Features
n RoHS compliant* and halogen free**
n Surface mount SMC package
n Standoff voltage: 5 to 170 volts
n Peak Pulse Power: 5000 watts
n AEC-Q101 compliant***
n UL Recognized
Applications
n Protection of power buses
n Protection of I/O interfaces
n Overvoltage transient protection
n Telecom, computer, industrial and
consumer electronics applications
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
5.0SMDJ-Q Transient Voltage Suppressor Diode Series
* RoHS Directive 2015/863, Mar 31, 2015 and Annex.
** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
*** Q suffix for automotive and other applications requiring appropriate AEC-Q101 compliance for electronic limiters.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Parameter Symbol Value Unit
Minimum Peak Pulse Power Dissipation (Tp = 1 ms) (Note 1,2) PPK 5000 Watts
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method) (Note 3,4)
IFSM 300 Amps
Steady State Power Dissipation @ TL = 50 °C PM(AV) 6.5 Watts
Maximum Instantaneous Forward Voltage @ IPP = 100 A
(For Unidirectional Units Only) VF5 Volts
Operating Temperature Range TJ-55 to +150 °C
Storage Temperature Range TSTG -55 to +150 °C
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
4. Mounted on 8.0 mm x 8.0 mm copper pad area to each terminal.
General Information
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection
applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage
Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V
and Breakdown Voltage up to 189 V. Typical fast response times are less than 1.0 ps from
0 V to Breakdown Voltage.
Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick
and place equipment and the at conguration minimizes roll away.
How to Order
5.0SMDJ 12 CA - Q
Package
5.0SMDJ = SMC/DO-214AB
Working Peak Reverse Voltage
12 = 12 VRWM (Volts)
Sufx
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
AEC-Q101 Compliant Sufx
Q = AEC-Q101 Compliant, 3000 pcs. per 13-inch Reel
QH = AEC-Q101 Compliant, 500 pcs. per 7-inch Reel
*RoHS COMPLIANT,**HALOGEN FREE
and ***AEC-Q101 COMPLIANT
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Agency Recognition
Description
UL File Number: E153537
Asia-Pacic:
Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
Europe:
Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas:
Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
5.0SMDJ-Q Transient Voltage Suppressor Diode Series
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Unidirectional Device Bidirectional Device Breakdown Voltage
VBR (Volts)
Reverse
Standoff
Voltage
Max.
Reverse
Leakage
@ VRWM
Max.
Clamping
Voltage
@ Ipp
(10/1000 µs)
Max.
Peak
Pulse
Current
(10/1000 µs)
Max.
Clamping
Voltage
@ Ipp
(8/20 µs)
Max.
Peak
Pulse
Current
(8/20 µs)
Part
Number
Part
Marking
Part
Number
Part
Marking Min. Max. @ IT
(mA)
VRWM
(V)
IR
(μA)
Vc
(V)
Ipp
(A)
Vc
(V)
Ipp
(A)
5.0SMDJ5.0A-Q 5RDEQ 5.0SMDJ5.0CA-Q 5DDEQ 6.40 7.00 10 5.0 1050 9.2 543.6 12.0 4077.0
5.0SMDJ6.0A-Q 5RDGQ 5.0SMDJ6.0CA-Q 5DDGQ 6.67 7.37 10 6.0 1050 10.3 485.5 13.4 3641.3
5.0SMDJ6.5A-Q 5RDKQ 5.0SMDJ6.5CA-Q 5DDKQ 7.22 7.98 10 6.5 750 11.2 446.5 14.6 3348.8
5.0SMDJ7.0A-Q 5PDMQ 5.0SMDJ7.0CA-Q 5DDMQ 7.78 8.60 10 7.0 300 12.0 416.8 15.6 3126.0
5.0SMDJ7.5A-Q 5PDPQ 5.0SMDJ7.5CA-Q 5DDPQ 8.33 9.21 1 7.5 150 12.9 387.7 16.8 2907.8
5.0SMDJ8.0A-Q 5PDRQ 5.0SMDJ8.0CA-Q 5DDRQ 8.89 9.83 1 8.0 70 13.6 367.7 17.7 2757.8
5.0SMDJ8.5A-Q 5PDTQ 5.0SMDJ8.5CA-Q 5DDTQ 9.44 10.40 1 8.5 30 14.4 347.3 18.7 2604.8
5.0SMDJ9.0A-Q 5PDVQ 5.0SMDJ9.0CA-Q 5DDVQ 10.00 11.10 1 9.0 12 15.4 324.8 20.0 2436.0
5.0SMDJ10A-Q 5PDXQ 5.0SMDJ10CA-Q 5DDXQ 11.10 12.30 1 10.0 6 17.0 294.2 22.1 2206.5
5.0SMDJ11A-Q 5PDZQ 5.0SMDJ11CA-Q 5DDZQ 12.20 13.50 1 11.0 2 18.2 274.8 23.7 2061.0
5.0SMDJ12A-Q 5PEPQ 5.0SMDJ12CA-Q 5BEPQ 13.30 14.70 1 12.0 2 19.9 252.0 25.9 1890.0
5.0SMDJ13A-Q 5PEQQ 5.0SMDJ13CA-Q 5BEQQ 14.40 15.90 1 13.0 2 21.5 233.0 28.0 1747.5
5.0SMDJ14A-Q 5PERQ 5.0SMDJ14CA-Q 5BERQ 15.60 17.20 1 14.0 2 23.2 216.0 30.2 1620.0
5.0SMDJ15A-Q 5PESQ 5.0SMDJ15CA-Q 5BESQ 16.70 18.50 1 15.0 2 24.4 205.0 31.7 1537.5
5.0SMDJ16A-Q 5PETQ 5.0SMDJ16CA-Q 5BETQ 17.80 19.70 1 16.0 2 26.0 193.0 33.8 1447.5
5.0SMDJ17A-Q 5PEUQ 5.0SMDJ17CA-Q 5BEUQ 18.90 20.90 1 17.0 2 27.6 181.0 35.9 1357.5
5.0SMDJ18A-Q 5PEVQ 5.0SMDJ18CA-Q 5BEVQ 20.00 22.10 1 18.0 2 29.2 172.0 38.0 1290.0
5.0SMDJ20A-Q 5PEWQ 5.0SMDJ20CA-Q 5BEWQ 22.20 24.50 1 20.0 2 32.4 155.0 42.1 1162.5
5.0SMDJ22A-Q 5PEXQ 5.0SMDJ22CA-Q 5BEXQ 24.40 26.90 1 22.0 2 35.5 141.0 46.2 1057.5
5.0SMDJ24A-Q 5PEZQ 5.0SMDJ24CA-Q 5BEZQ 26.70 29.50 1 24.0 2 38.9 129.0 50.6 967.5
5.0SMDJ26A-Q 5PFEQ 5.0SMDJ26CA-Q 5BFEQ 28.90 31.90 1 26.0 2 42.1 119.0 54.7 892.5
5.0SMDJ28A-Q 5PFGQ 5.0SMDJ28CA-Q 5BFGQ 31.10 34.40 1 28.0 2 45.4 110.0 59.0 825.0
5.0SMDJ30A-Q 5PFKQ 5.0SMDJ30CA-Q 5BFKQ 33.30 36.80 1 30.0 2 48.4 103.0 62.9 772.5
5.0SMDJ33A-Q 5PFMQ 5.0SMDJ33CA-Q 5BFMQ 36.70 40.60 1 33.0 2 53.3 93.9 69.3 704.3
5.0SMDJ36A-Q 5PFPQ 5.0SMDJ36CA-Q 5BFPQ 40.00 44.20 1 36.0 2 58.1 86.1 75.5 645.8
5.0SMDJ40A-Q 5PFRQ 5.0SMDJ40CA-Q 5BFRQ 44.40 49.10 1 40.0 2 64.5 77.6 83.9 582.0
5.0SMDJ43A-Q 5PFTQ 5.0SMDJ43CA-Q 5BFTQ 47.80 52.80 1 43.0 2 69.4 72.1 90.2 540.8
5.0SMDJ45A-Q 5PFVQ 5.0SMDJ45CA-Q 5BFVQ 50.00 55.30 1 45.0 2 72.7 68.8 94.5 516.0
5.0SMDJ48A-Q 5PFXQ 5.0SMDJ48CA-Q 5BFXQ 53.30 58.90 1 48.0 2 77.4 64.7 100.6 485.3
5.0SMDJ51A-Q 5PFZQ 5.0SMDJ51CA-Q 5BFZQ 56.70 62.70 1 51.0 2 82.4 60.7 107.1 455.3
5.0SMDJ54A-Q 5RGEQ 5.0SMDJ54CA-Q 5BGEQ 60.00 66.30 1 54.0 2 87.1 57.5 113.2 431.3
5.0SMDJ58A-Q 5PGGQ 5.0SMDJ58CA-Q 5BGGQ 64.40 71.20 1 58.0 2 93.6 53.5 121.7 401.3
5.0SMDJ60A-Q 5PGKQ 5.0SMDJ60CA-Q 5BGKQ 66.70 73.70 1 60.0 2 96.8 51.7 125.8 387.8
5.0SMDJ64A-Q 5PGMQ 5.0SMDJ64CA-Q 5BGMQ 71.10 78.60 1 64.0 2 103.0 48.6 133.9 364.5
5.0SMDJ70A-Q 5PGPQ 5.0SMDJ70CA-Q 5BGPQ 77.80 86.00 1 70.0 2 113.0 44.3 146.9 332.3
5.0SMDJ75A-Q 5PGRQ 5.0SMDJ75CA-Q 5BGRQ 83.30 92.10 1 75.0 2 121.0 41.4 157.3 310.5
5.0SMDJ78A-Q 5PGTQ 5.0SMDJ78CA-Q 5BGTQ 86.70 95.80 1 78.0 2 126.0 39.7 163.8 297.8
5.0SMDJ85A-Q 5PGVQ 5.0SMDJ85CA-Q 5BGVQ 94.40 104.00 1 85.0 2 137.0 36.5 178.1 273.8
Note:
1. ‘Q’ sufx denotes AEC-Q101 compliance.
Continued on next page
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Product Dimensions
5.0SMDJ-Q Transient Voltage Suppressor Diode Series
Recommended Footprint
Physical Specications
Encapsulation .............................Molded plastic per UL Class 94V-0
Polarity....................... Cathode band indicates unidirectional device
No cathode band indicates bidirectional device
DIMENSIONS: MM
(INCHES)
Dimension SMC (DO-214AB)
A6.60 - 7.11
(0.260 - 0.280)
B5.59 - 6.22
(0.220 - 0.245)
C2.90 - 3.20
(0.114 - 0.126)
D0.15 - 0.31
(0.006 - 0.012)
E7.75 - 8.13
(0.305 - 0.320)
F 0.20 MAX.
(0.008)
G 2.01 - 2.62
(0.080 - 0.103)
H 0.76 - 1.52
(0.030 - 0.060)
DIMENSIONS: MM
(INCHES)
Dimension SMC (DO-214AB)
A (Max.) 4.69
(0.185)
B (Min.) 3.07
(0.121)
C (Min.) 1.53
(0.060)
Environmental Specications
Moisture Sensitivity Level ................................................................1
ESD Classication (HBM)............................................................. 3B
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) - Continued
Unidirectional Device Bidirectional Device Breakdown Voltage
VBR (Volts)
Reverse
Standoff
Voltage
Maximum
Reverse
Leakage
@ VRWM
Max.
Clamping
Voltage
@ Ipp
(10/1000 µs)
Max.
Peak
Pulse
Current
(10/1000
µs)
Max.
Clamping
Voltage
@ Ipp
(8/20 µs)
Max.
Peak
Pulse
Current
(8/20 µs)
Part
Number
Part
Marking
Part
Number
Part
Marking Min. Max. @ IT
(mA)
VRWM
(V)
IR
(μA)
Vc
(V)
Ipp
(A)
Vc
(V)
Ipp
(A)
5.0SMDJ90A-Q 5PGXQ 100.00 111.00 1 90.0 2 146.0 34.3 189.8 257.3
5.0SMDJ100A-Q 5PGZQ 111.00 123.00 1 100.0 2 162.0 30.9 210.6 231.8
5.0SMDJ110A-Q 5PHEQ 122.00 135.00 1 110.0 2 177.0 28.3 230.1 212.3
5.0SMDJ120A-Q 5PHGQ 133.00 147.00 1 120.0 2 193.0 26.0 250.9 195.0
5.0SMDJ130A-Q 5PHKQ 144.00 159.00 1 130.0 2 209.0 24.0 271.7 180.0
5.0SMDJ150A-Q 5PHMQ 167.00 185.00 1 150.0 2 243.0 20.6 315.9 154.5
5.0SMDJ160A-Q 5PHPQ 178.00 197.00 1 160.0 2 259.0 19.3 336.7 144.8
5.0SMDJ170A-Q 5PHRQ 189.00 209.00 1 170.0 2 275.0 18.2 357.5 136.5
C
BC
B
MM
(INCHES)
DIMENSIONS:
A
CATHODE BAND
(UNIDIRECTIONAL DEVICES ONLY)
G
H
E
FD
A
C
BC
B
MM
(INCHES)
DIMENSIONS:
A
CATHODE BAND
(UNIDIRECTIONAL DEVICES ONLY)
G
H
E
FD
A
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
100
50
0
0 1.0 2.0 3.0 4.0
T, Time (ms)
IP, Peak Pulse Current (%)
TA=25 °C
TP
TR=10 µs
Half value= IRSM
2
Peak value (IRSM)
Pulse width (TP)
is defined as that point
where the peak current
decays to 50 % of IPSM.
10 x 1000 waveform
as defined by R.E.A.
100
75
50
25
0
050
25 75 100 150125 175 200
Junction Temperature (
Peak Pulse Derating in Percent of
Peak Power or Current
°C)
10 x 1000 Waveform as Defined
by R.E.A.
Peak Forward Surge Current (Amps)
250
200
150
100
50
300
0
12510 20 50 100
Number of Cycles at 60 Hz
300 A at 1 cycle
100 A at 80 cycles
4.0
5.0
3.0
2.0
1.0
0.0
05025 75 100 150125 175 200
TL, Lead Temperature (°C)
PM(AV) Steady State Power Dissipation (W)
6.0
6.5
5.5
4.5
3.5
2.5
1.5
0.5
0.1 µs1.0 µs10 µs100 µs1.0 ms 10 ms
td - Pulse Width (sec.)
0.1
1
10
100
1000
P
PPM
- Peak Pulse Power (kW)
TA = 25 °C
8.0 x 8.0 mm
(0.31 x 0.31 in.)
Copper Pad Areas
60 Hz Resistive or
Inductive Load
CJ - Junction Capacitance (pF)
100000
10000
100
10
1
110 100 1000
VBR - Reverse Breakdown Voltage (V)
1000 Unidirectional
@ VR
Bidirectional
@ VR
Unidirectional v=0v
Bidirectional v=0v
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
5.0SMDJ-Q Transient Voltage Suppressor Diode Series
Rating & Characteristic Curves
Pulse Derating Curve Maximum Non-Repetitive Surge Current
Pulse Waveform Typical Junction Capacitance
Pulse Rating Curve Steady State Power Derating Curve
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
.......
.......
....... ..............
....... ..............
P A
F
ET
120 °
D2
DD
1
W1
C
Index Hole
P
0
P
1
W
B
10 pitches (min.)
Direction of Feed
10 pitches (min.)
End
Trailer Device
Unidirectional
Product
Orientation Leader
Start
d
CDDFN5-0504N - TVS/Steering Diode Array
Packaging Information
The product will be dispensed in tape and reel format (see diagram below).
Devices are packed in accordance with EIA standard
EIA-481-D and specications shown here.
DIMENSIONS: MM
(INCHES)
Item Symbol SMC (DO-214AB)
7-Inch Reel 13-Inch Reel
Carrier Width A 6.0 ± 0.20
(0.236 ± 0.079)
Carrier Length B 8.3 ± 0.20
(0.327 ± 0.008)
Carrier Depth C 2.5 ± 0.20
(0.098 ± 0.008)
Sprocket Hole d 1.50 ± 0.10
(0.059 ± 0.004)
Reel Outside Diameter D 178
(7.008)
330
(12.992)
Reel Inner Diameter D1 50.0
(1.969) MIN.
Feed Hole Diameter D2 13.0 +0.50/-0.20
(0.512 +0.020/-0.008)
Sprocket Hole Position E 1.75 ± 0.10
(0.069 ± 0.004)
Punch Hole Position F 7.50 ± 0.10
(0.295 ± 0.004)
Punch Hole Pitch P 8.00 ± 0.10
(0.315 ± 0.004)
Sprocket Hole Pitch P0 4.00 ± 0.10
(0.157 ± 0.004)
Embossment Center P1 2.00 ± 0.10
(0.079 ± 0.004)
Overall Tape Thickness T 0.30± 0.10
(0.012 ± 0.004)
Tape Width W 16.00 ± 0.30
(0.630 ± 0.012)
Reel Width W122.4
(0.882) MAX.
Quantity per Reel -- 500 3,000
REV. 03/20
5.0SMDJ-Q Transient Voltage Suppressor Diode Series
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
afliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specic devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualication (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualication. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap-
plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identied by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classications outside of the United States.
Bourns expressly identies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identication means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost prots, and (ii) any and all implied warranties, including implied warranties
of tness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplied Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R