Features
Low phase noise characteristic: -90 dBc/Hz (10 KHz)
Phase noise characteristic improved by using new MIX+OSC+PLL IC
Compact, thin design
Smallest size in the industry (36 x 70 x 11.5 mm) enables installation in PCI cards
Low power consumption
Low power consumption of 1.3 W
Digital CATV front-end unit
Specifications
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in using any
SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using
any SHARP device. Specifications are subject to change without notice for improvement.
For digital STB (Double conversion type)
Model No. VH1B1UF3006
Input frequency: 54 to 860 MHz
Circuit system: Double conversion
Channel selection system: PLL synthesizer
Phase noise characteristic: -90 dBc/Hz (10 KHz)
Noise figure (NF) 10 dB
1st IF frequency 1,062 MHz
Power consumption 1.3 W
Outline dimensions 36 x 70 x 11.5 mm
Features
Low phase noise characteristic: -88dBc/Hz (10 KHz)
Phase noise characteristic improved by using new MIX+OSC+PLL IC
Compact, thin, low power consumption
Smallest size in the industry (32 x 70 x 11.5 mm) enables installation in PCI cards
Low power consumption: 0.6 W
Compatible with model with built-in DC/DC converter (VH2A7UF2006)
Line-up includes model with built-in DC/DC converter for tuning voltage (30V), realizing operation with a 5 V
single power supply
Specifications
For cable modem (Single conversion type)
Model No. VH2A7UF2006
Input frequency: 88 to 860 MHz
Circuit system: Single conversion
Channel selection system: PLL synthesizer
Phase noise characteristic: -88 dBc/Hz (10 kHz)
Noise figure (NF) 10 dB
Built-in DC/DC converter: Available (option)
Power consumption 0.6 W
Outline dimensions 32 x 70 x 11.5 mm
13.0
9.2 0.9
0.6 0.6 0.6 0.6
14.2 48.8 68.8
36.0
6.1
4.1
2.5
5.9
3.5
30.0
40.85
3.5
18.5
7.85
32.0
30.8
12.25
11.5
1.7
6.0 11.5
70.0
