Introducing
Corcom SRB Series Power Line Filter with
Slide-in Mounting Style
The newest addition to the Corcom SRB Series filter features a unique, panel mounting
option. This new slide-in mounting approach provides a simple, cost eective installation
method, reducing the need for additional mounting hardware. The slide-in product oers
two versions of the new mounting style with either retention capability along the short
edges of the filter (X style) or retention capability along the long edges (Y style).
15 SRB X 8 -Q
Capacitor ID
See Chart
Omit if none (non-filtered)
Output Styles
8 - Wire leads
Mounting Style
X - Slide-in (short edge / horizontal)
Y - Slide-in (long edge / vertical)
SRB Series
Current Rating
15A*
ORDERING INFORMATION
* 15A versions are tested by Underwriters Laboratories
to US and Canadian requirements and are
VDE approved at 10A, 250VAC
corcom.com
Corcom SRB Series Slide-In Power Line Filters TE Connectivity
PRODUCT OFFERING
STANDARDS AND SPECIFICATIONS
•UL Recognized
•CSA Certified
•VDE Approved
APPLICATIONS
•Communications
•Computer and Consumer Electronics
•Industrial and Commercial
•Instrumentation and Medical Equipment
ELECTRICAL SPECIFICATIONS
KEY FEATURES
•Unique slide-in mounting style
•UL Recognized and
CSA Certified for 15A @ 250VAC
•VDE Approved for 10A @ 250VAC
•Filtered or non-filtered
•Compact depth
•X version slides in on short sides
•Y version slides in on long sides
Max. Leakage current each
Line to Ground:
Capacitor ID Value @ 120 VAC 60 Hz @ 250 VAC 50 Hz
(blank) - 2µA 5µA
Q33pF 2.1µA 3.65µA
R100pF 9.6µA 16.6µA
S220pF 19.2µA 33.2µA
T330pF 24.0µA 41.5µA
W470pF 0.04mA 0.07mA
X1000pF 0.07mA 0.13mA
Rated Currents: 15A*
Rated Voltage (max): 250 VAC
Operating Frequency: 50/60 Hz
ELECTRICAL SCHEMATIC
LINE LOAD
5-1609987-6: 15SRBX8
5-1609987-7: 15SRBX8-Q
5-1609987-8: 15SRBX8-R
5-1609987-9: 15SRBX8-S
6-1609987-0: 15SRBX8-T
6-1609987-1: 15SRBX8-W
6-1609987-2: 15SRBX8-X
6-1609987-5: 15SRBY8
6-1609987-6: 15SRBY8-Q
6-1609987-7: 15SRBY8-R
6-1609987-8: 15SRBY8-S
6-1609987-9: 15SRBY8-T
7-1609987-0: 15SRBY8-W
7-1609987-1: 15SRBY8-X
corcom.com
Corcom SRB Series Slide-In Power Line Filters TE Connectivity
CASE STYLES
PERFORMANCE DATA
Capacitor ID
Frequency — MHz
1 5 10 50 100 300
Q-----20
R- - - 3 6 22
S- - 1 6 17 19
T- - 2 13 13 19
W- 2 4 18 13 20
X- 5 9 25 10 17
Common Mode / Asymmetrical (Line to Ground) Minimum Insertion Loss - Measured in closed 50 Ohm system
SRBX8
Blue
Grn/Yel
BrownB
A
.045
E
D
Engage panel edge here
C
Typical Dimensions:
Line Inlet (1): IEC 60320-1 C14
Wire Leads: 4.0 [101.6] Min., 18AWG, UL1015
SRBY8
A
.045
Engage panel edge here
Blue
Grn/Yel
Brown
B
E
D
C
Typical Dimensions:
Line Inlet (1): IEC 60320-1 C14
Wire Leads: 4.0 [101.6] Min., 18AWG, UL1015
RECOMMENDED PANEL CUTOUTS
SRBX8 SRBY8
Cover
Jacket
Flange
0.15
3.81 Panel
Thickness .039 [1.0] ± .005 [.127]
1.066
27.07
.722
18.34
.836
21.23min.
Rmax.
min.
± .005 [.127]
Cover
Jacket
Flange
0.15
3.81
Rmax.
1.05
26.67
1.15
29.21min.
min.
.741
18.82
± .005 [.127]
Panel
Thickness .039 [1.0] ± .005 [.127]
Part No. A
(max)
B
(max)
C
(max)
D
(max)
E
(max)
15SRBX8 0.95 1.11 0.89 1.35 1.41
24.1 28.2 22.61 34.29 35.81
15SRBY8 0.95 1.11 0.89 1.30 2.78
85.34 46.23 32.51 60.325 34.54
CASE DIMENSIONS
te.com
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. All Rights Reserved.
4-1773450-8 CIS JG 06/2011
TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product
and/or company names might be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is
error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE
reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied
warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or tness for a
particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specications
are subject to change without notice. Consult TE for the latest dimensions and design specications.
FOR MORE INFORMATION
corcom.com
TE Technical Support Center
Internet: te.com/help
USA: +1 (800) 522-6752
Canada: +1 (905) 475-6222
Mexico +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
Part numbers in this brochure are RoHS Compliant*, unless marked otherwise.
*as defined www.te.com/leadfree