2-1
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
Commercial Introduction
2
Call Toll Free: 1 (800) 323-9612
Cinch Commercial Products, consisting of Jones Plugs and Sockets, Barrier Blocks, Edge Cards, Two-Piece Commercial Dins,
Mini Din Plugs, and their newest addition the 75ΩPress-Fit BNC Receptacle, provide a wide variety of connectors for the
purchaser and designer to chose from.
The Jones Plugs and Sockets have been utilized for decades and provide a quick, reliable, and economical means of solving
your higher current-carrying capacity needs. Available in two series (300 and 2,400), these connectors can be found in data
processing controls; amusement and vending machines; medical, communication, and test equipment; as well as industrial
controls and heavy-duty, battery-powered equipment. Both series are available in a variety of cable and panel
mounting options.
Cinch Barrier Blocks are designed to simplify wiring work by reducing splicing, preventing current leaks and short circuits, and
increasing insulation. Available in a variety of densities, these barrier blocks can be found in applications ranging from industrial
controls to switching systems.
Designed specially for applications where space is at a premium, the Cinch Mini Din family is ideal for personal computers,
keyboard-mouse interface, hand-held electronic equipment, office-automation equipment, and audio and video equipment.
Available in sizes 3 through 8 contact, the Cinch Mini Din family includes a fully shielded cable mounted plug in various cable
lengths or cable mounted plug components for customers with high-volume assembly and overmold capabilities.
Cinch Edge Card Connectors are available in a variety of styles on both .100 or .156 center spacing.
The newest addition to the commercial family, the 75ΩPress-Fit BNC Receptacle is designed around a unique patented press-fit
design that allows for multiple insertion into a backplane without loss of mechanical retention or electrical performance.
When looking for time reliability to solve your commercial interconnect needs, look no further than Cinch Connectors.
Whether it's a Jones Plug and Socket, Barrier Block, Edge Card, Mini Din plug, or our newest addition,
the 75ΩBNC Press-Fit connector, you will always know years of customer satisfaction stand behind the product you chose.
2-2
Call Toll Free: 1 (800) 323-9612
Barrier Blocks
FEATURES
■
Interposing barriers between terminals yield higher electrical ratings and provide additional
protection against frayed wire shorting.
■
A wide variety of barrier blocks makes it possible to select the combination of mechanical and
electrical characteristics that best meet the exact requirements of your application.
■
A wide selection of optional terminals and fanning strips permits the equipment designer to
choose the method of termination most suitable for his environmental specifications and
manufacturing requirements.
MATERIALS
Insulation Material: Molded monoblock, general purpose
phenolic, black, UL Rated 94V-1
Eyelets: Material - Brass
Plating - Nickel
Screws: Material - Steel
Plating - Nickel over copper flash
Solder Terminals: Material - Brass
Plating - Electro-Tin
Marker Strip Material: Nema Grade XPC, UL Rated 94V-O
ENVIRONMENTAL
Operating Temperature: -55° to +300°F
Certifications: UL Recognized - File E61245
CSA - LR 31996
Marketed exclusively through distribution.
2-3 Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Center-to- Number Single or Max. Max. Voltage Voltage Marker
Center of Double Screw Operating Current Wire Watts/ Rating Rating Strip
Series Spacing Terminals Row Size Voltage Rating Size Terminal w/Marker w/o Marker Mounting
140 .375 1-25 Double 5-40 250 Volts 15 Amps #16 3750 2000 1100 Bottom
141 .438 1-20 Double 6-32 250 Volts 20 Amps #14 5000 2400 1100 Bottom
142 .563 1-17 Double 8-32 250 Volts 30 Amps #10 7500 2600 1600 Bottom
150 .688 1-10 Double 10-32 250 Volts 40 Amps #10 10,000 2400 1500 Bottom
151 .875 1-8 Double 12-32 250 Volts 50 Amps #8 12,500 3400 1800 Bottom
152 1.125 1-6 Double 1/4-28 250 Volts 70 Amps #6 54,000 3800 2100 Bottom
164 .375 1-21 Double 6-32 250 Volts 15 Amps #14 3750 2000 1100 Bottom
540 .375 2-31 Double 5-40 600 Volts 15 Amps #16 3750 2300 2300 Top
541 .438 2-30 Double 6-32 600 Volts 20 Amps #14 5000 2800 2800 Top
542 .563 2-26 Double 8-32 600 Volts 30 Amps #10 7500 4000 4000 Top
176 .375 2-10 Single 5-40 250 Volts 15 Amps #16 3750 N/A 1100 N/A
TERMINAL BLOCK QUICK REFERENCE
Marketed exclusively through distribution.
Barrier Blocks
Series 140
Electrical Characteristics
Voltage Rating: 250 VAC RMS maximum
Current Rating: 15 Amps maximum
Maximum Watts Per Terminal: 3750
Mechanical Characteristics
Maximum Wire Size: #16 AWG
Recommended Tightening Torque: 9 lb.-in.
Dimensions
No. of Standard Screw “M” “L”
Terminals Catalog No. Dim. Dim.
1 1-140 .750 1.032
2 2-140 1.125 1.407
3 3-140 1.500 1.782
4 4-140 1.875 2.157
5 5-140 2.250 2.532
6 6-140 2.625 2.907
7 7-140 3.000 3.282
8 8-140 3.375 3.657
9 9-140 3.750 4.032
10 10-140 4.125 4.407
11 11-140 4.500 4.782
12 12-140 4.875 5.157
13 13-140 5.250 5.532
14 14-140 5.625 5.907
15 15-140 6.000 6.282
16 16-140 6.375 6.657
17 17-140 6.750 7.032
18 18-140 7.125 7.407
19 19-140 7.500 7.782
20 20-140 7.875 8.157
21 21-140 8.250 8.532
22 22-140 8.625 8.907
23 23-140 9.000 9.282
24 24-140 9.375 9.657
25 25-140 9.750 10.032
.375 Density, 5-40 x 3/16"
BH Screw, Open Bottom,
Double Row
2-4
Call Toll Free: 1 (800) 323-9612 Marketed exclusively through distribution.
Ordering Information
2-5
Barrier Blocks
Series 140
.375 Density, 5-40 x 3/16"
BH Screw, Open Bottom,
Double Row
Call Toll Free: 1 (800) 323-9612
Solder Terminal Options
Dimensions
“Y” Terminals “3/4W” Terminals “W” Terminals
Terminal Type
“Y”
“3/4W”
“W”
Catalog No.
Y-140
3/4W-140
W-140
Marketed exclusively through distribution.
No. of
Terminals Catalog No. Catalog No. Catalog No.
1 1-140-Y 1-140-3/4W 1-140-W
2 2-140-Y 2-140-3/4W 2-140-W
3 3-140-Y 3-140-3/4W 3-140-W
4 4-140-Y 4-140-3/4W 4-140-W
5 5-140-Y 5-140-3/4W 5-140-W
6 6-140-Y 6-140-3/4W 6-140-W
7 7-140-Y 7-140-3/4W 7-140-W
8 8-140-Y 8-140-3/4W 8-140-W
9 9-140-Y 9-140-3/4W 9-140-W
10 10-140-Y 10-140-3/4W 10-140-W
11 11-140-Y 11-140-3/4W 11-140-W
12 12-140-Y 12-140-3/4W 12-140-W
13 13-140-Y 13-140-3/4W 13-140-W
14 14-140-Y 14-140-3/4W 14-140-W
15 15-140-Y 15-140-3/4W 15-140-W
16 16-140-Y 16-140-3/4W 16-140-W
17 17-140-Y 17-140-3/4W 17-140-W
18 18-140-Y 18-140-3/4W 18-140-W
19 19-140-Y 19-140-3/4W 19-140-W
20 20-140-Y 20-140-3/4W 20-140-W
21 21-140-Y 21-140-3/4W 21-140-W
22 22-140-Y 22-140-3/4W 22-140-W
23 23-140-Y 23-140-3/4W 23-140-W
24 24-140-Y 24-140-3/4W 24-140-W
25 25-140-Y 25-140-3/4W 25-140-W
Solder Terminals can be ordered separately.
Ordering Information
2-6
Call Toll Free: 1 (800) 323-9612
2
Barrier Blocks
Series 140
.375 Density, 5-40 x 3/16"
BH Screw, Open Bottom,
Double Row
Marker Strips
Dimensions
Standard “Y” Terminal
Marketed exclusively through distribution.
No. of
Terminals Catalog No. Catalog No.
1 MS-1-140 MS-1-140-Y
2 MS-2-140 MS-2-140-Y
3 MS-3-140 MS-3-140-Y
4 MS-4-140 MS-4-140-Y
5 MS-5-140 MS-5-140-Y
6 MS-6-140 MS-6-140-Y
7 MS-7-140 MS-7-140-Y
8 MS-8-140 MS-8-140-Y
9 MS-9-140 MS-9-140-Y
10 MS-10-140 MS-10-140-Y
11 MS-11-140 MS-11-140-Y
12 MS-12-140 MS-12-140-Y
13 MS-13-140 MS-13-140-Y
14 MS-14-140 MS-14-140-Y
15 MS-15-140 MS-15-140-Y
16 MS-16-140 MS-16-140-Y
17 MS-17-140 MS-17-140-Y
18 MS-18-140 MS-18-140-Y
19 MS-19-140 MS-19-140-Y
20 MS-20-140 MS-20-140-Y
21 MS-21-140 MS-21-140-Y
22 MS-22-140 MS-22-140-Y
23 MS-23-140 MS-23-140-Y
24 MS-24-140 MS-24-140-Y
25 MS-25-140 MS-25-140-Y
Use Standard Marker Strips for “3/4W” and “W” Solder Terminals.
Accessories
• Jumpers
• Fanning Strips
Ordering Information
Barrier Blocks
Series 141
.438 Density, 6-32 x 1/4"
BH Screw, Open Bottom,
Double Row
Electrical Characteristics
Voltage Rating: 250 VAC RMS maximum
Current Rating: 20 Amps maximum
Maximum Watts Per Terminal: 5000
Mechanical Characteristics
Maximum Wire Size: #14 AWG
Recommended Tightening Torque: 12 lb.-in.
Dimensions
Ordering Information
Marketed exclusively through distribution.
No. of Standard Screw “M” “L”
Terminals Catalog No. Dim. Dim.
1 1-141 .875 1.187
2 2-141 1.312 1.625
3 3-141 1.750 2.062
4 4-141 2.187 2.500
5 5-141 2.625 2.938
6 6-141 3.062 3.375
7 7-141 3.500 3.812
8 8-141 3.938 4.250
9 9-141 4.375 4.687
10 10-141 4.813 5.125
11 11-141 5.250 5.562
12 12-141 5.687 6.000
13 13-141 6.125 6.437
14 14-141 6.562 6.875
15 15-141 7.000 7.312
16 16-141 7.437 7.750
17 17-141 7.875 8.187
18 18-141 8.312 8.625
19 19-141 8.750 9.062
20 20-141 9.187 9.500
2-8
Call Toll Free: 1 (800) 323-9612
2-9 Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Series 141
.438 Density, 6-32 x 1/4"
BH Screw, Open Bottom,
Double Row
Solder Terminal Options
Dimensions
Ordering Information
Marketed exclusively through distribution.
No. of
Terminals Catalog No. Catalog No. Catalog No.
1 1-141-Y 1-141-3/4W 1-141-W
2 2-141-Y 2-141-3/4W 2-141-W
3 3-141-Y 3-141-3/4W 3-141-W
4 4-141-Y 4-141-3/4W 4-141-W
5 5-141-Y 5-141-3/4W 5-141-W
6 6-141-Y 6-141-3/4W 6-141-W
7 7-141-Y 7-141-3/4W 7-141-W
8 8-141-Y 8-141-3/4W 8-141-W
9 9-141-Y 9-141-3/4W 9-141-W
10 10-141-Y 10-141-3/4W 10-141-W
11 11-141-Y 11-141-3/4W 11-141-W
12 12-141-Y 12-141-3/4W 12-141-W
13 13-141-Y 13-141-3/4W 13-141-W
14 14-141-Y 14-141-3/4W 14-141-W
15 15-141-Y 15-141-3/4W 15-141-W
16 16-141-Y 16-141-3/4W 16-141-W
17 17-141-Y 17-141-3/4W 17-141-W
18 18-141-Y 18-141-3/4W 18-141-W
19 19-141-Y 19-141-3/4W 19-141-W
20 20-141-Y 20-141-3/4W 20-141-W
Solder Terminals can be ordered separately.
Terminal Type Catalog No.
“Y” Y-141
“3/4W” 3/4W-141
“W” W-141
“Y” Terminals “3/4W” Terminals “W” Terminals
2-10
DURA-CON®
High Reliability
All-Plastic
2
Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Series 141
.438 Density, 6-32 x 1/4"
BH Screw, Open Bottom,
Double Row
Marker Strips
Dimensions
Standard “Y” Terminal
Ordering Information
Marketed exclusively through distribution.
No. of
Terminals Catalog No. Catalog No.
1 MS-1-141 MS-1-141-Y
2 MS-2-141 MS-2-141-Y
3 MS-3-141 MS-3-141-Y
4 MS-4-141 MS-4-141-Y
5 MS-5-141 MS-5-141-Y
6 MS-6-141 MS-6-141-Y
7 MS-7-141 MS-7-141-Y
8 MS-8-141 MS-8-141-Y
9 MS-9-141 MS-9-141-Y
10 MS-10-141 MS-10-141-Y
11 MS-11-141 MS-11-141-Y
12 MS-12-141 MS-12-141-Y
13 MS-13-141 MS-13-141-Y
14 MS-14-141 MS-14-141-Y
15 MS-15-141 MS-15-141-Y
16 MS-16-141 MS-16-141-Y
17 MS-17-141 MS-17-141-Y
18 MS-18-141 MS-18-141-Y
19 MS-19-141 MS-19-141-Y
20 MS-20-141 MS-20-141-Y
Use Standard Marker Strip for “3/4W” and “W” Solder Terminals.
Accessories
• Jumpers
• Fanning Strips
2-12
Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Series 142
.563 Density, 8-32 x 5/16"
BH Screw, Open Bottom,
Double Row
Electrical Characteristics
Voltage Rating: 250 VAC RMS maximum
Current Rating: 30 Amps maximum
Maximum Watts Per Terminal: 7500
Mechanical Characteristics
Maximum Wire Size: #10 AWG
Recommended Tightening Torque: 16 lb.-in.
Dimensions
Ordering Information
Marketed exclusively through distribution.
No. of Standard Screw “M” “L”
Terminals Catalog No. Dim. Dim.
1 1-142 1.125 1.531
2 2-142 1.687 2.094
3 3-142 2.250 2.656
4 4-142 2.812 3.219
5 5-142 3.375 3.781
6 6-142 3.937 4.344
7 7-142 4.500 4.906
8 8-142 5.062 5.468
9 9-142 5.625 6.031
10 10-142 6.187 6.594
11 11-142 6.750 7.156
12 12-142 7.312 7.719
13 13-142 7.875 8.281
14 14-142 8.437 8.844
15 15-142 9.000 9.406
16 16-142 9.562 9.969
17 17-142 10.125 10.531
2-13
Barrier Blocks
Series 142
.563 Density, 8-32 x 5/16"
BH Screw, Open Bottom,
Double Row
Call Toll Free: 1 (800) 323-9612
Solder Terminal Options
Dimensions
“Y” Terminals “3/4W” Terminals “W” Terminals
Ordering Information
Marketed exclusively through distribution.
No. of
Terminals Catalog No. Catalog No. Catalog No.
1 1-142-Y 1-142-3/4W 1-142-W
2 2-142-Y 2-142-3/4W 2-142-W
3 3-142-Y 3-142-3/4W 3-142-W
4 4-142-Y 4-142-3/4W 4-142-W
5 5-142-Y 5-142-3/4W 5-142-W
6 6-142-Y 6-142-3/4W 6-142-W
7 7-142-Y 7-142-3/4W 7-142-W
8 8-142-Y 8-142-3/4W 8-142-W
9 9-142-Y 9-142-3/4W 9-142-W
10 10-142-Y 10-142-3/4W 10-142-W
11 11-142-Y 11-142-3/4W 11-142-W
12 12-142-Y 12-142-3/4W 12-142-W
13 13-142-Y 13-142-3/4W 13-142-W
14 14-142-Y 14-142-3/4W 14-142-W
15 15-142-Y 15-142-3/4W 15-142-W
16 16-142-Y 16-142-3/4W 16-142-W
17 17-142-Y 17-142-3/4W 17-142-W
Solder Terminals can be ordered separately.
Terminal Type Catalog No.
“Y” Y-142
“3/4W” 3/4W-142
“W” W-142
Marker Strips
Dimensions
Standard “Y” Terminal
2-14
DURA-CON®
High Reliability
All-Plastic
Barrier Blocks
Series 142
.563 Density, 8-32 x 5/16"
BH Screw, Open Bottom,
Double Row
2
Call Toll Free: 1 (800) 323-9612
Ordering Information
Marketed exclusively through distribution.
No. of
Terminals Catalog No. Catalog No.
1 MS-1-142 MS-1-142-Y
2 MS-2-142 MS-2-142-Y
3 MS-3-142 MS-3-142-Y
4 MS-4-142 MS-4-142-Y
5 MS-5-142 MS-5-142-Y
6 MS-6-142 MS-6-142-Y
7 MS-7-142 MS-7-142-Y
8 MS-8-142 MS-8-142-Y
9 MS-9-142 MS-9-142-Y
10 MS-10-142 MS-10-142-Y
11 MS-11-142 MS-11-142-Y
12 MS-12-142 MS-12-142-Y
13 MS-13-142 MS-13-142-Y
14 MS-14-142 MS-14-142-Y
15 MS-15-142 MS-15-142-Y
16 MS-16-142 MS-16-142-Y
17 MS-17-142 MS-17-142-Y
Use Standard Marker Strips for “3/4W” and “W” Solder Terminals.
Accessories
• Jumpers
• Fanning Strips
2-16
Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Series 150
Electrical Characteristics
Voltage Rating: 250 VAC RMS maximum
Current Rating: 40 Amps maximum
Maximum Watts Per Terminal: 10,000
Mechanical Characteristics
Maximum Wire Size: #10 AWG
Recommended Tightening Torque: 20 lb.-in.
Dimensions
Ordering Information
No. of Standard Screw Y-Terminals “M” “L”
Terminals Catalog No. Catalog No. Dim. Dim.
1 1-150 1-150-Y 1.375 1.812
2 2-150 2-150-Y 2.062 2.500
3 3-150 3-150-Y 2.750 3.187
4 4-150 4-150-Y 3.437 3.875
5 5-150 5-150-Y 4.125 4.562
6 6-150 6-150-Y 4.812 5.250
7 7-150 7-150-Y 5.500 5.938
8 8-150 8-150-Y 6.187 6.625
9 9-150 9-150-Y 6.875 7.312
10 10-150 10-150-Y 7.562 8.000
.688 Density, 10-32 x 5/16"
BH Screw, Open Bottom,
Double Row
Marketed exclusively through distribution.
Barrier Blocks
Series 150
.688 Density, 10-32 x 5/16"
BH Screw, Open Bottom,
Double Row
Marker Strips
Dimensions
Standard “Y” Terminal
Ordering Information
Marketed exclusively through distribution.
.688 TYP
(17.46)
No. of
Terminals Catalog No. Catalog No.
1 MS-1-150 MS-1-150-Y
2 MS-2-150 MS-2-150-Y
3 MS-3-150 MS-3-150-Y
4 MS-4-150 MS-4-150-Y
5 MS-5-150 MS-5-150-Y
6 MS-6-150 MS-6-150-Y
7 MS-7-150 MS-7-150-Y
8 MS-8-150 MS-8-150-Y
9 MS-9-150 MS-9-150-Y
10 MS-10-150 MS-10-150-Y
2-17 Call Toll Free: 1 (800) 323-9612
Accessories
None Available for 150 Series.
2-18
Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Series 151
.875 Density, 12-32 x 3/8"
BH Screw, Open Bottom,
Double Row
Electrical Characteristics
Voltage Rating: 250 Volts maximum
Current Rating: 50 Amps maximum
Maximum Watts Per Terminal: 12,500
Mechanical Characteristics
Maximum Wire Size: #8
Recommended Tightening Torque: 40 lb.-in.
Dimensions
Ordering Information
Marketed exclusively through distribution.
No. of “M” “L” Marker Strip
Terminals Catalog No. Dim. (in) Dim. (in) Catalog No.
1 1-151 1.750 2.282 N/A
2 2-151 2.625 3.157 MS-2-151
3 3-151 3.500 4.032 MS-3-151
4 4-151 4.375 4.907 MS-4-151
5 5-151 5.250 5.782 MS-5-151
6 6-151 6.125 6.657 MS-6-151
7 7-151 7.000 7.532 MS-7-151
8 8-151 7.875 8.407 MS-8-151
Solder Terminals can be ordered separately.
Terminal Type Catalog No.
“W” W-151
2-19 Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Series 152
1.25 Density, 1/4-28 x 1/2"
BH Screw, Open Bottom,
Double Row
Electrical Characteristics
Voltage Rating: 250 Volts maximum
Current Rating: 70 Amps maximum
Maximum Watts Per Terminal: 54,000
Mechanical Characteristics
Maximum Wire Size: #6
Recommended Tightening Torque: 75 lb.-in.
Dimensions
Ordering Information
Marketed exclusively through distribution.
No. of “M” “L” Marker Strip
Terminals Catalog No. Dim. (in) Dim. (in) Catalog No.
1 1-152 2.250 2.876 N/A
2 2-152 3.375 4.001 MS-2-152
3 3-152 4.500 5.126 MS-3-152
4 4-152 5.625 6.251 MS-4-152
5 5-152 6.750 7.376 MS-5-152
6 6-152 7.875 8.501 MS-6-152
Accessories
None Available for 152 Series.
2-20
Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Series 164
.375 Density, 6-32 x 5/16"
BH Screw, Open Bottom,
Double Row
Electrical Characteristics
Voltage Rating: 250 Volts maximum
Current Rating: 15 Amps maximum
Maximum Watts Per Terminal: 3750
Mechanical Characteristics
Maximum Wire Size: #14
Recommended Tightening Torque: 12 lb.-in.
Dimensions
Ordering Information
Marketed exclusively through distribution.
No. of “M” “L”
Terminals Catalog No. Dim. (in) Dim. (in)
1 1-164 0.750 1.032
2 2-164 1.125 1.407
3 3-164 1.500 1.782
4 4-164 1.875 2.157
5 5-164 2.250 2.532
6 6-164 2.625 2.907
7 7-164 3.000 3.282
8 8-164 3.375 3.657
9 9-164 3.750 4.032
10 10-164 4.125 4.407
11 11-164 4.500 4.782
12 12-164 4.875 5.157
13 13-164 5.250 5.532
14 14-164 5.625 5.907
15 15-164 6.000 6.282
16 16-164 6.375 6.657
17 17-164 6.750 7.032
18 18-164 7.125 7.407
19 19-164 7.500 7.782
20 20-164 7.875 8.157
21 21-164 8.250 8.532
Solder Terminal Options
Dimensions
“Y” Terminals “3/4W” Terminals
Ordering Information
2-21 Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Series 164
.375 Density, 6-32 x 1/4"
BH Screw, Open Bottom,
Double Row
“W” Terminals
Marketed exclusively through distribution.
No. of
Terminals Catalog No. Catalog No. Catalog No.
1 1-164-Y 1-164-3/4W 1-164-W
2 2-164-Y 2-164-3/4W 2-164-W
3 3-164-Y 3-164-3/4W 3-164-W
4 4-164-Y 4-164-3/4W 4-164-W
5 5-164-Y 5-164-3/4W 5-164-W
6 6-164-Y 6-164-3/4W 6-164-W
7 7-164-Y 7-164-3/4W 7-164-W
8 8-164-Y 8-164-3/4W 8-164-W
9 9-164-Y 9-164-3/4W 9-164-W
10 10-164-Y 10-164-3/4W 10-164-W
11 11-164-Y 11-164-3/4W 11-164-W
12 12-164-Y 12-164-3/4W 12-164-W
13 13-164-Y 13-164-3/4W 13-164-W
14 14-164-Y 14-164-3/4W 14-164-W
15 15-164-Y 15-164-3/4W 15-164-W
16 16-164-Y 16-164-3/4W 16-164-W
17 17-164-Y 17-164-3/4W 17-164-W
18 18-164-Y 18-164-3/4W 18-164-W
19 19-164-Y 19-164-3/4W 19-164-W
20 20-164-Y 20-164-3/4W 20-164-W
21 21-164-Y 21-164-3/4W 21-164-W
2-22
DURA-CON®
High Reliability
All-Plastic
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
Barrier Blocks
Series 164
.375 Density, 6-32 x 1/4"
BH Screw, Open Bottom,
Double Row
2
Call Toll Free: 1 (800) 323-9612
Marker Strips
Dimensions
Standard “Y” Terminal
Ordering Information
Marketed exclusively through distribution.
No. of
Terminals Catalog No. Catalog No.
1 N/A N/A
2 MS-2-140 MS-2-140-Y
3 MS-3-140 MS-3-140-Y
4 MS-4-140 MS-4-140-Y
5 MS-5-140 MS-5-140-Y
6 MS-6-140 MS-6-140-Y
7 MS-7-140 MS-7-140-Y
8 MS-8-140 MS-8-140-Y
9 MS-9-140 MS-9-140-Y
10 MS-10-140 MS-10-140-Y
11 MS-11-140 MS-11-140-Y
12 MS-12-140 MS-12-140-Y
13 MS-13-140 MS-13-140-Y
14 MS-14-140 MS-14-140-Y
15 MS-15-140 MS-15-140-Y
16 MS-16-140 MS-16-140-Y
17 MS-17-140 MS-17-140-Y
18 MS-18-140 MS-18-140-Y
19 MS-19-140 MS-19-140-Y
20 MS-20-140 MS-20-140-Y
21 MS-21-140 MS-21-140-Y
Use Standard Marker Strips for “3/4W” and “W” Solder Terminals.
2-24
Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Series 540
.375 Density, 5-40 x 1/4"
BH Screw, Closed Bottom,
Double Row
Electrical Characteristics
Voltage Rating: 600 Volts maximum
Current Rating: 15 Amps
Maximum Watts Per Terminal: 3750
Mechanical Characteristics
Maximum Wire Size: #16
Recommended Tightening Torque: 9 lb.-in.
Dimensions
No. of “M” “L” Marker Strip
Terminals Catalog No. Dim. (in) Dim. (in) Catalog No.
2 2-540 1.125 1.407 MSX-2-540
3 3-540 1.500 1.782 MSX-3-540
4 4-540 1.875 2.157 MSX-4-540
5 5-540 2.250 2.532 MSX-5-540
6 6-540 2.625 2.907 MSX-6-540
7 7-540 3.000 3.282 MSX-7-540
8 8-540 3.375 3.657 MSX-8-540
9 9-540 3.750 4.032 MSX-9-540
10 10-540 4.125 4.407 MSX-10-540
11 11-540 4.500 4.782 MSX-11-540
12 12-540 4.875 5.157 MSX-12-540
13 13-540 5.250 5.532 MSX-13-540
14 14-540 5.625 5.907 MSX-14-540
15 15-540 6.000 6.282 MSX-15-540
16 16-540 6.375 6.657 MSX-16-540
17 17-540 6.750 7.032 MSX-17-540
18 18-540 7.125 7.407 MSX-18-540
19 19-540 7.500 7.782 MSX-19-540
20 20-540 7.875 8.157 MSX-20-540
21 21-540 8.250 8.532 MSX-21-540
22 22-540 8.625 8.907 MSX-22-540
23 23-540 9.000 9.282 MSX-23-540
24 24-540 9.375 9.657 MSX-24-540
25 25-540 9.750 10.032 MSX-25-540
26 26-540 10.125 10.407 MSX-26-540
27 27-540 10.500 10.782 MSX-27-540
28 28-540 10.875 11.157 MSX-28-540
29 29-540 11.250 11.532 MSX-29-540
30 30-540 11.625 11.907 MSX-30-540
31 31-540 12.000 12.282 MSX-31-540
Marketed exclusively through distribution.
Ordering Information
2-25 Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Series 541
Electrical Characteristics
Voltage Rating: 600 Volts maximum
Current Rating: 20 Amps
Maximum Watts Per Terminal: 5000
Mechanical Characteristics
Maximum Wire Size: #14
Recommended Tightening Torque: 12 lb.-in.
Dimensions
Ordering Information
Marketed exclusively through distribution.
No. of “M” “L” Marker Strip
Terminals Catalog No. Dim. (in) Dim. (in) Catalog No.
2 2-541 1.314 1.626 MSX-2-541
3 3-541 1.752 2.064 MSX-3-541
4 4-541 2.190 2.502 MSX-4-541
5 5-541 2.628 2.940 MSX-5-541
6 6-541 3.066 3.378 MSX-6-541
7 7-541 3.504 3.816 MSX-7-541
8 8-541 3.942 4.254 MSX-8-541
9 9-541 4.380 4.692 MSX-9-541
10 10-541 4.818 5.130 MSX-10-541
11 11-541 5.256 5.568 MSX-11-541
12 12-541 5.694 6.006 MSX-12-541
13 13-541 6.132 6.444 MSX-13-541
14 14-541 6.570 6.882 MSX-14-541
15 15-541 7.008 7.320 MSX-15-541
16 16-541 7.446 7.758 MSX-16-541
17 17-541 7.884 8.196 MSX-17-541
18 18-541 8.322 8.634 MSX-18-541
19 19-541 8.760 9.072 MSX-19-541
20 20-541 9.198 9.510 MSX-20-541
21 21-541 9.636 9.948 MSX-21-541
22 22-541 10.074 10.386 MSX-22-541
23 23-541 10.512 10.824 MSX-23-541
24 24-541 10.950 11.262 MSX-24-541
25 25-541 11.388 11.700 MSX-25-541
26 26-541 11.826 12.138 MSX-26-541
27 27-541 12.264 12.576 MSX-27-541
28 28-541 12.702 13.014 MSX-28-541
29 29-541 13.140 13.452 MSX-29-541
30 30-541 13.578 13.890 MSX-30-541
.438 Density, 6-32 x 1/4"
BH Screw, Closed Bottom,
Double Row
2-26
Call Toll Free: 1 (800) 323-9612
Barrier Blocks
Series 542
.563 Density, 8-32 x 5/16"
BH Screw, Closed Bottom,
Double Row
Electrical Characteristics
Voltage Rating: 600 Volts maximum
Current Rating: 30 Amps
Maximum Watts Per Terminal: 7500
Mechanical Characteristics
Maximum Wire Size: #10
Recommended Tightening Torque: 16 lb.-in.
Dimensions
Ordering Information
Marketed exclusively through distribution.
No. of “M” “L” Marker Strip
Terminals Catalog No. Dim. (in) Dim. (in) Catalog No.
2 2-542 1.689 2.095 MSX-2-542
3 3-542 2.252 2.658 MSX-3-542
4 4-542 2.815 3.221 MSX-4-542
5 5-542 3.378 3.784 MSX-5-542
6 6-542 3.941 4.347 MSX-6-542
7 7-542 4.504 4.910 MSX-7-542
8 8-542 5.067 5.473 MSX-8-542
9 9-542 5.630 6.036 MSX-9-542
10 10-542 6.193 6.599 MSX-10-542
11 11-542 6.756 7.162 MSX-11-542
12 12-542 7.319 7.725 MSX-12-542
13 13-542 7.882 8.288 MSX-13-542
14 14-542 8.445 8.851 MSX-14-542
15 15-542 9.008 9.414 MSX-15-542
16 16-542 9.571 9.977 MSX-16-542
17 17-542 10.134 10.540 MSX-17-542
18 18-542 10.697 11.103 MSX-18-542
19 19-542 11.260 11.666 MSX-19-542
20 20-542 11.823 12.229 MSX-20-542
21 21-542 12.386 12.792 MSX-21-542
22 22-542 12.949 13.355 MSX-22-542
23 23-542 13.512 13.918 MSX-23-542
24 24-542 14.075 14.481 MSX-24-542
25 25-542 14.638 15.044 MSX-25-542
26 26-542 15.201 15.607 MSX-26-542
2-27 Call Toll Free: 1 (800) 323-9612
Electrical Characteristics
Voltage Rating: 250 Volts maximum
Current Rating: 15 Amps maximum
Maximum Watts Per Terminal: 3750
Mechanical Characteristics
Maximum Wire Size: 16 AWG
Recommended Tightening Torque: 16 lb.-in.
Dimensions
Barrier Blocks
Series 176
.375 Density, 5-40 x 3/16"
BH Screw, Dip Solder,
Single Row
M
L
Ordering Information
With Mounting Ears
No. of Catalog No. Catalog No. “M” “L”
Terminals .125 Tail Lgth .184 Tail Lgth Dimension Dimension
2 2-176-2 2-176-3 1.125 1.469
3 3-176-2 3-176-3 1.500 1.844
4 4-176-2 4-176-3 1.875 2.219
5 5-176-2 5-176-3 2.250 2.594
6 6-176-2 6-176-3 2.625 2.969
7 7-176-2 7-176-3 3.000 3.344
8 8-176-2 8-176-3 3.375 3.719
9 9-176-2 9-176-3 3.375 4.094
10 10-176-2 10-176-3 4.125 4.469
Without Mounting Ears
No. of Catalog No. Catalog No. “L”
Terminals .125 Tail Lgth .184 Tail Lgth Dimension
2 2-176-2A 2-176-3A .719
3 3-176-2A 3-176-3A 1.094
4 4-176-2A 4-176-3A 1.469
5 5-176-2A 5-176-3A 1.844
6 6-176-2A 6-176-3A 2.219
7 7-176-2A 7-176-3A 2.594
8 8-176-2A 8-176-3A 2.969
9 9-176-2A 9-176-3A 3.344
10 10-176-2A 10-176-3A 3.719
11 11-176-2A 11-176-3A 4.094
12 12-176-2A 12-176-3A 4.469
Marketed exclusively through distribution.
2-28
Call Toll Free: 1 (800) 323-9612
2
DURA-CON®
High Reliability
All-Plastic
Barrier Blocks
Accessories
"3/4 W" Terminals - Dimensions
Catalog A B C D E F
Number in mm in mm in mm in mm in mm in mm
3/4W-140 .953 24.21 .719 18.20 .312 7.92 .062 1.57 .146 3.71 .094 2.39
3/4W-141 1.156 29.36 .680 17.27 .422 10.72 .078 1.98 .152 3.86 .125 3.18
3/4W-142 1.422 36.11 .797 20.24 .500 12.70 .094 2.39 .177 4.50 .125 3.18
"W" Terminals - Dimensions
Catalog A B C D E F
Number in mm in mm in mm in mm in mm in mm
W-140 1.219 30.96 .750 19.05 .312 7.92 .063 1.60 .146 3.71 .094 2.39
W-141 1.563 39.70 .938 23.83 .422 10.72 .078 1.98 .152 3.86 .125 3.18
W-142 1.875 47.63 1.094 27.79 .500 12.70 .094 2.39 .177 4.50 .125 3.18
"Y" Terminals - Dimensions
Catalog A B C D E F
Number in mm in mm in mm in mm in mm in mm
Y-140 .281 7.14 .500 12.70 .136 3.45 .593 15.06 .093 2.36 .091 2.31
Y-141 .312 7.92 .625 15.88 .152 3.86 .781 19.83 .125 3.18 .103 2.62
Y-142 .421 10.69 .734 18.64 .177 4.50 .906 23.01 .125 3.18 .126 3.20
Ordering Information
Marketed exclusively through distribution.
Solder Terminals
3/4W, Y, and W
Optional Terminals for use with Cinch terminal blocks.
See chart for type and dimensions. (Below)
Quick Clamp Terminals
Simplifies engaging of wires to barrier blocks.
Wire is inserted into flared opening and screw
is tightened. Screws are brass binder head
type with nickel plating. Terminals are brass
with tin plating. Includes two mating clamps
and one screw.
Ordering Information
Barrier Block Screw Wire Gauge
Series Catalog No. Size Range AWG
141, 541 QC-1 6-32x5/16" 12 thru 22
142, 542 QC-2 8-32x3/8" 10 thru 16
Jumpers
For connecting between adjacent terminals
or alternate terminals. All jumpers are
brass with nickel plating.
Ordering Information
Barrier Block
Series Type Catalog No.
140 A 140J-1
141 B 141J-1
141 F 141J
142 F 95B
142, 542 D 142J-1*
142, 542 E 142J-2
540 C 540J
541 C 541J
542 C 542J
* Connects two alternate terminals
2
2-29
Barrier Blocks
Accessories
Type A Type C
QC-1
Shown
Type F
Type E
Type B
Type D
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-30
Call Toll Free: 1 (800) 323-9612
Barrier Block
Accessories
FEATURES
■
Minimize wiring errors.
■
Available in straight and right-angle styles.
■
Available with cable clamp hole on right or left side, designated
by “L” or “R” at end of catalog number.
■
Cable clamp hole for securing cable/wires with lacing twine
or ty-wrap.
Fanning Strips
MATERIALS
Insulation Material: UL 94HB rated XPC, chocolate
Contact Material: Brass
Contact Plating: Cadmium
Marketed exclusively through distribution.
2-31
Barrier Block
Accessories Fanning Strips
Call Toll Free: 1 (800) 323-9612
Catalog Numbers and Dimensions for Fanning Strips for 140 Series Terminal Blocks
Straight Type
Ordering Information
No. of
Terminals Catalog No. Catalog No. Catalog No. Catalog No.
2 2-160-R 2-160-L 2-160B-R 2-160B-L
3 3-160-R 3-160-L 3-160B-R 3-160B-L
4 4-160-R 4-160-L 4-160B-R 4-160B-L
5 5-160-R 5-160-L 5-160B-R 5-160B-L
6 6-160-R 6-160-L 6-160B-R 6-160B-L
7 7-160-R 7-160-L 7-160B-R 7-160B-L
8 8-160-R 8-160-L 8-160B-R 8-160B-L
9 9-160-R 9-160-L 9-160B-R 9-160B-L
10 10-160-R 10-160-L 10-160B-R 10-160B-L
11 11-160-R 11-160-L 11-160B-R 11-160B-L
12 12-160-R 12-160-L 12-160B-R 12-160B-L
13 13-160-R 13-160-L 13-160B-R 13-160B-L
14 14-160-R 14-160-L 14-160B-R 14-160B-L
15 15-160-R 15-160-L 15-160B-R 15-160B-L
16 16-160-R 16-160-L 16-160B-R 16-160B-L
17 17-160-R 17-160-L 17-160B-R 17-160B-L
18 18-160-R 18-160-L 18-160B-R 18-160B-L
19 19-160-R 19-160-L 19-160B-R 19-160B-L
20 20-160-R 20-160-L 20-160B-R 20-160B-L
21 21-160-R 21-160-L 21-160B-R 21-160B-L
Catalog No. 6-160-R Catalog No. 6-160B-R
Marketed exclusively through distribution.
Dimensions
2-32
DURA-CON®
High Reliability
All-Plastic
Fanning Strips
Barrier Block
Accessories Fanning Strips
2
Call Toll Free: 1 (800) 323-9612
Catalog Numbers and Dimensions for Fanning Strips for 140 Series Terminal Blocks, Continued
Right-Angle Type
Ordering Information
Catalog No. 6-160A-R
No. of
Terminals Catalog No. Catalog No.
2 2-160A-R 2-160A-L
3 3-160A-R 3-160A-L
4 4-160A-R 4-160A-L
5 5-160A-R 5-160A-L
6 6-160A-R 6-160A-L
7 7-160A-R 7-160A-L
8 8-160A-R 8-160A-L
9 9-160A-R 9-160A-L
10 10-160A-R 10-160A-L
11 11-160A-R 11-160A-L
12 12-160A-R 12-160A-L
13 13-160A-R 13-160A-L
14 14-160A-R 14-160A-L
15 15-160A-R 15-160A-L
16 16-160A-R 16-160A-L
17 17-160A-R 17-160A-L
18 18-160A-R 18-160A-L
19 19-160A-R 19-160A-L
20 20-160A-R 20-160A-L
21 21-160A-R 21-160A-L
Marketed exclusively through distribution.
Dimensions
2
2-33
Barrier Block
Accessories Fanning Strips
Catalog Numbers and Dimensions for Fanning Strips for 141 Series Terminal Blocks
Straight Type
No. of
Terminals Catalog No. Catalog No.
2 2-161-R 2-161-L
3 3-161-R 3-161-L
4 4-161-R 4-161-L
5 5-161-R 5-161-L
6 6-161-R 6-161-L
7 7-161-R 7-161-L
8 8-161-R 8-161-L
9 9-161-R 9-161-L
10 10-161-R 10-161-L
11 11-161-R 11-161-L
12 12-161-R 12-161-L
13 13-161-R 13-161-L
14 14-161-R 14-161-L
15 15-161-R 15-161-L
16 16-161-R 16-161-L
17 17-161-R 17-161-L
18 18-161-R 18-161-L
19 19-161-R 19-161-L
20 20-161-R 20-161-L
Right-Angle Type
No. of
Terminals Catalog No. Catalog No.
2 2-161A-R 2-161A-L
3 3-161A-R 3-161A-L
4 4-161A-R 4-161A-L
5 5-161A-R 5-161A-L
6 6-161A-R 6-161A-L
7 7-161A-R 7-161A-L
8 8-161A-R 8-161A-L
9 9-161A-R 9-161A-L
10 10-161A-R 10-161A-L
11 11-161A-R 11-161A-L
12 12-161A-R 12-161A-L
13 13-161A-R 13-161A-L
14 14-161A-R 14-161A-L
15 15-161A-R 15-161A-L
16 16-161A-R 16-161A-L
17 17-161A-R 17-161A-L
18 18-161A-R 18-161A-L
19 19-161A-R 19-161A-L
20 20-161A-R 20-161A-L
Catalog No. 5-161A-R
Catalog No. 5-161-R
Marketed exclusively through distribution.
Dimensions
Dimensions
Call Toll Free: 1 (800) 323-9612
2-34
Call Toll Free: 1 (800) 323-9612
Barrier Block
Accessories
Catalog Numbers and Dimensions for Fanning Strips for 142 Series Barrier Blocks
Straight Type
Ordering Information
No. of
Terminals Catalog No. Catalog No.
2 2-162-R 2-162-L
3 3-162-R 3-162-L
4 4-162-R 4-162-L
5 5-162-R 5-162-L
6 6-162-R 6-162-L
7 7-162-R 7-162-L
8 8-162-R 8-162-L
9 9-162-R 9-162-L
10 10-162-R 10-162-L
11 11-162-R 11-162-L
12 12-162-R 12-162-L
13 13-162-R 13-162-L
14 14-162-R 14-162-L
15 15-162-R 15-162-L
16 16-162-R 16-162-L
17 17-162-R 17-162-L
Right-Angle Type
Ordering Information
No. of
Terminals Catalog No. Catalog No.
2 2-162A-R 2-162A-L
3 3-162A-R 3-162A-L
4 4-162A-R 4-162A-L
5 5-162A-R 5-162A-L
6 6-162A-R 6-162A-L
7 7-162A-R 7-162A-L
8 8-162A-R 8-162A-L
9 9-162A-R 9-162A-L
10 10-162A-R 10-162A-L
11 11-162A-R 11-162A-L
12 12-162A-R 12-162A-L
13 13-162A-R 13-162A-L
14 14-162A-R 14-162A-L
15 15-162A-R 15-162A-L
16 16-162A-R 16-162A-L
17 17-162A-R 17-162A-L
Catalog No. 5-162A-R
Fanning Strips
Catalog No. 5-162-R
Marketed exclusively through distribution.
Dimensions
Dimensions
2-35 Call Toll Free: 1 (800) 323-9612
Barrier Block
Accessories
Materials
Insulation Material: UL 94 HB rated XPC, chocolate
Contact Material: Steel
Contact Plating: Cadmium
Mechanical Characteristics
Mounting Hole: .140" (3.56mm) diameter
Strip Dimension: .0625" (1.59mm) thick x .375" (9.53mm) wide
Lug Density: .375" (9.53mm)
Ordering Information
Mounting Lug Type Used In Position
Catalog No. Centers 1 2 3 4 5 6 7 8
51 - 1 2
51A - 1 4
51B - 2 1
51C - 4 1
51F - 1/2
51L - 3 1
51R - 1 3
52 - 1 2 1
52A - 1 4 1
52B - 2 1 1
52C - 4 1 1
52R - 1 1 3
53 1.500 (38.10) 2 1 1 1 2
53A 1.500 (38.10) 4 1 1 1 4
53B .750 (19.05) 1 2 1 2 1
53C .750 (19.05) 1 4 1 4 1
53E - 1 2 1 1
53F - 1 4 1 1
54 1.875 (47.63) 2 1 1 1 1 2
54A 1.875 (47.63) 4 1 1 1 1 4
54B - 1 1 2 1 1
54C - 1 1 4 1 1
55 2.250 (57.15) 2 1 1 1 1 1 2
55A 2.250 (57.15) 4 1 1 1 1 1 4
55B 1.500 (38.10) 1 2 1 1 1 2 1
55C 1.500 (38.10) 1 4 1 1 1 4 1
56 2.625 (66.68) 2 1 1 1 1 1 1 2
56A 2.625 (66.68) 4 1 1 1 1 1 1 4
56B 1.875 (47.63) 1 2 1 1 1 1 2 1
56C 1.875 (47.63) 1 4 1 1 1 1 4 1
Lug-Type Terminal Strips
Marketed exclusively through distribution.
Dimensions
2-36
Call Toll Free: 1 (800) 323-9612
Jones
Plugs/Sockets
Series 300
FEATURES
■
Solder lug terminals with .093" x .062" (2.36mm x 1.57mm) wiring holes.
■
Two-contact "Jones" connector is round, all others are rectangular.
■
For use in cable-to-panel and cable-to-cable applications.
■
Designed for light and medium duty.
■
Plug prongs are .156" (3.96mm) wide and .047" (1.19mm) thick.
■
Polarized to prevent wrong-way insertion.
■
Plugs have projecting flat blades, sockets have recessed twin bellows.
■
Cable clamps of zinc and clear irridite-plated steel used for strain relief.
■
UL Recognized-file E170218 (UL 1977), E130965 (UL1863).
■
CSA-LR31996.
■
See Panel Cutout dimension on page (2-38).
Multiple Density
Solder Eyelet
MATERIALS
Insulation Material: Molded monoblock, general purpose
phenolic, black UL94V-1
Contact Material: Plug: Brass
Socket: Phosphor bronze
Contact Plating: Cadmium
Operating Temperature: Up to +105°C
Hood Material: UL 94V-0 rated thermoplastic
ELECTRICAL
Operating Voltage: 250 VAC RMS maximum
Current Rating: 10 Amps
Contact Resistance: 16 Milliohms maximum
Marketed exclusively through distribution.
2-37 Call Toll Free: 1 (800) 323-9612
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
Polarizing Patterns - 300 Series
Marketed exclusively through distribution.
2-38
DURA-CON®
High Reliability
All-Plastic
2
Call Toll Free: 1 (800) 323-9612
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
Mounting Dimensions
A B C D
Reference in mm in mm in mm in mm
303 .453 11.51 1.016 25.81 .750 19.05 - -
304 .719 18.26 .781 19.84 1.000 25.40 - -
306 .719 18.26 1.031 26.19 1.000 25.40 - -
308 .719 18.26 1.281 32.54 1.000 25.40 - -
310 .719 18.26 1.578 40.08 1.000 25.40 - -
312 .953 24.21 1.266 32.16 1.250 31.75 - -
315-12 .953 24.21 1.516 38.51 1.250 31.75 - -
315 1.016 25.81 1.641 41.68 1.375 34.93 - -
318 1.016 25.81 1.953 49.61 1.375 34.93 .625 15.88
321 1.016 25.81 2.266 57.56 1.375 34.93 .469 11.91
324 1.016 25.81 2.578 65.48 1.375 34.93 .625 15.88
327 1.016 25.81 2.891 73.43 1.375 34.93 .781 19.84
330 1.016 25.81 3.203 81.36 1.375 34.93 .938 23.83
333 1.016 25.81 3.516 89.31 1.375 34.93 1.094 27.79
NOTE: For 300 Series 2 through 33 contact angle bracket connectors. All mounting holes are .156" (3.96mm) dia. Maximum chassis
thickness is .063" (1.59mm) for bottom mounting. Mounting holes are located on center line unless otherwise shown.
Marketed exclusively through distribution.
2-39 Call Toll Free: 1 (800) 323-9612
2
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet With Angle
Bracket/Less Angle Bracket
No. of A B C D
Contacts in mm in mm in mm in mm
2 .656 16.67 - - .969 24.61 1.219 30.96
3 1.000 25.40 .438 11.11 .750 19.05 1.062 26.99
4 .750 19.05 .688 17.46 1.000 25.40 1.312 33.34
6 1.000 25.40 .688 17.46 1.000 25.40 1.312 33.34
8 -- -- -- -- -- -- -- --
10 1.562 39.69 .688 17.46 1.000 25.40 1.312 33.34
12 1.250 31.75 .938 23.81 1.250 31.75 1.562 39.69
15* 1.500 38.10 .938 23.81 1.250 31.75 1.562 39.69
*Special 15 contact arrangement to allow 12-position mating.
L M Polarizing
Reference in mm in mm Pin
15 1.625 41.28 See note - NO
18 1.938 49.23 1.250 31.75 NO
21 2.250 57.15 .938 23.81 NO
24 2.563 65.10 1.250 31.75 14
27 2.875 73.03 1.562 39.69 14
30 3.188 80.98 1.875 47.63 14
33 3.500 88.90 2.188 55.58 17
NOTE: 15-position plug and socket require only two mounting brackets, mounted on center of connector.
With Angle Bracket Less Angle Bracket
No. of Catalog No. Catalog No. No. of Catalog No. Catalog No.
Contacts Plug Socket Contacts Plug Socket
2 P-302-AB S-302-AB 2 P-302-LAB S-302-LAB
3 P-303-AB S-303-AB 3 P-303-LAB S-303-LAB
4 P-304-AB S-304-AB 4 P-304-LAB S-304-LAB
6 P-306-AB S-306-AB 6 P-306-LAB S-306-LAB
8 N/A N/A 8 N/A N/A
10 P-310-AB N/A 10 P-310-LAB N/A
12 P-312-AB N/A 12 P-312-LAB N/A
15* N/A S-315-12-AB 15 N/A S-315-12-LAB
15 P-315-AB S-315-AB 15 P-315-LAB S-315-LAB
18 P-318-AB S-318-AB 18 P-318-LAB S-318-LAB
21 P-321-AB S-321-AB 21 P-321-LAB S-321-LAB
24 P-324-AB S-324-AB 24 P-324-LAB S-324-LAB
27 P-327-AB S-327-AB 27 P-327-LAB S-327-LAB
30 P-330-AB S-330-AB 30 P-330-LAB S-330-LAB
33 P-333-AB S-333-AB 33 P-333-LAB S-333-LAB
X = length of plug contacts. This dimension does not apply to sockets.
Y = length of plug or socket tails.
Marketed exclusively through distribution.
2-40
DURA-CON®
High Reliability
All-Plastic
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
2
Call Toll Free: 1 (800) 323-9612
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
Flush Plate
300 Series with Flush Plate (FP)
No. of Catalog No. Catalog No.
Contacts Plug Socket
2 P-302-FP S-302-FP
3 P-303-FP S-303-FP
4 P-304-FP S-304-FP
6 P-306-FP S-306-FP
8 N/A N/A
10 P-310-FP N/A
12 P-312-FP N/A
NOTE: Not available in contact sizes 15-33.
Dimensions - Plug or Socket
No. of A B C D E Max.
Contacts in mm in mm in mm in mm in mm
2 2.063 52.40 1.250 31.75 1.750 44.45 - - .719 18.26
3 2.063 52.40 1.250 31.75 1.750 44.45 .938 23.81 .500 12.70
4 2.063 52.40 1.250 31.75 1.750 44.45 .688 17.46 .750 19.05
6 2.063 52.40 1.250 31.75 1.750 44.45 .938 23.81 .750 19.05
8 -- -- -- -- -- -- -- -- -- --
10 2.563 65.10 1.750 44.45 2.250 57.15 1.500 38.10 .750 19.05
12 2.563 65.10 1.750 44.45 2.250 57.15 1.188 30.16 1.000 25.40
Panel Cutout Dimensions
X = length of plug contacts. This dimension does not apply to sockets.
Y = length of plug or socket tails.
A B C
Reference in mm in mm in mm
303-FP .953 24.21 .516 13.11 1.750 44.45
304-FP .703 17.86 .766 19.46 1.750 44.45
306-FP .953 24.21 .766 19.46 1.750 44.45
308-FP -- -- -- -- -- --
310-FP 1.516 38.51 .766 19.46 2.250 57.15
312-FP 1.203 30.56 1.016 25.81 2.250 57.15
Marketed exclusively through distribution.
2-41 Call Toll Free: 1 (800) 323-9612
2
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
End Brackets
300 Series with End Brackets (EB)
No. of Catalog No. Catalog No.
Contacts Plug Socket
15 P-315-EB S-315-EB
18 P-318-EB S-318-EB
21 P-321-EB S-321-EB
24 P-324-EB S-324-EB
28 P-328-EB S-328-EB
30 P-330-EB S-330-EB
33 P-333-EB S-333-EB
NOTE: Not available in contact sizes 2-12.
X = length of plug contacts. This dimension does not apply to sockets.
Y = length of plug or socket tails.
Dimensions
No. of L M P Polarizing
Contacts ±.031 (.79mm) ±.031 (.79mm) ±.063 (1.59mm) Pin
15 2.313 58.75 2.000 50.80 1.625 41.28 NO
18 2.625 66.68 2.313 58.75 1.938 49.23 NO
21 2.938 74.63 2.625 66.68 2.250 57.15 NO
24 3.250 82.55 2.938 74.63 2.563 65.10 14
27 3.563 90.50 3.250 82.55 2.875 73.03 14
30 3.875 98.43 3.563 90.50 3.188 80.98 14
33 4.188 106.38 3.875 98.43 3.500 88.90 17
Panel Cutout Dimensions
A B C
Reference in mm in mm in mm
315-EB 1.641 41.68 1.016 25.81 2.000 50.80
318-EB 1.953 49.61 1.016 25.81 2.313 58.75
321-EB 2.266 57.56 1.016 25.81 2.625 66.68
324-EB 2.578 65.48 1.016 25.81 2.938 74.63
327-EB 2.891 73.43 1.016 25.81 3.250 82.55
330-EB 3.203 81.36 1.016 25.81 3.563 90.50
333-EB 3.516 89.31 1.016 25.81 3.875 98.43
Marketed exclusively through distribution.
2-42
DURA-CON®
High Reliability
All-Plastic
2
Call Toll Free: 1 (800) 323-9612
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
Recessed Plate
300 Series with Recessed Plate (RP)
No. of Catalog No. Catalog No.
Contacts Plug Socket
2 P-302-RP S-302-RP
3 P-303-RP S-303-RP
4 P-304-RP S-304-RP
6 P-306-RP S-306-RP
8 N/A N/A
10 P-310-RP N/A
12 P-312-RP N/A
NOTE: Not available in contact sizes 15-33.
Y = length of plug or socket tails.
Dimensions
No. of A B C D Max.
Contacts in mm in mm in mm in mm
2 2.063 52.40 1.500 38.10 1.750 44.45 1.350 34.29
3 2.063 52.40 1.500 38.10 1.750 44.45 1.350 34.29
4 2.063 52.40 1.500 38.10 1.750 44.45 1.350 34.29
6 2.063 52.40 1.500 38.10 1.750 44.45 1.350 34.29
8 -- -- -- -- -- -- -- --
10 2.563 65.10 2.000 50.80 2.250 57.15 1.850 46.99
12 2.563 65.10 2.000 50.80 2.250 57.15 1.850 46.99
Marketed exclusively through distribution.
2-43
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
2
Call Toll Free: 1 (800) 323-9612
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
Shallow Bracket
300 Series with Shallow Bracket (SB)
No. of Catalog No. Catalog No.
Contacts Plug Socket
15 P-315-SB S-315-SB
18 P-318-SB S-318-SB
21 P-321-SB S-321-SB
24 P-324-SB S-324-SB
27 P-327-SB S-327-SB
30 P-330-SB S-330-SB
33 P-333-SB S-333-SB
NOTE: Not available in contact sizes 2-12.
Dimensions
X = length of plug contacts. This dimension
does not apply to sockets.
Y = length of plug or socket tails.
No. of A M L
Polarizing ±.031 (.79mm) ±.031 (.79mm) ±.063 (1.59mm) Polarizing
Contacts in mm in mm in mm Pin
15 1.688 42.86 2.125 53.98 2.547 64.69 NO
18 2.000 50.80 2.438 61.93 2.859 72.62 NO
21 2.313 58.75 2.750 69.85 3.172 80.57 NO
24 2.625 66.68 2.063 52.40 3.484 88.49 14
27 2.938 74.63 3.375 85.73 3.797 96.44 14
30 3.250 82.55 3.688 93.68 4.109 104.38 14
33 3.563 90.50 4.000 101.60 4.422 112.32 17
A B C
Reference in mm in mm in mm
315-SB 1.750 44.45 1.156 29.36 2.125 53.98
318-SB 2.063 52.40 1.156 29.36 2.438 61.93
321-SB 2.375 60.33 1.156 29.36 2.750 69.85
324-SB 2.688 68.28 1.156 29.36 3.062 77.77
327-SB 3.000 76.20 1.156 29.36 3.376 85.75
330-SB 3.313 84.15 1.156 29.36 3.688 93.68
333-SB 3.625 92.08 1.156 29.36 4.000 101.60
Panel Cutout Dimensions
Marketed exclusively through distribution.
2-44
DURA-CON®
High Reliability
All-Plastic
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
2
Call Toll Free: 1 (800) 323-9612
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
Deep Bracket
300 Series Deep Bracket (DB)
No. of Catalog No. Catalog No.
Contacts Plug Socket
2 P-302-DB S-302-DB
3 P-303-DB S-303-DB
4 P-304-DB S-304-DB
6 P-306-DB S-306-DB
8 N/A N/A
10 N/A N/A
12 P-312-DB N/A
15 P-315-DB S-315-DB
18 P-318-DB S-318-DB
21 P-321-DB S-321-DB
24 P-324-DB S-324-DB
27 P-327-DB S-327-DB
30 P-330-DB S-330-DB
33 P-333-DB S-333-DB
Dimensions Y = length of plug or socket tails.
LM
No. of ±.063 (1.60mm) ±.031 (.79mm) Polarizing
Contacts in mm in mm Pin
15 2.813 71.44 2.375 60.33 NO
18 3.125 79.38 2.688 68.28 NO
21 3.437 87.31 3.000 76.20 NO
24 3.750 95.25 3.313 84.15 14
27 4.063 103.19 3.625 92.08 14
30 4.375 111.13 3.938 100.03 14
33 4.688 119.06 4.250 107.95 17
A B C
Reference in mm in mm in mm
302-DB thru
312-DB 1.453 36.91 1.125 28.58 1.750 38.10
315-DB 2.000 50.80 1.438 36.53 2.376 60.35
318-DB 2.313 58.75 1.438 36.53 2.688 68.28
321-DB 2.625 66.68 1.438 36.53 3.000 76.20
324-DB 2.938 74.63 1.438 36.53 3.312 84.12
327-DB 3.250 82.55 1.438 36.53 3.626 92.10
330-DB 3.562 90.47 1.438 36.53 3.938 100.03
333-DB 3.875 98.43 1.438 36.53 4.250 107.95
Panel Cutout Dimensions
Marketed exclusively through distribution.
2-45 Call Toll Free: 1 (800) 323-9612
2
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
With Hood & 90° Clamp
300 Series with Hood and 90°Cable Clamp (CCE)
No. of Catalog No. Catalog No.
Contacts Plug Socket
2 P-302-CCE S-302-CCE
3 P-303-CCE S-303-CCE
4 P-304-CCE S-304-CCE
6 P-306-CCE S-306-CCE
8 N/A N/A
10 P-310-CCE N/A
12 P-312-CCE N/A
15 P-315-CCE S-315-CCE
18 P-318-CCE S-318-CCE
21 P-321-CCE S-321-CCE
24 P-324-CCE S-324-CCE
27 P-327-CCE S-327-CCE
30 P-330-CCE S-330-CCE
33 P-333-CCE S-333-CCE
Dimensions
A +.016 B +.016 C +.031 G Cable "D"
No. of (.41mm) (.41mm) (.79mm) Opening
Contacts in mm in mm in mm in mm in mm
2 .691 17.55 - - .953 24.21 .313 7.95 .313 7.95
3 1.034 26.26 .472 11.99 .953 24.21 .344 8.74 .250 6.35
4 .786 19.96 .724 18.39 .953 24.21 .453 11.51 .375 9.53
6 1.036 26.31 .724 18.39 .078 27.38 .469 11.91 .438 11.13
8 -- -- -- -- -- -- -- -- -- --
10 1.592 40.44 .720 18.29 1.203 30.56 .359 9.12 .500 12.70
12 1.286 32.66 .974 24.74 1.203 30.56 .422 10.72 .563 14.30
No. of E L Cable Opening Polarizing
Contacts in mm in mm in mm Pin
15 2.514 63.85 1.795 45.59 .563 14.30 NO
18 2.826 71.78 2.107 53.52 .563 14.30 NO
21 3.139 79.73 2.420 61.47 .625 15.88 NO
24 3.451 87.66 2.732 69.39 .625 15.88 14
27 3.764 95.61 3.045 77.34 .625 15.88 14
30 4.076 103.53 3.357 85.27 .750 19.05 14
33 4.389 111.48 3.670 93.22 .750 19.05 17
Marketed exclusively through distribution.
2-46
DURA-CON®
High Reliability
All-Plastic
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
2
Call Toll Free: 1 (800) 323-9612
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
With Hood & 180° Clamp
300 Series with Hood and 180° Cable Clamp (CCT)
No. of Catalog No. Catalog No.
Contacts Plug Socket
2 P-302-CCT S-302-CCT
3 P-303-CCT S-303-CCT
4 P-304-CCT S-304-CCT
6 P-306-CCT S-306-CCT
8 N/A N/A
10 P-310-CCT N/A
12 P-312-CCT N/A
15 P-315-CCT S-315-CCT
18 P-318-CCT S-318-CCT
21 P-321-CCT S-321-CCT
24 P-324-CCT S-324-CCT
27 P-327-CCT S-327-CCT
30 P-330-CCT S-330-CCT
33 P-333-CCT S-333-CCT
Dimensions
A ±.016 B ±.016 C ±.031 “D” Cable E ±.031
No. of (.41mm) (.41mm) (.79mm) Opening (.79mm)
Contacts in mm in mm in mm in mm in mm
2 .691 17.55 - - .953 24.21 .375 9.53 .359 9.12
3 1.034 26.26 .472 11.99 .953 24.21 .313 7.95 .359 9.12
4 .786 19.96 .724 18.39 .953 24.21 .375 9.53 .469 11.91
6 1.036 26.31 .724 18.39 1.078 27.38 .438 11.13 .484 12.29
8 -- -- -- -- -- -- -- -- -- --
10 1.592 40.44 .720 18.29 1.203 30.56 .500 12.70 .500 12.70
12 1.286 32.66 .974 24.74 1.203 30.56 .563 14.30 .469 11.91
No. of L Cable Opening Polarizing
Contacts in mm in mm Pin
15 1.795 45.59 .563 14.30 NO
18 2.107 53.52 .563 14.30 NO
21 2.420 61.47 .625 15.88 NO
24 2.732 69.39 .625 15.88 14
27 3.045 77.34 .625 15.88 14
30 3.357 85.27 .750 19.05 14
33 3.670 93.22 .750 19.05 17
Marketed exclusively through distribution.
2-47 Call Toll Free: 1 (800) 323-9612
2
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
Jones
Plugs/Sockets
Series 300
Multiple Density
Solder Eyelet
180° Clamp w/Locks
300 Series Plug with Hood and Lock (CCT-L) and Socket with Hood and Keeper (CCT-K)
No. of Catalog No. Catalog No.
Contacts Plug w/ Lock Socket w/ Keeper
2 P-302-CCT-L S-302-CCT-K
3 P-303-CCT-L S-303-CCT-K
4 P-304-CCT-L S-304-CCT-K
6 P-306-CCT-L S-306-CCT-K
8 N/A N/A
10 P-310-CCT-L N/A
12 P-312-CCT-L N/A
15 P-315-CCT-L S-315-CCT-K
18 P-318-CCT-L S-318-CCT-K
21 P-321-CCT-L S-321-CCT-K
24 P-324-CCT-L S-324-CCT-K
27 P-327-CCT-L S-327-CCT-K
30 P-330-CCT-L S-330-CCT-K
33 P-333-CCT-L S-333-CCT-K
Dimensions
A ±.016 B ±.016 C ±.031 F “D” Cable
No. of (.41mm) (.41mm) (.79mm) Opening Polarizing
Contacts in mm in mm in mm in mm in mm Pin
2 .691 17.5 - - .953 24.21 .359 9.12 .375 9.53 --
3 1.034 26.26 .472 11.99 .953 24.21 .359 9.12 .313 7.94 --
4 .786 19.96 .724 18.39 .953 24.21 .469 11.91 .375 9.53 --
6 1.036 26.31 .724 18.39 1.078 27.38 .484 12.29 .438 11.13 --
8 -- -- -- -- -- -- -- -- -- -- --
10 1.592 40.44 .720 18.29 1.203 30.56 .500 12.70 .500 12.70 --
12 1.286 32.66 .974 24.74 1.203 30.56 .469 11.91 .563 14.30 --
15 1.795 45.59 1.100 27.94 1.850 46.99 .712 18.08 .563 14.30 NO
18 2.107 53.52 1.100 27.94 1.850 46.99 .712 18.08 .563 14.30 NO
21 2.420 61.47 1.100 27.94 1.850 46.99 .712 18.08 .625 15.88 NO
24 2.732 69.39 1.100 27.94 1.850 46.99 .712 18.08 .625 15.88 14
27 3.045 77.34 1.100 27.94 1.850 46.99 .712 18.08 .625 15.88 14
30 3.357 85.27 1.100 27.94 1.850 46.99 .712 18.08 .750 19.05 14
33 3.670 93.22 1.100 27.94 1.850 46.99 .712 18.08 .750 19.05 17
Marketed exclusively through distribution.
Socket Plug
MOUNTING AB DB FP RP EB SB CCE CCT CCT-L CCT-K LAB
CONFIG.
AB •*•*•*•*• • •
DB ••
FP •*•*•*• • •
RP • • •
EB •*•*•*• • •
SB •*•*•*• • •
CCE • • • • • • • •
CCT • • • • • • • • •
CCT-L •
CCT-K •
LAB • • • • • • • • • • •
•These are recommended configurations.
•* These are possible configurations, but not normally recommended.
NOTE: Cinch layout S315-12 is available only in “AB” or “LAB”.
2-48
DURA-CON®
High Reliability
All-Plastic
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
2
Call Toll Free: 1 (800) 323-9612
Miscellaneous Multiple Density
Solder Eyelet
Replacement Drive Pins for Series 300 Plugs and Sockets with Cable Caps and Clamps
Dimensions Ordering Information
Dim. L
No. of +.005 (.13mm) No. of
Contacts in mm Contacts Catalog No.
2 .687 17.45 2 302R
3 .468 11.89 3 303R
4,6,8,10* .718 18.24 4,6,8,10* 304R
12 .953 28.58 12 312R
15-33* 1.125 28.58 15-33* 333R
*10 contact size and 15 through 33 contact sizes require two pins per unit; all other sizes require only one.
Marketed exclusively through distribution.
SOCKETS
PLUGS
JONES PLUGS AND SOCKETS 300 SERIES MATING CHART
2-50
Jones
Plugs/Sockets
Series 2400
FEATURES
■
For use in cable-to-cable and cable-to-panel applications.
■
Designed for medium duty.
■
Plug prongs are .250" (6.35mm) wide and .055" (1.40mm) thick.
■
Socket contacts have solder eyelet contacts of .093" diameters.
■
Polarized to prevent wrong-way insertion.
■
Plugs have projecting flat blades, sockets have recessed twin bellows.
■
Cable clamps of zinc and clear irridite-plated steel are used for strain relief.
■
Bifurcated bellows socket contact provides four individual flexing surfaces for
maximum contact with the blade.
■
Plugs and sockets have recessed pockets with barriers around the contacts.
■
A shoulder extends around the face (mating) side of both plug and socket
presenting a finished appearance when mounted in bracket or cap.
■
Intermates with existing 400 Series Products on the market.
■
UL Recognized - file - E17021B (UL1977) E130965 (1863).
■
CSA - LR31996-2.
■
Panel cutout dimensions (See page 2-57).
Multiple Density
Solder Eyelet
MATERIALS
Insulation Material: Molded monoblock, general purpose
phenolic, black
Contact Material: Plug: Brass
Socket: Phosphor bronze
Contact Plating: Cadmium
Operating Temperature: Up to +105°C
Hood Material: Formed metal with dielectric liner in hood to
prevent shorting
ELECTRICAL
Operating Voltage: 250 VAC RMS
Current Rating: 15 Amps
Current Resistance: 1.0 Milliohms maximum
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-51
Jones
Plugs/Sockets
Series 2400
Multiple Density
Solder Eyelet
Less Angle Bracket
Dimensions - Plug or Socket
2400 Series Less Angle Bracket
No. of Catalog No. Catalog No.
Contacts Plug Socket
2 N/A S-2402-LAB
4 P-2404-LAB S-2404-LAB
6 P-2406-LAB S-2406-LAB
8 P-2408-LAB S-2408-LAB
10 P-2410-LAB S-2410-LAB
12 P-2412-LAB S-2412-LAB
No. of M L
Contacts in mm in mm
2 .563 14.29 .656 16.67
4 1.000 25.40 1.094 27.78
6 1.438 36.51 1.531 38.89
8 1.875 47.63 1.969 50.01
10 2.313 58.74 2.406 61.12
12 2.750 69.85 1.844 46.83
Socket
Plug
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-52
DURA-CON®
High Reliability
All-Plastic
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
Jones
Plugs/Sockets
Series 2400
Multiple Density
Solder Eyelet
With Angle Bracket
2
Call Toll Free: 1 (800) 323-9612
2400 Series with Angle Bracket
No. of Catalog No. Catalog No.
Contacts Plug Socket
2 N/A S-2402-AB
4 P-2404-AB S-2404-AB
6 P-2406-AB S-2406-AB
8 P-2408-AB S-2408-AB
10 P-2410-AB S-2410-AB
12 P-2412-AB S-2412-AB
Dimensions - Plug or Socket
No. of M L
Contacts in mm in mm
2 .563 14.29 .656 16.67
4 1.000 25.40 1.094 27.78
6 1.438 36.51 1.531 38.89
8 1.875 47.63 1.969 50.01
10 2.313 58.74 2.406 61.12
12 2.750 69.85 2.844 72.24
Plug Socket
Marketed exclusively through distribution.
Panel Cutout dimensions are on page 2-61.
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
2
Jones
Plugs/Sockets
Series 2400
Multiple Density
Solder Eyelet
Shallow Bracket
2-53
2400 Series with Shallow Bracket
No. of Catalog No. Catalog No.
Contacts Plug Socket
2 N/A S-2402-SB
4 P-2404-SB S-2404-SB
6 P-2406-SB S-2406-SB
8 P-2408-SB S-2408-SB
10 P-2410-SB S-2410-SB
12 P-2412-SB S-2412-SB
Dimensions - Plug or Socket
No. of L M R. Max.
Contacts in mm in mm in mm
2 1.500 38.10 1.062 26.99 1.766 19.45
4 1.937 49.21 1.500 38.10 1.234 31.34
6 2.375 60.33 1.938 49.23 1.672 42.47
8 2.813 71.45 2.375 60.33 2.109 53.57
10 3.250 82.55 2.813 71.45 2.547 64.69
12 3.688 93.68 3.250 82.55 2.984 75.80
Plug
Socket
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
Panel Cutout dimensions are on page 2-61.
DURA-CON®
High Reliability
All-Plastic
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
2
2-54
Jones
Plugs/Sockets
Series 2400
Multiple Density
Solder Eyelet
Deep Bracket
2400 Series with Deep Bracket
No. of Catalog No. Catalog No.
Contacts Plug Socket
2 N/A S-2402-DB
4 P-2404-DB S-2404-DB
6 P-2406-DB S-2406-DB
8 P-2408-DB S-2408-DB
10 P-2410-DB S-2410-DB
12 P-2412-DB S-2412-DB
Dimensions - Plug or Socket
No. of B L M
Contacts in mm in mm in mm
2 .922 23.42 1.750 44.45 1.313 33.35
4 1.359 34.53 2.188 55.58 1.750 44.45
6 1.797 45.64 2.625 57.53 2.188 55.58
8 2.234 56.74 3.063 77.79 2.625 66.68
10 2.672 67.87 3.500 88.90 3.063 77.80
12 3.109 78.97 3.938 100.03 3.500 88.90
Panel Cutout dimensions are on page 2-61.
Plug or SocketPlug Socket
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
2
Jones
Plugs/Sockets
Series 2400
Multiple Density
Solder Eyelet
With Hood & 90° Clamp
2-55
2400 Series with Hood and 90° Clamp
No. of Catalog No. Catalog No.
Contacts Plug Socket
2 N/A S-2402-CCE
4 P-2404-CCE S-2404-CCE
6 P-2406-CCE S-2406-CCE
8 P-2408-CCE S-2408-CCE
10 P-2410-CCE S-2410-CCE
12 P-2412-CCE S-2412-CCE
Dimensions - Plug or Socket
No. of L C Cable Opening
Contacts in mm in mm in mm
2 .625 15.88 1.375 34.93 .375 9.53
4 1.062 26.99 1.375 34.93 .438 11.11
6 1.500 38.10 1.375 34.93 .438 11.11
8 1.937 49.21 1.344 34.13 .563 14.29
10 2.375 60.33 1.344 34.13 .563 14.29
12 2.813 71.45 1.312 33.34 .625 15.88
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2400 Series with Hood and 180° Clamp
No. of Catalog No. Catalog No.
Contacts Plug Socket
2 N/A S-2402-CCT
4 P-2404-CCT S-2404-CCT
6 P-2406-CCT S-2406-CCT
8 P-2408-CCT S-2408-CCT
10 P-2410-CCT S-2410-CCT
12 P-2412-CCT S-2412-CCT
Dimensions - Plug or Socket
DURA-CON®
High Reliability
All-Plastic
2
2-56
Jones
Plugs/Sockets
Series 2400
Multiple Density
Solder Eyelet
With Hood & 180° Clamp
No. of L Cable Opening
Contacts in mm in mm
2 .625 15.88 .313 7.94
4 1.062 26.99 .438 11.11
6 1.500 38.10 .438 11.11
8 1.937 49.21 .563 14.29
10 2.375 60.33 .563 14.29
12 2.813 71.45 .625 15.88
Marketed exclusively through distribution.
Plug
Socket
Call Toll Free: 1 (800) 323-9612
2
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
Jones
Plugs/Sockets
Series 2400
Panel Cutout Dimensions
2-57
Panel Cutout Dimensions
Angle Bracket
A B C
Reference in mm in mm in mm
P-2402-AB -- -- -- -- -- --
S-2402-AB 1.188 30.16 1.008 25.60 1.015 25.78
P-2404-AB
S-2404-AB 1.625 41.28 1.445 36.70 1.015 25.78
P-2406-AB
S-2406-AB 2.063 52.40 1.886 47.83 1.015 25.78
P-2408-AB
S-2408-AB 2.500 63.50 2.320 58.93 1.015 25.78
P-2410-AB
S-2410-AB 2.938 74.63 2.758 70.05 1.015 25.78
P-2412-AB
S-2412-AB 3.375 85.73 3.195 81.15 1.015 25.78
Panel Cutout Dimensions
Shallow Bracket
A B C
Reference in mm in mm in mm
P-2402-SB
S-2402-SB 1.062 27.00 .813 20.64 1.156 29.37
P-2404-SB
S-2404-SB 1.500 38.10 1.250 31.75 1.156 29.37
P-2406-SB
S-2406-SB 1.938 49.22 1.688 42.86 1.156 29.37
P-2408-SB
S-2408-SB 2.376 60.34 2.125 53.98 1.156 29.37
P-2410-SB
S-2410-SB 2.812 71.44 2.563 65.10 1.156 29.37
P-2412-SB
S-2412-SB 3.250 82.56 3.000 76.20 1.156 29.37
Panel Cutout Dimensions
Deep Bracket
A B C
Reference in mm in mm in mm
P-2402-DB
S-2402-DB 1.312 33.34 .938 23.81 1.438 36.51
P-2404-DB
S-2404-DB 1.750 44.46 1.375 34.93 1.438 36.51
P-2406-DB
S-2406-DB 2.188 55.56 1.813 46.04 1.438 36.51
P-2408-DB
S-2408-DB 2.624 66.68 2.250 57.15 1.438 36.51
P-2410-DB
P-2410-DB 3.062 77.80 2.688 68.28 1.438 36.51
P-2412-DB
S-2412-DB 3.500 88.90 3.125 79.38 1.438 36.51
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
Circular Mini DIN Plugs
FEATURES
■
Contact positions 3, 4, 5, 6, 7, and 8.
■
Pre-assembled with standard shielded cable lengths; consult factory for other lengths.
■
Molded-in strain relief.
■
Cable and overmold available in standard colors: black or beige.
■
Contacts available with gold over nickel.
■
Shielding system designed to meet FCC requirements for EMI/RFI suppression.
■
UL Recognized - file E170218 (UL1977).
■
CSA Certified - file LR31996-6.
Single-Ended
Cable Assembly
MATERIALS
Insulation Material: Plug Insulator: UL 94V-0 rated nylon
Plug Overmold: PVC (black or beige)
Cable Jacket: PVC (black or beige)
Contact Material: Plug: Phosphor bronze
Contact Plating:
Option 1: Gold Flash over nickel underplate overall
Option 2: Option 1 plus additional gold in mating area for total
thickness of 30µin.
Shield Material: Steel
Shield Plating: Nickel
Standard Cable Shielded cable with 0.197 inch OD
Composition: jacket over 28 AWG stranded wire
conductors. Contact factory for custom
cable requirements.
ELECTRICAL
Voltage Rating: 500 VAC RMS, 707 VDC
Current Rating: 1 Amp at 100 VAC
2 Amps at 12 VDC
Contact Resistance: Contact to contact: 30 milliohms maximum
Shield to shield: 50 milliohms maximum
Insulation Resistance: 500 megohms minimum at 500 VDC
100 megohms minimum after humidity
MECHANICAL
Durability: Withstands 500 mating/unmating cycles
Mating Force: 10 lb. (4.5 kg) maximum
Unmating Force: 1 lb. (0.9 kg) minimum
Contact Retention: 3 lb. minimum
ENVIRONMENTAL
Shock: MIL-STD-202, Method 213, Condition C
Operating Temperature: -40°C to +70°C
Heat Resistance: 196 hrs. at 100°C
Salt Spray: MIL-STD-202, Method 101D, Condition D
Vibration: MIL-STD-202, Method 204, Condition B
Humidity: MIL-STD-202, Method 103, 48 hrs. at 90-95% RH at 40°C
2-58
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
PIN NO COLOR
1 BLACK
2 GREEN
3 RED
4 BROWN
5 BLUE
6 WHITE
7 YELLOW
8 GRAY
2-59
Circular Mini DIN Plugs Single-Ended
Cable Assembly
Ordering Information: (NOTE: One meter = 39.62 inches.)
For cable assemblies with plug on one end. Plug features contacts with Option 1 plating
(gold flash over nickel).
For cable assemblies with plug on one end. Plug features contacts with Option 2 plating (Option 1 with additional
gold in mating area). NOTE: Total gold thickness in mating area is 30 microinches.
Additional Capabilities
• Additional lengths or colors of the above cable assemblies can be produced. Consult factory for custom orders.
• Custom-plated contacts can be provided. Consult factory for information.
3-Contact 4-Contact 5-Contact
6-Contact 8-Contact
7-Contact
Black Color Beige Color
Cable Cable & Cable &
No. of Length Overmold Overmold
Contacts Meter Catalog No. Catalog No.
3 1 MDC-3P05 MDC-3P08
4 1 MDC-4P05 MDC-4P08
4 2 MDC-4P13 MDC-4P53
4 3 MDC-4P15 MDC-4P55
5 1 MDC-5P05 MDC-5P08
6 1 MDC-6P05 MDC-6P08
6 2 MDC-6P13 MDC-6P53
6 3 MDC-6P15 MDC-6P55
7 1 MDC-7P05 MDC-7P08
7 2 MDC-7P13 MDC-7P53
7 3 MDC-7P15 MDC-7P55
8 1 MDC-8P05 MDC-8P08
8 2 MDC-8P13 MDC-8P53
8 3 MDC-8P15 MDC-8P55
The above cable assemblies are highly recommended for general commercial
applications. Contact factory for other lengths or colors.
Black Color Beige Color
Cable Cable & Cable &
No. of Length Overmold Overmold
Contacts Meter Catalog No. Catalog No.
3 1 MDC-3P06 MDC-3P09
4 1 MDC-4P06 MDC-4P09
5 1 MDC-5P06 MDC-5P09
6 1 MDC-6P06 MDC-6P09
7 1 MDC-7P06 MDC-7P09
8 1 MDC-8P06 MDC-8P09
The above cable assemblies are recommended where greater
contact durability is required.
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
Dimensions
2-60
Circular Mini DIN Plugs
FEATURES
■
Individual components available for cable assembly with overmolding.
■
Plug insulator available with contact positions 3, 4, 5, 6, 7, and 8.
■
Seamless shield case is crimped to cable shield; designed to meet
FCC requirements for EMI/RFI suppression.
■
One-piece shield case - no extra ferrules or shields required with
Cinch Shield Crimp Tools.
■
Contacts are crimp style and supplied on reels.
■
Contacts available with gold over nickel in several options.
■
Tools available to facilitate reliable, efficient termination.
■
Terminates 24 to 30 AWG wire.
■
UL Recognized - file E170218 (UL1977).
Plug Components for
Cable Termination
MATERIALS
Insulation Material: Plug Insulator: 94 V-0 rated nylon
Contact Material: Plug: Phosphor bronze
Contact Plating:
Option 1: Gold flash over nickel underplate overall
Option 2: Option 1 plus additional gold in mating area for
total thickness of 30µin.
Option 3: Option 1 plus additional gold in mating area for
total thickness of 50µin.
Shield Case Material: Steel
Shield Case Plating: Nickel
3-Contact 4-Contact 5-Contact
6-Contact 7-Contact 8-Contact
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
Dimensions
2-61
Circular Mini DIN Plugs Plug Components for
Cable Termination
Ordering Information
For each Plug Assembly, the following components are needed: one plug insulator, one shield,
and adequate contacts.
Component
Type Description Quantity Catalog No.
Insulator 3 Position Insulator 1 MDX-3PI
4 Position Insulator 1 MDX-4PI
5 Position Insulator 1 MDX-5PI
6 Position Insulator 1 MDX-6PI
7 Position Insulator 1 MDX-7PI
8 Position Insulator 1 MDX-8PI
Shield Case Metal Shield Case 1 MDX-PZ
Contact Option 1 Plating 300 on Reel MDX-P-3A
Option 1 Plating 15,000 on Reel MDX-P-15A
Option 2 Plating 300 on Reel MDX-P-3B
Option 2 Plating 15,000 on Reel MDX-P-15B
Option 3 Plating 15,000 on Reel MDX-P-15D
Tool Ordering Information
The following tools are recommended for Mini Din Cable Plug Assembly.
One tool of each type is required.
Tool Type Description Catalog No.
Contact Crimp Stripper-Crimper Machine MDT-P25
Complete, Includes Dies
Contact Crimp Hand Tool MDT-P35
Crimps using 300 Contact Reels
Contact Insertion Combination Contact Insertion MDT-P41
and Insulator Insertion Tool
Contact Insertion Hand Tool MDT-P28
Fixture used with MDT-P28 MDT-P29
Insulator Insertion Insulator Insertion Bench Mounted Tool MDT-P34
Insulator Insertion Hand Tool MDT-P30
Shield Crimp Pneumatic Crimp Tool MDT-P81
Overview of Assembly Steps
• Prepare multi-conductor cable.
• Crimp contacts onto individual conductors using tool MDT-P25 or tool MDT-P35.
• Insert contact with conductor into insulator using tool MDT-P41 or have insertion tool MDT-P28 with insulator locating
vice MDT-P29.
• Insert insulator into the shield case using tool MDT-P34 or MDT-P30.
• Crimp the shield case onto the cable shield using tool MDT-P81.
• Overmold plastic to complete the assembly.
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
CARDCON™
Edge Connector
Commercial
FEATURES
■
AT and XT versions available.
■
Dip solder tails on .200" (5.08mm) row centers double readout.
■
Bifurcated semi-bellows contacts for added contact reliability.
■
Ideal for applications involving vibration or board irregularities.
■
Contact positions: 12, 15, 18, 20, 22, 25, 28, 30, 31, 36, 37, 40, 43, 44, 49,
50, 52, 60, 70, AT, and XT.
■
Accepts .062" (1.59mm) thick PC boards.
■
Available less mounting ears, or with .128" (3.25mm) mounting holes or
4-40 threaded holes.
■
Meets applicable performance criteria of MIL-C-21097.
■
Tube packaging available.
■
UL Recognized - file E170218 (UL1977) E130965 (UL1863).
.100" (2.54mm) Density
Dip Solder
MATERIALS
Insulation Material: UL 94V-0 rated glass-filled polyester, black
Contact Material: Spring brass
Standard Contact Plating: 10µin. selective gold over nickel, 50µin.
nickel in contact area, tin on tails
XT, AT Plating: 30µin. selective gold over 50µin. nickel in contact
area, tin on tails
ELECTRICAL
Withstanding Voltage: 650 VAC RMS (@ sea level)
Current Rating: 3 Amps
Contact Resistance: 10 Milliohms maximum
Insulation Resistance: 5000 Megohms minimum
MECHANICAL
Individual Contact Insertion and Separation Force:
12oz. maximum with .070" (1.78mm) blade;
1 oz. minimum with .054" (1.37mm) blade
ENVIRONMENTAL
Shock: Per MIL-STD-202E, Method 213, Condition C
Operating Temperature: -65°C to +105°C
Vibration: Per MIL-STD-202E, Method 204, Condition B
Humidity: Per MIL-STD-202, Method 103, Condition B
Accessories:
Polarizing Key: Two types (order separately):
a) for between-contact polarization and
b) for in-contact polarization.
See page 2-74 for more information.
Card Guide Posts: (order separately)
Attach to mounting ears and guide PC board into
connector. See page 2-74 for more information.
2-62
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-63
CARDCON™
Edge Connector
Commercial
.100" (2.54mm) Density
Dip Solder
Dimensions
No. of
Pos./Cont. in mm in mm in mm in mm in mm in mm
12/24 1.000 25.40 1.100 27.94 1.300 33.02 1.460 37.08 1.775 45.09 2.035 51.69
15/30 1.300 33.02 1.400 35.56 1.600 40.64 1.760 44.70 2.075 52.71 2.335 59.31
18/36 1.600 40.64 1.700 43.18 1.900 48.26 2.060 52.32 2.375 60.33 2.635 66.93
18/36+
31/62IBM 5.000 127.00 5.100 129.54 5.300 134.62 5.460 138.68 5.775 146.69 6.035 153.29
20/40 1.800 45.72 1.900 48.26 2.100 53.34 2.260 57.40 2.575 65.41 2.835 72.01
22/24 2.000 50.80 2.100 53.34 2.300 58.42 2.460 62.48 2.775 70.49 3.035 77.09
25/50 2.300 58.42 2.400 60.96 2.600 66.04 2.760 70.10 3.075 78.11 3.335 84.71
28/56 2.600 66.04 2.700 68.58 2.900 73.66 3.060 77.72 3.375 85.73 3.635 92.33
30/60 2.800 71.12 2.900 73.66 3.100 78.74 3.260 82.80 3.575 90.81 3.835 97.41
31/62 2.900 73.66 3.000 76.20 3.200 81.28 3.360 85.34 3.675 93.35 3.935 99.95
31/62IBM 2.900 73.66 3.000 76.20 3.200 81.28 3.360 85.34 3.675 93.35 3.935 99.95
36/72 3.400 86.36 3.500 88.90 3.700 93.98 3.860 98.04 4.175 106.05 4.435 112.63
37/74 3.500 88.90 3.600 91.44 3.800 96.52 3.960 100.58 4.275 108.59 4.535 115.19
40/80 3.800 96.52 3.900 99.06 4.100 104.14 4.260 108.20 4.575 116.21 4.835 122.81
43/86 4.100 104.14 4.200 106.68 4.400 111.76 4.560 115.82 4.875 123.83 5.135 130.43
44/88 4.200 106.68 4.300 109.22 4.500 114.30 4.660 118.36 4.975 126.37 5.235 132.97
49/98 4.700 119.38 4.800 121.92 5.000 127.00 5.160 131.06 5.475 139.07 5.735 145.67
50/100 4.800 121.92 4.900 124.46 5.100 129.54 5.260 133.60 5.575 141.61 5.835 148.21
52/104 5.000 127.00 5.100 129.54 5.300 134.62 5.460 138.68 5.775 146.69 6.035 153.29
60/120 5.800 147.32 5.900 149.86 6.100 154.94 6.260 159.00 6.575 167.01 6.835 173.61
70/140 6.800 172.72 6.900 175.26 7.100 180.34 7.260 184.40 7.575 192.41 7.835 199.01
Ordering Information
A B C D E F
.128" (3.25mm) 4-40
No. of Less Mounting Ears Mounting Holes Threaded Holes
Pos./Cont. Catalog No. Catalog No. Catalog No.
12/24 50-12SN-12 50-12SN-11 50-12SN-13
15/30 50-15SN-12 50-15SN-11 50-15SN-13
18/36 50-18SN-12 50-18SN-11 50-18SN-13
18/36+
31/62 IBM 50-52SN-AT - -
20/40 50-20SN-12 50-20SN-11 50-20SN-13
22/44 50-22SN-12 50-22SN-11 50-22SN-13
25/50 50-25SN-12 50-25SN-11 50-25SN-13
28/56 50-28SN-12 50-28SN-11 50-28SN-13
30/60 50-30SN-12 50-30SN-11 50-30SN-13
31/62 50-31SN-12 50-31SN-11 50-31SN-13
31/62 IBM 50-31SN-XT - -
36/72 50-36SN-12 50-36SN-11 50-36SN-13
37/74 50-37SN-12 50-37SN-11 50-37SN-13
40/80 50-40SN-12 50-40SN-11 50-40SN-13
43/86 50-43SN-12 50-43SN-11 50-43SN-13
44/88 50-44SN-12 50-44SN-11 50-44SN-13
49/98 50-49SN-12 50-49SN-11 50-49SN-13
50/100 50-50SN-12 50-50SN-11 50-50SN-13
52/104 50-52SN-12 50-52SN-11 50-52SN-13
60/120 50-60SN-12 50-60SN-11 50-60SN-13
70/140 50-70SN-12 50-70SN-11 50-70SN-13
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
CARDCON™
Edge Connector
Commercial
FEATURES
■
Dip solder tails single readout and double readout on .140" (3.56mm) row
centers or .200" (5.08mm) row centers.
■
Solder eyelet, single readout and double readout on .200" (5.08mm)
row centers.
■
Available with unique tails for PC board retention; holds the connector
firmly on the board during wave soldering operations.
■
Bifurcated semi-bellows contacts for added contact reliability.
■
Ideal for applications involving vibration or board irregularities.
■
Contact positions: 6, 10, 12, 15, 18, 22, 24, and 25.
■
Accepts single- or double-sided .062" (1.59mm) thick PC boards.
■
Available less mounting ears or with .128" (3.25mm) mounting hole.
■
Meets applicable performance criteria of MIL-C-21097.
■
UL Recognized - file E170218 (UL1977) E130965 (UL1863).
.156" (3.96mm) Density
Dip Solder/Solder Eyelet
MATERIALS
Insulation Material: UL 94V-0 rated glass-filled polyester, black
Contact Material: Spring brass
Contact Plating: 10µ" selective gold over 30µ" nickel in contact
area, tin on tails
ELECTRICAL
Withstanding Voltage: 1800 VAC RMS (@ sea level)
Current Rating: 5 Amps
Contact Resistance: 6 Milliohms maximum
Insulation Resistance: 5000 Megohms minimum
MECHANICAL
Individual Contact Insertion and Separation Force:
16 oz. maximum with .070" (1.78mm) blade;
1 oz. minimum with .054" (1.37mm) blade
ENVIRONMENTAL
Shock: Per MIL-STD-202E, Method 213, Condition C
Operating Temperature: -65°C to +105°C
Vibration: Per MIL-STD-202E, Method 204, Condition B
Humidity: Per MIL-STD-202, Method 103, Condition B
Accessories:
Polarizing Key: Two types (order separately):
a) for between-contact polarization and
b) for in-contact polarization
See page 2-72 for more information.
Card Guide Posts: (order separately):
Attach to mounting ears and guide PC board into connector
See page 2-72 for more information.
2-64
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
2
2-65
CARDCON™
Edge Connector
Commercial
.156" (3.96mm) Density
Dip Solder/Solder Eyelet
Ordering Information
No. of Less Mounting Ears .128 Mounting Hole No. of Less Mounting Ears .128 Mounting Hole No. of Less Mounting Ears .128 Mounting Hole
Pos./Cont. Catalog No. Catalog No. Pos./Cont. Catalog No. Catalog No. Pos./Cont. Catalog No. Catalog No.
Dip solder tails, single readout, .156" (3.96mm) Dip solder tails, double readout, .140" (3.55mm) row
Solder eyelet, single readout long spacing, .125" (3.18mm) long
6/6 50-6SN-8 50-6SN-7 6/6 50-6SN-6 50-6SN-5 6/12 50-12SN-4 50-12SN-2
10/10 50-10SN-8 50-10SN-7 10/10 50-10SN-6 50-10SN-5 10/20 50-20SN-4 50-20SN-2
12/12 50-12SN-8 50-12SN-7 12/12 50-12SN-6 50-12SN-5 12/24 50-24SN-4 50-24SN-2
15/15 50-15SN-8 50-15SN-7 15/15 50-15SN-6 50-15SN-5 15/30 50-30SN-4 50-30SN-2
18/18 50-18SN-8 50-18SN-7 18/18 50-18SN-6 50-18SN-5 18/36 50-36SN-4 50-36SN-2
22/22 50-22SN-8 50-22SN-7 22/22 50-22SN-6 50-22SN-5 22/24 50-44SN-4 50-44SN-2
24/24 50-24SN-8 50-24SN-7 24/24 50-24SN-6 20-24SN-5 24/48 50-48SN-4 50-48SN-2
25/25 50-25SN-8 50-25SN-7 25/25 50-25SN-6 50-25SN-5 25/50 50-50SN-4 50-50SN-2
Solder eyelet, double readout, .200" (5.08mm) Dip solder tails, double readout, .200" (5.08mm) Dip solder tails with unique board retention feature
row spacing row spacing, .156" (3.96mm) long .200" (5.08mm) row spacing, .156" (3.96mm) long
6/12 50-12SN-10 50-12SN-9 6/12 50-12SN-3 50-12SN-1 6/12 50-12SN-3R 50-12SN-1R
10/20 50-20SN-10 50-20SN-9 10/20 50-20SN-3 50-20SN-1 10/20 50-20SN-3R 50-20SN-1R
12/24 50-24SN-10 50-24SN-9 12/24 50-24SN-3 50-24SN-1 12/24 50-24SN-3R 50-24SN-1R
15/30 50-30SN-10 50-30SN-9 15/30 50-30SN-3 50-30SN-1 15/30 50-30SN-3R 50-30SN-1R
18/36 50-36SN-10 50-36SN-9 18/36 50-36SN-3 50-36SN-1 18/36 50-36SN-3R 50-36SN-1R
22/24 50-44SN-10 50-44SN-9 22/44 50-44SN-3 50-44SN-1 22/44 50-44SN-3R 50-44SN-1R
24/28 50-48SN-10 50-48SN-9 24/48 50-48SN-3 50-48SN-1 24/48 50-48SN-3R 50-48SN-1R
25/50 50-50SN-10 50-50SN-9 25/50 50-50SN-3 50-50SN-1 25/50 50-50SN-3R 50-50SN-1R
Dimensions
No. of A B C D
Pos./Cont. In mm in mm in mm in mm
6/12 1.785 45.34 1.531 38.89 1.239 31.47 1.100 27.94
10/20 2.410 61.21 2.156 54.76 1.874 47.34 1.724 43.79
12/24 2.723 69.16 2.469 62.71 2.177 55.30 2.036 51.71
15/30 3.191 81.05 2.937 74.60 2.645 67.18 2.504 63.60
18/36 3.660 92.96 3.406 86.51 3.114 79.10 2.972 75.49
22/44 4.285 108.84 4.031 102.39 3.739 94.94 3.596 91.34
24/48 4.598 116.79 4.344 110.34 4.052 102.92 3.911 99.34
25/50 4.754 120.75 4.500 114.30 4.208 106.88 4.067 103.30
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-66
Edge Connector
High Reliability
FEATURES
■
Dip solder tails, single readout, .156" (3.96mm) long or .234" (5.94mm) long.
■
Dip solder tails, double readout, .156" (3.96mm) or .234" (5.94mm) long on
.200" (5.08mm) row spacing, or .125" (3.18mm) long on .140" (3.56mm) row spacing.
■
Solder eyelet, single readout and double readout on .200" (5.08mm) row spacing.
■
Patented bifurcated bellows contacts for added contact reliability.
■
Ideal for applications involving vibration or board irregularities.
■
Contact positions: 6, 10, 12, 15, 18, 22, and 25.
■
Available with or without mounting ears.
■
Accepts single- or double-sided .062" (1.59mm) thick PC boards.
■
UL Recognized - file E170218 (UL1977) E130965 (UL1863).
.156" (3.96mm) Density Dip
Solder/Solder Eyelet
MATERIALS
Insulation Material: Diallyl phthalate, green
Contact Material: Phosphor bronze
Contact Plating: 30µ" selective gold over 50µ" copper in the
contact areas, 5µ" gold on tails
ELECTRICAL
Withstanding Voltage: 1800 VAC RMS (@ sea level)
Current Rating: 5 Amps
Contact Resistance: Dip solder: 6 Milliohms
Solder eyelet: 10 Milliohms
Insulation Resistance: 5000 Megohms minimum
MECHANICAL
Individual Contact Insertion and Separation Force:
16 oz. maximum with .070" (1.78mm) blade;
1 oz. minimum with .054" (1.37mm) blade
ENVIRONMENTAL
Shock: Per MIL-STD-202E, Method 202
Operating Temperature: Dip solder: -65°C to +105°C
Solder eyelet: -65°C to +125°C
Vibration: Per MIL-STD-202E, Method 204, Condition B
Humidity: Per MIL-STD-202E, Method 103, Condition B
Accessories:
Polarizing Key: Two types (order separately):
a) for between-contact polarization and
b) for in-contact polarization
See page 2-74 for more information.
Card Guide Posts: (order separately):
Attach to mounting ears and guide PC board into connector
See page 2-74 for more information.
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-67 Call Toll Free: 1 (800) 323-9612
Edge Connector
High Reliability
.156" (3.96mm) Density Dip
Solder/Solder Eyelet
Dimensions
No. of A B C D
Pos./Cont. in mm in mm in mm in mm
6 1.100 27.94 1.239 31.47 1.531 38.80 1.785 45.34
10 1.724 43.79 1.864 47.35 2.156 54.76 2.410 61.21
12 2.036 51.71 2.177 55.30 2.469 62.71 2.723 69.16
15 2.504 63.60 2.645 67.18 2.937 74.60 3.191 81.05
18 2.972 75.49 3.114 79.10 3.406 86.51 3.660 92.96
20 3.286 83.46 3.427 87.05 3.719 94.46 3.973 100.91
22 3.596 91.34 3.739 94.97 4.031 102.39 4.285 108.84
25 4.067 103.30 4.208 106.88 4.500 114.30 4.754 120.75
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
Single Readout
Double Readout
With Plain Mounting Holes
2-68
DURA-CON®
High Reliability
All-Plastic
[.050” (1.27mm) Density
Solder Cup/Wire
D-Microminiature]
Edge Connector
High Reliability
.156" (3.96mm) Density Dip
Solder/Solder Eyelet
2
Call Toll Free: 1 (800) 323-9612
Ordering Information
Double Readout
.128" (3.25mm) Mounting Hole Less Mounting Ears
Solder Eyelet Dip Solder Tails Dip Solder Tails Dip Solder Tails Dip Solder Tails
No. of .234" (5.94mm) Long .156" (3.96mm) Long .125" (3.18mm) Long .125" (3.18mm) Long
Pos./Cont. .200" (5.08mm) Between .200" (5.08mm) Between .140" (3.56mm) Between .140" (3.56mm) Between
Row Spacing Row Spacing Row Spacing Row Spacing
Catalog No. Catalog No. Catalog No. Catalog No. Catalog No.
6/12 50-12H-30 50-12S-20 50-12H-10 50-12H-30-2 50-12H-30-1
10/20 50-20H-30 50-20S-20 50-20H-10 50-20H-30-2 50-20H-30-1
12/24 50-24H-30 50-24S-20 50-24H-10 50-24H-30-2 50-24H-30-1
15/30 50-30H-30 50-30S-20 50-30H-10 50-30H-30-2 50-30H-30-1
18/36 50-36H-30 50-36S-20 50-36H-10 50-36H-30-2 50-36H-30-1
20/40 50-40A-30 50-40S-20 50-40B-10
22/44 50-44H-30 50-44S-20 50-44H-10 50-44H-30-2 50-44H-30-1
25/50 50-50H-30 50-50S-20 50-50H-10 50-50H-30-2 50-50H-30-1
Single Readout
.128" (3.25mm) Mounting Hole
No. of Dip Solder Tails Dip Solder Tails Solder
Pos./Cont. .156" (3.96mm) Long .234" (5.94mm) Long Eyelet
Catalog No. Catalog No. Catalog No.
6/6 50-6H-10 50-6S-10 50-6H-20
10/10 50-10H-10 50-10S-10 50-10H-20
12/12 50-12R-10 50-12S-10 50-12H-20
15/15 50-15H-10 50-15S-10 50-15H-20
18/18 50-18H-10 50-18S-10 50-18H-20
20/20 50-20C-10 50-20S-10 50-20A-20
22/22 50-22H-10 50-22S-10 50-22H-20
25/25 50-25H-10 50-25S-10 50-25H-20
2-70
Edge Connector
High Reliability
FEATURES
■
Solder terminations, double readout.
■
Bifurcated bellows type contacts.
■
Contact positions: 6, 10, 12, 15, 18, 22, and 25.
■
Accepts .062" (1.59mm) thick double-sided PC boards.
.156" (3.96mm) Density
Card Extender
MATERIALS
Insulation Material: Diallyl phthalate, green
Contact Material: Beryllium copper
Contact Plating: 30µin. select gold over 50µin. nickel in the contact
areas, 10µin. gold tails
ELECTRICAL
Withstanding Voltage: 830 VAC RMS (@ sea level)
Current Rating: 5 Amps
Contact Resistance: 5 Milliohms maximum
Insulation Resistance: 5000 Megohms minimum
MECHANICAL
Individual Contact Insertion and Separation Force:
16 oz. maximum with .070" (1.78mm) blade;
1 oz. minimum with .054" (1.37mm) blade
ENVIRONMENTAL
Shock: Per MIL-STD-202E, Method 213, Condition C
Operating Temperature: -65°C to +125°C
Vibration: Per MIL-STD-202E, Method 204, Condition B
Humidity: Per MIL-STD-202E, Method 103, Condition B
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-71
Edge Connector
High Reliability
.156" (3.96mm) Density
Card Extender
Dimensions
No. of A B C D
Pos./Cont. in mm in mm in mm in mm
6/12 1.100 27.94 1.239 31.47 1.531 38.88 1.785 45.33
10/20 1.724 43.79 1.864 47.34 2.156 54.76 2.410 61.21
12/24 2.036 51.71 2.177 55.29 2.469 62.71 2.723 69.16
15/30 2.504 63.60 2.645 67.18 2.937 74.59 3.191 81.05
18/36 2.972 75.48 3.114 79.09 3.406 86.51 3.660 92.96
22/44 3.596 91.33 3.739 94.97 4.031 102.38 4.285 108.83
25/50 4.067 103.30 4.208 106.88 4.500 114.30 4.754 120.75
Ordering Information
No. of
Pos./Cont. Catalog No.
6/12 50-12S-30
10/20 50-20S-30
12/24 50-24S-30
15/30 50-30S-30
18/36 50-36S-30
22/44 50-44S-30
25/50 50-50S-30
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
Dimensions
Edge Connector
Accessories
Card Guides
Polarizing Keys
2-72
Card Guides
Card guide for .100" (2.54mm) and .156" (3.96mm) density edge connectors. Accepts .062" (1.59mm) thick PC boards.
Card guides attach to mounting ears and guide printed circuit board into connector. Order separately.
Material: Polypropylene
Part No. 50-GP-1 (Green)
Part No. 50-GP-1B (Black)
Polarizing Keys
Style A Style B Style C Style D
Description Connector Family Material Style Catalog No.
Between-contact type .156" Cellulose acetate B 50-PK
In-contact type .156" Thermoset plastic B 50-PK1
Between-contact type .156" Glass epoxy A 50-PK2
Between-contact type .156" Glass epoxy D 50-PK2M
Between-contact type .100" Glass-filled nylon C 50-PK3
In-contact type .156" Thermoplastic B 50-PK4
Marketed exclusively through distribution.
Call Toll Free: 1 (800) 323-9612
2-74
Socket
Commercial
Miscellaneous
Plug Buttons
Nickel-plated steel. Spring tension prongs.
41V provides ventilation wherever required.
Dimensions
For Hole Cup
Diameter Diameter
in mm in mm Catalog No.
.250 6.35 .406 10.32 41A
.375 9.53 .500 12.70 41B
.500 12.70 .656 16.67 41C
.625 15.88 .797 20.24 41D
.750 19.05 .938 23.81 41E
.875 22.23 1.062 26.99 41F
1.000 25.40 1.156 29.37 41G
1.250 31.75 1.438 36.51 41H
1.000 25.40 1.156 29.37 41V
Plug Buttons
Call Toll Free: 1 (800) 323-9612
FEATURES
■
Solderless, Press-Fit Installation.
■
Strong, One-Piece Cast Body.
■
Standard BNC Interface.
■
75ΩΩImpedance.
■
Meets Lucent Technologies (AT&T) Requirements.
MATERIALS
Body: One-piece diecast zinc per QQ-Z-363
Plating: Nickel, 150µin. min. per QQ-N-290 over copper, 200µin.
min. per MIL-C-14550
Center Contact: Beryllium copper
Plating: Gold, 30µin. minimum over nickel, 50µin. minimum
Insulator: Teflon TFE per ASTM D1710
MECHANICAL
Connector Insertion Force: <500 lb.*
Connector Removal Force: >100 lb.*
Center Contact Insertion Force: <2.0 lb.*
Center Contact Removal Force: >2.0 oz.*
*Requirements are for two connector insertions into the same PC board
mounting holes. PC board thickness can range from .093" to .300" thick.
PC board hole requirements are as follows:
Ground Legs: .059" Nom.
Center Contact: .040" Nom.
ELECTRICAL
Impedance: 75Ω
Frequency Range: 0 to 4 GHz
RF Leakage: > -55 dB
Insertion Loss: .2dB maximum @ 2 GHz
VSWR: 1.024
Working Voltage: <500 VAC RMS @ sea level
Insulation Resistance: >5000 MOhms @ 500 VDC
2-76
Unique patented press-fit connector design
allows for multiple insertions into a backplane
without loss of mechanical retention or electrical
performance.
The design requirements for nominal PC board
mounting holes and thickness are as follows:
Insertion Forces:
.093 Board Thickness: 200 lb. max.
.250 Board Thickness: 500 lb. max.
Withdraw Forces:
.093 Board Thickness: 100 lb. max.
.250 Board Thickness: 200 lb. max.
The Cinch Press-Fit BNC surpasses these
requirements with a unique, non-symmetrical
ground leg design. This design allows the
connector to be inserted, removed, rotated 180o,
and reinserted into the same location on the
board without loss of mechanical or electrical
performance.
Press-Fit BNC Coaxial Connector Board Mount
Receptacle for 75 ΩΩApplications
Call Toll Free: 1 (800) 323-9612
Compliant version,
Pt. No. 299 99 00 134
is also available.
For more information please
contact us at 1-800-323-9612
2-77
Ordering Information
Catalog Number: BNC-1-PF
Standard Package: Anti-Static Tube, 48 Connectors Per Tube
Press-Fit BNC Coaxial Connector Board Mount
Receptacle for 75 ΩΩApplications
Call Toll Free: 1 (800) 323-9612
Production Insertion Tool Design
Press-Fit BNC Connector Dimensions
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cinch Connectivity Solutions:
6-140 16-140 95B 10-142-Y 11-140-Y 11-142-Y 1-140 1-140-Y 1-141 12-142-Y 13-140-Y 13-141-Y 14-140-Y
14-141-Y 15-161A-L 16-140-Y 17-140-Y 17-142-Y 18-140-Y 18-141-Y 18-161-R 19-160B-L 20-161A-L 20-
161A-R 2-142-Y 22-140-Y 24-140-Y 25-140-Y 3-160-L 3-160-R 4-142-Y 51 5-160-L 56 57-1010 6-161-L 7-
141-Y 8-161-L 8-161-R MS-10-140-Y MS-12-140-Y MS-13-142 MS-14-140-Y MS-14-141-Y MS-15-141-Y MS-16-
140-Y MS-17-142 MS-18-140-Y MS-24-140-Y MS-3-141-Y MS-3-142-Y MS-4-140-Y MS-4-141-Y MS-5-141-Y
MS-8-141-Y 8-140-P
