MXO45 & MXO45HS HCMOS/TTL Clock Oscillator FEATURES * * * * * * * * * * Standard 14 Pin or 8 Pin DIP Packages HCMOS/TTL Compatible Output Fundamental and 3rd Overtone Crystal Designs Frequency Range 1 - 200 MHz Frequency Stability 50 ppm Standard Operating Voltage +5.0Vdc Operating Temperature to -40C to +85C Output Enable Standard Plastic Tray Packaging RoHS/Green Compliant (6/6) APPLICATIONS Applications for MXO45 and MXO45HS include microprocessors/DSP/FPGA, networking equipment, broadband access, storage area networks, computers and peripherals, test and measurement, Ethernet/Gigabit Ethernet. ORDERING INFORMATION MXO - - M SUPPLY VOLTAGE FREQUENCY IN MHz 45 = 14 Pin DIP/STD Output 45T = 14 Pin DIP/Tristate Output 45HS = 8 Pin DIP/STD Output 45HST = 8 Pin DIP/Tristate Output M - indicates MHz and decimal point. OPERATING TEMPERATURE RANGE C = -20C to +70C [standard] I = -40C to +85C 1 FREQUENCY STABILITY 6 5 3 2 = = = = 2 20 ppm 1 25 ppm 50 ppm [standard] 100 ppm 1] 6I Stability/Temperature combination is not available. Check availability for 6C combination. 2] Frequency is recorded with only leading significant digits before the `M' and 4 - 6 significant digits after the `M' (including zeros). [Ex. XMXXXXXX (3M579545), XXMXXXXX (14M31818), XXXMXXXX (125M0000)] Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. PACKAGING INFORMATION [reference] Product is packaged in plastic trays. Typical packaging format is as follows: 50 pcs./Plastic Tray. Tray size is approximately 180 x 136 x 18mm [LxWxH]. 2 Trays per Anti-Static Bag [100 pcs.] or 10 Trays per Anti-Static Bag [500 pcs.]. Bag height for 10 Trays is approximately 175mm. 1 anti-static bag per cardboard carton. Master-pack multiple cardboard cartons in a larger carton. 8 cardboard cartons [10 trays per carton] is approximately 460 x 380 x 400mm [LxWxH]. Document No. 008-0258-0 Page 1- 3 www.ctscorp.com Rev. F MXO45 & MXO45HS Metal DIP Low Cost HCMOS/TTL Clock Oscillator ELECTRICAL CHARACTERISTICS PARAMETER Maximum Supply Voltage Storage Temperature Frequency Range Frequency Stability Aging Operating Temperature Commercial Industrial Supply Voltage Supply Current SYMBOL VCC CONDITIONS - MIN -0.5 TYP - MAX +7.0 TSTG - -40 - +100 C fO - 1.0 - 200 MHz f/fO f See Note 1 and Ordering Information - - 20,25,50 or 100 ppm First year - 3 5 ppm C 5.0 +70 +85 5.5 - 10 20 30 40 55 26 40 60 70 80 - - 50 30 15 10 90%VCC 2.4 - - - - 10%VCC 0.4 - - -16 - - 16 45 - 55 - 8 5 2.5 - 10 8 5 2 10 ms V TA VCC UNIT V - -20 -40 4.5 10% Frequency Range +25 V Tested load condition noted for typical values. ICC 1.0MHz to 20MHz 20.001MHz to 40MHz 40.001MHz to 80MHz 80.001MHz to 125MHz 125.001MHz to 200MHz CL=50pF CL=30pF CL=30pF CL=15pF CL=15pF mA Output Load ELECTRICAL PARAMETERS CMOS CL TTL Output Voltage Levels Logic '1' Level Logic '0' Level VOH VOL 1.0MHz to 50MHz 50.001MHz to 80MHz 80.001MHz to 200MHz 1.0MHz to 200MHz CMOS Load 10 TTL LOAD CMOS TTL Load pF TTL V Output Current Logic '1' Level IOH VOH = 3.9V Logic '0' Level IOL VOL = 0.4V Output Duty Cycle Rise and Fall Time SYM VCC = 4.5V @ 50% Level @ 10% - 90% Levels mA % Tested load condition noted for typical values. TS 1.0MHz to 20MHz 20.001MHz to 80MHz 80.001MHz to 125MHz 125.001MHz to 200MHz Application of VCC TR, TF Start Up Time VCC = 4.5V CL=50pF CL=30pF CL=15pF CL=15pF ns Enable Function Enable Input Voltage VIH Pin 1 Logic '1', Output Enabled 2.0 - - Disable Input Voltage VIL Pin 1 Logic '0', Output Disabled - - 0.8 Enable Time TPLZ Pin 1 Logic '1' - - 200 ns Standby Current IST Pin 1 Logic '0', Output Disabled - - 10 A Period Jitter, Pk-Pk - - - - 50 Period Jitter, RMS - - - - Bandwidth 12kHz - 20MHz Phase Jitter, RMS Notes: 1. Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and 1st year aging. Document No. 008-0258-0 Page 2 - 3 5 ps 1 Rev. F MXO45 & MXO45HS Metal DIP Low Cost HCMOS/TTL Clock Oscillator ELECTRICAL CHARACTERISTICS LVCMOS OUTPUT WAVEFORM TEST CIRCUIT, CMOS LOAD ENABLE TRUTH TABLE D.U.T. PIN ASSIGNMENTS PIN SYMBOL PIN 1 Logic `1' Open Logic `0' PIN 5 or PIN 8 Output Output High Imp. 1 DESCRIPTION EOH Enable Input or No Connect 7 or 4 GND Circuit & Package Ground 8 or 5 Output 14 or 8 VCC RF Output Supply Voltage MECHANICAL SPECIFICATIONS MARKING INFORMATION 1. Model Name: DIP-14 - MXO45 or MXO45T. DIP-8 - MXO45HS or MXO45HST. 2. XXXMXXXXXX - Frequency is marked with only leading significant digits before the `M' and 4 - 6 digits after the `M' (including zeros). PACKAGE DRAWING DIP-14 Ex. XMXXXXXX [3M579545] XXMXXXXX [14M31818] XXXMXXXX [125M0000] 3. ST - Frequency stability/temperature code. [Refer to Ordering Information.] 4. YYWW - Date code, YY - year, WW - week. 5. ** - Manufacturing Site Code. MXO45 XXXMXXXXXX CTS ST YYWW ** NOTES 1. Lead finish [e1], SnAgCu. 2. Reflow conditions per JEDEC J-STD-020, 260C maximum. 3. Moisture Sensitivity Level 1, per JEDEC J-STD020. DIP-8 MXO45HS XXXMXXXXXX CTS ST YYWW ** Document No. 008-0258-0 Page 3 - 3 Rev. F