10/100 Base-T Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C
Insertion Return Loss Common Mode
Part 4Data Turns EMI 1LEDs 2
BST Loss (dB MIN) Crosstalk Rejection Hipot
Number Rate Ratios Fingers (L/R) (dB MAX) 100Ω±15Ω(dB MIN) (dB MIN) (Vrms)
TX RX 1-65MHz 1-10MHz 10-30MHz 30-60MHz 60-80MHz 1-30MHz 30-60MHz 60-100MHz 1-50MHz 50-150MHz @60Hz 1 MIN
J00-0014 100BT 1CT:1 1CT:1 No None Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0042 100BT 1CT:1 1CT:1 No None No -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0045 100BT 1CT:1 1CT:1 No G/Y Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0046 100BT 1CT:1 1CT:1 No G/Y No -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0061 100BT 1CT:1 1CT:1 Yes None Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0064 100BT 1CT:1 1CT:1 Yes None No -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0065 100BT 1CT:1 1CT:1 Yes G/Y Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
J00-0066 100BT 1CT:1 1CT:1 Yes G/Y No -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
STARJACKTM
1x1 Tab-DOWN RJ45
www.pulseeng.com
Features and Benefits:
RoHS “NL” peak solder rating 260°C, non-RoHS peak solder rating 235°C
For RoHS part, add suffix NL4
Suitable for CAT 5 & 6 Fast Ethernet Cable or better UTP
Electrical Performance Summary:
Meets IEEE 802.3 specification
350µH minimum OCL with 8mA bias current
High performance for Max EMI suppression for cost-conscious applications
Description:
10/100 Base-TX RJ45 1x1 Tab-DOWN 8-pin Integrated Magnetics Connector, designed to support high volume
cost-conscious consumer applications such as: ADSL modems, Cable modems, STB and Video on Demand.
Notes: 1. For an explanation of EMI fingers, refer to the mechanical drawing page.
2. LEDs Left/Right: G=green, Y=yellow
3. IEEE802.3i (10Base-T) standard does not require these parts to achieve
350µH minimum OCL with 8mA bias current for 10Base-T parts.
4. Add suffix “NL” for RoHS compliant parts (e.g. J00-0065 changes to J00-0065NL).
Mating Force Unmating Force Plug to Jack
Part Number (MAX) (MAX) Durability Retention (MIN)
J00 Series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 Insertions 20 lbs./9.072 kgs.
RJ45 Durability Testing Rating
10 Base-T Electrical Specifications @ 25°C — Operating Temperature 0°C to +70°C
Insertion Return Loss Common Mode
Part 4Data Turns EMI 1LEDs 2
BST Loss (dB MIN) Crosstalk Rejection Hipot
Number Rate Ratios Fingers (L/R) (dB MAX) 100Ω±15Ω(dB MIN) (dB MIN) (Vrms)
TX RX 1-10MHz 1-10MHz 1-10MHz 5MHz @60Hz 1 MIN
J00-0025 310BT 1CT:2.5 1CT:1 Yes None No -1 -15 -30 -25 1500
J00-0051 310BT 1CT:2.5 1CT:1 Yes G/Y No -1 -15 -30 -25 1500
J00-0062 310BT 1CT:2.5 1CT:1 No None No -1 -15 -30 -25 1500
J00-0063 310BT 1CT:2.5 1CT:1 No G/Y No -1 -15 -30 -25 1500
NOTES: 1. Connector dimensions comply with FCC dimension requirements.
2. MSL - Moisture Sensitivity Level class limits = 1 to 5 (Highest: 1; Lowest: 5).
Part Shield Contact Housing MSL2
Number Material Finish Material Plating Area Solder Area 3Material Specification Rating
J00 20-40m inches Nickel over Phosphor Nickel underplating and 120µ inches Sn90/Pb10
Series Brass 10-20m inches Brass Bronze selective gold plating 15µ inches over 50µ inches nickel Thermoplastic UL 94 V-0 1
RJ45 Material Specification
3. NL parts are tin matte finish over nickel.
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
J414.B (7/05)
STARJACKTM
1x1 Tab-DOWN RJ45
J00-00XX Series Mechanicals
LED Configuration
www.pulseeng.com
Patent Pending
Date Code
Country of Origin
JXXXXXXXX
TM
.545
13,84
LEFT LED
RIGHT LED
.640
16,26
.140
3,56 SHIELD PIN
.290
7,37
.
425
10,80
.020
0,51
.135
3,43
.020
0,51
.125
3,18 .020
0,51
.125
3,18
SIGNAL PINS
HOUSING POST
.850
21,59MAX
.350
8,89
.100
2,54
.120
3,05 .250
6,35
.100
2,54
.024
0,61
.398
10,11
.450
11,43
.620
15,75
.498
12,65
7531
86 42
.003
0,08
8X .035
0,89
2X.064
1,63
4X .040
1,02
2X .128
3,25
11
12 10
9
.193
4,90
.133
3,38
.050
1,27
FRONT
BACK
HOUSING POST
SHIELD PIN
.560
14,22
TOP OF PCB
TO BOTTOM
OF OPENING
.010
0,25
R 2.54
6,45
4X RMAX
.010
0,25
.660
16,76
FRONT VIEW
Viewed from PCB Component side
Connector Marking
(An example - parts are marked on
the top or end surface as shown)
BACK
FRONT
SIDE VIEW
EMI Fingers Part Number
Location
Green / Yellow LED Specification - (LEDs without internal resistors)
Right LED
12
11
Left LED
9
10
Yellow 585 nm 2.5 V 2.1 V
Green 565 nm 2.5 V 2.2 V
Standard LED Wavelength Forward* V(MAX) (TYP)
* Assumes bias current = 20mA
Dimensions: Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
USA 858 674 8100
••
UK 44 1483 401 700
••
France 33 3 84 35 04 04
••
Singapore 65 6287 8998
••
Shanghai
86 21 32181071
••
China 86 769 5538070
••
Taiwan 886 2 26980228
www.pulseeng.com
J414.B (7/05)
STARJACKTM
1x1 Tab-DOWN RJ45
www.pulseeng.com
www.pulseeng.com
J414.B (7/05)
For More Information:
Pulse Worldwide
Headquarters
12220 World Trade Drive
San Diego, CA 92128
U.S.A.
www.pulseeng.com
TEL: 858 674 8100
FAX: 858 674 8262
Pulse
Northern Europe
3 Huxley Road
Surrey Research Park
Guildford, Surrey GU2 5RE
United Kingdom
TEL: 44 1483 401700
FAX: 44 1483 401701
Pulse
Southern Europe
Zone Industrielle
F-39270
Orgelet
France
TEL: 33 3 84 35 04 04
FAX: 33 3 84 25 46 41
Pulse South Asia
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
TEL: 65 6287 8998
FAX: 65 6280 0080
Pulse North Asia
3F-4, No. 81, Sec. 1
Hsin Tai Wu Road
Hsi-Chih
Taipei Hsien
Taiwan
TEL: 886 2 26980228
FAX: 886 2 26980948
Pulse
China Headquarters
No. 1
Industrial District
Changan, Dongguan
China
TEL: 86 769 5538070
FAX: 86 769 5538870
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners.
© Copyright, 2005. Pulse Engineering, Inc. All right reserved.
Pulse North China
Room 1002
No. 819
Nanjing West Rd
Shanghai
China
TEL: 86 21 32181071
FAX: 86 21 32181396
J00-00XX Series Electrical Schematics
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
7
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
1CT : 1
TRANSMIT
1CT : 1
RECEIVE
CABLE SIDE
PCB SIDE TO PHY
GND* 8
*Connecting pin 8 to Ground makes J00-0042/46/64/66
footprint compatible to J00-0014/45/61/65.
J00-0042/46/64/66 J00-0014/45/61/65
J00-0025/51/62/63
0.001mF
1CT : 1
RECEIVE
8
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
TD+ 1
CT 4
TD- 2
RD+ 3
CT 5
RD- 6
NC 7
8
1CT : 1
TRANSMIT
CABLE SIDE
PCB SIDE TO PHY
CHS
GROUND
75
75
75
75
NOTE: Connect CHS GND to PCB ground.
TD+ 1
CT 7
TD- 2
RD+ 3
CT 8
RD- 6
4
58
7
4
5
6 RX-
3 RX+
2 TX-
1 TX+
1CT : 2.5
TRANSMIT
1CT : 1
RECEIVE
CABLE SIDE
PCB SIDE TO PHY
