SPECIFICATION CONTROL DRAWING
THERMOFIT
DEVICES Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE: SOLDERSLEEVE* DEVICE
SHIELD TERMINATION WITH BRAID
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: S03-06/10-R-100
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D990389 REPLACES:
S03XXR1
DRAWN BY:
M. FORONDA DATE:
12-MAY-99 PROD. REV.
SEE TABLE DOC ISSUE:
1 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revision Component Dimensions Shall Accommodate Cable Dimensions
Product
Name Ident.
Code L±1.75
(L±0.07) øB
min øC
min H
min øE
max øF
min øD
max
S03-06-R-100 A S0306R 16.5
(0.650) 1.90
(0.070) 2.65
(0.105) 8.25
(0.325) 2.65
(0.105) 0.90
(0.035) 1.9
(0.075)
S03-07-R-100 A S0307R 16.5
(0.650) 2.65
(0.105) 3.68
(0.145) 8.25
(0.325) 3.68
(0.145) 1.40
(0.055) 2.65
(0.105)
S03-08-R-100 A S0308R 16.5
(0.650) 4.30
(0.170) 5.08
(0.200) 8.25
(0.325) 5.08
(0.200) 2.15
(0.085) 4.30
(0.170)
S03-09-R-100 A S0309R 19.1
(0.750) 5.95
(0.235) 6.45
(0.255) 8.25
(0.325) 6.45
(0.255) 3.30
(0.130) 5.95
(0.235)
S03-10-R-100 A S0310R 19.1
(0.750) 7.00
(0.275) 7.6
(0.300) 8.25
(0.325) 7.6
(0.300) 4.30
(0.170) 7.00
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Color change violet to colorless.
3. MELTABLE RINGS: Stabilized thermoplastic. Color: blue.
4. PRE-INSTALLED BRAID: Nickel plated copper strands. CMA 654.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 125°C minimum, meeting
the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material.
For compatible insulations, see SAE-AS83519/2 or consult Raychem.
2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification
RT-1404 and SAE-AS83519/2 which do not require electrical testing while parts are immersed in water.
3. Temperature range: -55°C to +175°C.
4. Parts shall be marked with identification code per table.
For best results, prepare
the cable as shown:
* A trademark of Raychem Corpor ation.
