www.piher.net
Self extinguishable plastic UL 94V-0 (PS-10).
Carbon resistive element.
Specifically designed for leadfree reflow soldering
processes (excellent performance).
Full traceability.
Moisture sensitivity level 1 (PS-10).
Embossed tape according to IEC 60286-3:2007.
IP54 protection according to IEC 60529.
Also upon request:
Wiper positioned at initial, 50% or fully clockwise.
* Others upon request Equivalent Noise Resistance:
Operating temperature: PSX-10: –25°C + 70°C
PS-10: –40°C + 85°C
Tolerance*: ± 30%
MECHANICAL SPECIFICATIONS
Life*: Up to 10K cycles
Mechanical rotation angle: 235° ± 5°
Electrical rotation angle: 220° ± 20°
Residual resistance:
Long life model for low cost control potentiometer
applications.
NOTES
(6)
Non flammable plastic material for housing and rotor.
(5)
(2) V50: without locating pins. V60: with locating pins
Others upon request.
(3)
Standard = 1000 cycles. Long life = 10K cycles. Others upon request.
(4)
(1) Rotor “R” not available for PSX-10
PS-10 & PSX-10
10mm
potentiometer
SMD
Stop torque: > 5 Ncm. ( >7 in-oz)
Torque: 0.4 to 2 Ncm.
(0.6 to 2.7 in-oz)
Value*: 1k to 1M
Nominal Power: 0.15W @ 50°C (122°F)
Taper*: Linear
Low torque versions.
Mechanical detents.
Locating pins for accurate PCB positioning.
Shafts and knobs.
1
ELECTRICAL SPECIFICATIONS
HOW TO ORDER
MAIN FEATURES
Detents
PAM
P1I
P1F
P1
P16
See detent
configurations
B = Bulk
- - - -
Wiper position
PM = 50%
PF = Final
OPTIONAL EXTRAS
Life
E= Long life
(See note 4)
Code
V50
V50
V60
L
Rotors
G
L
M
K
R
PSX10
Series
PSX10
PS10
(See note 2)
102 A
Taper
A = Lin.
3030
Tolerance
3030 = ± 30%
(See note 3)
Value
- -
102 = 1K
105 = 1M
(See note 1)
Packaging
Torque
– = Standard
L = Low torque
(See note 6)
(See note 5)
I= non flammable
-
Flammability
+ DRAWING NUMBER
(Max. 16 characters)
PS(X)-10LV50
This way of ordering should be used for options which are not included
in the "How to order" standard and optional extras.
R
= thru hole
www.piher.net
K = Cross slot
thru hole
0.7
2.2
2.2
1.6
2
G
= Hexagonal
thru hole
2.05
L = Screwdriver
thru hole
2.1
0.8
Packing Reel
.................................................................
Life 1000 cycles
.........................................................................
Torque Standard
.......................................................................
Wiper position Initial
......................................................
Housing colour
......................................................
Dark grey
Dark greyRotor colour
.........................................................
NoneDetents
..................................................................
PSX-10 PS-10
...................................................................
Reel
1000 cycles
Standard
Initial
Black
Black
None
2
.05
M
= Hexagonal
thru hole
2
5
2
2
2.5 2.5
5.7
5.75
10.9
2.05
5.15
10.3
2.5 2.5
9.4
2.5
2
2
2.5 2.5
5.7
5.75
10.9
2
5
2.05
10.3
5.15
9.4
2.5
9.4
2.5
1.2 (x2)
2.5
1
0.85
DIMENSIONS (V50 version)
DIMENSIONS (V60 version - with centering pins)
ROTORS
Note: wipers are shown positioned at 50%
2
Download the STEP file here:
https://piher.net/piher/?p=909
STANDARD OPTIONS
HOW TO ORDER CUSTOM DRAWING
PSX-10 TESTS
VARIATIONS
ELECTRICAL LIFE
MECHANICAL LIFE (CYCLES)*
TEMPERATURE COEFFICIENT
THERMAL CYCLING
DAMP HEAT
VIBRATION (for each plane X,Y,Z)
* Tests at room temperature. Other life cycles upon request.
NOTE: Out of range values may not comply these results. Please confirm with the factory all the information before designing in.
PS-10 TESTS
VARIATIONS
ELECTRICAL LIFE
MECHANICAL LIFE (CYCLES)*
TEMPERATURE COEFFICIENT
THERMAL CYCLING
DAMP HEAT
VIBRATION (for each plane X,Y,Z)
* Tests at room temperature. Other life cycles upon request.
NOTE: Out of range values may not comply these results. Please confirm with the factory all the information before designing in.
PSX-10 RECOMMENDED REFLOW PROFILE
(*) Melting point temp. depends on solder properties
Between 60-90 s
<40 s
Max. temp 240ºC
200ºC (*)
Preheat temp. 150ºC (*)
Room temp.
Heat used to
melt solder
paste
1.000 h. @ 50°C; 0.15 W
1000 @ 10 CPM ...15 CPM
–25°C; +70°C
16 h. @ 85°C; 2h. @ –25°C
500 h. @ 40°C @ 95% HR
2 h. @ 10 Hz. ... 55 Hz.
±10%
±10 %
±1000 ppm
±5 %
±15 %
±3 %
(*) Melting point temp. depends
on solder properties
Between 60-120 s
30-45 s
Max. temp 250ºCs
200ºC (*)
Preheat temp. 150ºC (*)
Room temp.
Heat used to
melt solder
paste
1.000 h. @ 50°C; 0.15 W
500 @ 10 CPM ...15 CPM
–40°C; +85°C
–25°C; +70°C
16 h. @ 90°C; 2h. @ –40°C
500 h. @ 40°C @ 95% HR
2 h. @ 10 Hz. ... 55 Hz.
±10%
±10 %
±1500 ppm
±1000 ppm
±5 %
±15 %
±3 %
The recommended reflow profile is provided as a guideline. Optimal profile may differ due to oven type, assembly layout or other design or process variables.
Customers should verify actual device performance in their specific application and reflow process. Please contact Piher if you require additional support.
The recommended reflow profile is provided as a guideline. Optimal profile may differ due to oven type, assembly layout or other design or process variables.
Customers should verify actual device performance in their specific application and reflow process. Please contact Piher if you require additional support.
INITIA
LFINA
L
50% +20
º
Positioning (Std. Position = CCW)
P.M.
P.F.
www.piher.net 3
PS-10 RECOMMENDED REFLOW PROFILE
POSITIONING
PACKAGING
P08
P09 P10
P07
P06
P05
P04
P02P1FP1I
P03
Different output voltage values can be matched at each
detent position (under request).
NOTES FOR DETENTED VERSIONS:
Some configurations may have a longer leadtime.
Detent torque can vary from 1.2 to 2.5 times the standard
potentiometer torque.
Standard mechanical life is 500 cycles.
Long life versions are available under request and have the
following characteristics at Tª:
- Potentiometers with 1 to 3 detents: up to 10K cycles
- Potentiometers with 4 and more detents: up to 5K cycles
DETENT CONFIGURATIONS
EXAMPLES
(3)
(4)
(1)
(5)
(2)
BULK: 500pcs / per Box (80 x 85 x 185 mm.)
EMBOSSED TAPE: 500pcs / Reel
www.piher.net 4
PAM
A
A
330
Label
29
Direction of unreeling
16
24
4
1.75
11.5
8.2
1.5
Relative detent positions
along the total mechanical
travel.
Unless otherwise
specified the detents
are evenly spaced
(using the end points
as reference)
This innovative PT´s with detents
family has been specifically developed
to allow the integration of otherwise
large and expensive external
mechanisms into the body of the
majority of the 6, 10 & 15 mm.
potentiometer series thus allowing a
high range of configurations: special
tapers, tolerances, linearity, cut track,
etc.
This detent design not only adds a
"click" sensation of position, but also
offers enormous savings in both cost
and space for any given application.
Detent number and positions can be
made or fitted to the customer needs
or preferences.
Pb
S
e
e
o
u
r
R
E
A
C
H
&
R
o
H
S
c
e
r
t
i
f
i
c
a
t
e
s
a
w
w
w
.
p
i
h
e
r
.
n
e
t
RECOMMENDED CONNECTIONS
Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or other countries. Each recipient of this document is
responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control
restrictions that apply to this information, please contact the sender immediately. For any Piher Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from the
United States are in accordance with the Export Administration Regulations. Diversion contrary to US law is prohibited.
Piher potentiometer’s recommended
connection circuit for a position sensor or
control application.
(voltage divider circuit electronic design).
All Piher products can be adapted to meet customer´s requirements.
Please always use the latest updated datasheets published at our website www.piher.net.
RAD
RL
RL 100 x R
VCC
C
Noise filter.
Ground.
E
A
S
www.piher.net 5
Disclaimer
The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information.
Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Piher”), disclaim
any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described
herein.
Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to
the maximum extent permitted by law . The product specifications do not exp and or otherwise modify Piher’s terms and conditions of sale, including
but not limited to the warranty expressed therein, which apply to these products.
No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated.
Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully
indemnify Piher for any damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms
and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
v080618