SQT-110-01-F-D-RA F-219 SQT-107-02-L-S SQT-110-03-F-Q SQT-117-01-L-D (2.00 mm) .0787" SQT SERIES SQT-112-01-L-6 COST-EFFECTIVE RUGGED SOCKETS Board Mates: TMMH, TMM, MTMM, MMT, TW, LTMM, ZLTMM, ESQT, PTT, TSH SPECIFICATIONS For complete specifications see www.samtec.com?SQT Insulator Material: Black Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Sn or Au over 50 " (1.27 m) Ni Current Rating (TMMH/SQT): 5.1 A per pin (2 pins powered) Voltage Rating: 281 VAC mated with TMM; 250 VAC mated with TMMH Operating Temp Range: -55 C to +125 C Insertion Depth: (2.62 mm) .103" to (5.03 mm) .198" Normal Force: 60 grams (0.59 N) average Max Cycles: 100 with 10 " (0.25 m) Au RoHS Compliant: Yes Lead-Free Solderable: Yes RECOGNITIONS Choice of one through six rows Vertical and Right-angle Cable Mates: TCMD (6.35 mm) .250" APPLICATIONS TMM/ SQT TMMH HORIZONTAL SQT For complete scope of recognitions see www.samtec.com/quality 1 NO. PINS PER ROW 02 thru 50 FILE NO. E111594 Note: Some lengths, styles and options are non-standard, non-returnable. (2.00 mm) .0787" pitch LEAD STYLE Specify LEAD STYLE from chart PLATING OPTION ROW OPTION -S = Single Row -F = Gold flash on contact, Matte Tin on tail -L 300 (2.00) .0787 TYP 295 Low Profile - 01 (2.29) .090 (15.24) .600 (5.28) .208 - 02 - 03 01 High Reliability -"XXX" = Four Row -5 = Five Row -6 = Six Row (6.35) .250 See SMM Series. See PTF Series. A No. of positions x (2.00) .0787 + (0.30) .012 See CLT Series. Press-Fit No. of rows x (2.00) .0787 LEAD STYLE -RA = Rightangle (-Q, -5 & -6 Row not available) (Lead Style -01 only) -Q 06 Surface Mount See SQW and TLE Series. -T = Triple Row Elevated See ESQT Series. -D = Double Row = 10 " (0.25 m) Gold on contact, Matte Tin on tail Other Solutions OTHER OPTION (0.38) .015 A (0.51) .020 SQ (2.00) .0787 TYP (1.27) (2.29) .050 (2.00) .090 .0787 -RA OPTION (-Q, -5 & -6 not available) Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. = Polarized Position (Indicate position number)