Programmable Clock OSC SG-8018CG SG-8018CG 33.333300 MHz TJHPA Product name Product Number / Ordering code X1G0056010057xx Please refer to the 8.Packing information about xx (last 2 digits) Output waveform CMOS Pb free / Complies with EU RoHS directive Reference weight Typ. 13 mg 1.Absolute maximum ratings Parameter Maximum supply voltage Storage temperature Input voltage Symbol Min. Typ. Max. Unit Vcc-GND -0.3 - +4.0 V T_stg -40 - +125 C Vin GND-0.5 - Vcc+0.3 V 2.Specifications(characteristics) Parameter Symbol Conditions / Remarks Stored as bare product after unpacking ST or OE terminal Min. Typ. Max. Unit f0 Vcc T_use f_tol Icc I_std I_dis SYM VOH VOL L_CMOS VIH VIL 1.62 -40 -50 45 90%Vcc 70%Vcc - 33.333300 - 3.63 +105 +50 4.4 3.5 55 10%Vcc 15 30%Vcc MHz V C x10-6 mA A mA % V V pF V V Rise time tr - - 6 ns 20% to 80%Vcc,L_CMOS=15pF Fall time tf - - 6 ns 20% to 80%Vcc,L_CMOS=15pF Disable time t_stp - - 1 s Enable time t_sta - - 1 s Measured from the time OE or ST pin crosses 30%Vcc Measured from the time OE pin crosses 70%Vcc Resum time t_res - - - ms Start-up time t_str - - 3 f_age - - - Output frequency Supply voltage Operating temperature Frequency tolerance Current consumption Stand-by current Disable current Symmetry Output voltage Output load condition Input voltage Frequency aging 1 Page Conditions / Remarks Typ. 1.8V / 2.5V / 3.3V - T_use : -40 to +105 Vcc=3.3V Typ., No load Vcc=3.3V Typ., OE=GND 50%Vcc, L_CMOS=<15pF CMOS Load OE Terminal OE Terminal - Measured from the time Vcc reaches its rated minimum value, 1.62V Included in Frequency tolerance x10-6/Year 10 years ms 3.Timing chart tr tf VCC 80 %VCC 50 %VCC 20 %VCC GND tw t 4.Test circuit 1) Waveform observation 2) Current consumption * Current consumption under the disable function should be OE = GND Current consumption under the standby function should be ST = GND. 3) Measurement conditions (1) L_CMOS includes probe capacitance. (2) Mount a by-pass capacitor (approx. 0.01 to 0.1 F) near the mains terminals of the oscillator (between Vcc and GND) 2 Page 5.External dimensions (Unit: mm) 6.Footprint(Recommended) In order to achieve optimum jitter performance, the 0.1 F capacitor between VCC and GND should be placed. It is also recommended that the capacitors are placed on the device side of the PCB, as close to the device as possible and connected together with short wiring pattern. OE Pin = "H" : Specified frequency output. OE Pin = "L" : Output is low level (weak pull - down) ST Pin = "H" : Specified frequency output. ST Pin = "L" : Output is low level (weak pull - down), oscillation stops. 7.Reflow profile Reflow condition (Follow of JEDEC STD-020D.1) Temperature [ C] 300 TP: +260C OVER +255C tp: at least 30 s 250 200 TL: +217C Ts max: +200C Ramp-up rate +3 C/s Max. Ramp-down rate -6 C/s Max. tL 60 s to 150 s ( +217 C over ) Ts min: 150 ts +150 C 60 s to 120 s ( +150C to +200C) 100 50 Time: +25 C to Peak 0 60 120 180 240 300 360 420 480 540 600 660 720 780 Time [ s ] 8.Packing information [ 1 ]Product number last 2 digits code(xx) description The recommended code is "00" X1G0056010057xx Code 01 11 12 (Unit: mm) Condition Any Q'ty vinyl bag(Tape cut) Any Q'ty / Reel 250pcs / Reel Code 14 15 00 3 Page Condition 1000pcs / Reel 2000pcs / Reel 3000pcs / Reel [ 2 ] Taping specification Subject to EIA-481 & IEC-60286 (1) Tape dimensions Material of the Carrier Tape : PS Material of the Top Tape : PET A Unit: mm B User direction of feed D Carrier tape E EPSON EPSON Top tape C Symbol Value A 1.5 B 4.0 C 4.0 D 5.25 E 8.0 F F 1.15 (2) Reel dimensions Material of the Reel : PS 11.41.0 180+0-3.0 60+1-0 90.3 20.5 130.2 10 6-R0.5 210.8 Form and Size of reel window shows are one of the example 4 Page 9.Notice * This material is subject to change without notice. * Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Seiko Epson. * The information about applied data,circuitry, software, usage, etc. written in this material is intended for reference only. Seiko Epson does not assume any liability for the occurrence of customer damage or infringing on any patent or copyright of a third party. This material does not authorize the licensing for any patent or intellectual copyrights. * When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. * You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party who may use the products for such prohibited purposes. * These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high reliability, such as the applications stated below, you must obtain permission from Seiko Epson in advance. / Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment / Traffic control equipment / And others requiring equivalent reliability. 10.Contact us http://www5.epsondevice.com/en/contact/ 5 Page