10mm SMD potentiometer PS-10 & PSX-10 MAIN FEATURES - Specifically designed for leadfree reflow soldering processes (excellent performance). - Carbon resistive element. - IP54 protection according to IEC 60529. - Full traceability. - Moisture sensitivity level 1 (PS-10). - Embossed tape according to IEC 60286-3:2007. - Wiper positioned at initial, 50% or fully clockwise. - Also upon request: Self extinguishable plastic UL 94V-0 (PS-10). Long life model for low cost control potentiometer applications. Mechanical detents. Low torque versions. Locating pins for accurate PCB positioning. Shafts and knobs. MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS - Mechanical rotation angle: 235 5 - Value*: 1k - Electrical rotation angle: 220 20 - Tolerance*: 30% - Torque: 0.4 to 2 Ncm. (0.6 to 2.7 in-oz) - Stop torque: > 5 Ncm. ( >7 in-oz) - Life*: Up to 10K cycles to 1M - Taper*: Linear - Nominal Power: 0.15W @ 50C (122F) - Operating temperature: PSX-10: -25C + 70C PS-10: -40C + 85C - Residual resistance: - Equivalent Noise Resistance: * Others upon request HOW TO ORDER OPTIONAL EXTRAS PSX10 L V50 - 102 A 3030 - - - - - - Series Code Taper Life Detents Flammability Wiper position PSX10 PS10 V50 V60 A = Lin. E= Long life PAM P1I P1F P1 I= non flammable PM = 50% PF = Final (See note 4) (See note 2) Rotors Value G L M K R 102 = 1K P16 3030 = 30% (See note 3) See detent configurations 105 = 1M (1) Rotor "R" not available for PSX-10 (2) V50: without locating pins. V60: with locating pins (3) Others upon request. (4) Standard = 1000 cycles. Long life = 10K cycles. Others upon request. (5) Non flammable plastic material for housing and rotor. (6) www.piher.net B = Bulk (See note 5) Torque Tolerance (See note 1) NOTES Packaging 1 - = Standard L = Low torque (See note 6) HOW TO ORDER CUSTOM DRAWING STANDARD OPTIONS PS(X)-10LV50 + DRAWING NUMBER (Max. 16 characters) This way of ordering should be used for options which are not included in the "How to order" standard and optional extras. None Rotor colour ......................................................... Black Housing colour...................................................... Black Wiper position ...................................................... Initial Torque ....................................................................... Standard Packing ................................................................. ......................................................................... Life Reel 1000 cycles PS-10 ................................................................... PSX-10 Detents .................................................................. None Dark grey Dark grey Initial Standard Reel 1000 cycles ROTORS 2 2.2 2.05 1.6 2.1 2.2 5 0.7 2.0 0.8 L = Screwdriver K = Cross slot G = Hexagonal M = Hexagonal thru hole R = thru hole thru hole thru hole thru hole Note: wipers are shown positioned at 50% DIMENSIONS (V50 version) 2.5 5.7 10.3 2 2 9.4 5.15 5 10.9 5.75 2.0 5 2 2.5 2.5 2.5 2.5 DIMENSIONS (V60 version - with centering pins) 9.4 2.5 10.3 0.85 9.4 5 5.15 1 5.75 10.9 2.0 2 5.7 1.2 (x2) 5 2 2 2.5 2.5 2.5 Download the STEP file here: https://piher.net/piher/?p=909 www.piher.net 2 2.5 POSITIONING Positioning (Std. Position = CCW) P.M. 50% +20 P.F. INITIA L FINA L PSX-10 RECOMMENDED REFLOW PROFILE Heat used to melt solder paste Max. temp 240C 200C (*) <40 s Preheat temp. 150C (*) Between 60-90 s Room temp. (*) Melting point temp. depends on solder properties The recommended reflow profile is provided as a guideline. Optimal profile may differ due to oven type, assembly layout or other design or process variables. Customers should verify actual device performance in their specific application and reflow process. Please contact Piher if you require additional support. PSX-10 TESTS VARIATIONS ELECTRICAL LIFE 1.000 h. @ 50C; 0.15 W 10% MECHANICAL LIFE (CYCLES)* 1000 @ 10 CPM ...15 CPM 10 % TEMPERATURE COEFFICIENT -25C; +70C 1000 ppm THERMAL CYCLING 16 h. @ 85C; 2h. @ -25C 5 % DAMP HEAT 500 h. @ 40C @ 95% HR 15 % VIBRATION (for each plane X,Y,Z) 2 h. @ 10 Hz. ... 55 Hz. 3 % * Tests at room temperature. Other life cycles upon request. NOTE: Out of range values may not comply these results. Please confirm with the factory all the information before designing in. PS-10 RECOMMENDED REFLOW PROFILE Heat used to melt solder paste Max. temp 250Cs 200C (*) 30-45 s Preheat temp. 150C (*) (*) Melting point temp. depends on solder properties Between 60-120 s Room temp. The recommended reflow profile is provided as a guideline. Optimal profile may differ due to oven type, assembly layout or other design or process variables. Customers should verify actual device performance in their specific application and reflow process. Please contact Piher if you require additional support. PS-10 TESTS VARIATIONS ELECTRICAL LIFE 1.000 h. @ 50C; 0.15 W 10% MECHANICAL LIFE (CYCLES)* 500 @ 10 CPM ...15 CPM 10 % TEMPERATURE COEFFICIENT -40C; +85C 1500 ppm -25C; +70C 1000 ppm THERMAL CYCLING 16 h. @ 90C; 2h. @ -40C 5 % DAMP HEAT 500 h. @ 40C @ 95% HR 15 % VIBRATION (for each plane X,Y,Z) 2 h. @ 10 Hz. ... 55 Hz. 3 % * Tests at room temperature. Other life cycles upon request. NOTE: Out of range values may not comply these results. Please confirm with the factory all the information before designing in. www.piher.net 3 PACKAGING BULK: 500pcs / per Box (80 x 85 x 185 mm.) EMBOSSED TAPE: 500pcs / Reel 29 330 A A Label 16 8.2 1.75 4 5 24 11.5 1. Direction of unreeling DETENT CONFIGURATIONS EXAMPLES This innovative PTs with detents family has been specifically developed to allow the integration of otherwise large and expensive external mechanisms into the body of the majority of the 6, 10 & 15 mm. potentiometer series thus allowing a high range of configurations: special tapers, tolerances, linearity, cut track, etc. This detent design not only adds a "click" sensation of position, but also offers enormous savings in both cost and space for any given application. Detent number and positions can be made or fitted to the customer needs or preferences. PAM P1I P1F P02 P03 P04 P05 P06 P07 P08 P09 Relative detent positions along the total mechanical travel. Unless otherwise specified the detents are evenly spaced (using the end points as reference) P10 NOTES FOR DETENTED VERSIONS: (4) Detent torque can vary from 1.2 to 2.5 times the standard (1) Some configurations may have a longer leadtime. potentiometer torque. (2) Standard mechanical life is 500 cycles. (5) Different output voltage values can be matched at each detent position (under request). (3) Long life versions are available under request and have the following characteristics at T: - Potentiometers with 1 to 3 detents: up to 10K cycles - Potentiometers with 4 and more detents: up to 5K cycles www.piher.net 4 RECOMMENDED CONNECTIONS VCC E Piher potentiometer's recommended connection circuit for a position sensor or control application. (voltage divider circuit electronic design). S R A AD RL C Noise filter. Ground. RL 100 x R Disclaimer The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information. Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Piher"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein. Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Piher's terms and conditions of sale, including but not limited to the warranty expressed therein, which apply to these products. No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Piher for any damages arising or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or other countries. Each recipient of this document is responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from the United States are in accordance with the Export Administration Regulations. Diversion contrary to US law is prohibited. All Piher products can be adapted to meet customers requirements. Please always use the latest updated datasheets published at our website www.piher.net. H e Se t Pb ww.p iher.ne u r RE A C H S cer tificat aw eo Ro s & v080618 www.piher.net 5