WIRE MANAGEMENT PRODUCTS Power Distribution Blocks Base & Rail Mount Euro-MAG Series
Connectors PCB – Spring Clamp
®
MAGNUM
Single & Double Row
Filtered Connectors
Series A4000 & Series B4000
Single Row Terminal Blocks
SPECIFICATIONS
Rating: See table.
Center Spacing: .562” or 9/16” (14.28 mm)
Wire Range: See rating table.
Screw Size:
Torque Rating:
20 in-lb.
Distance Between Barriers: .47” (11.9 mm)
Operating Temperature: 105°C (221°F) max., -40°C
(-40°F) min.
Molded Material: Black, UL Rated 94V0 Thermoplastic
Hardware: Bottom studs supplied with nuts assembled. A4000 Series
Cup washers are optional on bottom studs but are not
recommended with ring terminals.
B484304
A40110407
A481307
#8-32 or #10-32 zinc plated slotted screws
#8 screw size 16 in-lb.; #10 screw size
.87
(22.1)
A
B
1.05
(26.7)
#8-32 or #10-32 THD’S
.562
(14.27)
.31
(7.9)
.21
(5.3)
.57
(14.5)
.31
(7.9)
.36 dia.
(9.1)
Note: Above unit supplied with nuts
Extended Hex Nuts: Optional extended, slotted hex nuts
enable easier installation and removal with hex wrench or
screwdriver. Available in bulk for the #10-32 studs on
Series A4953 blocks. Specify part no. F582 and quantity.
Breakdown Voltage: 6100V
Agency Information: UL/CSA; CE Certified
RATING TABLE
Part Terminal Terminal Wire* Ratings*
Number Top Bottom Range CU
A4003XX # 8 Screw #8 Stud 8-16 AWG 150V; 50 amps
A4011XX # 8 Screw Solder 10-16 AWG 600V; 35 amps
A4013XX # 8 Screw Solder 10-16 AWG 600V; 35 amps
A4021XX # 8 Screw .250 QC 10-16 AWG 600V; 35 amps
A4035XX # 8 Screw Closed 8-16 AWG 600V; 50 amps
A4041XX #10 Screw Solder 10-16 AWG 600V; 35 amps
A4043XX #10 Screw Solder 10-16 AWG 600V, 35 amps
A4051XX #10 Screw 250 QC 10-16 AWG 600V; 35 amps
A4803XX #10 Screw #8 Stud 8-16 AWG 150V; 50 amps
A4813XX #10 Screw SolderTurret 10-16 AWG 600V; 35 amps
A4843XX #10 Screw #8 Screw 8-16 AWG 150V; 50 amps assembled. Cup washers are optional.
A4953XX #10 Stud #10 Stud 8-16 AWG 150V; 50 amps
B4843XX #10 Screw #8 Screw 8-16 AWG 600V; 50 amps
* All models 30A Max. with 10 AWG;
35-50A ratings with 8 AWG using ring or fork type terminals.
Optional Cup W
ashers
Note: 50A rating achieved with #8 copper wire crimped to ring terminal. Assembled
Available on A4003, A4803,
Poles A (in.) B (in.) A4843, A4953 & B4843.
Mount Centers Length
CUP
WASHERS
2 1.69 2.12
3 2.25 2.68
4 2.81 3.24
3.80
Refer
ence Panel Cutout for 6 Position Block
5 3.37
6 3.93 4.36 .20 DIA.
7 4.50 4.93
8 5.06 5.34
9 5.62 6.05
10 6.18 6.61
11 6.74 7.17
12 7.31 7.74
13 7.87 8.30
14 8.43 8.86
15 8.99 9.44
16 9.55 9.98
17 10.12 10.55
18
3.31
(84.1)
(5.1)
.75
(19.1)
3.93
(99.8)
10.68 11.11
* Dimensions in inches. To convert to millimeters, multiply by 25.4.
20
Euro-MAG Series Base & Rail Mount Power Distribution Blocks WIRE MANAGEMENT PRODUCTS
PCB – Spring Clamp Connectors
Part Numbering System
Series
00
- screw top; stud bottom
01
- screw top; solder bottom
Terminal Style
1
- flat base/
mount end
Base/End
02
to
18
Poles
Blank
- std. screw
00
- screws shipped bulk
Screw Options
A1
to
A9
- .250” QC
CW
- cup washer (pg 20)
Options
A4
- standard
02
- #8 screw top; .250 QC bottom
3
- insulator base/
04
- brass nickel plated
J301
- flat slip-on jumper (2 position only)
B4
- barrier
03
- screw top only mount end
07
- steel SEMS zinc
L1
to
L6
marking options (pg 22)
04
- #10 screw top; solder term. b.
5
- closed base/ plated (not available
S1 & S2
- solder lugs/flat
05
- #10 screw top; .250 QC bottom
insulated base
95
- stud top; stud bottom
mount end with hardware options;
A4803, A4813, A4843,
80
- screw top; stud bottom not available on A4003,
Covers
- (pg 23)
81
- screw top; solder turret bottom B4843)
84
- screw top; screw bottom
A 4
■■
■■■■
■■
B 4
Terminal Styles Inches (Millimeters)
#8-32 SCREW
#8-32 HEX NUT
.41
1.99
(50.6)
.94
(23.9)
(9.1)
(10.4)
A4003XX A4011XX
(#8-32)
A4013XX
(#8-32)
A4041XX (#10-32) A4043XX (#10-32)
.36
1.41
(35.8)
.43
(10.9)
.04
(1.0)
.17
(4.3)
#8-32 or #10-32 SCREW
#8-32 or #10-32 SCREW
1.41
(35.8)
.43
(10.9)
.04
(1.0)
#8-32 SCREW
(TYP)
#10-32 SCREW
.36
1.85
(47.0)
TURRET
.80
(20.3)
#10-32 SCREW
1.99
(50.6)
.41
(10.4)
#8-32 HEX NUT
.94
(23.9)
.250
(6.35)
1.56
(39.6)
.03
(.8) .59
(15.0)
#8-32 or #10-32 SCREW
(9.1)
A4021XX (#8-32)
A4035XX A4803XX A4813XX
A4051XX (#10-32)
#10-32 SCREW
1.55
(39.4)
#8-32 SCREW
.49
(12.5)
A4843XX
#10-32 SCREW
.41
(10.4)
1.84
(46.7)
#8-32 SCREW
.79
(20.1)
.30
(7.6)
.09
(2.4)
B4843XX
1.05
(26.7)
#10-32 STUD
.94
(23.9)
.41
(10.4)
#10-32 HEX NUT
1.99
(50.6)
A4953XX
Hardware Options (Bulk ordering part numbers are in parentheses.) Inches (Millimeters)
Solder Lugs Jumpers Quick Connects Blade Width A = .250”. (For other orientations, contact factory.)
.56 (14.3)
S1 J301 A1 A2 A3
(2S1) (4A1) (4A2) (4A3 )
1.12 (28.4)
S2 A4 A5 A6
(2S2) (4A4) (4A5) (4A6)
Single & Double Row
Filtered Connectors
A7
A8 A9
(4A7) (4A8) (4A9)
21
