P16E.pdf Oct.1,2018 Ceramic Resonators (CERALOCKr) !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. EU RoHS Compliant * All the products in this catalog comply with EU RoHS. * EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." * For more details, please refer to our web page, "Murata's Approach for EU RoHS" (https://www.murata.com/en-eu/support/ compliance/rohs). P16E.pdf Oct.1,2018 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 1 Contents Product specifications are as of October 2018. CERALOCKr, CERALOCK(R) and "CERALOCK" in this catalog are the trademarks of Murata Manufacturing Co., Ltd. Selection Guide p2 Part Numbering p3 2 1 MHz Chip Type -Tight Frequency Tolerance for Automotive p4 3 2 MHz Chip Type -Standard Frequency Tolerance for Automotive Notice for Automotive Packaging for Automotive p6 p8 p11 4 3 MHz Chip Type -Tight Frequency Tolerance for Consumer/Industrial Usage p13 5 4 MHz Chip Type -Standard Frequency Tolerance for Consumer/Industrial Usage p15 5 MHz Lead Type -Standard Frequency Tolerance for Consumer/Industrial Usage p17 Notice for Consumer/Industrial Usage MHz Chip Type p19 MHz Lead Type p21 Packaging for Consumer/Industrial Usage MHz Chip Type p22 MHz Lead Type p24 Please check the MURATA website (https://www.murata.com/) if you cannot find a part number in this catalog. !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Selection Guide Applications Automotive Consumer/Industrial Tight Tolerance Standard Tolerance Tight Tolerance Standard Tolerance SMD SMD SMD SMD CSTNR_GH5C CSTCR_G_B CSTNR_GH5L CSTCR_G 4.00-7.99MHz 4.00-7.99MHz 4.00-7.99MHz 4.00-7.99MHz CSTNE_GH5C CSTNE_G_A CSTCE_G_A CSTNE_GH5L CSTNE_G CSTCE_G 8.00-13.99MHz CSTNE_VH3C 14.00-20.00MHz 8.00-13.99MHz CSTNE_V_C CSTCE_V_C 14.00-20.00MHz 8.00-13.99MHz CSTNE_VH3L 14.00-20.00MHz 8.00-13.99MHz CSTNE_V CSTCE_V 14.00-20.00MHz Leaded CSTLS_G 3.40-10.00MHz CSTLS_X 16.00-70.00MHz Notice: "CERALOCKr for consumer" and "CERALOCKr for automotive" is different in the specification of Operating Temperature Range, Environmental Characteristics, Physical Characteristics and so on. Please choose either "for consumer" or "for automotive" according to the required specification. 2 P16E.pdf Oct.1,2018 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf Oct.1,2018 o Part Numbering CERALOCKr (MHz) (Part Number) CS T NE 16M0 V 1 2 3 4 5 3 **** R0 5 6 7 8 9 7Load Capacity 1Product ID Product ID Code CS Ceramic Resonators 2Frequency/Capacitance Load Capacity 1 5pF 2 10pF 3 15pF Code Frequency/Capacitance 5 33/39pF T MHz with Built-in Capacitance 6 47pF 8Individual Specification 3Structure/Size Code Structure/Size LS Round Lead Type CR/NR/CE/NE Small-cap Chip Type Code **** Individual Specification Four-digit alphanumerics express "Individual Specification." With standard products, "8Individual Specification" and "9Packaging" is omitted. 4Nominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Decimal point is expressed by capital letter "M." 9Packaging Code 5Design Packaging B0 Bulk Code Design A0 Radial Taping H0=18mm G Thickness Shear mode R0 Plastic Taping o=180mm Reel R1 Plastic Taping o=330mm Reel V Thickness Expander mode X Thickness Expander mode (3rd overtone) F"'*2.',%'1..*'#"2-*#"27.#,".*12'!2.',%2-!&'.27.#@ 6Initial Frequency Tolerance Code Initial Frequency Tolerance 5 0.5% 3 0.3% 2 0.2% H 0.07% 3 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 1 Oct.1,2018 Ceramic Resonators (CERALOCKr) MHz Chip Type -Tight Frequency Tolerance for Automotive 1.10.1 4.1 max. 0.4 (Ref.) 0.4 (Ref.) 0.4 (Ref.) (3) (2) 0.40.1 (1) 0.40.1 CSTNR_GH5C 4.00-7.99MHz 0.750.1 1. High accuracy resonators whose total tolerance is available for less than 3,000ppm. 2. High reliability and available for a wide temperature range. 3. Oscillation circuits do not require external load capacitors. 4. Available for a wide frequency range. 5. Extremely small and have a low profile. 6. No adjustment is necessary for oscillation circuits. 7. Stable supply is ensured due to not using precious metal (Paradium) in built-in Capacitance. 1.50.1 0.40.1 (1): Input (2): GND (3): Output : Frequency Marking * : EIAJ Monthly Code 1.50.1 (in mm) * 1.1 max. 1.300.15 0.100.10 3.200.15 0.40.1 0.10.1 3.0 max. 0.50 (ref.) 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 (1): Input (2): GND (3): Output : Frequency Marking * : EIAJ Monthly Code CSTNE_GH5C 8.00-13.99MHz 0.40.1 1. Cluster panel and Control panel 2. Safety control Anti-lock Brake System, Electronic Stability Control, Airbag, etc. 3. Engine ECU, Electronic Power Steering, Immobilizer, etc. 4. Car Air conditioner, Power Window, Remote Keyless Entry system, etc. 5. Intelligent Transportation System Lane Keeping System, Millimeter wave radar, etc. 6. Battery control for hybrid cars 1.20.1 1.20.1 1.1 max. * 0.40.1 0.10.1 3.0 max. 0.50 (ref.) 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 0.40.1 Initial Frequency Tolerance (%) 1.300.15 0.100.10 3.200.15 CSTNE_VH3C 14.00-20.00MHz Frequency (MHz) (in mm) 0.900.10 Applications (1): Input (2): GND (3): Output : Frequency Marking * : EIAJ Monthly Code 1.20.1 1.20.1 (in mm) Frequency Shift by Temperature (%) Operating Temperature Range (C) CSTNR_GH5C 4.00 to 7.99 0.07 0.13 -40 to 125 CSTNE_GH5C 8.00 to 13.99 0.07 0.13 -40 to 125 CSTNE_VH3C 14.00 to 20.00 0.07 0.13 -40 to 125 Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 4 1.4 max. 0.60.05 0.20.2 Features Part Number 2.00.1 * 0.700.10 Chip type CERALOCKr with built-in load capacitors provides high accuracy in an extremely small package. MURATA's frequency adjustment and package technology expertise has enabled the development of the chip CERALOCKr with built-in load capacitors. This diverse series owes its development to MURATA's original mass production techniques and high reliability, and has achieved importance in the worldwide automotive market. 0.300.20 4.50.1 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Measuring Circuit of Oscillating Frequency 1 VDD 5pF To Frequency Counter Rf 1M Rd (1) (3) C1 C2 (2) Standard Land Pattern Dimensions CSTNR_GH5C (* This Land Pattern is not common to CSTCR_G.) 0.4 1.1 0.4 1.1 CSTNE_GH5C/CSTNE_VH3C 0.4 0.8 0.4 0.8 0.4 1.9 2.6 0.4 1.2 1.5 1.5 1.2 Land Pattern Land Pattern (in mm) (in mm) Frequency Temperature Characteristics CSTNR_GH5C CSTNE_GH5C +0.2 Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) +0.2 +0.1 +0.1 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 CSTNE_VH3C Oscillating Frequency Shift (%) +0.2 +0.1 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 5 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Ceramic Resonators (CERALOCKr) MHz Chip Type -Standard Frequency Tolerance for Automotive (3) 0.20.2 (2) 0.40.05 (1) 4.1 max. 0.4 (Ref.) 0.4 (Ref.) 0.4 (Ref.) 0.80.1 CSTCR_G_B 4.00-7.99MHz 0.80.1 0.80.1 0.40.1 0.40.1 0.750.1 1.50.1 1.4 max. 2.00.1 * 1.150.05 2 Chip type CERALOCKr with built-in load capacitors provides high accuracy in an extremely small package. MURATA's frequency adjustment and package technology expertise has enabled the development of the chip CERALOCKr with built-in load capacitors. This diverse series owes its development to MURATA's original mass production techniques and high reliability, and has achieved importance in the worldwide automotive market. 0.30.2 4.50.1 (1): Input (2): GND (3): Output : Frequency Marking * : EIAJ Monthly Code 0.40.1 1.50.1 (in mm) Features 1. High reliability and available for a wide temperature range. 2. Oscillation circuits do not require external load capacitors. 3. Available for a wide frequency range. 4. Extremely small and have a low profile. 5. No adjustment is necessary for oscillation circuits. * 1.1 max. 1.300.15 0.100.10 3.200.15 0.40.1 0.10.1 Applications 0.700.10 3.0 max. 0.50 (ref.) 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 (1): Input (2): GND (3): Output : Frequency Marking * : EIAJ Monthly Code CSTNE_G_A 8.00-13.99MHz 0.40.1 1.20.1 1.20.1 (in mm) * 1.1 max. 1.300.15 3.200.15 0.100.10 1. Cluster panel and Control panel 2. Safety control Anti-lock Brake System, Electronic Stability Control, Airbag, etc. 3. Engine ECU, Electronic Power Steering, Immobilizer, etc. 4. Car Air conditioner, Power Window, Remote Keyless Entry system, etc. 5. Electronic Toll Collection system, Car Navigation, etc. 0.40.1 0.10.1 0.50 (ref.) 0.900.10 3.0 max. 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 CSTNE_V_C 14.00-20.00MHz 0.40.1 1.20.1 1.20.1 (in mm) Frequency (MHz) Initial Frequency Tolerance (%) Frequency Shift by Temperature (%) Operating Temperature Range (C) CSTCR_G_B 4.00 to 7.99 0.50 0.15 -40 to 125 CSTNE_G_A 8.00 to 13.99 0.50 0.20 -40 to 125 CSTNE_V_C 14.00 to 20.00 0.50 0.15 -40 to 125 Part Number Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 6 (1): Input (2): GND (3): Output : Frequency Marking * : EIAJ Monthly Code P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Measuring Circuit of Oscillating Frequency CSTNE_G_A/CSTNE_V_C/CSTCR_G_B VDD 5pF To Frequency Counter Rf 1M Rd (1) 2 (3) C1 C2 (2) Standard Land Pattern Dimensions CSTCR_G_B CSTNE_G_A/CSTNE_V_C 0.8 0.7 0.8 0.7 0.8 0.8 0.4 0.8 0.4 1.9 2.6 1.6 0.4 0.4 1.5 0.4 1.5 0.4 1.2 1.2 Land Pattern Land Pattern (in mm) (in mm) Frequency Temperature Characteristics CSTCR_G_B CSTNE_G_A +0.2 Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) +0.2 +0.1 +0.1 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 CSTNE_V_C Oscillating Frequency Shift (%) +0.2 +0.1 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 7 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Notice for Automotive Soldering and Mounting (CSTCR_G_B/CSTNR_GH5C, CSTNE_G_A/GH5C, CSTNE_V_C/VH3C Series) 1. Soldering (1) Reflow soldering Please mount the component on a circuit board by reflow soldering. Flow soldering is not acceptable. Recommendable Flux and Solder Please use rosin based flux, not water soluble flux. Solder Please use solder (Sn-3.0Ag-0.5Cu) under the following conditions: Standard thickness of soldering paste: 0.10 to 0.15mm. Recommendable Soldering Profile Pre-heating 60 to 120s 220C min. 30 to 60s upper limit: 260C 1s max. lower limit: 245C 5s max. Heating Peak Temperature 150 to 180C Peak Temperature (C) Flux 260 245 220 Heating (220C min.) 180 150 Pre-heating (150 to 180C) 60 to 120s Gradual Cooling 30 to 60s Temperature shall be measured on the surface of component. (2) Soldering with Iron If compelled to mount the component by using a soldering iron, please do not directly touch the component with the soldering iron. The component terminals or electrical characteristics may be damaged if excessive thermal stress is applied. Recommendable Soldering with Iron Heating of the soldering iron Watt Shape of the soldering iron Soldering Time Solder 350C max. 30W max. o3mm max. 5s max. at one terminal Sn-3.0Ag-0.5Cu (3) Solder Volume Please make the solder volume less than the height of the substrate to avoid damage to the seal between the metal cap and the substrate. (4) Other Do not reuse components removed from a circuit board after soldering. (5) Conditions for Placement Machines The component is recommended with placement machines that employ optical placement capabilities. The component may be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. Continued on the following page. 8 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf Oct.1,2018 Notice for Automotive Continued from the preceding page. 2. Wash (1) Cleaning Solvents HCFC, Isopropanol, Tap water, Demineralized water, Cleanthrough750H, Pine alpha 100S, Techno care FRW (2) Temperature Difference : dT *1 dT< =60C (dT=Component-solvent) *1 ex. If the component is immersed at +90C into cleaning solvent at +60C, then dT=30C. (3) Conditions (a) Ultrasonic Wash 1 minute max. in above solvent at +60C max. (Frequency: 28kHz, Output: 20W/l) (b) Immersion Wash 5 minutes max. in above solvent at +60C max. (c) Shower or Rinse Wash 5 minutes max. in above solvent at +60C max. (4) Drying 5 minutes max. by blowing air at +80C max. (5) Other (a) Total washing time should be within 10 minutes. (b) The component may be damaged if it is washed with chlorine, petroleum, or alkali cleaning solvent. 3. Coating Conformal coating of the component is acceptable. However, the resin material, curing temperature, and other process conditions should be evaluated to confirm stable electrical characteristics are maintained. Continued on the following page. 9 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice for Automotive Continued from the preceding page. Storage and Operating Conditions 1. Product Storage Conditions Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage in a chemical atmosphere. Rating The component may be damaged if excessive mechanical stress is applied. Handling "CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 10 (2) Please do not put the products directly on the floor without anything under them to avoid damp and/or dusty places. (3) Please do not store the products in places such as: in a damp heated place, in a place where direct sunlight comes in, in a place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking of ceramic elements. 4. Other Conformal coating of the component is acceptable. However, the resin material, curing temperature, and other process conditions should be evaluated to confirm that stable electrical characteristics are maintained. Please be sure to consult with our sales representatives or engineers whenever and prior to using the products. P16E.pdf Oct.1,2018 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Packaging for Automotive Minimum Quantity Bulk Reel Dimensions CSTCR_G_B Part Number Plastic Tape o180mm 3,000 Plastic Tape o330mm 9,000 500 a CSTNR_GH5C 3,000 9,000 500 a CSTNE_G_A 3,000 9,000 500 b CSTNE_GH5C 3,000 9,000 500 b CSTNE_V_C 3,000 9,000 500 b CSTNE_VH3C 3,000 9,000 500 b (pcs.) The order quantity should be an integral multiple of the "Minimum Quantity" shown above. Dimensions of Reel a b Trailer 160-190 Leader Empty Components Empty Components Empty 160 min. (o1800 -1.5) (o1800 -1.5) 400-560 o13.00.2 2.00.5 13.0 Leader Cover Film Trailer 160-190 Cover Film +1.0 0 9.0 17.01.0 Empty 160 min. 400-560 o13.00.2 2.00.5 +1.0 0 13.01.0 (in mm) Dimensions of Taping 10 (in mm) Direction of Feed 8.00.2 3.50.05 +0.10 3.40 -0.05 (7) (1.30 max.) (1.85 max.) 0.250.05 1.250.1 Direction of Feed (3)(2)(1) (5.2) +0.2 4.00.1 o1.0 -0.0 +0.10 Cover film peel strength force 0.1 to 0.7N 1.50 -0.05 Cover film peel speed 300mm/min. Cover Film 4.00.1 (5) +0.1 o1.5 -0.0 2.00.05 0.250.05 0.900.10 o1.50.1 2.20.1 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. Cover Film 10 4.00.1 12.00.2 (9.5) (3)(2)(1) 4.70.1 2.00.05 5.50.05 +0.1 o1.5 -0 1.750.1 CSTNE_GH5C 1.750.1 CSTNR_GH5C 4.00.1 (in mm) 8.00.2 +0.10 3.40 -0.05 (3)(2)(1) Direction of Feed 1.100.10 (5) (1.40 max.) +0.2 o1.0 -0.0 +0.10 Cover film peel strength force 0.1 to 0.7N 1.50 -0.05 Cover film peel speed 300mm/min. Cover Film 10 0.250.05 (5.2) 4.00.1 3.50.05 1.750.1 CSTNE_VH3C Dimensions of Carrier Tape 4.00.1 +0.1 o1.5 -0.0 2.00.05 (in mm) Continued on the following page. 11 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Packaging for Automotive Continued from the preceding page. Dimensions of Taping 8.00.2 +0.10 3.40 -0.05 Direction of Feed 1.100.10 (1.40 max.) (5) 0.250.05 (5.2) (3)(2)(1) +0.2 o1.0 -0.0 +0.10 Cover film peel strength force 0.1 to 0.7N 1.50 -0.05 Cover film peel speed 300mm/min. Cover Film 10 12 3.50.05 1.750.1 CSTNE_V_C 4.00.1 (in mm) Direction of Feed 8.00.2 3.50.05 +0.10 3.40 -0.05 10 (in mm) Dimensions of Carrier Tape 4.00.1 +0.1 o1.5 -0.0 2.00.05 (7) (1.30 max.) (1.85 max.) 0.30.05 1.250.05 Direction of Feed (3)(2)(1) (5.2) +0.2 4.00.1 o1.0 -0.0 +0.10 Cover film peel strength force 0.1 to 0.7N 1.50 -0.05 Cover film peel speed 300mm/min. Cover Film 4.00.1 (3) +0.1 o1.5 -0.0 2.00.05 0.250.05 0.900.10 +0.1 o1.5 -0 2.20.1 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. Cover Film 10 4.00.1 12.00.2 (9.5) (3)(2)(1) 4.70.1 2.00.05 5.50.05 +0.1 o1.5 -0 1.750.1 CSTNE_G_A 1.750.1 CSTCR_G_B 4.00.1 (in mm) P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Ceramic Resonators (CERALOCKr) MHz Chip Type -Tight Frequency Tolerance for Consumer/Industrial Usage 2.00.1 0.300.20 Chip type CERALOCKr with built-in load capacitors provides high accuracy in an extremely small package. MURATA's frequency adjustment and packaging technology expertise has enabled the development of the chip CERALOCKr with built-in load capacitors. High-density mounting is made possible by the small package and the elimination of the need for an external load capacitor. * 0.60.05 0.20.2 1.10.1 4.1 max. 0.4 (Ref.) 0.4 (Ref.) 0.4 (Ref.) (3) (2) 0.40.1 (1) 0.40.1 CSTNR_GH5L 4.00-7.99MHz 0.750.1 1. Oscillation circuits do not require external load capacitors. 2. Available for a wide frequency range. 3. Extremely small and have a low profile. 4. No adjustment is necessary for oscillation circuits. 5. Stable supply is ensured due to not using precious metal (Paradium) in built-in Capacitance. 1.50.1 0.40.1 (1): Input (2): GND (3): Output : Frequency Marking * : EIAJ Monthly Code 1.50.1 3 (in mm) * 1.1 max. 1.300.15 0.100.10 3.200.15 0.40.1 0.10.1 3.0 max. Applications 0.700.10 Features 1.4 max. 4.50.1 0.50 (ref.) 0.50 (ref.) 0.50 (ref.) 1. Clock oscillators for USB (full-speed) controller ICs 2. Audio equipment and musical instruments, etc. 3. Other applications for replacement of Crystal units/ Oscillators (3) (2) (1) 0.40.1 0.40.1 0.40.1 (1): Input (2): GND (3): Output : Frequency Marking * : EIAJ Monthly Code CSTNE_GH5L 8.00-13.99MHz 0.40.1 1.20.1 1.20.1 (in mm) * 1.1 max. 1.300.15 0.100.10 3.200.15 0.40.1 0.10.1 0.900.10 3.0 max. 0.50 (ref.) 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 CSTNE_VH3L 14.00-20.00MHz 0.40.1 (1): Input (2): GND (3): Output : Frequency Marking * : EIAJ Monthly Code 1.20.1 1.20.1 (in mm) Frequency (MHz) Initial Frequency Tolerance (%) Frequency Shift by Temperature (%) Operating Temperature Range (C) CSTNR_GH5L 4.00 to 7.99 0.07 0.11 -20 to 85 CSTNE_GH5L 8.00 to 13.99 0.07 0.11 -40 to 85 CSTNE_VH3L 14.00 to 20.00 0.07 0.11 -40 to 85 Part Number Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 13 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Measuring Circuit of Oscillating Frequency CSTNR_GH5L/CSTNE_GH5L/CSTNE_VH3L VDD 5pF To Frequency Counter Rf 1M Rd (1) (3) C1 C2 (2) 3 Standard Land Pattern Dimensions CSTNE_GH5L/CSTNE_VH3L CSTNR_GH5L (* This Land Pattern is not common to CSTCR_G.) 0.4 1.1 0.4 1.1 0.4 0.8 0.4 0.8 0.4 1.9 2.6 0.4 1.2 1.5 1.5 1.2 Land Pattern Land Pattern (in mm) (in mm) Frequency Temperature Characteristics CSTNR_GH5L CSTNE_GH5L +0.2 Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) +0.2 +0.1 +0.1 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 CSTNE_VH3L Oscillating Frequency Shift (%) +0.2 +0.1 0 -0.1 -0.2 -60 14 -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Ceramic Resonators (CERALOCKr) MHz Chip Type -Standard Frequency Tolerance for Consumer/Industrial Usage * (3) 0.20.2 (2) 1.150.05 0.4 (Ref.) 0.4 (Ref.) 0.4 (Ref.) 0.80.1 0.80.1 0.80.1 0.40.1 0.40.1 0.750.1 1. Oscillation circuits do not require external load capacitors. 2. Available in a wide frequency range. 3. Extremely small and have a low profile. 4. No adjustment is necessary for oscillation circuits. 1.50.1 (1): Input (2): GND (3): Output : Frequency Marking * : EIAJ Monthly Code 0.40.1 1.50.1 (in mm) * 1.1 max. 1.300.15 0.100.10 3.200.15 0.700.10 3.0 max. 0.50 (ref.) 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 (1): Input (2): GND (3): Output : Frequency Marking * : EIAJ Monthly Code CSTNE_G 8.00-13.99MHz 0.40.1 1.20.1 1.20.1 (in mm) * 1.1 max. 1.300.15 3.200.15 0.100.10 1. Clock oscillators for microprocessors 2. Small electronic equipment such as handheld phone, digital video camcorder (DVC), digital still camera (DSC), portable audio player, etc. 3. Storage media and memory (HDD, Optical storage device, FDD, Flash memory card, etc.) 4. Office automation equipment (Mobile PC, Mouse, Keyboard, etc.) 5. Audio-visual applications (TV, DVD-HDD recorder, Audio equipment, Remote control, etc.) 6. Home appliances (Air conditioner, Microwave oven, Refrigerator, Washing machine, etc.) 4 0.40.1 0.10.1 Applications 0.40.1 0.10.1 0.50 (ref.) 0.900.10 3.0 max. 0.50 (ref.) 0.50 (ref.) (3) (2) (1) 0.40.1 0.40.1 0.40.1 CSTNE_V 14.00-20.00MHz 0.40.1 Part Number 0.40.05 (1) 4.1 max. CSTCR_G 4.00-7.99MHz Features 2.00.1 0.30.2 Chip type CERALOCKr with built-in load capacitors provides an extremely small package. MURATA's package technology expertise has enabled the development of the Chip CERALOCKr with built-in load capacitors. High-density mounting can be realized because of the small package and the elimination of the need for an external load capacitor. 1.4 max. 4.50.1 (1): Input (2): GND (3): Output : Frequency Marking * : EIAJ Monthly Code 1.20.1 1.20.1 (in mm) Frequency (MHz) Initial Frequency Tolerance (%) Frequency Shift by Temperature (%) Operating Temperature Range (C) CSTCR_G 4.00 to 7.99 0.50 0.20 -20 to 80 CSTNE_G 8.00 to 13.99 0.50 0.20 -40 to 85 CSTNE_V 14.00 to 20.00 0.50 0.30 -40 to 85 Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. 15 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Measuring Circuit of Oscillating Frequency CSTCR_G/CSTNE_G/CSTNE_G_Z/CSTNE_V VDD 5pF To Frequency Counter Rf 1M Rd (1) (3) C1 C2 (2) Standard Land Pattern Dimensions CSTCR_G (* This Land Pattern is not common to CSTNR_GH5C, CSTNR_GH5L.) CSTNE_G/CSTNE_V 0.8 0.7 0.8 0.7 0.8 0.8 0.4 0.8 0.4 2.6 1.6 0.4 1.9 4 0.4 1.5 0.4 1.5 0.4 1.2 1.2 Land Pattern Land Pattern (in mm) (in mm) Frequency Temperature Characteristics CSTCR_G CSTNE_G +0.2 Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) +0.2 +0.1 +0.1 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 CSTNE_V Oscillating Frequency Shift (%) +0.2 +0.1 0 -0.1 -0.2 -60 16 -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 0 -0.1 -0.2 -60 -40 -20 0 +20 +40 +60 Temperature (C) +80 +100 +120 +140 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Ceramic Resonators (CERALOCKr) MHz Lead Type -Standard Frequency Tolerance for Consumer/Industrial Usage 3.50.3 *** (3) (2) Features (1) Frequency (MHz) Part Number T *1 5.51.0 3.50.3 6.50.5 * (2) (1) 2.50.2 2.50.2 Initial Frequency Tolerance (%) Frequency Shift by Temperature (%) o0.480.05 (3) CSTLS_X 16.00-70.00MHz 1. DTMF generators 2. Clock oscillators for microcomputers 3. Remote control units 4. Automated office equipment : Frequency Marking : Vender's Code ***: Weekly Date Code (in mm) 2.50.2 2.50.2 1. Oscillation circuits do not require external load capacitors. There is some variation in built-in capacitance values applicable to various IC. 2. Stable over a wide temperature range. 3. Compact, lightweight and exhibit superior shock resistance performance. 4. Enable the design of oscillator circuits requiring no adjustment. 5. Cost-effective and reliable availability o0.480.05 7.0 (Ref.) CSTLS_G 3.40-10.00MHz Applications 5.50.5 3.01.0 0.7 (Ref.) 8.01.0 MURATA's ceramic resonator, CERALOCKr with built-in load capacitors, has been widely applied as the most suitable component for clock oscillators in a broad range of microprocessors. The CSTLS series can be used in the design of oscillation circuits not requiring external load capacitors, enabling both high-density mounting and cost reduction. T *1 : 3.51.0 (16.00-32.99MHz) 3.01.0 (33.00-70.00MHz) : Frequency Marking * : EIAJ Monthly Code (in mm) 5 Operating Temperature Range (C) CSTLS_G 3.40 to 10.00 0.5 0.2 [-0.4% to +0.2%:Built-in Capacitance 47pF type] -20 to 80 CSTLS_X 16.00 to 70.00 0.5 0.2 -20 to 80 Irregular or stopped oscillation may occur under unmatched circuit conditions. Please check the actual conditions prior to use. The order quantity should be an integral multiple of the "Minimum Quantity" shown on the packaging page. Measuring Circuit of Oscillating Frequency 32-bit Microcomputer VDD To Frequency Counter Rf Rd (1) (3) C1 C2 (2) 17 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf Oct.1,2018 Frequency Temperature Characteristics CSTLS_G CSTLS_X +0.25 0 -40 -0.25 -0.50 5 18 0.3 0 40 80 120 Temperature (C) Oscillating Frequency Shift (%) Oscillating Frequency Shift (%) +0.50 0.2 0.1 0.0 -50 -0.1 -0.2 -0.3 -30 -10 10 30 50 70 90 110 130 Temperature (C) P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Notice for Consumer/Industrial Usage -MHz Chip Type Soldering and Mounting (CSTCR_G/CSTNR_GH5L, CSTNE_G/GH5L, CSTNE_V/VH3L Series) 1. Soldering (1) Reflow soldering Please mount the component on a circuit board by reflow soldering. Flow soldering is not acceptable. Flux Please use rosin based flux, not water soluble flux. Solder Please use solder (Sn-3.0Ag-0.5Cu) under the following conditions: Standard thickness of soldering paste: 0.10 to 0.15mm. Recommendable Soldering Profile Pre-heating 60 to 120s 220C min. 30 to 60s upper limit: 260C 1s max. lower limit: 245C 5s max. Heating Peak Temperature 150 to 180C Temperature (C) Recommendable Flux and Solder Peak 260 245 220 Heating (220C min.) 180 150 Pre-heating (150 to 180C) 60 to 120s Gradual Cooling 30 to 60s Temperature shall be measured on the surface of component. (2) Soldering with Iron If compelled to mount the component by using a soldering iron, please do not directly touch the component with the soldering iron. The component terminals or electrical characteristics may be damaged if excessive thermal stress is applied. Recommendable Soldering with Iron Heating of the soldering iron Watt Shape of the soldering iron Soldering Time Solder 350C max. 30W max. o3mm max. 5s max. at one terminal Sn-3.0Ag-0.5Cu (4) Other Do not reuse components removed from a circuit board after soldering. (5) Conditions for Placement Machines The component is recommended with placement machines that employ optical placement capabilities. The component may be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. (3) Solder Volume Please make the solder volume less than the height of the substrate to avoid damage to the seal between the metal cap and the substrate. 2. Washing / Coating Conformal coating or washing of the component is not acceptable, because it is not hermetically sealed. Please contact us if you need a washable component. Continued on the following page. 19 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Notice for Consumer/Industrial Usage -MHz Chip Type Continued from the preceding page. Storage and Operating Conditions 1. Product Storage Conditions Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage in a chemical atmosphere. Rating The component may be damaged if excessive mechanical stress is applied. Handling "CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 20 (2) Please do not put the products directly on the floor without anything under them to avoid damp and/or dusty places. (3) Please do not store the products in places such as: in a damp heated place, in a place where direct sunlight comes in, in a place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking of ceramic elements. 4. Other Conformal coating or washing of the component is not acceptable because it is not hermetically sealed. Please be sure to consult with our sales representatives or engineers whenever and prior to using the products. P16E.pdf Oct.1,2018 !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. P16E.pdf Oct.1,2018 Notice for Consumer/Industrial Usage -MHz Lead Type Soldering and Mounting (CSTLS_G, CSTLS_X Series) The component cannot withstand washing. Please do not apply excessive mechanical stress to the component and lead terminals during soldering. Storage and Operating Conditions 1. Product Storage Conditions Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the products may be degraded in solderability and/or rusty. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp and/or dusty places. (3) Please do not store the products in places such as: in a damp heated place, in a place where direct sunlight comes in, in a place applying vibrations. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality, and/or be degraded in the solderability due to storage under poor conditions. (5) Please do not drop the products to avoid cracking of ceramic elements. 4. Other Conformal coating or washing of the component is not acceptable because it is not hermetically sealed. Please be sure to consult with our sales representatives or engineers whenever and prior to using the products. Rating The component may be damaged if excessive mechanical stress is applied. Handling "CERALOCK" may stop oscillating or oscillate irregularly under improper circuit conditions. 21 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Packaging for Consumer/Industrial Usage -MHz Chip Type Minimum Quantity Plastic Tape o180mm Plastic Tape o330mm Bulk Reel Dimensions CSTCR_G Part Number 3,000 9,000 500 a CSTNR_GH5L 3,000 9,000 500 a CSTNE_G 3,000 9,000 500 b CSTNE_GH5L 3,000 9,000 500 b CSTNE_V 3,000 9,000 500 b CSTNE_VH3L 3,000 9,000 500 b (pcs.) The order quantity should be an integral multiple of the "Minimum Quantity" shown above. Dimensions of Reel a b Trailer 160-190 Leader Components Empty 160 min. Empty Components o13.00.2 Empty 160 min. 400-560 400-560 (o1800 -1.5) (o1800 -1.5) Empty Leader Cover Film Trailer 160-190 Cover Film 2.00.5 +1.0 o13.00.2 2.00.5 +1.0 13.0 0 9.0 -0 17.01.0 13.01.0 (in mm) Dimensions of Taping 10 (in mm) Direction of Feed 8.00.2 (1.30 max.) 3.50.05 (7) 0.250.05 0.900.10 +0.10 3.40 -0.05 (3)(2)(1) (5.2) 12.00.2 Direction of Feed +0.1 o1.5 -0.0 2.00.05 +0.2 4.00.1 o1.0 -0.0 +0.10 Cover film peel strength force 0.1 to 0.7N 1.50 -0.05 Cover film peel speed 300mm/min. Cover Film (1.85 max.) (5) 0.250.05 o1.50.1 4.00.1 2.20.1 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. Cover Film 10 4.00.1 1.250.1 (9.5) (3)(2)(1) 4.70.1 2.00.05 5.50.05 +0.1 o1.5 -0 1.750.1 CSTNE_GH5L 1.750.1 CSTNR_GH5L 4.00.1 (in mm) 8.00.2 +0.10 3.40 -0.05 (3)(2)(1) +0.2 (5) Direction of Feed 1.100.10 +0.10 (1.40 max.) o1.0 -0.0 Cover film peel strength force 0.1 to 0.7N 1.50 -0.05 Cover film peel speed 300mm/min. Cover Film 10 0.250.05 (5.2) 4.00.1 3.50.05 1.750.1 CSTNE_VH3L Dimensions of Carrier Tape 4.00.1 +0.1 o1.5 -0.0 2.00.05 (in mm) Continued on the following page. 22 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Packaging for Consumer/Industrial Usage -MHz Chip Type Continued from the preceding page. Dimensions of Taping 10 (in mm) Direction of Feed 8.00.2 3.50.05 +0.10 3.40 -0.05 (7) (1.30 max.) (1.85 max.) 0.30.05 1.250.05 Direction of Feed (3)(2)(1) (5.2) +0.2 4.00.1 o1.0 -0.0 +0.10 Cover film peel strength force 0.1 to 0.7N 1.50 -0.05 Cover film peel speed 300mm/min. Cover Film 4.00.1 (3) +0.1 o1.5 -0.0 2.00.05 0.250.05 0.900.10 +0.1 o1.5 -0 2.20.1 Cover film peel strength force 0.1 to 0.7N Cover film peel speed 300mm/min. Cover Film 10 4.00.1 12.00.2 (9.5) (3)(2)(1) 4.70.1 2.00.05 5.50.05 +0.1 o1.5 -0 1.750.1 CSTNE_G 1.750.1 CSTCR_G 4.00.1 (in mm) 8.00.2 +0.10 3.40 -0.05 (3)(2)(1) Direction of Feed 1.100.10 (5) (1.40 max.) +0.2 o1.0 -0.0 +0.10 Cover film peel strength force 0.1 to 0.7N 1.50 -0.05 Cover film peel speed 300mm/min. Cover Film 10 0.250.05 (5.2) 4.00.1 3.50.05 1.750.1 CSTNE_V Dimensions of Carrier Tape 4.00.1 +0.1 o1.5 -0.0 2.00.05 (in mm) 23 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Packaging for Consumer/Industrial Usage -MHz Lead Type Minimum Quantity Ammo Pack Bulk CSTLS_G (3.40 to 10.0MHz) Part Number 2,000 500 CSTLS_X (16.00 to 70.00MHz) 2,000 500 (pcs.) The order quantity should be an integral multiple of the "Minimum Quantity" shown above. Tape Dimensions of CSTLS_G P2 P dh dh dS D M* * * A W2 d W1 W0 W L1 H0 H1 M* * * D0 P1 F1 F2 P0 Item t Direction of Feed Code Dimensions Tolerance Width of diameter D 8.0 1.0 Height of resonator A 5.5 0.5 Dimensions of terminal d o0.48 Lead length under the hold down tape L1 5.0 min. Pitch of component P 12.7 0.5 Pitch of sprocket hole P0 12.7 0.2 Length from sprocket hole center to lead P1 3.85 0.5 Length from sprocket hole center to component center P2 6.35 0.5 Lead spacing (I) F1 2.5 0.2 Lead spacing (II) F2 2.5 0.2 Slant forward or backward dh 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 Gap of hold down tape and carrier tape W2 0 0.5 +0.5 -0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Total height of resonator H1 23.5 1.0 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 0 1.0 Total tape thickness Body tilt dS Remarks 0.05 - - Tolerance for Pitches 10xP0=1271 1mm max. Hold down tape does not exceed the carrier tape. (in mm) Continued on the following page. 24 P16E.pdf !Note * Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. * This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. Oct.1,2018 Packaging for Consumer/Industrial Usage -MHz Lead Type Continued from the preceding page. Tape Dimensions of CSTLS_X P P2 dS H0 W0 W1 W L1 d H1 W2 A D dh dh D0 P1 F1 F2 Direction of Feed P0 Item t Code Dimensions Tolerance Width of diameter D 5.5 1.0 Height of resonator A 6.5 Dimensions of terminal d o0.48 Lead length under the hold down tape L1 5.0 min. Pitch of component P 12.7 0.5 Pitch of sprocket hole P0 12.7 0.2 Length from sprocket hole center to lead P1 3.85 0.5 Length from sprocket hole center to component center P2 6.35 0.5 Lead spacing (I) F1 2.5 0.2 Lead spacing (II) F2 2.5 0.2 Slant forward or backward dh 0 1.0 Width of carrier tape W 18.0 0.5 Width of hold down tape W0 6.0 min. Position of sprocket hole W1 9.0 Gap of hold down tape and carrier tape W2 0 0.5 +0.5 -0.0 Distance between the center of sprocket hole and lead stopper H0 18.0 0.5 Total height of resonator H1 24.5 1.0 Diameter of sprocket hole D0 o4.0 0.2 t 0.6 0.2 0 1.0 Total tape thickness Body tilt dS Remarks 0.5 0.05 - - Tolerance for Pitches 10xP0=1271 1mm max. Hold down tape does not exceed the carrier tape. (in mm) 25 P16E.pdf Oct.1,2018 Cat. No. P16E-27 Global Locations For details please visit www.murata.com Note 1 Export Control For customers outside Japan: No Murata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or otherwise contribution to (1) any weapons (Weapons of Mass Destruction [nuclear, chemical or biological weapons or missiles] or conventional weapons) or (2) goods or systems specially designed or intended for military end-use or utilization by military end-users. For customers in Japan: For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. 2 Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. 1 Aircraft equipment 2 Aerospace equipment 3 Undersea equipment 4 Power plant equipment 5 Medical equipment 6 Transportation equipment (vehicles, trains, ships, etc.) 7 Traffic signal equipment 8 Disaster prevention / crime prevention equipment 9 Data-processing equipment 10 Application of similar complexity and/or reliability requirements to the applications listed above Murata Manufacturing Co., Ltd. www.murata.com 3 Product specifications in this catalog are as of October 2018. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4 Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5 This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6 Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7 No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Murata: CSTCC7M37G53-R0 CSTCE8M00G55-R0 CSTCC4M91G53-R0 CSTCR4M19G53-R0 CSTCE10M0G55A-R0 CSTLS3M58G53-B0 CSTCE20M0V53-R0 CSTCV16M0X54J-R0 CSTCV20M0X53J-R0 CSTLS8M00G53-B0 CSTLS8M46G53-B0 CSTLS8M00G53-A0 CSTCE20M0V53A-R0 CSTCE10M0G52-R0 CSTCE16M0V53-R0 CSTCR4M00G53A-R0 CSTLS5M00G53-B0 CSTLA16M0X55-B0 CSTLA4M00G55AH0-A3 CSTCR4M19G53A-R0 CSTCC4M00G33A-R0 CSTLS10M0G53-B0 CSTLS6M00G53-B0 CSTLS4M00G53-B0 CSTLS32M0X51-B0 CSTCV20M0X51Q-R0 CSTCE12M0G55A-R0 CSTCR4M91G53-R0 CSTCC8M00G53A-R0 CSTCW24M0X53-R0 CSTLS16M0X55Z-A0 CSTCE10M0G52A-R0 CSTCW27M0X51-R0 CSTCR7M20G53-R0 CSTCR7M37G53-R0 CSTCR7M50G53-R0 CSTCR6M00G55-R0 CSTCR6M00G53-R0 CSTCR4M00G53-R0 CSTCR5M00G53-R0 CSTCE10M0G15A07-R0 CSTCC2M00G53A-R0 CSTLS4M00G53-A0 CSTLS4M91G53-B0 CSTCW40M0X51-R0 CSACW24M0X53-R0 CSTCC10M0G53A-R0 CSTCC2M10G56-R0 CSTCC2M45G53-R0 CSTCC2M45G56-R0 CSTCC3.84MGA-TC CSTCC3M93G53-R0 CSTCC4M91G56A-R0 CSTCC5M00G53-R0 CSTCE10M0G55Z-R0 CSTCE16M0V53ZW-R0 CSTCE20M0V53Z-R0 CSTCE20M0V53ZW-R0 CSTCE8M00G52A-R0 CSTCE8M00G52-R0 CSTCR4M00G53ZW-R0 CSTCR4M00G55A-R0 CSTCR4M91G23-R0 CSTCR6M75G53-R0 CSTCR7M20G53A-R0 CSTCR7M37G53A-R0 CSTCS8.00MT-TC CSTCV14M7X54J-R0 CSTCV19M6X53J-R0 CSTCW70M0X51-R0 CSTLF12M0T55-B0 CSTLF2M00G55-A0 CSTLF2M45G58-B0 CSTLS10M0G53-A0 CSTLS4M08G53-B0 CSTLS4M09G56A-A0 CSTLS8M00G56-B0 CSTCE14M7V53-R0 CSTCE9M83G52-R0 CSTLF4M00G55-A0 CSTCV24M0X53J-R0 CSTCE11M0G15002-R0 CSTCR7M99G53-R0 CSACV16M0X55J-R0 CSTCE14M3V53-R0 CSTCE14M7V53W-R0 CSTCC8M00G56-R0 CSTCC9M00G53-R0 CSTCE12M0G55W-R0 CSTCE20M0V51-R0 CSTCG20M0V51-R0 CSTCG20M0V51W-R0 CSTLS3M58G56-B0 CSTCE1630V53-R0 CSTLS3M58G53-A0 CSTLS4M00G56-A0 CSTLS4M91G56-B0 CSTCC2M40G53Z-R0 CSTLS7M68G53-A0 CSTCR5M00G55-R0