Digital CATV front-end unit For digital STB (Double conversion type) Model No. VH1B1UF3006 Features Low phase noise characteristic: -90 dBc/Hz (10 KHz) Phase noise characteristic improved by using new MIX+OSC+PLL IC Compact, thin design Smallest size in the industry (36 x 70 x 11.5 mm) enables installation in PCI cards Low power consumption Low power consumption of 1.3 W 13.0 Specifications 0.9 10 dB 1,062 MHz 36.0 30.0 40.85 54 to 860 MHz Double conversion PLL synthesizer -90 dBc/Hz (10 KHz) 1.3 W 36 x 70 x 11.5 mm 2.5 4.1 3.5 6.1 5.9 0.6 14.2 3.5 Input frequency: Circuit system: Channel selection system: Phase noise characteristic: Noise figure (NF) 1st IF frequency Power consumption Outline dimensions 9.2 For cable modem (Single conversion type) 0.6 0.6 48.8 0.6 68.8 Model No. VH2A7UF2006 Features Low phase noise characteristic: -88dBc/Hz (10 KHz) Phase noise characteristic improved by using new MIX+OSC+PLL IC Compact, thin, low power consumption Smallest size in the industry (32 x 70 x 11.5 mm) enables installation in PCI cards Low power consumption: 0.6 W Compatible with model with built-in DC/DC converter (VH2A7UF2006) Line-up includes model with built-in DC/DC converter for tuning voltage (30V), realizing operation with a 5 V single power supply 18.5 1.7 7.85 32.0 30.8 88 to 860 MHz Single conversion PLL synthesizer -88 dBc/Hz (10 kHz) 10 dB Available (option) 0.6 W 32 x 70 x 11.5 mm 12.25 Input frequency: Circuit system: Channel selection system: Phase noise characteristic: Noise figure (NF) Built-in DC/DC converter: Power consumption Outline dimensions 11.5 Specifications 6.0 11.5 70.0 In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Specifications are subject to change without notice for improvement.