| 3.70 | 5.60] 3.80 | 4.70 | 5.60 | 3.80] 5.70 "H"Level} iy | Viq=18V 18} 01] 10") 0.1; 1.0 Input pA Current Ji" tevel| [Vi =0V 18) | -o1] - |-10-5| -01] - | -1.0 Quiescent Suppl 5) 1 Joo; 1 [75 Current Pply loo |Vin=Vsse Voo* | 10) 2 |0.002| 2 }15.0 | vA u 15] 4 |o0004] 4 |30.0 * All valid input combinations. 980910EBA2 @ The products described in this document are subject to the foreign exchange and foreign trade laws. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 1999-08-20 2/5 TOSHIBA TC4584BP/BF/BFN DYNAMIC ELECTRICAL CHARACTERISTICS (Ta = 25C, Vss = 0V, C, = 50pF) CHARACTERISTIC SYMBOL| TEST CONDITION VontV) MIN. TYP. MAX. UNIT Output Transition Time 5 7 80 200 (Low to High) thu 10 ~~ 30 100 g 15 - 40 80 Output Transition Time > 80 200 (High to Low) tr 10 _ 30 100 ns g 15 40 80 t 5 _ 170 340 Propagation Delay Time .. 10 80 160 pH 15 60 120 Input Capacitance Cin 5 7.5 pF CIRCUIT AND WAVEFORM FOR MEASUREMENT OF DYNAMIC CHARACTERISTICS CIRCUIT WAVEFORM 20ns 20ns Vv 90% pD INPUT 50% * 10% INPUT OUTPUT toi P.G. - = 90% 7 CL = 50pF OUTPUT 50% 1O% tTHL tTLH 1999-08-20 3/5 TOSHIBA TC4584BP/BF/BFN DIP 14PIN OUTLINE DRAWING (DIP14-P-300-2.54) Unit in mm 14 3 PA a Soo 9X 49.2540.2 | lesasgcara S025 Weight : 0.969 (Typ.) Unit in mm SOP 14PIN (200mil BODY) OUTLINE DRAWING (SOP14-P-300-1.27) 14 8 HHHHHHE 5.30.2 7.820.3 7.62 (300mil) [ E HHH ' 1 7 1.347TYP 0.4320.1 (10.25 10.8MAX 10.3+0.2 Nx = <8 Seo Al 2] ef e <8 s F701 a s 0.8+0.2 Weight : 0.18g (Typ.) 1999-08-20 4/5 TOSHIBA TC4584BP/BF/BFN SOP 14PIN (150mil BODY) OUTLINE DRAWING (SOL14-P-150 -1.27) Unit in mm (Note) This package is not available in Japan. 14 8 HHHEHEH 3.9+0.1 6.040.2 ZHEEEER 1 7 O.515TYP 0.42+0.07 O35 8.65+40.1 nN S Te) ihn! tC 45 g e 710.1] S Weight : 0.12g (Typ.) 1999-08-20 5/5