24
PRODUCT CATALOGUE - STEGOHEATING
These fan heaters prevent formation of condensation and provide an evenly distributed interior air temperature in
enclosures with electric/electronic components. The heaters are connected using the internal terminal connectors.
The small size of the CS / CSL 028 heaters make them ideal for use in enclosures where space is at a premium.
> Small, compact design
> Quiet in operation
> Dynamic heating up
> Clip or screw fixing
Fan Heaters CSL 028/CS 028
with clip fixing
Example of connection
Fan Heater
CS 028/CSL 028
Thermostat
FTO 011 (NC)
Heating capacity / Ambient temperature diagram
CS 028 / CSL 028
Heating capacity (W)
Temperature ( °C)
COMPACT SEMICONDUCTOR FAN HEATER
CS 028 / CSL 028 | 150 W to 400 W
TECHNICAL DATA
Heating element PTC resistor – temperature limiting
Axial fan, ball bearing air flow, free flow
CS 028: 13.8 m³/h
CSL 028: 45 m³/h (AC 230 V), 54 m³/h (AC 120 V)
service life 40,000 h at +40 °C (+104 °F)
Connection 2-pole clamp max. 2.5 mm² (CSL 028 with strain relief),
clamping screw torque 0.8 Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35 mm DIN rail, EN 60715 or screw fixing (Ø 5.3 mm)
Fitting position vertical airflow (air outlet up)
Dimensions see drawings
Operating/Storage temperature -45 to +70 °C (-49 to +158 °F)
Operating/Storage humidity max. 90 % RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Note other voltages on request
Fan Heaters CSL 028/CS 028
with screw fixing
FAN HEATER CS 028
FAN HEATER CSL 028
Art. No.
clip fixing
Art. No.
screw fixing
Operating voltage Heating
capacity¹
Inrush current
max.
Recommended pre-fuse T
(time-delay)
Weight
(approx.)
Approvals
02811.0-00 02811.0-01 AC 230 V, 50/60 Hz 250 W 9.0 A 10.0 A 0.5 kg VDE UL File No. E234324 EAC
02810.0-00 02810.0-01 AC 230 V, 50/60 Hz 400 W 15.0 A 16.0 A 0.5 kg VDE UL File No. E234324 EAC
02811.9-00 02811.9-01 AC 120 V, 50/60 Hz 250 W 6.0 A 10.0 A 0.5 kg - UL File No. E234324 EAC
02810.9-00 02810.9-01 AC 120 V, 50/60 Hz 400 W 9.0 A 10.0 A 0.5 kg - UL File No. E234324 EAC
¹ at +20 °C (+68 °F) ambient temperature
Art. No.
clip fixing
Art. No.
screw fixing
Operating voltage Heating
capacity¹
Inrush current
max.
Recommended pre-fuse T
(time-delay)
Weight
(approx.)
Approvals
02800.0-00 02800.0-01 AC 230 V, 50/60 Hz 150 W 12.0 A 10.0 A 0.3 kg VDE UL File No. E234324 EAC
02800.9-00 02800.9-01 AC 120 V, 50/60 Hz 150 W 6.0 A 10.0 A 0.3 kg - UL File No. E234324 EAC
05.03.2020 | Specifications are subject to change without notice. Errors and omissions excepted. Suitability of this product for its intended use and any associated risks must be determined by the end customer/buyer in its final application. www.stego.de | www.stego.co.uk | www.stegonorden.se
24TECHNICAL DATASHEET