PACKING Tape and Reel Orientation USER DIRECTION OF FEED NOTE : Top view shown with cover tape removed. MODEL TAPE WIDTH REEL WIDTH COMPONENT PITCH UNITS PER REEL SMI-40 SERIES 12mm 18.4mm 8mm 2500 SMI-50 SERIES 16mm 22.4mm 8mm 1000 TAPE SPECIFICATIONS: SMI-40 SERIES SMI-50 SERIES Carrier Tape Type : Conductive. Cover Tape Type : Non-antistatic. Cover Tape Adhesion to Carrier : 60 - 175 grams. Carrier Tape Type : Conductive. Cover Tape Type : Antistatic. Cover Tape Adhesion to Carrier :10 - 70 grams. REEL SPECIFICATIONS: Non-antistatic. Diameter (flange) : 13" (330.2mm) STANDARDS : All embossed carrier tape packaging will be accomplished in compliance with latest revision of EIA-481 "Taping of surface Mount Components for Automatic Placement". ENVIRONMENTAL PERFORMANCE ITEM 1 TEST Thermal Shock CONDITION Ten cycles of 30 minutes @ -55, 15 seconds maximum @ room ambient, 30 minutes @ +125, 15 seconds maximum @ room ambient. 2 Vibration 1 cycle of 30 minutes duration per the following. 5-7 Hz constant displacement of .75 inch, 5 minutes, 7-30 Hz constant acceleration of 1.5 g's. 10 minutes, 30-50 Hz constant displacement of 0.033 inch, 5 minutes, 50-500 Hz constant acceleration of 4.2 g's. 10 minutes. 3 Solderability Per MIL -STD-202, Method 208, except steam aging is omitted And pads are dipped 30 from vertical. Solder temperature: + 245 5.Immersion dwell time: 5 1/2 seconds. 4 Storage Life Subject the component to 168 hours at + 85and 85% relative humidity. 5 Moisture Resistance Precondition at + 40 for 60 minutes. Subject the component to 240 hours at + 40 and 90 to 95% relative humidity. 6 Mechanical Shock One-half sine pulse (8700 g's for 0.3 milliseconds)in each. direction along 3 mutually perpendicular axes in each direction (total of 6 shocks).