OLED-100H016B-BPP5N00000 - VISHAY

OLED-100H016B

www.vishay.com Vishay

Revision: 13-Feb-14 1Document Number: 37709

For technical questions, contact: displays@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

100 x 16 Graphic OLED

FEATURES

• Type: Graphic

• Display format: 100 x 16 dots

• Built-in controller: OLED-0010

• Duty cycle: 1/16

• +5 V power supply, +3 V optional

• Interface: 6800, option 8080 and SPI

• Sunlight readable and polarizer optional

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

Note

•V

SS = 0 V, VDD = 3.0 V/5.0 V

MECHANICAL DATA

ITEM STANDARD VALUE UNIT

Module dimension 122.0 x 44.0 x 10.0 (max.)

Viewing area 99.0 x 24.0

Active area 95.94 x 17.86

Dot size 0.90 x 1.06

Dot pitch 0.96 x 1.12

Mounting hole 115.0 x 37.0

ABSOLUTE MAXIMUM RATINGS

ITEM SYMBOL STANDARD VALUE UNIT

MIN. MAX.

Supply voltage

for logic VDD to VSS -0.3 5.3 V

Input voltage VI-0.3 VDD

ELECTRICAL CHARACTERISTICS

ITEM SYMBOL CONDITION STANDARD VALUE UNIT

MIN. TYP. MAX.

Supply voltage for logic VDD to VSS - 3.0 5.0 5.3 V

Input high voltage VIH - 0.9 VDD -V

DD V

Input low voltage VIL - GND - 0.1 VDD V

Output high voltage VOH IOH = 0.5 mA 0.8 VDD -V

DD V

Output low voltage VOL IOL = 0.5 mA GND - 0.2 VDD V

Supply current IDD VDD = 5 V - 43 - mA

OPTIONS

EMITTING COLOR MOQ

YELLOW GREEN RED BLUE WHITE YELLOW GREEN RED BLUE WHITE

YYYY -NYYY -

OLED-100H016B

www.vishay.com Vishay

Revision: 13-Feb-14 2Document Number: 37709

For technical questions, contact: displays@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

INTERFACE PIN FUNCTION

PIN NO. SYMBOL FUNCTION

SS Ground

DD Supply voltage for logic

3 NC No connection

4 RS H: Data; L: Instruction code

5R/W

H: Read (MPU ← Module); L: Write (MPU → Module)

6EH → L enable signal

7 DB0 Data bit 0

8 DB1 Data bit 1

9 DB2 Data bit 2

10 DB3 Data bit 3

11 DB4 Data bit 4

12 DB5 Data bit 5

13 DB6 Data bit 6

14 DB7 Data bit 7

15 NC No connection

16 NC No connection

DIMENSIONS in millimeters

LED B/L

15 16

SCALE 10/1

DOT SIZE

10.0

13.58 95.94(AA)

11.5 99.0 (VA)

8.0

24.0 (VA)

2.9

34.2

P2.54*15=38.110.98

4-Ø3.5 PTH

2.0

122.0±0.5

44.0±0.5

4-Ø6.5 PAD

18-Ø1.0 PTH

4.7

10.0MAX

1.6

2.5

115.03.5

3.537.0

17.86(AA)

105.6

8.2

1.12

1.06

0.96

0.9

100x16 Dots

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.