Your Contact for Relays
PRINTED CIRCUIT BOARD RELAYS
1 TO 30 AMPERES
SECTION 7
PRINTED CIRCUIT BOARD RELAYS
9A
90
PAGE 5 - 6
L W H
1.30 x 1.08 x 0.805 L W H
1.27 x 1.08 x 1.10
UL Recognized
File No. E43641
C US
EPOXY SEALED IMMERSION
CLEANABLE
STANDARD 0.1 GRID PATTERN
CLASS "B" OR "F" INSULATION
SYSTEM
MEETS UL 508 & UL 873 SPACING
SPST-NO. & SPDT
SILVER CADMIUM OXIDE
SPST-NO:
30AMP, 240 VAC, 20AMP, 30 VDC
SPDT:
20 AMP, 250 VAC (NO),
15 AMP, 240 VAC (NC),
10AMP, 30 VDC
5, 12, 24 & 110 VDC
-
2.8 WATTS MAX.
- 55˚C TO +105˚C
- 55˚C TO +130˚C
1500 V rms
100,000 OPERATIONS
10,000,000 OPERATIONS
UL Recognized
File No. E13224
C US
EPOXY SEALED IMMERSION
CLEANABLE WITH TAPE SEAL
CLASS "F" INSULATION SYSTEM
SPADE TERMINALS ACCEPT
INSULATED 1/4" QUICK CONNECT
TERMINALS & 3/16'" COIL
QUICK CONNECT TERMINALS
SEE SECTION 1 FOR FLANGE MOUNT
STYLE WITH 1/4” & 3/16” QUICK CONNECT
TERMINALS
SPST-NO. & SPDT
SILVER CADMIUM OXIDE
SPST-NO:
30AMP, 240 VAC, 20AMP, 28 VDC
SPDT:
30 AMP, 240 VAC, 20AMP, 28 VDC (NO),
15AMP, 240 VAC,10AMP, 28 VDC (NC),
5, 12, 24, 48 & 110 VDC
0.95 VA
2.8 WATTS MAX
- 55˚C TO +85˚C
- 55˚C TO +130˚C
2500 V rms
100,000 OPERATIONS
10,000,000 OPERATIONS
PAGE 7 - 8
GENERAL DATA
AMBIENT TEMPERATURE
OPERATING:
STORAGE:
DIELECTRIC STRENGTH:
(COIL T O FRAME)
LIFE EXPECTANCY
ELECTRICAL:
MECHANICAL:
RELAY SERIES
FEATURES
ONTACT DATA
CONTACT CONFIGURATION:
CONTACT MATERIAL:
MAX. CONTACT RATING:
COIL DATA
STANDARD VOLTAGE
AC:
DC:
NOMINAL COIL POWER
VA: (VAC)
WATTS: (VDC)
INSULATION SYSTEM PER
AGENCY APPROVALS
PAGE NUMBER
LR 700908
1330/1335
UL Recognized
File No. E52197
C US
PAGE 4
L W H
0.905 x 0.728 x 1.275
MINIATURE SIZE
ENCLOSED SEE THRU
COVER WITH
PRINTED CIRCUIT TERMINALS
AC OR DC OPERATION
5 AMP RESISTIVE OR
3 AMP INDUCTIVE SWITCHING
DPDT
SILVER CADMIUM OXIDE
3 AMP, 120 VAC.,
5 AMP, 120 VAC., 30 VDC
24 & 120 VAC
12 & 24 VDC
1.2 VA
1.2 WATTS
- 45˚C TO +70˚C
1500 V rms
100,000 OPERATIONS
AC: 50 ,000,000 &
DC:100,000,000 OPERATIONS
ISO 9002
QS 9000
7...1
PAGE 13 - 14
60
7
UL Recognized
File No. E52197
C US UL Recognized
File No. E52197
C US
PAGE 11 - 12
L W H
0.410 x 0.410 x 0.553 L W H
1.10 x 0.600/0.895 x 0.745
MICRO MINIATURE SIZE
CONFORMS TO FCC PART 68.302,
1500V SURGERESISTANCE, FCC
68.3041000V DIELECTRIC STRENGTH
EXCELLENT R.F. SWITCHING
CHARACTERISTICS
HIGH SHOCK & VIBRATION RESISTANCE
PRINTED CIRCUIT BOARD MOUNTING
ON 0.1 GRID PATTERN
94V-0 PLASTIC, EPOXY SEALED
SPDT & DPDT
GOLD CLAD SILVER
DPDT:
2 AMP, 24 VDC, 0.6AMP, 100 VAC
SPDT:
2 AMP, 120 VAC, 50 uA, 50 mV MIN
2 AMP, 24 VDC
5, 12, & 24 VDC
-
327 MILLIWATTS MAX
- 35˚C TO +70˚C
500 V rms
100,000,000 OPERATIONS
100,000 OPERATIONS
MINIATURE SIZE
CONFORMS TO FCC PART
68.302, 1500V SURGE
RESISTANCE, FCC 68.3041000V
DIELECTRIC STRENGTH
EXCELLENT R.F. SWITCHING
CHARACTERISTICS
HIGH SHOCK & VIBRATION
RESISTANCE
PRINTED CIRCUIT BOARD
MOUNTING ON 0.1 GRID PATTERN
SPDT & DPDT
GOLD CLAD SILVER
DPDT:
2 AMP, 24 VDC, 1 AMP, 100 VAC
SPDT:
2 AMP, 120 VAC 50 uA, 50 mV MIN
5, 12, & 24 VDC
-
327 MILLIWATTS MAX
- 35˚C TO +70˚C
500 V rms
100,000,000 OPERATIONS
100,000 OPERATIONS
PRINTED CIRCUIT BOARD RELAYS
A178
PAGE 15 - 16
L W H
0.750 x 0.611 x 0.630
UL Recognized
File No. E195668
C US
MINIATURE EPOXY SEALED
PRINTED CIRCUIT BOARD
MOUNTING
SWITCHES UP TO 15 AMP
LOADS
CLASS "B" OR "F"
INSULATION SYSTEM
IMMERSION CLEANABLE
DISPLACES APPROXIMA TELY
0.29 CUBIC INCH
SPST
SIL VER ALLOY
12 AMP, 120 VAC, 30 VDC
10 AMP, 150 VAC
3, 5, 12, 24 & 48 VDC
-
0.36 WATTS
- 40˚C TO +70˚C
- 40˚C TO +80˚C
1500 V rms
100,000 OPERATIONS
10,000,000 OPERATIONS
EPOXY SEALED
IMMERSION CLEANABLE
WITH TAPE SEAL
CLASS "F" INSULATION
SYSTEM
SEE SECTION 1 FOR
FLANGE MOUNT STYLE
WITH 1/4” & 3/16” QUICK
CONNECT TERMINALS
DPST-NO. & DPDT
SILVER CADMIUM OXIDE
DPDT-NO:
30A, 277 VAC. 20A, 28 VDC
DPST-NO:
30A, 277 VAC. 20A, 28 VDC
DPDT-NC:
3A, 277 VAC, 28 VDC
24, 120 & 240 VAC
12, 24, 48 & 110 VDC
4 VA
1.7 WATTS
DC: - 40˚C TO +85˚C
AC: - 40˚C TO +65˚C
- 55˚C to +155˚C
4000 V rms
5,000,000 OPERATIONS
100,000 OPERATIONS
92
PAGE 9 - 10
L W H
2.06 x 1.36 x 1.356
UL Recognized
File No. E43641
C US
7...2
GENERAL DATA
AMBIENT TEMPERATURE
OPERATING:
STORAGE:
DIELECTRIC STRENGTH:
(COIL T O FRAME)
LIFE EXPECTANCY
ELECTRICAL:
MECHANICAL:
RELAY SERIES
FEATURES
ONTACT DATA
CONTACT CONFIGURATION:
CONTACT MATERIAL:
MAX. CONTACT RATING:
COIL DATA
STANDARD VOLTAGE
AC:
DC:
NOMINAL COIL POWER
VA: (VAC)
WATTS: (VDC)
INSULATION SYSTEM PER
UL STANDARD 1446
AGENCY APPROVALS
PAGE NUMBER
L W H
1.161 x 0.512 x 1.000
PRINTED CIRCUIT BOARD RELAYS
L W H
0.807 x 0.50 x 0.394
276
PAGE 21 - 22
UL Recognized
File No. E190964
C US
SUBMINIATURE EPOXY SEALED
IMMERSION CLEANABLE
STANDARD 0.1 GRID
PATTERN
SINGLE SIDE STABLE DESIGN
5KV SURGE RESISTANCE
COIL T O FRAME
MEETS 4mm INTERNATIONAL
SPACING COIL TO CONTACT
SPST-NO. & SPDT
SIL VER ALLOY
SPST-NO:
10AMP, 250 VAC/30 VDC
SPDT:
7 AMP, 250 VAC/30 VDC
5, 6, 12, & 24 VDC
-
200 MILLIWATTS
- 40˚C TO +70˚C
2000 V rms
100,000 OPERATIONS
2,000,000 OPERATIONS
976
PAGE 19 - 20
UL Recognized
File No. E191122
C US
EPOXY SEALED IMMERSION
CLEANABLE
MEETS 8 MILLIMETER SPACING
COIL TO CONTACTS
MEETS 4KV DIELECTRIC
WITHSTANDING VOLTAGE
SPDT & DPDT
SILVER CADMIUM OXIDE
SPDT:
20 AMP, 125 VAC, 30 VDC
10AMP, 48 VDC,
16 AMP, 250VAC, 30 VDC
DPDT:
5 AMP, 250 VAC, 30 VDC
24, 120 & 240 VAC
5, 6, 12 & 24 VDC
1.2 VA
0.54 WATTS
- 20˚C TO +55˚C
- 40˚C TO +80˚C
5000 V rms
100,000 OPERATIONS
10,000,000 OPERATIONS
TUV
ISO 9002
QS 9000
49
PAGE 17 - 18
L W H
1.25 x 0.759 x 1.14
DUST COVERED
DISPLACES
APPROXIMATELY
1.1 CUBIC INCH
VARIETY OF MOUNTING
CONFIGURATIONS
TV-5 RATINGS AVAILABLE
SPDT
SILVER CADMIUM OXIDE
SILVER, GOLD PLATED
3 AMP, 120 VAC, 28 VDC
(15 AMP, 150 VAC, 28 VDC)
5 AMP, 120 VAC, 28 VDC
10 AMP, 120/240 VAC, 28 VDC
(15 AMP, 150 VAC, 28 VDC)
3, 5, 6, 12, 24 VDC
-
400 MILLIWATTS
- 55˚C TO +85˚C
- 55˚C TO +130˚C
1500 V rms
100,000 OPERATIONS
50,000,000 OPERATIONS
UL Recognized
File No. E52197
C US
ISO 9002
QS 9000
7...3
DPDT 5 AMPS
GENERAL
GENERAL SPECIFICA
SPECIFICATIONS
TIONS
COIL
Pull-in Voltage:
Dropout Voltage:
Max. Voltage:
Resistance:
Duty:
CONTACTS
Contact Material:
Contact Resistance:
Contact Rating:
TIMING
Operate Time:
Release Time:
DIELECTRIC STRENGTH
Coil to Frame:
Across Open Contacts:
Contact to Frame:
Insulation Resistance:
TEMPERATURE
Ambient Temperature:
LIFE EXPECTANCY
Electrical:
Mechanical:
MISCELLANEOUS
Operating Position:
Insulating Material:
Enclosure:
Weight:
c us
UL Recognized
File No. E52197
STANDARD
PART
NUMBERS
NOMINAL
INPUT
VOLTAGE
NOMINAL
RESISTANCE
(OHMS)
COIL MEASURED @ 25˚C
CONTACT
CONFIGU-
RATION
W1330P-2C-24A
W1330P-2C-120A
W1335P-2C-12D
W1335P-2C-24D
DPDT
DPDT
DPDT
DPDT
24 VAC
120 VAC
12 VDC
24 VDC
245 Ω
5400 Ω
125 Ω
500 Ω
CIRCUIT DIAGRAM
(VIEWED FROM PIN END)
75% of nominal voltage or
less for AC or DC coils
10% min.or more for DC
110%
±10% measured @ 25˚C
Continuous
Silver cadmium oxide, 0.093 Dia. (2.36)
100 milliohms max
UL RATED - 5 Amps @ 120 VAC resistive
NOT UL RATED - 30 VDC resistive,
3 Amp inductive, 1/8 Hp @ 120 VAC
20 mS max
AC, 15 mS max. DC @ nominal voltage
20 mS max.
AC, 15 mS max. DC @ nominal voltage
1500 V rms
500 V rms
1500 V rms
1500 megohms min
-45˚C to +70˚C @ rated operation
100,000 operations @ rated resistive load
AC operated device in excess of
50,000,000 operations
DC operated devices, in excess of
100,000,000 operations
Any
Molded parts are diallyl phthalate for
higher arc resistance
Clear heat resistant polycarbonate
dust cover
24 grams approx.
1.075 MAX.
(27.3) 0.200 MAX.
(5.08)
0.905 MAX.
(23)
0.020 MAX.
(0.5)REF.
1 2 3
4 5 6
7 8 9
10 11
AC OPERATED COILS
DC OPERATED COILS
0.905 REF.
(23)
0.067 DIA.
(1.7) 8 PLACES
0.728 REF.
(18.5)
0.350
(8.9)
0.189
(4.8)
0.197
(5)
0.197
(5)
0.354
(9) 0.551
(14)
0.231
(5.9)
0.157
(4)
0.123
(3.1)
MANUFACTURED UNDER
ISO 9002 & QS 9000
PRINTED CIRCUIT
MOUNTING HOLE LAYOUT
(BOTTOM VIEW)
0.052 TYP.
(1.31)
0.728 MAX.
(18.5)
PHONE: ( 843 ) 393-5778 F AX: ( 843 ) 393-4123 EMAIL: info@magnecraft.com
CLASS
1330 & 1335
PRINTED CIRCUIT BOARD TRANSPARENT ENCLOSED RELAY
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
7...4
SPST-N.O. & SPDT 30 AMPS
GENERAL
GENERAL SPECIFICA
SPECIFICATIONS
TIONS
c us
UL Recognized
File No. E13224
LR 700908
COIL
Pull-in Voltage:
Dropout Voltage:
Resistance:
Coil Power:
Insulation System:
Duty:
CONTACTS
Contact Material:
Contact Resistance:
TIMING
Operate Time:
Release Time:
DIELECTRIC STRENGTH
Contacts to Coil:
Across Open Contacts
Insulation Resistance:
75% of nominal voltage or less
10% of nominal voltage or more
±10% measured @ 25˚C
2.8 watts max
Class "B" (130˚C) or class "F" (155˚C)
Continuous
Silver cadmium oxide
50 milliohms max. initial value
15 mS max. @ nominal voltage
10mS max. @ nominal voltage
1500 V rms
1000 V rms
500 megohms under normal
conditions 100 megohms high
temp, high humidity
TEMPERATURE
Operating:
Storage:
Relative Humidity:
Atmospheric Pressure:
VIBRATION RESISTANCE
Functional:
SHOCK RESISTANCE
Functional:
Mechanical:
LIFE
EXPECTANCY
Electrical:
Mechanical:
MISCELLANEOUS
Operating position:
Enclosure:
Weight:
-55˚C to +105˚C
-55˚C to +130˚C
Up to 93% @ 40˚C
650 to 800 mmHg
10 to 55 Hz @ double amplitude
of 1 mm
10 g's for 11 mS, no contact
opening > 100uS
100 g's
100,000 operations
@ rated resistive load
10,000,000 operations @ no load
Any
94V-0 flammability rating,
epoxy sealed immersion cleanable
27 grams approx
UL CONTACT LOAD RATINGS TABLE
LOAD
RESISTIVE
RESISTIVE
RESISTIVE
INDUCTIVE
RESISTIVE
MOTOR
FLA/LRA
‡
TUNGSTEN
BALLAST
OPERATIONS
100,000
100,000
100,000
6,000
30,000
100,000
1,000
100,000
30,000
30,000
100,000
100,000
25,000
6,000
N.C.
2-10 AMP
15AMP @ 250VAC
10 AMP
6 AMP
1/4 HP
-
1/2 HP
275 VA
10/33
10/33
-
-
TV - 3
3 AMP
CLASS "B" OR "F" INSULATION
EPOXY SEALED. BREAKAWAY
NIB OVER VENT HOLE
(REMOVED AFTER CLEANING).
CLASS 90 PRINTED CIRCUIT BOARD RELAYS
PROVIDE AN INEXPENSIVE MEANS OF
SWITCHING LOADS UP TO 30 AMPS.
DESIGNED PRIMARILY FOR THE APPLIANCE
INDUSTRY AND HVAC MARKETS,
THEY ARE ALSO WELL SUITED FOR LOAD
MANAGEMENT, AUTOMOTIVE AND
OTHER APPLICATIONS.
COMPLIES WITH REQUIREMENTS OF
IEC STANDARDS 947-4-1 AND
947-5-1 LOW VOLTAGE DIRECTIVE
IEC = INTERNATIONAL
ELECTROTECHNICAL COMMISSION
CE TESTING AND EVALUATION
PERFORMED BY THE UNDERWRITERS
LABORA T ORIES AS A THIRD PARTY
PARTICIPANT
*
*
*
LOAD
VOLTAGE
240 VAC
277 VAC
5-30 VDC
277 VAC
125 VAC
125 VAC
240/250VAC
125/240 VDC
125 VAC
240 VAC
277 VAC
125 VAC
250 VAC
277 VAC
SPDT-N.O.
LOAD
30 AMP
20 AMP
20 AMP
12 AMP
1 HP
3/4 HP
2 HP
470 VA
30/96
30/80
20/60
27/82
TV - 3
6 AMP
N.O.
20 AMP
20 AMP
20 AMP
12 AMP
1 HP
3/4 HP
2 HP
470 VA
30/96
30/80
20/60
27/82
TV - 3
6 AMP
SPDT OPERATIONS
100,000
100,000
100,000
6,000
-
-
-
30,000
30,000
30,000
-
-
-
6,000
MANUFACTURED UNDER
ISO 9002 & QS 9000
‡ FLA = Full load Amps, LRA = Locked rotor Amps.
CLASS 90
PRINTED CIRCUIT BOARD HIGH - POWER RELAY
PHONE: ( 843 ) 393-5778 F AX: ( 843 ) 393-4123 EMAIL: info@magnecraft.com
7...5
SPDT
SPST-N.O.
SPST-N.O. & SPDT 30 AMPS
SPDT
SPST-N.O.
WIRING DIAGRAM
(VIEWED FROM PIN END)
1.30
(33)
0.693
(17.6)
0.78
(19.8)
0.96
(24.3)
1.08 MAX.
(27.4)
VENT HOLE NIB
0.150
(3.8)
0.830 MAX.
(21.08)
NOT USED ON
CLASS “F”
STYLES
0.700
(17.8)
0.550
(13.9)
0.350
(8.9)
0.150
(3.8)
A B A B A
DRILL “A” HOLES 0.086
DRILL “B” HOLES 0.046
0.600
(15.2)
0.100
(2.54) 0.400
(10.1)
0.500
(12.7)
0.031 X 0.062
(0.8 X1.6)
0.045 X0.045
(1.1 X 1.1)
0.025 X 0.025
(0.64 X 0.64)
0.100
(2.54)
0.208 MAX.
(5.28)
PIN
REMOVED ON
CLASS “F”
STYLES STAND OFF
(QTY. 5)
STANDARD
PART
NUMBERS
NOMINAL
INPUT
VOLTAGE
NOMINAL
RESISTANCE
(OHMS)
COIL MEASURED @ 25˚C
CONTACT
CONFIGU-
RATION
SPST-NO
SPST-NO
SPST-NO
SPST-NO
SPDT
SPDT
SPDT
SPDT
SPST-NO
SPST-NO
SPST-NO
SPST-NO
SPDT
SPDT
SPDT
SPDT
W90S1D12-5
W90S1D12-12
W90S1D12-24
W90S1D12-110
W90S5D12-5
W90S5D12-12
W90S5D12-24
W90S5D12-110
W90S1D42-5
W90S1D42-12
W90S1D42-24
W90S1D42-110
W90S5D42-5
W90S5D42-12
W90S5D42-24
W90S5D42-110
5 VDC
12 VDC
24 VDC
110 VDC
5 VDC
12 VDC
24 VDC
110 VDC
5 VDC
12 VDC
24 VDC
110 VDC
5 VDC
12 VDC
24 VDC
110 VDC
27 Ω
155 Ω
660 Ω
13,450 Ω
27 Ω
155 Ω
660 Ω
13,450 Ω
27 Ω
155 Ω
660 Ω
13,450 Ω
27 Ω
155 Ω
660 Ω
13,450 Ω
CLASS “B” INSULATION, FIG. “A”, 30 AMP
CLASS “F” INSULATION, FIG. “C”, 30 AMP
CLASS “F” INSULATION, FIG. “D”, 20 AMP
FIG. A FIG. C
FIG. B FIG. D
CLASS “B” INSULATION, FIG. “B”, 20 AMP
PRINTED CIRCUIT
MOUNTING HOLE LAYOUT
( BOTTOM VIEW )
CLASS 90
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
PRINTED CIRCUIT BOARD HIGH - POWER RELAY
7...6
SPST-N.O. & SPDT 30 AMPS
GENERAL
GENERAL SPECIFICA
SPECIFICATIONS
TIONS
c us
UL Recognized
File No. E43641
COIL
Pull-in Voltage:
Dropout Voltage:
Max. Coil Voltage:
Power Consumption:
Insulation System:
Resistance:
Duty:
CONTACT
Contact Material:
Switching Voltage:
Contact Resistance:
Minimum Load:
TIMING
Operate Time:
Release Time:
DIELECTRIC STRENGTH
Contacts to Coil:
Between Open Contacts:
Insulation Resistance:
80% of nominal voltage or less for
AC coils
75% of nominal voltage or less for
DC coils
10% of nominal voltage or more
120% max.
AC coil: 0.95 VA, DC coil: 2.8 watts max.
Class "F"(155˚C)
±10% measured @ 25˚C
Continuous
Silver cadmium oxide
277 VAC, 28 VDC max.
75 milliohms @ 1 Amp rated current
1 A, 5 VDC, 12 VAC
DC:15 mS typ. Including bounce
DC:15mS typ. Including bounce
2500 V rms
1500 V rms
1000 mΩ min. @ 500 VDC,
25˚C 50% Rh
TEMPERATURE
Operating:
Storage:
VIBRATION RESISTANCE
Functional:
SHOCK RESISTANCE
Functional:
Mechanical:
LIFE EXPECTANCY
Electrical:
Mechanical:
MISCELLANEOUS
Operating Position:
Enclosure:
Enclosure:
Terminals:
Weight:
-55˚C to +85˚C
-55˚C to +130˚C
10 to 55Hz 1.65 mm max.
No contact opening > 100 uS
10 g's for 11 mS,
no contact opening > 100 µS
100 g's
100,000 operations
@ rated resistive load
10,000,000 operations @ no load
Any
Epoxy sealed immersion cleanable
suitable for automatic circuit board
processing. Max. Exposure soldering
temperature is 4 sec. @ 500˚F.
94V-O flammability rating
1/4" quick connect & safety wells accept
insulated female quick connect terminals
33 grams approx
CLASS "F" INSULATION.
EPOXY SEALED WITH REMOVABLE
TAPE SEAL OVER VENT HOLE
(REMOVED AFTER CLEANING)
MEETS UL 508, UL 873 AND
UL 1950 - 1/8" THRU AIR - 1/4"
OVER SURFACE (SEE NOTES)
CLASS9A
PRINTED CIRCUIT INPUT/QUICK CONNECT OUTPUT POWER RELA
Y
UL CONTACT LOAD RATINGS TABLE
‡ FLA = Full load amps, LRA = Locked rotor amps.
LOAD
GENERAL PURPOSE
RESISTIVE
MOTOR
FLA/LRA ‡
TUNGSTEN
BALLAST
PILOT DUTY
LOAD
VOLTAGE
240 VAC
28 VDC
125 VAC
240 VAC
120 VAC
240 VAC
240 VAC
277 VAC
240 VAC
30AMP
30AMP
1 HP
2 HP
22/98AMP
30/80AMP
TV - 5
10AMP
470 VAC
OPERA-
TIONS
100,000
100,000
1,000
6,000
100,000
30,000
25,000
6,000
6,000
N.O. LOAD
30AMP
30AMP
1 HP
2 HP
22/98AMP
30/80AMP
TV - 5
10AMP
470 VAC
15AMP
10AMP
1/4 HP
1/2 HP
-
12/30AMP
-
3AMP
275 VAC
SPST SPDT
N.O.LOAD N.C.LOAD
PHONE: ( 843 ) 393-5778 F AX: ( 843 ) 393-4123 EMAIL: info@magnecraft.com
7...7
WIRING DIAGRAM
(VIEWED FROM PIN END)
1.080 MAX.
(27.43)
SPST-N.O.
SPDT
1.270 MAX.
(32.26)
1.10 MAX.
(27.94)
A1 A1
A1
HOLE “A” = 0.081 ±0.005 DIA.
(2.06 X 0.13)
HOLE “B” = 0.043 ±0.08 DIA.
(1.09 X 0.08)
0.032 X 0.62
(0.81 X 1.57)
0.045 X 0.045
(1.14 X 1.14)
0.025 X 0.025
(0.63 X 0.63)
2 PLACES
0.130 ± 0.020
(3.30 ± 0.51)
com
NO NC
0.25 MAX.
(6.35)
0.14 MAX.
(3.56)
0.300
(7.62)
0.100
(2.54)
0.600
(15.24) 0.500
(12.7)
0.150
(3.81) 0.550
(13.97)
0.700
(17.8)
B
B
A
A
A
STANDARD
PART
NUMBERS
NOMINAL
INPUT
VOLTAGE
NOMINAL
RESISTANCE
(OHMS)
COIL MEASURED @ 25˚C
CONTACT
CONFIGU-
RATION
W9AS1D22-5
W9AS1D22-12
W9AS1D22-24
W9AS1D22-110
W9AS5D22-5
W9AS5D22-12
W9AS5D22-24
W9AS5D22-110
W9AS1A22-24
W9AS1A22-120
W9AS1A22-240
W9AS5A22-24
W9AS5A22-120
W9AS5A22-240
5 VDC
12 VDC
24 VDC
110 VDC
5 VDC
12 VDC
24 VDC
110 VDC
24 VAC
120 VAC
240 VAC
24 VAC
120 VAC
240 VAC
25 Ω
144 Ω
576 Ω
12100 Ω
25 Ω
144 Ω
576 Ω
12100 Ω
PRINTED CIRCUIT MOUNT, 30 AMP
PRINTED CIRCUIT MOUNT, 20 AMP
SPST-NO
SPST-NO
SPST-NO
SPST-NO
SPDT
SPDT
SPDT
SPDT
SPST-NO
SPST-NO
SPST-NO
SPDT
SPDT
SPDT
PRINTED CIRCUIT MOUNT, 30 AMP
PRINTED CIRCUIT MOUNT, 20 AMP
SPST-N.O. & SPDT 30 AMPS
PRINTED CIRCUIT
MOUNTING HOLE LAYOUT
( BOTTOM VIEW )
CLASS9A
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
PRINTED CIRCUIT INPUT/QUICK CONNECT OUTPUT POWER RELAY
7...8
GENERAL
GENERAL SPECIFICA
SPECIFICATIONS
TIONS
c us
UL Recognized
File No. E43641
COIL
Pull-in Voltage:
Dropout Voltage:
Max. Operating Frequency:
Coil Power:
Insulation System:
Coil Resistance:
Duty:
CONTACT
Contact Material:
Contact Load Ratings:
Contact Resistance:
Minimum Load:
TIMING
Operate Time:
Release Time:
DIELECTRIC STRENGTH
Between Open Contacts:
Contacts to Coil:
Insulation Resistance:
AC: 80% of nominal voltage or less
DC: 75% of nominal voltage or less
10% of nominal voltage or more
14 operations per minute
AC coil: 4.0VA, DC coil: 1.7W
Class "F" (155˚C)
±10% measured @ 25˚C
Continuous
Silver cadmium oxide
See:
“UL CONTACT LOAD RATINGS TABLE”
100,000,000 @ initial rated current
(switched)
N.O. 500 mA @ 12 VAC/VDC
N.C. 100 mA @ 6 VAC/VDC
DC:15 mS typ. 25ms W / Bounce
DC: 10mS typ. 25 ms W / Bounce
1500 V rms
4000V rms
103
50% Rh
TEMPERATURE
Operating:
Storage:
VIBRATION RESISTANCE
Functional:
SHOCK RESISTANCE
Functional:
Mechanical:
LIFE EXPECTANCY
Electrical:
Mechanical:
MISCELLANEOUS
Operating Position:
Enclosure:
Flammability:
Weight:
AC coil rectified: -40˚C to +85˚C,
DC: -40˚C to +85˚C
-55˚C to +155˚C
0.065 (1.65 mm) double amplitude
-10 thru 55 Hz
10 g's for 11 mS,
1/2 sign wave pulse with no
contact opening > 100µs
100 g for 11 ms 1/2 sine wave pulse
100,000 operations
@ rated resistive load
5,000,000 operations @ no load
Any
Epoxy sealed immersion cleanable
tape sealed plastic cover
94V-O Flammability rating
86 g approx
UL CONTACT LOAD RATINGS TABLE
CLASS "F" INSULATION. EPOXY SEALED WITH
REMOVABLE TAPE SEAL OVER VENT HOLE
(REMOVED AFTER CLEANING).
RATING
RESISTIVE
LOAD
MOTOR
TUNGSTEN
LRA/FLA*
PILOT DUTY
DPST-N.O. & DPDT
N.O. LOAD
30 AMP
20 AMP
1 HP
3 HP
TV-10
96/22
110/25.3
3 AMP
DPDT
N.C. LOAD
3 A MP
3 A MP
-
-
-
-
-
-
Note: Vent tape must be removed to achieve listed ratings
* FLA = Full load Amps, LRA = Locked rotor Amps.
DPST-N.O. & DPDT 30 AMPS
OPERATIONS
6,000
100,000
1000
1000
25,000
30,000
6,000
120/277 VAC
28 VDC
120 VAC
240 VAC
120 VAC
240 VAC
240 VAC
LOAD
VOLTAGE
MEETS UL 873 AND
UL 508 SPACING - (8MM)
THRU AIR, (9.5 MM)
OVER SURFACE
meg Ω min. @ 500 VDC,
CLASS 92 PRINTED CIRCUIT BOARD POWER RELAY
7...9PHONE: ( 843 ) 393-5778 F AX: ( 843 ) 393-4123 EMAIL: info@magnecraft.com
DPDT
DPST-N.O. & DPDT 30 AMPS
DPST-N.O.
WIRING DIAGRAM
(VIEWED FROM PIN END)
1.00 ±0.010
(25.40)
0.63 ±0.005
(16.00)
STANDARD
PART
NUMBERS
NOMINAL
INPUT
VOLTAGE
NOMINAL
RESISTANCE
(OHMS)
COIL MEASURED @ 25˚C
CONTACT
CONFIGU-
RATION
DPST-NO
DPST-NO
DPST-NO
DPDT
DPDT
DPDT
DPST-NO
DPST-NO
DPST-NO
DPST-NO
DPDT
DPDT
DPDT
DPDT
W92S7A12-24
W92S7A12-120
W92S7A12-240
W92S11A12-24
W92S11A12-120
W92S11A12-240
W92S7D12-12
W92S7D12-24
W92S7D12-48
W92S7D12-110
W92S11D12-12
W92S11D12-24
W92S11D12-48
W92S11D12-110
24 VAC
120 VAC
240 VAC
24 VAC
120 VAC
240 VAC
12 VDC
24 VDC
48 VDC
110 VDC
12 VDC
12 VDC
48 VDC
110 VDC
-
-
-
-
-
-
86 Ω
350 Ω
1,390 Ω
7,255 Ω
86 Ω
350 Ω
1,390 Ω
7,255 Ω
AC OPERATED COIL PRINTED CIRCUIT MOUNT, 30 AMP
DC OPERATED COIL PRINTED CIRCUIT MOUNT, 30 AMP
0.309 ±0.005
(57.85 ±0.13)
0.589±0.005
(14.96 ±0.13) 1.620 TYP
(41.10 ±0.51)
NOTE:
VENT TAPE MUST BE REMOVED
TO ACHIEVE LISTED RATINGS
0.185 TYP.
(4.70)
0.052
(1.32) TYP.
ALL HOLES
0.25 TYP.
(6.35)
0.047 TYP.
(1.19)
0.156 TYP.
(3.96)
1.356 MAX
(34.44)
1.10 MAX
(27.94)
1.04 MAX
(26.42)
0.032 TYP
(0.81)
6
82
4
6
8
7
2
4
3
1010
0.203 TYP.
(5.16)
PRINTED CIRCUIT
MOUNTING HOLE LAYOUT
( BOTTOM VIEW )
0.072
(1.83) TYP.
ALL HOLES
2.06 MAX.
(52.32)
1.00 ± 0.01
(25.4)
0.162
(4.42)
CLASS 92 PRINTED CIRCUIT BOARD POWER RELAY
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
7...10
GENERAL
GENERAL SPECIFICA
SPECIFICATIONS
TIONS
c us
R.F. PERFORMANCE TABLE
UL Recognized
File No. E52197
TEMPERATURE
Operating:
VIBRATION RESISTANCE
Functional:
SHOCK RESISTANCE
Functional
Mechanical:
LIFE EXPECTANCY
Electrical:
Mechanical:
MISCELLANEOUS
Terminal Finish:
Operating Position:
Enclosure:
Weight:
-35˚C to +70˚C
15 g's, 10 to 2000 Hz,
no contact opening > 10 uS max.
contact chatter destructive: 50 g'S.
50g's 6mS half sine
Destructive: 150 g's.
100,000 operations- 2 Amp
24 VDC, 1.0 Amps 120VAC
@ rated resistive load.
100,000,000 operations @ no load
Terminals are solder coated
and epoxy free to provide excellent
solderability. Max. Exposure to
soldering temperature is 5 seconds
@ 250˚C. after cleaning process,
pierce a small hole in cover for
venting.
Any
UL, 94V-O plastic, epoxy sealed.
2.7 g Approx.
80% of nominal voltage or less
10 % of nominal voltage or more
120% of nominal voltage,
duty cycle: 100%.
±10%
327 milliwatts max.,
min sensitivity: 200 milliwatts.
0.75 watts.
Gold clad silver palladium.
SPDT: 50 uA @ 50mV, 2A , 24 VDC,
2A, 120 VAC,
DPDT: 50 uA @ 50mV, 2A, 24 VDC,
0.6A, 100 VAC, initial 50 mΩ
100 milliohms max @ 6 VDC 10 milliamps.
4.0 mS max. @ nominal voltage typ.
5.0 mS max. @ nominal voltage typ.
500 VAC for 1 minute, 1 milliamp max.
leakage, or 600 VAC for 1 second,
1 milliamp leakage.
Meets FCC 68.302 ( 1500V surge )
and 68.304 ( 1000V dielectric ).
500 VDC exceeds 1000 megohms.
COIL
Pull-in Voltage:
Dropout Voltage:
Max. Voltage:
Resistance:
Coil Power:
Max. Coil Dissipation
CONTACTS
Contact Material:
Contact Rating:
Contact Resistance:
TIMING
Operate Time:
Release Time:
DIELECTRIC STRENGTH
All Mutually Insulated Points:
Surge Test:
Insulation Resistance:
SPDT & DPDT
2AMP
FREQUENCY
(MHZ)
10
50
100
200
300
400
500
INSERTION LOSS
(DB)
COMMON TO
N.O. OR N.C. CONTACTS
0.05
0.10
0.30
0.50
0.60
0.65
0.75
VSWR
COMMON TO
N.O. OR N.C. CONTACTS
1.03:1
1.04:1
1.05:1
1.06:1
1.07:1
1.08:1
1.10:1
ISOLATION
(DB)
N.O. OR N.C.
CONTACTS TO COIL
65
50
42
35
31
29
28
* AVAILABLE WITH SPDT OR DPDT BIFURCATED GOLD CLAD
SILVER-PALLADIUM CROSS BAR CONTACTS- RATED FOR
LOW LEVEL TO 2.0 AMP SWITCHING.
* REQUIRES ONLY .155 SQUARE INCH OF CIRCUIT BOARD SPACE.
* TOTAL VOLUME OF LESS THAN A CUBIC CENTIMETER.
* CONFORMS TO FCC PART 68.302. 1500 V PEAK SURGE
RESISTANCE.
* CONFORMS TO FCC PART 68.304. 1000 V DIELECTRIC
WITHSTANDING VOLTAGE.
THE CLASS 7 SUBMINIATURE HIGH
RELIABILITY INDUSTRIAL GRADE
RELAY HAS EXCELLENT R.F.
SWITCHING CHARACTERISTICS.
CLASS 7PRINTED CIRCUIT BOARD SUBMINIATURE RELAY
7...11 PHONE: ( 843 ) 393-5778 F AX: ( 843 ) 393-4123 EMAIL: info@magnecraft.com
WIRING DIAGRAM
(VIEWED FROM PIN END)
STANDARD
PART
NUMBERS
NOMINAL
INPUT
VOLTAGE
NOMINAL
RESISTANCE
(OHMS)
COIL MEASURED @ 25˚C
CONTACT
CONFIGU-
RATION
DPDT SPDT
0.100 TYP.
(2.54)
0.024 X 0.012
(0.6 X 0.3)
0.410 MAX.
(10.4)
W7PCX-1
W7PCX-3
W7PCX-4
W7PCX-5
W7PCX-7
W7PCX-8
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
COIL POWER CONSUMPTION
50˚
70˚
80˚
40˚
30˚
20˚
0˚
10˚
TEMP. RISE C˚
SPDT
SPDT
SPDT
DPDT
DPDT
DPDT
5 VDC
12 VDC
24 VDC
5 VDC
12 VDC
24 VDC
75 Ω
440 Ω
1550 Ω
75 Ω
440 Ω
1550 Ω
0.410 MAX.
(10.4)
0.428 MAX.
(10.9)
0.125
(3.18)
PIERCE THRU
VENT HOLE
0.300 MAX.
(7.62)
0.100
(2.54)
OPERATE / RELEASE TIME
MILLISECONDS
TOP VIEW SHOWN AT
ACTUAL SIZE ON 0.1 GRID
SIZE COMPARISON OF
STANDARD I. C.
TO CLASS 7 RELAYS
I.C.
CLASS
7CLASS
7
CLASS
7
After cleaning process,
pierce 0.40 (1mm) hole in cover
for venting.
THE CLASS 7 RELAYS CAN BE DENSELY PACKED
TOGETHER WITHOUT MAGNETIC INTERACTION
FROM ADJACENT RELAYS.
COIL VOLTAGE
COIL RESISTANCE VALUE AFTER TEMP. WAS RAISED
COIL VOLTAGE
AT 20˚C COIL RESISTANCE VALUE
E
Rt
2
E
R
2
20
=
=
SPDT & DPDT
2 AMP
PRINTED CIRCUIT
MOUNTING HOLE LAYOUT
( BOTTOM VIEW )
E
Rt
E
R
2
2
20
COIL TEMPERATURE RISE
0.3 0.4 0.5 0.6 0.7 0.8 0.9
COIL APPLIED POWER (WATTS)
OPERATE TIME
RELEASE TIME
4
3
2
1
0
CLASS 7PRINTED CIRCUIT BOARD SUBMINIATURE RELAY
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
7...12
GENERAL
GENERAL SPECIFICA
SPECIFICATIONS
TIONS
c us
UL Recognized
File No. E52197
TEMPERATURE
Operating:
VIBRATION RESISTANCE
Functional:
SHOCK RESISTANCE
Functional:
Mechanical:
LIFE EXPECTANCY
Electrical:
Mechanical:
MISCELLANEOUS
Terminal Finish:
Operating Position:
Enclosure:
Weight:
-35˚C to +70˚C
15g's, 10 to 2000 Hz,
no contact opening
greater than 10µS
50g's, 6mS max.
Contact chatter
destructive 50g's.
100,000 operations
@ rated rssistive load.
100,000,000 operations @ no load
Terminals are solder coated to
provide excellent solderability.
max. exposure to soldering
temperature is 5 seconds
@ 250˚C.
Any
Plastic.
SPDT-5.5 g, DPDT- 9 g Approx.
80% of nominal voltage or less
10% of nominal voltage or more
120% of nominal voltage,
duty cycle 100%
±10% measured @ 25˚C 327mW max.
Min. sensitivity: 200 mW
0.75 watt
Gold clad silver palladium.
Low level: 50uA- 50mV,
SPDT: 2 A-24 VDC, 2A-120 VAC,
DPDT: 2 A-24 VDC, 0.6A-100 VAC,
Initial 50 milliohms @ 6 VDC,
10mA, 100 milliohms max.
4.0 mS max. @ nominal voltage.
10.0 mS max. @ nominal voltage.
2.5 mS operate, 5.0 mS release
500 VAC for 1 minute, 1 milliamp max.
leakage, or 600 VAC for 1 second,
1 milliamp leakage.
Meets FCC 68.302 ( 1500V surge )
and 68.304 ( 1000V dielectric ).
500 VDC exceeds 1000 megohms.
COIL
Pull-in Voltage:
Dropout Voltage:
Max. Voltage:
Resistance:
Coil Power:
Max. Coil Dissipation:
CONTACTS
Contact Material:
Contact Rating:
Contact Resistance:
TIMING
Operate Time:
Release Time:
Contact Bounce:
DIELECTRIC STRENGTH
All Mutually Insulated Points:
Surge Test:
Insulation Resistance:
SPDT & DPDT
2 AMP
R.F. PERFORMANCE TABLE
FREQUENCY
(MHZ)
10
50
100
200
300
400
500
INSERTION LOSS
(DB)
COMMON TO
N.O. OR N.C. CONTACTS
0.05
0.10
0.30
0.50
0.60
0.65
0.75
VSWR
COMMON TO
N.O. OR N.C. CONTACTS
1.03:1
1.04:1
1.05:1
1.06:1
1.07:1
1.08:1
1.10:1
ISOLATION
(DB)
N.O. OR N.C.
CONTACTS TO COIL
65
50
42
35
31
29
28
* AVAILABLE WITH SPDT OR DPDT BIFURCATED GOLD CLAD
SILVER-PALLADIUM CROSS BAR CONTACTS- RATED FOR
LOW LEVEL TO 2.0 AMP SWITCHING.
* REQUIRES ONLY O.155 SQUARE INCH OF CIRCUIT BOARD SPACE.
* TOTAL VOLUME OF LESS THAN A CUBIC CENTIMETER.
* CONFORMS TO FCC PART 68.302. 1500 V PEAK SURGE
RESISTANCE.
* CONFORMS TO FCC PART 68.304. 1000 V DIELECTRIC
WITHSTANDING VOLTAGE.
CLASS 60 PRINTED CIRCUIT BOARD MINIATURE RELAY
7...13 PHONE: ( 843 ) 393-5778 F AX: ( 843 ) 393-4123 EMAIL: info@magnecraft.com
CIRCUIT DIAGRAMS
(BOTTOM VIEW)
STANDARD
PART
NUMBERS
NOMINAL
INPUT
VOLTAGE
NOMINAL
RESISTANCE
(OHMS)
COIL MEASURED @ 25˚C
CONTACT
CONFIGU-
RATION
SPDT
SPDT
SPDT
SPDT
DPDT
DPDT
DPDT
DPDT
1.10 MAX.
(27.9)
0.570 MAX.
(14.4)
0.175 MAX.
(4.45)
0.010
(0.25)
0.025 SQ. PINS
(0.64)
SPDT
5 VDC
12 VDC
24 VDC
48 VDC
5 VDC
12 VDC
24 VDC
48 VDC
W60HE1S-5DC
W60HE1S-12DC
W60HE1S-24DC
W60HE1S-48DC
W60HE2S-5DC
W60HE2S-12DC
W60HE2S-24DC
W60HE2S-48DC
75
440
1550
5250
75
440
1550
5250
Ω
1.10 MAX.
(27.9)
0.570 MAX.
(14.4)
0.175 MAX.
(4.45)
0.010
(0.25)
0.025 SQ. PINS
(0.64)
FIGURE
“B”
FIGURE
“A”
0.600 MAX.
(15.2)
0.092 MAX.
(2.34)
0.895 MAX.
(22.7)
0.105 MAX.
(2.67)
DPDT
0.040 DIA
(1.01) TYP. W60HE1S
0.040 DIA
(1.01) TYP. W60HE2S FIG. A
FIG. B
SPDT & DPDT
2 AMP
PRINTED CIRCUIT
MOUNTING HOLE LAYOUT
(TOP VIEW SHOWN AT
ACTUAL SIZE ON 0.1 GRID)
FIG. A
FIG. B
CLASS 60 PRINTED CIRCUIT BOARD MINIATURE RELAY
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
7...14
GENERAL
GENERAL SPECIFICA
SPECIFICATIONS
TIONS
c us
UL CONTACT LOAD RATINGS TABLE
CLASS "B" & "F" COIL INSULATION SYSTEM.
WITHSTANDS THE VAPOR AND SPRAY
CLEANING OF MOST FLUXING SYSTEMS.
TERMINALS ARE SOLDER COATED TO
PROVIDE EXCELLENT SOLDERABILITY.
UL Recognized
File No. E195668
PART NUMBERS SHOWN AVAILABLE FROM
YOUR LOCAL MAGNECRAFT & STRUTHERS-DUNN
DISTRIBUTION. UL CLASS " F " COIL INSULATION
SYSTEM AVAILABLE ON SPECIAL ORDER.
CONTACT F ACT OR Y.
TEMPERATURE
Operating:
Storage:
VIBRATION RESISTANCE
Functional:
SHOCK RESISTANCE
Functional:
Mechanical:
LIFE EXPECTANCY
Electrical:
Mechanical:
MISCELLANEOUS
Operating Position:
Enclosure:
Weight:
-40˚C to +70˚C
-40˚C to +80˚C
10 to 55Hz dual amplitude 1.5 mm
10 g' s
100 g' s
100,000 operations
@ rated resistive load.
10,000,000 operations @ no load
Any
Plastic, epoxy sealed, suitable for
automatic circuit board processing.
After cleaning process, pierce a small
hole in cover for venting
10 g Approx.
75% of nominal voltage or less
10% min. of nominal voltage or more
110%
±10% measured @ 20˚C
0.36 watts, 48 VDC : 0.51watts
Class "B"
(130˚C per UL standart 1446)
Continuous
Silver alloy
See "UL CONTACT LOAD RATING TABLE"
100 milliohms @ 24 VDC & 1 Amp max
2400 VA / 240 W
6 VDC / 0.1 A
10 mS max. @ nominal voltage
5 mS max. @ nominal voltage
1500 V rms
750 V rms
100 Megohms @ 500 VDC
COIL
Pull-in Voltage:
Dropout Voltage:
Max. Voltage:
Resistance:
Coil Power:
Insulation System:
Duty:
CONTACTS
Contact Material:
Contact Rating:
Contact Resistance:
Max. Switching Power:
Min. Load:
TIMING
Operate Time:
Release Time:
DIELECTRIC STRENGTH
Contacts to Coil:
Across Open Contacts:
Insulation Resistance:
SPST- N.O. 15 AMPS
& SPDT
10 AMPS
10AMP
-
-
-
12 AMP
-
-
-
3.75 AMP
-
100,000
100,000
20,000
6,000
100,000
34,000
21,000
7,000
100,000
6,000
OPERATIONS
LOAD VOLTAGE
277 VAC
120 VAC
120 VAC
125 VAC
30 VDC
120 VAC
120 VAC
120 VAC
480 VAC
120 VAC
LOAD
GENERAL
RESISTIVE
RESISTIVE
GENERAL
RESISTIVE
MOTOR
BALLAST
TUNGSTEN
SPST-
SPDT
N.O. & N.C. LOAD N.O. LOAD N.C. LOAD
-
-
12 AMP
15 AMP
-
1/4 HP
-
15 AMP
-
TV - 5
-
12 AMP
-
-
-
-
1/4 HP
-
-
-
CLASS A178 PRINTED CIRCUIT BOARD STANDARD RELAY
7...15 PHONE: ( 843 ) 393-5778 F AX: ( 843 ) 393-4123 EMAIL: info@magnecraft.com
WIRING DIAGRAMS
(VIEWED FROM PIN END)
STANDARD
PART
NUMBERS
NOMINAL
INPUT
VOLTAGE
NOMINAL
RESISTANCE
(OHMS)
COIL MEASURED @ 25˚C
CONTACT
CONFIGU-
RATION
SPST-NO
SPST-NO
SPST-NO
SPST-NO
SPST-NO
SPDT
SPDT
SPDT
SPDT
SPDT
0.750 MAX.
(19)
0.630 MAX.
(16)
0.197 MAX.
(5)
0.020 MAX.
(0.5) 0.039 MAX.
(1)
0.012 MAX.
(0.3)
0.051 MAX.
(1.3) 4 PLACES
0.134 MAX.
(3.4)
0.480 MAX.
(12.2)
0.079 MAX.
(2)
0.236 MAX.
(6)
0.236 MAX.
(6)
SPST-N.O. SPDT
0.051 MAX.
(1.3) 5 PLACES
0.134 MAX.
(3.4)
0.480 MAX.
(12.2)
0.079 MAX.
(2)
0.236 MAX.
(6)
0.236 MAX.
(6)
PRINTED CIRCUIT
MOUNTING HOLE LAYOUT
(BOTTOM VIEW)
0.020 MAX.
(0.5) 0.039 MAX.
(1)
0.611 MAX.
(15.5)
3 VDC
5 VDC
12 VDC
24 VDC
48 VDC
3 VDC
5 VDC
12 VDC
24 VDC
48 VDC
A178URE1A-3DC
A178URE1A-5DC
A178URE1A-12DC
A178URE1A-24DC
A178URE1A-48DC
A178URE1-3DC
A178URE1-5DC
A178URE1-12DC
A178URE1-24DC
A178URE1-48DC
25 Ω
70 Ω
400 Ω
1600 Ω
4500 Ω
25 Ω
70 Ω
400 Ω
1600 Ω
4500 Ω
SPST- N.O. 15 AMPS
& SPDT
10 AMPS
15 AMPS
10 AMPS
CLASS A178 PRINTED CIRCUIT BOARD STANDARD RELAY
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
7...16
GENERAL
GENERAL SPECIFICA
SPECIFICATIONS
TIONS
c us
UL CONTACT LOAD RATINGS TABLE
UL Recognized
File No. E52197
TEMPERATURE
Operating:
Storage:
VIBRATION RESISTANCE
Functional:
SHOCK RESISTANCE
Functional:
Mechanical:
LIFE EXPECTANCY
Electrical:
Mechanical:
MISCELLANEOUS
Soldering Temperature:
Operating Position:
Enclosure:
Weight:
-55˚C to +85˚C
-55˚C to +130˚C
10 to 55 Hz @ 1.65mm displacement
10 g's
100 g's
100,000 operations
@ rated resistive load
50,000,000 operations @ no load
270˚C (518˚F) Max. for 5 seconds max
Any
Dust cover
42 g Approx
VG, VW adj. (DC) = 75%,
VF, VG adj. (AC) = 80% of nominal
coil voltage or less.
10% of actual pull-in or more
120% max.
±10%
Continuous
Silver cad oxide (5, 10 Amp), silver,
gold plated (3 Amp).
100 milliohms max. initial value
@ 6 VDC, 1 Amp
10 mS typ. (25 mS max.)
7 mS typ. (10 mS max.)
1,500 V rms
500 V rms
1,500 V rms
1000 mΩ min. @ 500 VDC
COIL
Pull-in Voltage:
Dropout Voltage:
Max. Voltage:
Resistance:
Duty:
CONTACTS
Contact Material:
Contact Resistance:
TIMING
Operate Time:
Release Time:
DIELECTRIC STRENGTH
Contacts to Coil:
Across Open Contacts:
Coil to Frame:
Insulation Resistance:
SPDT, 3, 5 & 10
AMPS
CONTACT
MATERIAL
SIL
SCO
SCO
ONLY 1.1 CUBIC INCHES. VARIETY OF MOUNTING
CONFIGURATIONS. TAPPED MOUNTING HOLES (49R1C4).
TV 5 RATING AVAILABLE. STANDARD PILOT DUTY 240 VAC.
MAGNETIC MOTOR CONTROLLER RATING 1/3 HP AT 120VAC.
LOAD VOLTAGE
3 AMP
15 AMP
5 AMP
TV-3
PILOT DUTY
10 AMP
10AMP
10AMP
1/3 HP
1/8 HP
TUNGSTEN
1/4 HP
BALLAST
1/6 HP
15 AMP
480 VAC
PILOT DUTY
TV-5
TV-3
28 VDC, 120 VAC
28 VDC, 150 VAC, N. O. ONLY
28 VDC, 120 VAC
120 VAC
B300 ( 120/240 VAC)
120/240 VAC
28 VDC
277 VAC
120 VAC
240 VAC, N. O. ONLY
277 VAC, N. C. ONLY
2AMP, 240W,120 VAC, N. C. ONLY
5AMP, 600W,120 VAC, N. O. ONLY
277 VAC, N. O. ONLY
480 VAC @ 277 VAC, SPDT
120/240 VAC, N. C. ONLY
28 VDC, 150 VAC, N. O. ONLY
2AMP MAX, 240/270 VAC
B300 ( 120/240 VAC)
120 VAC, N. O. ONLY
120 VAC
NOTES: SCO = SILVER CADMIUM OXIDE; SIL = SILVER.
MANUFACTURED UNDER
ISO 9002 & QS 9000
TYPE
3AMP
5AMP
10AMP
CLASS 49 PRINTED CIRCUIT BOARD ENCLOSED RELAY
7...17 PHONE: ( 843 ) 393-5778 F AX: ( 843 ) 393-4123 EMAIL: info@magnecraft.com
STANDARD
PART
NUMBERS
NOMINAL
INPUT
VOLTAGE
NOMINAL
RESISTANCE
(OHMS)
COIL MEASURED
@
25˚C
CONTACT
CONFIGU-
RATION
WIRING DIAGRAMS
(VIEWED FROM PIN END)
SPDT
3 VDC
5 VDC
12 VDC
6 VDC
12 VDC
24 VDC
5 VDC
12 VDC
24 VDC
6 VDC
12 VDC
24 VDC
5 VDC
12 VDC
24 VDC
5 VDC
12 VDC
5 VDC
24 VDC
90 Ω
235 Ω
1350 Ω
410 Ω
1640 Ω
6560 Ω
235 Ω
1350 Ω
5400 Ω
410 Ω
1640 Ω
6560 Ω
100 Ω
600 Ω
2400 Ω
235 Ω
1350 Ω
100 Ω
2400 Ω
3 AMP STYLE RE1C1
W49RE1C1VG-3DC-SIL
W49RE1C1VG-5DC-SIL
W49RE1C1VG-12DC-SIL
W49RE1C2VF-6DC-SIL
W49RE1C2VF-12DC-SIL
W49RE1C2VF-24DC-SIL
5 AMP STYLE RE1C1 AND RE1C2
W49RE1C1VG-5DC-SCO
W49RE1C1VG-12DC-SCO
W49RE1C1VG-24DC-SCO
W49RE1C2VF-6DC-SCO
W49RE1C2VF-12DC-SCO
W49RE1C2VF-24DC-SCO
10 AMP STYLE RE1C1
W49RE1C1VW-5DC-SCO
W49RE1C1VW-12DC-SCO
W49RE1C1VW-24DC-SCO
SOLDER TERMINALS, BRACKET MOUNTING 10 AMP STYLE RE1C4
W49R1C4VG-5DC-SCO
W49R1C4VG-12DC-SCO
10 AMP STYLE RE1C4
W49R1C4VW-5DC-SCO
W49R1C4VW-24DC-SCO
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
0.759 MAX.
(19.3)
1.14 MAX.
(29.1)
0.21
(5.3)
1.25 MAX.
(31.7)
0.31
(7.8)
1.015
(25.7)
0.131
(0.33)
0.379
(9.63)
0.759 MAX.
(19.3)
0.21
(5.3)
1.25 MAX.
(31.7)
0.31
(7.8)
0.546
(13.8)
1.14 MAX.
(29.1)
0.593
(15) 0.453
(11.5) 0.843
(21.4)
0.313
(7.9)
0.186 TYP.
(4.72)
0.150
(3.8)
0.594
(15)
0.687
(17,4)
0.21
(5.3)
0.562
(14.2)
0.31
(7.8)
1.14 MAX.
(29.1)
0.843
(21.4)
0.313
(7.9)
0.186 TYP.
(4.72)
0.150
(3.8)
0.759 MAX.
(19.3)
0.915
(23.2)
1.34 MAX.
(34.1)
4-40 TAPPED
HOLES
(2 REQ.)
STYLE RE1C1
R1C4 STYLE RE1C2
1.225 MAX.
(31.1)
STYLE R1C4
STYLE RE1C2 STYLE RE1C1
SPDT, 3, 5 & 10
AMPS
CLASS 49 PRINTED CIRCUIT BOARD ENCLOSED RELAY
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
7...18
GENERAL
GENERAL SPECIFICA
SPECIFICATIONS
TIONS
c us
COIL
Pull-in Voltage:
Dropout Voltage:
Max. Voltage:
Resistance:
Coil Power:
Insulation System:
Max. Coil Dissipation:
Duty:
CONTACTS
Contact Material:
Contact Rating:
Contact Resistance:
TIMING
Operate T ime:
Release Time:
DIELECTRIC STRENGTH
Contacts to Coil:
Across Open Contacts:
Pole to Pole:
Insulation Resistance:
TEMPERATURE
Operating:
Storage:
VIBRATION RESISTANCE
Functional:
SHOCK RESISTANCE
Functional:
Mechanical:
LIFE EXPECTANCY
Electrical:
Mechanical:
MISCELLANEOUS
Operating Position:
Enclosure:
Weight:
-20˚C to +55˚C
-40˚C to +80˚C
10 to 55 Hz dual amplitude 1.5 mm
10 g's (11mS)
100 g's (6mS)
100,000 operations
@ rated resistive load
10,000,000 operations @ no load
Any
Plastic, epoxy sealed, suitable
for automatic circuit board
processing. After cleaning process,
pierce a small hole in cover for
venting
17 grams approx.
UL CONTACT LOAD RATINGS TABLE
UL Recognized
File No. E191122
* UL CLASS "F" COIL INSULATION SYSTEM AVAILABLE.
* AC COIL VOLTAGES.
* UL RATED TV-3, TV-5 OR TV-8, N. O. ONLY.
* CONTACTS RATED UP TO 20 AMP.
* 8 MILLIMETERS MINIMUM. CLEARANCE. COIL TO CONTACTS.
* DIELECTRIC STRENGTH: 5,000 V rms.
TUV
SPDT & DPDT 5, 12 & 20 AMPS
250 VAC
30 VDC
250 VAC
30 VDC
250 VAC
30 VDC
LOAD
RESISTIVE
INDUCTIVE
TV
LOAD
VOLTAGE DPDT
FIGURE “ A “
5 AMP
5 AMP
7 AMP (N.O.)
7 AMP (N.O.)
*2 AMP
†2 AMP
DPST - N.O.
TV - 3
12 AMP
12 AMP
10 AMP(TUV)
10 AMP(TUV)
*5 AMP
†5 AMP
SPDT - N.O.
TV - 5
SPDT
FIGURE “ B “ SPDT
FIGURE “ C “
20 AMP (120 VAC)
20AMP
16 AMP (UL - TUV.)
16 AMP (UL - TUV.)
*8 AMP
†8 AMP
SPST - N.O.
TV - 8
* COSØ = 0.4 (TUV)
† L/R = 7mS (TUV)
MANUFACTURED UNDER
ISO 9002 & QS 9000
CLASS 976 PRINTED CIRCUIT BOARD SLIM - LINE RELAY
85% of nominal voltage or less for AC
75% of nominal voltage or less for DC
30% min. of nominal voltage or more
for AC
10% min. of nominal voltage or more
for DC
110%
±10% measured @ 25˚C
AC 1.2 VA, DC 0.54 watts
@ nominal voltage
Class “B” (130˚C per UL standart 1446)
Class “F” available
1.5 VA (60Hz) @ 25˚C
Continuous
Silver cadmium oxide
See:
“UL CONTACT LOAD RATINGS TABLE”
100 milliohms min
15 mS max. @ nominal voltage
10 mS max. @ nominal voltage
5000 V rms; (8 mm creepage & clearance)
1000 V rms
2500 V rms
100 megohms 500 VDC
7...19 PHONE: ( 843 ) 393-5778 FAX: ( 843 ) 393-4123 EMAIL: info@magnecraft.com
STANDARD
PART
NUMBERS
NOMINAL
INPUT
VOLTAGE
NOMINAL
RESISTANCE
(OHMS & VA)
COIL MEASURED
@
25˚C
CONTACT
CONFIGU-
RATION
DPDT
DPDT
DPDT
DPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
DPDT
DPDT
DPDT
SPDT
SPDT
SPDT
SPDT
SPDT
SPDT
1.161 MAX.
(29.5) 0.512 MAX.
(13.0)
1.00 MAX.
(25.5)
0.051 TYP.
(1.3) 0.177 MAX.
(4.5)
0.016 TYP.
(0.4)
5 VDC
6 VDC
12 VDC
24 VDC
5 VDC
6 VDC
12 VDC
24 VDC
5 VDC
6 VDC
12 VDC
24 VDC
24 VAC
120 VAC
240 VAC
24 VAC
120 VAC
240 VAC
24 VAC
120 VAC
240 VAC
47 Ω
68 Ω
270 Ω
1100 Ω
47 Ω
68 Ω
270 Ω
1100 Ω
47 Ω
68 Ω
270 Ω
1100 Ω
4400 Ω
250 Ω
5,600 Ω
22000 Ω
250 Ω
5,600 Ω
22000 Ω
250 Ω
5,600 Ω
22000 Ω
FIG. “A”
FIG. “B”
FIG. “C”
0.197 MAX.
(5.0)
0.295 MAX.
(7.5)
0.051 TYP.
(1.3)
0.787 MAX.
(20.0)
0.787 MAX.
(20.0)
0.276 MAX.
(7.0)
0.394 MAX.
(10.0)
0.787 MAX.
(20.0)
SPDT & DPDT 5, 12 & 20 AMPS
DC OPERATED COIL, FIG. A
DC OPERATED COIL, FIG. B
CLASS 976 PRINTED CIRCUIT BOARD SLIM - LINE RELAY
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
WIRING DIAGRAMS
(VIEWED FROM PIN END)
FIG. A
FIG. B
FIG. C
976XBXH-5D / 76EURCPCX-61
976XBXH-6D / 76EURCPCX-62
976XBXH-12D / 76EURCPCX-63
976XBXH-24D / 76EURCPCX-64
976XAX97H-5D / 76EURCPCX-146
976XAX97H-6D / 76EURCPCX-147
976XAX97H-12D / 76EURCPCX-148
976XAX97H-24D / 76EURCPCX-149
976XAXH-5D / 76EURCPCX-14
976XAXH-6D / 76EURCPCX-15
976XAXH-12D / 76EURCPCX-16
976XAXH-24D / 76EURCPCX-17
976XBXH-24A
976XBXH-120A
976XBXH-240A
976XAX97H-24A
976XAX97H-120A
976XAX97H-240A
976XAXH-24A
976XAXH-120A
976XAXH-240A
DC OPERATED COIL, FIG. C
AC OPERATED COIL, FIG. A
AC OPERATED COIL, FIG. B
AC OPERATED COIL, FIG. C
OTHER COIL VOLTAGES ARE AVAILABLE ON SPECIAL ORDER.
CONTACT FACTORY FOR SPECIAL REQUIREMENTS.
PRINTED CIRCUIT
MOUNTING HOLE LAYOUT
( BOTTOM VIEW )
7...20
SPST-N.O. & SPDT 10 AMPS
GENERAL
GENERAL SPECIFICA
SPECIFICATIONS
TIONS
COIL
Pull-in Voltage:
Dropout Voltage:
Max. Voltage:
Resistance:
Coil Power:
CONTACTS
Contact Material:
Contact Resistance:
TIMING
Operate Time:
Release Time:
DIELECTRIC STRENGTH
Contacts to Coil:
Across Open Contacts:
Surge Voltage Resistance:
Insulation Resistance:
TEMPERATURE
Operating:
Storage:
VIBRATION RESISTANCE
Functional:
SHOCK RESISTANCE
Functional:
LIFE
EXPECTANCY
Electrical:
Mechanical:
MISCELLANEOUS
Operating Position:
Enclosure:
Weight:
MANUFACTURED UNDER
ISO 9002 c us
UL Recognized
File No. E190964
UL CONTACT LOAD RATINGS TABLE
LOAD
RESISTIVE
MOTOR
*POWER
SPST-NO
10 AMP
10 AMP
1/6 HP
300 WATTS
2500 VA
SPDT
7 AMP
7 AMP
1/10 HP
210 WATTS
1750 VA
* Voltage and Power Ratings in the table Above are Independent
Maximums and no Single Value is to be Exceeded.
STANDARD
PART
NUMBERS
NOMINAL
INPUT
VOLTAGE
NOMINAL
RESISTANCE
(OHMS)
COIL MEASURED @ 25˚C
CONTACT
CONFIGU-
RATION
276AXXH-5D
276AXXH-6D
276AXXH-12D
276AXXH-24D
276XAXH-5D
276XAXH-6D
276XAXH-12D
276XAXH-24D
SPST-NO
SPST-NO
SPST-NO
SPST-NO
SPDT
SPDT
SPDT
SPDT
5 VDC
6 VDC
12 VDC
24 VDC
5 VDC
6 VDC
12 VDC
24 VDC
125 Ω
180 Ω
720 Ω
2880 Ω
125 Ω
180 Ω
720 Ω
2880
WIRING DIAGRAM
(VIEWED FROM PIN END)
PRINTED CIRCUIT
MOUNTING HOLE LAYOUT
(TOP VIEW SHOWN AT
ACTUAL SIZE ON 0.1 GRID)
DTL COMPATIBLE SINGLE-SIDE STABLE DESIGN.
5KV SURGE RESISTANCE COIL TO CONTACT MEETS
INTERNATIONAL SPACING OF 4 mm. 0.50
(12.7)
0.807 MAX.
(20.5)
0.394 MAX.
(10)
0.138 MAX.
(3.5)
0.5 MAX.
(12.7)
0.020 DIA.
(0.5)
2 COIL TERMINALS
0.015 X 0.030
(0.4 X0.8)
3 PLACES
SPDT
SPST-N.O.
LOAD VOLT AGE/
CURRENT
240 VAC
30 VDC
120 VAC
WATTS (VDC)
VA
CLASS 276
PRINTED CIRCUIT BOARD LOW PROFILE POWER RELAY
70% of nominal voltage or less
10% of nominal voltage or more
110%
±10%
200 mW approx
Silver alloy
100 milliohms initial @ 6 VDC, 1 Amp
10 mS max. @ nominal voltage
10 ms max. @ nominal voltage
2000 V rms
1000 V rms
5000 V rms between coil and contacts
500 VDC exceeds 1000 megohms min
-40˚C to +70˚C
-40˚C to +100˚C
10 to 55Hz, dual amplitude 1.5 mm
100g's 6 mS no damage
100,000 operations @ rated resistive load
10,000,000 operations @ no load
Any
Plastic cover, epoxy sealed
5.5 grams approx.
OUTLINE DIMENSIONS
DIMENSIONS SHOWN IN INCHES & (MILLIMETERS).
7...21 PHONE: ( 843 ) 393-5778 F AX: ( 843 ) 393-4123 EMAIL: info@magnecraft.com
Your Contact for Relays
THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS.
CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED.
MAGNECRAFT
& STRUTHERS-DUNN
MAGNECRAFT
& STRUTHERS-DUNN POTTER &
BRUMFIELD
POTTER &
BRUMFIELD
AMERICAN
ZETTLER
AROMAT
AROMAT AMERICAN
ZETTLER OMRON
OMRON
W90S1D12-5
W90S1D12-12
W90S1D12-24
W90S1D12-110
W90S5D12-5
W90S5D12-12
W90S5D12-24
W90S5D12-110
W90S1D42-5
W90S1D42-12
W90S1D42-24
W90S1D42-110
W90S5D42-5
W90S5D42-12
W90S5D42-24
W90S5D42-110
W9AS1D22-5
W9AS1D22-12
W9AS1D22-24
W9AS1D22-48
W9AS1D22-110
W9AS5D22-5
W9AS5D22-12
W9AS5D22-24
W9AS5D22-48
W9AS5D22-110
W92S7A12-24
W92S7A12-120
W92S7A12-240
W92S11A12-24
W92S11A12-120
W92S11A12-240
W92S7D12-12
W92S7D12-24
W92S7D12-48
W92S7D12-110
W92S11D12-12
W92S11D12-24
W92S11D12-48
W92S11D12-110
W7PCX-1
W7PCX-3
JTN1aE-PA-F-DC5V
JTN1aE-PA-F-DC12V
JTN1aE-PA-F-DC24V
JTN1E-PA-F-DC5V
JTN1E-PA-F-DC12V
JTN1E-PA-F-DC24V
JTN1aE-TMP-F-DC5V
JTN1aE-TMP-F-DC12V
JTN1aE-TMP-F-DC24V
JTN1aE-TMP-F-DC48V
JTN1aE-TMP-F-DC110V
JTN1E-TMP-F-DC5V
JTN1E-TMP-F-DC12V
JTN1E-TMP-F-DC24V
JTN1E-TMP-F-DC48V
JTN1E-TMP-F-DC110V
MMS105
MMS102
AZ2150(or 2151)-1A-5DE
AZ2150(or 2151)-1A-12DE
AZ2150(or 2151)-1A-24DE
AZ2150(or 2151)-1A-110DE
AZ2150(or 2151)-1C-5DE
AZ2150(or 2151)-1C-12DE
AZ2150(or 2151)-1C-24DE
AZ2150(or 2151)-1C-110DE
AZ2150(or 2151)-1A-5DEF
AZ2150(or 2151)-1A-12DEF
AZ2150(or 2151)-1A-24DEF
AZ2150(or 2151)-1A-110DEF
AZ2150(or 2151)-1C-5DEF
AZ2150(or 2151)-1C-12DEF
AZ2150(or 2151)-1C-24DEF
AZ2150(or 2151)-1C-110DEF
G8P-1A4-DC5
G8P-1A4-DC12
G8P-1A4-DC24
G8P-1A4-DC110
G8P-1C4-DC5
G8P-1C4-DC12
G8P-1C4-DC24
G8P-1C4-DC110
G8P-1A4-CF-DC5
G8P-1A4-CF-DC12
G8P-1A4-CF-DC24
G8P-1A4-CF-DC110
G8P-1C4-CF-DC5
G8P-1C4-CF-DC12
G8P-1C4-CF-DC24
G8P-1C4-CF-DC110
G7L-2A-P-CB-AC24
G7L-2A-P-CB-AC120
G7L-2A-P-CB-AC240
G7L-2A-P-CB-DC12
G7L-2A-P-CB-DC24
G7L-2A-P-CB-DC48
G7L-2A-P-CB-DC110
T90S1D12-5 (CLASS F)
T90S1D12-12 (CLASS F)
T90S1D12-24 (CLASS F)
T90S1D12-110 (CLASS F)
T90S5D12-5 (CLASS F)
T90S5D12-12 (CLASS F)
T90S5D12-24 (CLASS F)
T90S5D12-110 (CLASS F)
T90S1D42-5
T90S1D42-12;T9AS1D12-12
T90S1D42-24 T9AS1D12-24
T90S1D42-110
T90S5D42-5
T90S5D42-12
T90S5D42-24
T90S5D42-110
MAGNECRAFT
& STRUTHERS-DUNN
MAGNECRAFT
& STRUTHERS-DUNN POTTER &
BRUMFIELD
POTTER &
BRUMFIELD
AMERICAN
ZETTLER
AROMAT
AROMAT AMERICAN
ZETTLER
MAGNECRAFT
& STRUTHERS-DUNN
MAGNECRAFT
& STRUTHERS-DUNN POTTER &
BRUMFIELD
POTTER &
BRUMFIELD
AMERICAN
ZETTLER
AMERICAN
ZETTLER OMRON
OMRON
MAGNECRAFT
& STRUTHERS-DUNN
MAGNECRAFT
& STRUTHERS-DUNN MIDTEX
MIDTEX
T9AS1D22-5
T9AS1D22-12
T9AS1D22-24
T9AS1D22-48
T9AS1D22-110
T9AS5D22-5
T9AS5D22-12
T9AS5D22-24
T9AS5D22-48
T9AS5D22-110
T92S7A12-24
T92S7A12-120
T92S7A12-240
T92S11A12-24
T92S11A12-120
T92S11A12-240
T92S7D12-12
T92S7D12-24
T92S7D12-120
T92S7D12-240
T92S11D12-12
T92S11D12-24
T92S11D12-120
T92S11D12-240
AZ2100-1A-5DEF
AZ2100-1A-12DEF
AZ2100-1A-24DEF
AZ2100-1A-48DEF
AZ2100-1A-110DEF
AZ2100-1C-5DEF
AZ2100-1C-12DEF
AZ2100-1C-24DEF
AZ2100-1C-48DEF
AZ2100-1C-110DE
AZ2850-2A-24A
AZ2850-2A-120A
AZ2850-2A-240A
AZ2850-2C-24A
AZ2850-2C-120A
AZ2850-2C-240A
AZ2800-2A-12D
AZ2800-2A-24D
AZ2800-2A-48D
AZ2800-2A-110D
AZ2800-2C-12D
AZ2800-2C-24D
AZ2800-2C-48D
AZ2800-2C-110D
7...22
SECTION
SECTION 7
7 CROSS REFERENCE GUIDE
Your Contact for Relays
THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS.
CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED.
MAGNECRAFT
& STRUTHERS-DUNN
MAGNECRAFT
& STRUTHERS-DUNN
W7PCX-4
W7PCX-5
W7PCX-7
W7PCX-8
W60HE1S-5DC
W60HE1S-12DC
W60HE1S-24DC
W60HE1S-48DC
W60HE2S-5DC
W60HE2S-12DC
W60HE2S-24DC
W60HE2S-48DC
A178URE1A-3DC
A178URE1A-5DC
A178URE1A-12DC
A178URE1A-24DC
A178URE1A-48DC
A178URE1-3DC
A178URE1-5DC
A178URE1-12DC
A178URE1-24DC
A178URE1-48DC
W49RE1C1VG-3DC-SIL
W49RE1C1VG-5DC-SIL
W49RE1C1VG-12DC-SIL
W49RE1C1VG-5DC-SCO
W49RE1C1VG-12DC-SCO
W49RE1C1VG-24DC-SCO
W49RE1C1VW-5DC-SCO
W49RE1C1VW-12DC-SCO
W49RE1C1VW-24DC-SCO
976XBXH-5D / 76EURCPCX-61
976XBXH-6D / 76EURCPCX-62
976XBXH-12D / 76EURCPCX-63
976XBXH-24D / 76EURCPCX-64
976XAX97H-5D / 76EURCPCX-146
976XAX97H-6D / 76EURCPCX-147
976XAX97H-12D / 76EURCPCX-148
976XAX97H-24D / 76EURCPCX-149
976XAX97H-48D / 76EURCPCX-150
MMS124
MMS205
MMS212
MMS224
NOT AV AILABLE
JS1a-5V
JS1a-12V
JS1a-24V
JS1a-48V
NOT AV AILABLE
JS1-5V
JS1-12V
JS1-24V
JS1-48V
NOT AV AILABLE
NOT AV AILABLE
NOT AV AILABLE
NOT AV AILABLE
NOT AV AILABLE
NOT AV AILABLE
AZ941-1CT-5DEB
AZ941-1CT-12DEB
AZ941-1CT-24DEB
AZ941-1CT-48DEB
G5LE-1A4(as is or ACD, or-ASI)-DC3
G5LE-1A4(as is or ACD, or-ASI)-DC5
G5LE-1A4(as is or ACD, or-ASI)-DC12
G5LE-1A4(as is or ACD, or-ASI)-DC24
G5LE-1A4(as is or ACD, or-ASI)-DC48
G5LE-14(as is or ACD, or-ASI)-DC3
G5LE-14(as is or ACD, or-ASI)-DC5
G5LE-14(as is or ACD, or-ASI)-DC12
G5LE-14(as is or ACD, or-ASI)-DC24
G5LE-14(as is or ACD, or-ASI)-DC48
G2R-24-DC5
G2R-24-DC6
G2R-24-DC12
G2R-24-DC24
G2R-1-E-DC5
G2R-1-E-DC6
G2R-1-E-DC12
G2R-1-E-DC24
G2R-1-E-DC48
R50E2Y1-5V
R50E2Y1-12V
R50E2Y1-24V
R50E2Y1-48V
R50E2Y2-5V
R50E2Y2-12V
R50E2Y2-24V
R50E2Y2-48V
T7NS1D1-3
T7NS1D1-5
T7NS1D1-12
T7NS1D1-24
T7NS1D1-48
T7NS5D1-3
T7NS5D1-5
T7NS5D1-12
T7NS5D1-24
T7NS5D1-48
653-3K
653-6K
653-12K
603-6B
603-12B
603-24B
613-6B
613-12B
613-24B
RTE24005F
RTE24006F
RTE24012F
RTE24024F
RTD14005F
RTD14006F
RTD14012F
RTD14024F
RTD14048F
MAGNECRAFT
& STRUTHERS-DUNN
MAGNECRAFT
& STRUTHERS-DUNN POTTER &
BRUMFIELD
POTTER &
BRUMFIELD
MAGNECRAFT
& STRUTHERS-DUNN
MAGNECRAFT
& STRUTHERS-DUNN POTTER &
BRUMFIELD
POTTER &
BRUMFIELD
AMERICAN
ZETTLER
AROMAT
AROMAT AMERICAN
ZETTLER OMRON
OMRON
MAGNECRAFT
& STRUTHERS-DUNN
MAGNECRAFT
& STRUTHERS-DUNN CORNELL
DUBILIER
CORNELL
DUBILIER
MIDTEX
MIDTEX
MIDTEX
MIDTEX
MAGNECRAFT
& STRUTHERS-DUNN
MAGNECRAFT
& STRUTHERS-DUNN
MAGNECRAFT
& STRUTHERS-DUNN POTTER &
BRUMFIELD
POTTER &
BRUMFIELD
AMERICAN
ZETTLER
AROMAT
AROMAT AMERICAN
ZETTLER OMRON
OMRON
AZ733-2C-5DE
AZ733-2C-6DE
AZ733-2C-12DE
AZ733-2C-24DE
AZ755-1C-5DE
AZ755-1C-6DE
AZ755-1C-12DE
AZ755-1C-24DE
AZ755-1C-48DE
JW2SN-DC5V
JW2SN-DC6V
JW2SN-DC12V
JW2SN-DC24V
NOT AV AILABLE
NOT AV AILABLE
NOT AV AILABLE
NOT AV AILABLE
NOT AV AILABLE
7...23
SECTION
SECTION 7
7 CROSS REFERENCE GUIDE
SECTION
SECTION 7
7 CROSS REFERENCE GUIDE
Your Contact for Relays
THE CROSS REFERENCE IS INTENDED TO MATCH FOOT PRINT, INTERNAL WIRING, AND CONTACT LOAD RATINGS.
CONSTRUCTION FEATURES AND GENERAL SPECIFICATIONS SHOULD BE COMPARED IF EXACT REPLACEMENT IS REQUIRED.
MAGNECRAFT
& STRUTHERS-DUNN JW1FSN-DC5V
JW1FSN-DC6V
JW1FSN-DC12V
JW1FSN-DC24V
JW1FSN-DC48V
1330P-2C-24A
1330P-2C-120A
1335P-2C-12D
1335P-2C-24D
NOT AV AILABLE
NOT AV AILABLE
NOT AV AILABLE
NOT AV AILABLE
NOT AV AILABLE
G2R-14-DC5
G2R-14-DC6
G2R-14-DC12
G2R-14-DC24
G2R-14-DC48
G2R-24-AC24
G2R-24-AC120
G2R-24-AC240
G2R-1-E-AC24
G2R-1-E-AC120
G2R-1-E-AC240
G2R-14-AC24
G2R-14-AC120
G2R-14-AC240
RTB14005F
RTB14006F
RTB14012F
RTB14024F
RTB14048F
RTE24524
RTE24615
RTE24730
RTD34524
RTD34615
RTD34730
RTB14524
RTB14615
RTB14730
MAGNECRAFT
& STRUTHERS-DUNN
MAGNECRAFT
& STRUTHERS-DUNN POTTER &
BRUMFIELD
POTTER &
BRUMFIELD
AMERICAN
ZETTLER
AROMAT
AROMAT AMERICAN
ZETTLER OMRON
OMRON
MAGNECRAFT
& STRUTHERS-DUNN
MAGNECRAFT
& STRUTHERS-DUNN GUARDIAN
U. S.
U. S. A
A.
.
TELEPHONE: (843) 393-5778
FAX: (843) 393-4123
WEBSITE: www.magnecraft.com
EMAIL: info@magnecraft.com
EUROPE
EUROPE
TELEPHONE: 4989 / 75080310
FAX: 4989 / 7559344
WEBSITE: www.magnecraft.com
EMAIL: renatesteinback@magnecraft.de
Zhuhong Tang,PRODUCT MANAGER
FAX: (847) 441-2522
EMAIL: zhtang@magnecraft.com
FAX ON DEMAND: 1-800-891-2957
DOCUMENT: 500
GUARDIAN
FOR
FOR PRINTED CIRCUIT BOARD
PRINTED CIRCUIT BOARD RELA
RELAYS
YS
APPLICA
APPLICATION
TION ENGINEERING
ENGINEERING ASSIST
ASSISTANCE
ANCE
976XAXH-5D / 76EURCPCX-14
976XAXH-6D / 76EURCPCX-15
976XAXH-12D / 76EURCPCX-16
976XAXH-24D / 76EURCPCX-17
976XAXH-48D / 76EURCPCX-18
110VDC COIL AVAILABLE ON CLASS 976
976XBXH-24A
976XBXH-120A
976XBXH-240A
976XAX97H-24A
976XAX97H-120A
976XAX97H-240A
976XAXH-24A
976XAXH-120A
976XAXH-240A
W1330P-2C-24A
W1330P-2C-120A
W1335P-2C-12D
W1335P-2C-24D
7...24
