2016 Microchip Technology Inc. DS20005624A-page 1
DSC61XX
Features
• Wide Frequency Range: 2 KHz to 100 MHz
• Ultra–Low Power Consumption: 3 mA/12 A
(Active/Standby)
• Ultra-Small Footprints
- 1.6 mm 1.2 mm
- 2.0 mm 1.6 mm
- 2.5 mm 2.0 mm
- 3.2 mm 2.5 mm
• Frequency Select Input Supports 2 Predefined
Frequencies
• High Stability: ±25, ±50 ppm
• Wide Temperature Range
- Industrial: –40°C to 85°C
- Ext. Commercial: –20° to 70°C
• Excellent Shock & Vibration Immunity
- Qualified to MIL-STD-883
• High Reliability
- 20x Better MTF Than Quartz Oscillators
• Supply Range of 1.71V to 3.63V
• Short Sample Lead Time: <2 weeks
• Lead Free & RoHS Compliant
Applications
• Low Power/portable Applications - IoT,
Embedded/smart Devices
• Consumer - Home Healthcare, Fitness Devices,
Home Automation
• Automotive - Rear View/surround View Cameras,
Infotainment System
• Industrial - Building/ Factory Automation,
Surveillance Camera
General Description
The DSC61xx family of MEMS oscillators combines the
industry leading low power consumption and
ultra-small packages with exceptional frequency
stability and jitter performance over temperature. The
single-output DSC61xx MEMS oscillators are excellent
choices for use as clock references in small,
battery-powered devices such as wearable and
Internet of Things (IoT) devices in which small size, low
power consumption, and long-term reliability are
paramount. They also meet the stringent mechanical
durability and reliability requirements within Automotive
Electronics Council standard Q100 (AEC-Q100), so
they are well suited for under-hood applications as well.
The DSC61xx family is available in ultra-small
1.6 mm x 1.2 mm and 2.0 mm x 1.6 mm packages.
Other package sizes include: 2.5 mm x 2.0 mm and
3.2 mm x 2.5 mm. These packages are “drop-in”
replacements for standard 4-pin CMOS quartz crystal
oscillators.
Package Types
DSC61XX
3.2x2.5
DFN
Top View
DSC61XX
2.5x2.0
LGA
Top View
DSC61XX
2.0x1.6
LGA
Top View
DSC61XX
1.6x1.2
LGA
Top View
12
34
12
3
4
12
43
12
34
Ultra-Small, Ultra-Low Power MEMS Oscillator
DSC61XX
DS20005624A-page 2 2016 Microchip Technology Inc.
Block Diagram
DSC6101/02/11/12/21/22/41/42/51/52/61/62
DSC6183 (kHz Output)
MEMS
RESONATOR
TEMP SENSOR
CONTROL &
COMPENSATION
PLL
VCO OUTPUT
DIVIDER
DRIVER
SUPPLY
REGULATION
P1
OUTPUT
P2
GND
P4
VDD
P3
DNC
MEMS
RESONATOR
TEMP SENSOR
CONTROL &
COMPENSATION
PLL
VCO OUTPUT
DIVIDER DRIVER
SUPPLY
REGULATION
PIN 1
OE/STBY/FS
PIN 2
GND
PIN 4
VDD
PIN 3
OUTPUT
DIGITAL
CONTROL
2016 Microchip Technology Inc. DS20005624A-page 3
DSC61XX
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings
Supply Voltage .......................................................................................................................................... –0.3V to +4.0V
Input Voltage, VIN ............................................................................................................................... –0.3V to VDD+0.3V
ESD Protection .......................................................................................................4000V HBM, 400V MM, 2000V CDM
DSC61XX ELECTRICAL CHARACTERISTICS
Electrical Characteristics: Unless otherwise indicated, VDD= 1.8V –5% to 3.3V +10%, TA= –40°C to 85°C.
Parameters Sym. Min. Typ. Max. Units Conditions
Supply Voltage, Note 1 VDD 1.71 — 3.63 V —
Active Supply Current IDD — 3.0 — mA FOUT = 27 MHz, VDD = 1.8V,
No Load
Standby Supply Current
Note 2 ISTBY
—12 — AVDD = 1.8/2.5V
—80 — V
DD = 3.3V
Frequency Stability Note 3 Δf——
±25
±50 ppm All temp ranges
Aging Δf—— ±5 ppm 1st year @25°C
— — ±1 Per year after first year
Startup Time tSU — — 1.3 ms From 90% VDD to valid clock
output, T = 25°C
Input Logic Levels Note 4
Input Logic High
Input Logic Low
VIH 0.7xVDD —— V
—
VIL — — 0.3xVDD V
Output Disable Time
Note 5 tDA — — 200+Period ns —
Output Enable Time
Note 6 tEN —— 1 s—
Enable Pull-up Resistor
Note 7 — — 300 — kIf configured
Output Logic Levels
Output Logic High
Output Logic Low
VOH 0.8xVDD — — V I = 6mA
VOL — — 0.2xVDD V I = –6mA
Note 1: Pin 4 VDD should be filtered with 0.1 uf capacitor.
2: Not including current through pull-up resistor on EN pin (if configured). Higher standby current seen at
>3.3V VDD.
3: Includes frequency variations due to initial tolerance, temp. and power supply voltage.
4: Input waveform must be monotonic with rise/fall time < 10 ms
5: Output Disable time takes up to 1 Period of the output waveform + 200 ns.
6: For parts configured with OE, not Standby.
7: Output is enabled if pad is floated or not connected.
DSC61XX
DS20005624A-page 4 2016 Microchip Technology Inc.
Output Transition Time
Rise Time/Fall Time
tRX/tFX
— 1 1.5 ns DSC61X2
High Drive,
20% to 80%
CL=15 pF
VDD = 1.8V
— 0.5 1.0 ns VDD = 2.5V/3.3V
tRY/tFY
— 1.2 2.0 ns DSC61X1
Std Drive,
20% to 80%
CL=10 pF
VDD = 1.8V
— 1.5 2.2 ns VDD = 2.5V/3.3V
Frequency f00.002 — 100 MHz Output on Pin 1 for < 1 MHz
Output Duty Cycle SYM 45 — 55 % —
Period Jitter, RMS JPER
— 9.5 11 psRMS
FOUT =
27 MHz
VDD = 1.8V
— 7.5 9 VDD = 2.5V/3.3V
Cycle-to-Cycle Jitter
(peak) JCy–Cy
—50 70 ps FOUT =
27 MHz
VDD = 1.8V
—35 60 V
DD = 2.5V/3.3V
DSC61XX ELECTRICAL CHARACTERISTICS (CONTINUED)
Electrical Characteristics: Unless otherwise indicated, VDD= 1.8V –5% to 3.3V +10%, TA= –40°C to 85°C.
Parameters Sym. Min. Typ. Max. Units Conditions
Note 1: Pin 4 VDD should be filtered with 0.1 uf capacitor.
2: Not including current through pull-up resistor on EN pin (if configured). Higher standby current seen at
>3.3V VDD.
3: Includes frequency variations due to initial tolerance, temp. and power supply voltage.
4: Input waveform must be monotonic with rise/fall time < 10 ms
5: Output Disable time takes up to 1 Period of the output waveform + 200 ns.
6: For parts configured with OE, not Standby.
7: Output is enabled if pad is floated or not connected.
2016 Microchip Technology Inc. DS20005624A-page 5
DSC61XX
TEMPERATURE SPECIFICATIONS
Parameters Sym. Min. Typ. Max. Units Conditions
Temperature Ranges
Junction Operating Temperature TJ— +150 — °C —
Storage Temperature Range TA–55 — +150 °C —
Soldering Temperature TS— +260 — °C 40 Sec. Max.
DSC61XX
DS20005624A-page 6 2016 Microchip Technology Inc.
2.0 PIN DESCRIPTIONS
The descriptions of the pins are listed in Table 2-1.
Note 1: DSC610x/1x/2x has 300 kΩ internal pull-up resistor on pin1. DSC614x/5x/6x has no internal pull-up resistor
on pin1 and needs external pull-up or being driven by other chip.
2: Two pre-programmed frequencies can be configured at http://clockworks.microchip.com/timing/
3: Bypass with 0.1μF capacitor placed as close to VDD pin as possible.
Note 1: Bypass with 0.1 μF capacitor placed as close to VDD pin as possible.
DSC61xx family is available in multiple output driver configurations.
The standard-drive (61x1) and high-drive (61x2) deliver respective output currents of greater than 3 mA and 6 mA at
20%/80% of the supply voltage. For heavy loads of 15 pF or higher, the high-drive option is recommended.
TABLE 2-1: DSC6101/03/11/13/21/23/41/43/51/53/61/63 PIN FUNCTION TABLE (OUTPUT
FREQUENCY ≥1MHZ)
Pin Number Pin Name Pin Type Description
1
OE
I
Output Enable: H = Specified Frequency Output, Note 1
L = Output is high impedance
STDBY
Standby: H = Specified Frequency Output, Note 1
L = Output is high impedance. Device is in low power
mode, supply current is at ISTBY
FS Frequency Select: H = Output Frequency 1, Note 2
L = Output Frequency 2
2 GND Power Power supply ground
3 Output O Oscillator clock output
4 VDD Power Power supply
TABLE 2-2: DSC6183 PIN FUNCTION TABLE (OUTPUT FREQUENCY <1MHZ)
Pin Number Pin Name Pin Type Description
1 Output O Kilohertz Oscillator clock output
2 GND Power Power supply ground
3 DNC DNC Do Not Connect
4 VDD Power Power supply, Note 1
2016 Microchip Technology Inc. DS20005624A-page 7
DSC61XX
3.0 OUTPUT WAVEFORM
FIGURE 3-1: OUTPUT WAVEFORM
VOH
VOL
VIL
1/fo
OUTPU
T
ENABLE
tDA
tEN
tF
tR
VIH
DSC61XX
DS20005624A-page 8 2016 Microchip Technology Inc.
4.0 TEST CIRCUIT
FIGURE 4-1: TEST CIRCUIT
µ
34
21 CL
2016 Microchip Technology Inc. DS20005624A-page 9
DSC61XX
5.0 BOARD LAYOUT (RECOMMENDED)
FIGURE 5-1: BOARD LAYOUT (RECOMMENDED)
DSC61XX
DS20005624A-page 10 2016 Microchip Technology Inc.
6.0 SOLDER REFLOW PROFILE
FIGURE 6-1: SOLDER REFLOW
60-150
Sec
20-40
Sec
60-180
Sec
8 min max
Pre heat
Reflow
Cool
Time
Temperature (°C)
3C/Sec Max.
6C/Sec Max.
200
°
C
217
°
C
150
°
C
25
°
C
260
°
C
3C/Sec Max.
60-150
Sec
20-40
Sec
60-180
Sec
8 min max
Pre heat
Reflow
Cool
Time
Temperature (°C)
3C/Sec Max.
6C/Sec Max.
200
°
C
217
°
C
150
°
C
25
°
C
260
°
C
60-150
Sec
20-40
Sec
60-180
Sec
8 min max
Pre heat
Reflow
Cool
Time
Temperature (°C)
3C/Sec Max.
6C/Sec Max.
200
°
C
217
°
C
150
°
C
25
°
C
260
°
C
3C/Sec Max.
MSL 1 @ 260°C refer to JSTD-020C
Ramp-Up Rate (200°C to Peak Temp) 3°C/Sec Max.
Preheat Time 150°C to 200°C 60-180 Sec
Time maintained above 217°C 60-150 Sec
Peak Temperature 255-260°C
Time within 5°C of actual Peak 20-40 Sec
Ramp-Down Rate 6°C/Sec Max.
Time 25°C to Peak Temperature 8 min. Max.
2016 Microchip Technology Inc. DS20005624A-page 11
DSC61XX
7.0 PACKAGING INFORMATION
4-Lead VFLGA 1.6 mm x 1.2 mm Package Outline
0.07 C A B
0.03 C
(DATUM B)
(DATUM A)
C
SEATING
PLANE
NOTE 1
12
N
TOP VIEW
SIDE VIEW
BOTTOM VIEW
NOTE 1
12
N
0.10 C
0.08 C
Microchip Technology Drawing C04-1199A Sheet 1 of 2
4X
For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
Note:
4-Lead Very Thin Fine Pitch Land Grid Array (ARA) - 1.6x1.2 mm Body [VFLGA]
D
E
B
A
0.05 C
0.05 C
2X
2X
4X L
b2
e
CH
CH
A
(A3)
A1
e1
e1
2
3X b1
DSC61XX
DS20005624A-page 12 2016 Microchip Technology Inc.
4-Lead VFLGA 1.6 mm x 1.2 mm Package Outline
Microchip Technology Drawing C04-1199A Sheet 2 of 2
REF: Reference Dimension, usually without tolerance, for information purposes only.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
1.
2.
3.
Notes:
Pin 1 visual index feature may vary, but must be located within the hatched area.
Package is saw singulated
Dimensioning and tolerancing per ASME Y14.5M
4-Lead Very Thin Fine Pitch Land Grid Array (ARA) - 1.6x1.2 mm Body [VFLGA]
For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
Note:
Number of Terminals
Overall Height
Overall Width
Terminal Length
Substrate Thickness (with Terminals)
Terminal Pitch
Standoff
Units
Dimension Limits
A1
A
b2
A3
e
L
E
N
1.20 BSC
0.20 REF
0.325
0.30
0.79
0.00
0.35
0.375
0.84
0.02
1.20 BSC
MILLIMETERS
MIN NOM
4
0.425
0.40
0.89
0.05
MAX
CH 0.125--Terminal 1 Index Chamfer
Overall Length D 1.60 BSC
Terminal Width
b1 0.25 0.30 0.35Terminal Width
Terminal Pitch e1 0.75 BSC
2016 Microchip Technology Inc. DS20005624A-page 13
DSC61XX
4-Lead VFLGA 1.6 mm x 1.2 mm Recommended Land Pattern
RECOMMENDED LAND PATTERN
Dimension Limits
Units
X2
Contact Width
Contact Pitch
MILLIMETERS
1.20 BSC
MIN
E1
MAX
Space Between Contacts (X4)
Contact Pad Length (X6)
G1
Y0.50
Microchip Technology Drawing C04-3199A
NOM
4-Lead Very Thin Fine Pitch Land Grid Array (ARA) - 1.6x1.2 mm Body [VFLGA]
SILK SCREEN
12
4
X1Contact Width (X3)
Space Between Contacts (X3) G2 0.25
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
Notes:
Dimensioning and tolerancing per ASME Y14.5M1.
For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
Note:
X1
Y
G2
(CH)
CContact Spacing 0.75
0.43
0.35
0.85
Contact 1 Index Chamfer CH 0.13 X 45° REF
C
E2
Contact Pitch 1.16 BSCE2
X2
G1
E1
DSC61XX
DS20005624A-page 14 2016 Microchip Technology Inc.
4-Lead VLGA 2.0 mm x 1.6 mm Package Outline
0.07 C A B
0.03 C
(DATUM B)
(DATUM A)
C
SEATING
PLANE
NOTE 1
12
N
TOP VIEW
SIDE VIEW
BOTTOM VIEW
NOTE 1
12
N
0.10 C
0.08 C
Microchip Technology Drawing C04-1200A Sheet 1 of 2
4X
For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
Note:
4-Lead Very Thin Fine Pitch Land Grid Array (ASA) - 2.0x1.6 mm Body [VFLGA]
D
E
B
A
0.05 C
0.05 C
2X
2X
4X L
b2
e
CH
CH
A
(A3)
A1
e1
e1
2
3X b1
2016 Microchip Technology Inc. DS20005624A-page 15
DSC61XX
4-Lead VLGA 2.0 mm x 1.6 mm Package Outline (Continued)
Microchip Technology Drawing C04-1200A Sheet 2 of 2
REF: Reference Dimension, usually without tolerance, for information purposes only.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
1.
2.
3.
Notes:
Pin 1 visual index feature may vary, but must be located within the hatched area.
Package is saw singulated
Dimensioning and tolerancing per ASME Y14.5M
4-Lead Very Thin Fine Pitch Land Grid Array (ASA) - 2.0x1.6 mm Body [VFLGA]
For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
Note:
Number of Terminals
Overall Height
Overall Width
Terminal Length
Substrate Thickness (with Terminals)
Terminal Pitch
Standoff
Units
Dimension Limits
A1
A
b2
A3
e
L
E
N
1.55 BSC
0.20 REF
0.40
0.50
0.79
0.00
0.55
0.45
0.84
0.02
1.60 BSC
MILLIMETERS
MIN NOM
6
0.50
0.60
0.89
0.05
MAX
CH 0.15--Terminal 1 Index Chamfer
Overall Length D 2.00 BSC
Terminal Width
b1 0.30 0.35 0.40Terminal Width
Terminal Pitch e1 0.95 BSC
DSC61XX
DS20005624A-page 16 2016 Microchip Technology Inc.
4-Lead VFLGA 2.0 mm x 1.6 mm Package Outline
RECOMMENDED LAND PATTERN
Dimension Limits
Units
X2
Contact Width (X2)
Contact Pitch
MILLIMETERS
1.55 BSC
MIN
E
MAX
Space Between Contacts (X4)
Contact Pad Length (X6)
G1
Y0.70
Microchip Technology Drawing C04-3200A
NOM
4-Lead Very Thin Fine Pitch Land Grid Array (ASA) - 2.0x1.6 mm Body [VFLGA]
SILK SCREEN
12
4
X1Contact Width (X4)
Space Between Contacts (X3) G2 0.25
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
Notes:
Dimensioning and tolerancing per ASME Y14.5M1.
For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
Note:
X1
YG2
G1
E
(CH)
CContact Spacing 0.95
0.40
0.50
1.05
Contact 1 Index Chamfer CH 0.13 X 45° REF
C
2016 Microchip Technology Inc. DS20005624A-page 17
DSC61XX
4-Lead VLGA 2.5 mm x 2.0 mm Package Outline
0.07 C A B
0.03 C
(DATUM B)
(DATUM A)
C
SEATING
PLANE
NOTE 1
12
N
TOP VIEW
SIDE VIEW
BOTTOM VIEW
NOTE 1
12
N
0.10 C
0.08 C
Microchip Technology Drawing C04-1202A Sheet 1 of 2
4X
For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
Note:
4-Lead Very Thin Land Grid Array (AUA) - 2.5x2.0 mm Body [VLGA]
D
E
B
A
0.05 C
0.05 C
2X
2X
4X L
e
CH
CH
A
(A3)
A1
e1
e1
2
4X b1
DSC61XX
DS20005624A-page 18 2016 Microchip Technology Inc.
4-Lead VLGA 2.5 mm x 2.0 mm Package Outline (Continued)
Microchip Technology Drawing C04-1202A Sheet 2 of 2
REF: Reference Dimension, usually without tolerance, for information purposes only.
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
1.
2.
3.
Notes:
Pin 1 visual index feature may vary, but must be located within the hatched area.
Package is saw singulated
Dimensioning and tolerancing per ASME Y14.5M
4-Lead Very Thin Land Grid Array (AUA) - 2.5x2.0 mm Body [VLGA]
For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
Note:
Number of Terminals
Overall Height
Overall Width
Terminal Length
Substrate Thickness (with Terminals)
Terminal Pitch
Standoff
Units
Dimension Limits
A1
A
A3
e
L
E
N
1.65 BSC
0.20 REF
0.60
0.79
0.00
0.65
0.84
0.02
2.00 BSC
MILLIMETERS
MIN NOM
4
0.70
0.89
0.05
MAX
CH 0.225--Terminal 1 Index Chamfer
Overall Length D 2.50 BSC
b1 0.60 0.65 0.70Terminal Width
Terminal Pitch e1 1.25 BSC
2016 Microchip Technology Inc. DS20005624A-page 19
DSC61XX
4-Lead VLGA 2.5 mm x 2.0 mm Recommended Land Pattern
RECOMMENDED LAND PATTERN
Dimension Limits
Units
Contact Pitch
MILLIMETERS
1.65 BSC
MIN
E
MAX
Space Between Contacts (X4)
Contact Pad Length (X6)
G1
Y0.80
Microchip Technology Drawing C04-3202A
NOM
4-Lead Very Thin Land Grid Array (AUA) - 2.5x2.0 mm Body [VLGA]
SILK SCREEN
12
4
XContact Width (X4)
Space Between Contacts (X3) G2 0.45
BSC: Basic Dimension. Theoretically exact value shown without tolerances.
Notes:
Dimensioning and tolerancing per ASME Y14.5M1.
For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
Note:
X
Y
G2C
E
(CH)
CContact Spacing 1.25
0.70
0.95
Contact 1 Index Chamfer CH 0.13 X 45° REF
G1
DSC61XX
DS20005624A-page 20 2016 Microchip Technology Inc.
4-Lead CDFN 3.2 mm x 2.5 mm Package Outline and Recommended Land Pattern
Note: For the most current package drawings, please see the Microchip Packaging Specification located at
http://www.microchip.com/packaging
TITLE
4 LEAD CDFN 3.2x2.5mm COL PACKAGE OUTLINE & RECOMMENDED LAND PATTERN
DRAWING # CDFN3225-4LD-PL-1 UNIT MM
NOTE:
1. Green shaded rectangles in Recommended Land Pattern are solder stencil opening.
2015 Microchip Technology Inc. DS20005624A-page 21
DSC61XX
APPENDIX A: REVISION HISTORY
Revision A (September 2016)
• Initial release of DSC61XX Microchip data sheet
DS20005624A.
DSC61XX
DS20005624A-page 22 2015 Microchip Technology Inc.
NOTES:
2016 Microchip Technology Inc. DS20005624A-page 23
DSC61XX
PRODUCT IDENTIFICATION SYSTEM
To order or obtain information, e.g., on pricing or delivery, contact your local Microchip representative or sales office.
Note 1: Please visit Microchip ClockWorks® Configurator Website to configure the part number for customized fre-
quency. http://clockworks.microchip.com/timing/.
Examples:
a) DSC6112JI2A-100.0000: Ultra–Low Power MEMS
Oscillator, Pin1= Standby
with internal Pull–Up, High
Output Drive Strength,
4-Lead 2.5 mm x 2.0 mm
VFLGA, Industrial Tem-
perature (–40°C to +85°C),
±25 ppm, Revision A,
100 MHz Frequency, Bulk.
b) DSC6101HE1A-016.0000T: Ultra–Low Power
MEMS Oscillator, Pin1= OE
with Internal Pull–Up, Stan-
dard Output Drive Strength,
4-Lead 1.6 mm x1.2 mm
VFLGA, Extended Com-
mercial Temperature
(–20°C to +70°C),
±50 ppm, Revision A,
16 MHz Frequency, Tape
and Reel.
c) DSC6183ME1A-032k768: Ultra–Low Power
MEMS Oscillator, Pin1=
32.768 KHz Clock Output,
Low Output Drive Strength,
4-Lead 2.0 mm x1.6 mm
VFLGA, Extended Com-
mercial Temperature
(–20°C to +70°C),
±50 ppm, Revision A, Bulk
d) DSC6121CI2A-001A: Ultra–Low Power MEMS
Oscillator, Pin1= FS with
internal Pull-up, Standard
Output Drive Strength, 4-
Lead 3.2 mm x 2.5 mm
CDFN, Industrial Tempera-
ture (-40 to 85C), ±25
ppm, Revision A, Fre-
quency code = 001A (con-
figured through
ClockWorks), Bulk
PART NO. X
Package
Device
Device: DSC61XX: Ultra-Low Power MEMS Oscillator
Pin Definition: Selection Pin 1 Internal Pull Register
0 OE Pull-up
1 STDBY Pull-up
2 FS Pull-up
4 OE None
5 STDBY None
6 FS None
8 KHz
Output
None
Output Drive
Strength:
1
2
Standard
High
Packages: C = 4-Lead 3.2 mm x 2.5 mm DFN
J = 4-Lead 2.5 mm x 2.0 mm VFLGA
M = 4-Lead 2.0 mm x 1.6 mm VFLGA
H = 4-Lead 1.6 mm x 1.2 mm VFLGA
Temperature
Range:
E = -20C to +70C (Extended Commercial)
I = -40C to +85C (Industrial)
Frequency
Stability:
1 = ± 50 ppm
2 = ± 25 ppm
Revision: A = Revision A
Frequency: xxx.xxxx = User-Defined Frequency between
001.0000 MHz and 100.0000 MHz
xxxkxxx = User-Defined Frequency between 002.000 kHz
and 999.999 kHz
xxxx = Frequency configuration code when pin 1 = FS.
Configure the part online through ClockWorks
Tape and Reel: Blank = Bulk
T = Tape and Reel
X
Pin 1
Definition
Note 1: Tape and Reel identifier only appears in the
catalog part number description. This
identifier is used for ordering purposes and
is not printed on the device package. Check
with your Microchip Sales Office for package
availability with the Tape and Reel option.
X
Output
Drive
Strength
X
Temperature
Range
X
Frequency
Stability
X
Revision
XXX.XXXX
Frequency
X
Tape
and
Reel
–
DSC61XX
DS20005624A-page 24 2016 Microchip Technology Inc.
NOTES:
2016 Microchip Technology Inc. DS20005624A-page 25
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights unless otherwise stated.
Trademarks
The Microchip name and logo, the Microchip logo, AnyRate,
dsPIC, FlashFlex, flexPWR, Heldo, JukeBlox, KeeLoq,
KeeLoq logo, Kleer, LANCheck, LINK MD, MediaLB, MOST,
MOST logo, MPLAB, OptoLyzer, PIC, PICSTART, PIC32 logo,
RightTouch, SpyNIC, SST, SST Logo, SuperFlash and UNI/O
are registered trademarks of Microchip Technology
Incorporated in the U.S.A. and other countries.
ClockWorks, The Embedded Control Solutions Company,
ETHERSYNCH, Hyper Speed Control, HyperLight Load,
IntelliMOS, mTouch, Precision Edge, and QUIET-WIRE are
registered trademarks of Microchip Technology Incorporated
in the U.S.A.
Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut,
BodyCom, chipKIT, chipKIT logo, CodeGuard, dsPICDEM,
dsPICDEM.net, Dynamic Average Matching, DAM, ECAN,
EtherGREEN, In-Circuit Serial Programming, ICSP, Inter-Chip
Connectivity, JitterBlocker, KleerNet, KleerNet logo, MiWi,
motorBench, MPASM, MPF, MPLAB Certified logo, MPLIB,
MPLINK, MultiTRAK, NetDetach, Omniscient Code
Generation, PICDEM, PICDEM.net, PICkit, PICtail,
PureSilicon, RightTouch logo, REAL ICE, Ripple Blocker,
Serial Quad I/O, SQI, SuperSwitcher, SuperSwitcher II, Total
Endurance, TSHARC, USBCheck, VariSense, ViewSpan,
WiperLock, Wireless DNA, and ZENA are trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
Silicon Storage Technology is a registered trademark of
Microchip Technology Inc. in other countries.
GestIC is a registered trademarks of Microchip Technology
Germany II GmbH & Co. KG, a subsidiary of Microchip
Technology Inc., in other countries.
All other trademarks mentioned herein are property of their
respective companies.
© 2016, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
ISBN: 978-1-5224-0961-8
Note the following details of the code protection feature on Microchip devices:
• Microchip products meet the specification contained in their particular Microchip Data Sheet.
• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
• Microchip is willing to work with the customer who is concerned about the integrity of their code.
• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
DS20005624A-page 26 2016 Microchip Technology Inc.
AMERICAS
Corporate Office
2355 West Chandler Blvd.
Chandler, AZ 85224-6199
Tel: 480-792-7200
Fax: 480-792-7277
Technical Support:
http://www.microchip.com/
support
Web Address:
www.microchip.com
Atlanta
Duluth, GA
Tel: 678-957-9614
Fax: 678-957-1455
Austin, TX
Tel: 512-257-3370
Boston
Westborough, MA
Tel: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Tel: 630-285-0071
Fax: 630-285-0075
Cleveland
Independence, OH
Tel: 216-447-0464
Fax: 216-447-0643
Dallas
Addison, TX
Tel: 972-818-7423
Fax: 972-818-2924
Detroit
Novi, MI
Tel: 248-848-4000
Houston, TX
Tel: 281-894-5983
Indianapolis
Noblesville, IN
Tel: 317-773-8323
Fax: 317-773-5453
Los Angeles
Mission Viejo, CA
Tel: 949-462-9523
Fax: 949-462-9608
New York, NY
Tel: 631-435-6000
San Jose, CA
Tel: 408-735-9110
Canada - Toronto
Tel: 905-695-1980
Fax: 905-695-2078
ASIA/PACIFIC
Asia Pacific Office
Suites 3707-14, 37th Floor
Tower 6, The Gateway
Harbour City, Kowloon
Hong Kong
Tel: 852-2943-5100
Fax: 852-2401-3431
Australia - Sydney
Tel: 61-2-9868-6733
Fax: 61-2-9868-6755
China - Beijing
Tel: 86-10-8569-7000
Fax: 86-10-8528-2104
China - Chengdu
Tel: 86-28-8665-5511
Fax: 86-28-8665-7889
China - Chongqing
Tel: 86-23-8980-9588
Fax: 86-23-8980-9500
China - Dongguan
Tel: 86-769-8702-9880
China - Guangzhou
Tel: 86-20-8755-8029
China - Hangzhou
Tel: 86-571-8792-8115
Fax: 86-571-8792-8116
China - Hong Kong SAR
Tel: 852-2943-5100
Fax: 852-2401-3431
China - Nanjing
Tel: 86-25-8473-2460
Fax: 86-25-8473-2470
China - Qingdao
Tel: 86-532-8502-7355
Fax: 86-532-8502-7205
China - Shanghai
Tel: 86-21-5407-5533
Fax: 86-21-5407-5066
China - Shenyang
Tel: 86-24-2334-2829
Fax: 86-24-2334-2393
China - Shenzhen
Tel: 86-755-8864-2200
Fax: 86-755-8203-1760
China - Wuhan
Tel: 86-27-5980-5300
Fax: 86-27-5980-5118
China - Xian
Tel: 86-29-8833-7252
Fax: 86-29-8833-7256
ASIA/PACIFIC
China - Xiamen
Tel: 86-592-2388138
Fax: 86-592-2388130
China - Zhuhai
Tel: 86-756-3210040
Fax: 86-756-3210049
India - Bangalore
Tel: 91-80-3090-4444
Fax: 91-80-3090-4123
India - New Delhi
Tel: 91-11-4160-8631
Fax: 91-11-4160-8632
India - Pune
Tel: 91-20-3019-1500
Japan - Osaka
Tel: 81-6-6152-7160
Fax: 81-6-6152-9310
Japan - Tokyo
Tel: 81-3-6880- 3770
Fax: 81-3-6880-3771
Korea - Daegu
Tel: 82-53-744-4301
Fax: 82-53-744-4302
Korea - Seoul
Tel: 82-2-554-7200
Fax: 82-2-558-5932 or
82-2-558-5934
Malaysia - Kuala Lumpur
Tel: 60-3-6201-9857
Fax: 60-3-6201-9859
Malaysia - Penang
Tel: 60-4-227-8870
Fax: 60-4-227-4068
Philippines - Manila
Tel: 63-2-634-9065
Fax: 63-2-634-9069
Singapore
Tel: 65-6334-8870
Fax: 65-6334-8850
Taiwan - Hsin Chu
Tel: 886-3-5778-366
Fax: 886-3-5770-955
Taiwan - Kaohsiung
Tel: 886-7-213-7828
Taiwan - Taipei
Tel: 886-2-2508-8600
Fax: 886-2-2508-0102
Thailand - Bangkok
Tel: 66-2-694-1351
Fax: 66-2-694-1350
EUROPE
Austria - Wels
Tel: 43-7242-2244-39
Fax: 43-7242-2244-393
Denmark - Copenhagen
Tel: 45-4450-2828
Fax: 45-4485-2829
France - Paris
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79
Germany - Dusseldorf
Tel: 49-2129-3766400
Germany - Karlsruhe
Tel: 49-721-625370
Germany - Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44
Italy - Milan
Tel: 39-0331-742611
Fax: 39-0331-466781
Italy - Venice
Tel: 39-049-7625286
Netherlands - Drunen
Tel: 31-416-690399
Fax: 31-416-690340
Poland - Warsaw
Tel: 48-22-3325737
Spain - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Sweden - Stockholm
Tel: 46-8-5090-4654
UK - Wokingham
Tel: 44-118-921-5800
Fax: 44-118-921-5820
Worldwide Sales and Service
06/23/16
