HMC183QS24 / 183QS24E v02.0805 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2 GHz Typical Applications Features The HMC183QS24 / HMC183QS24E is ideal for: Low Insertion Loss (1 GHz): 0.8dB * Basestation Infrastructure Integrated 3:8 Decoder 24 Lead QSOP Package Functional Diagram General Description The HMC183QS24 & HMC183QS24E are low-cost non-reflective SP8T switches in 24-lead QSOP packages for use in antenna diversity, switched filter banks, gain/attenuation selection, and general channel multiplexing applications. A 3:8 decoder is integrated on the switch, requiring only 3 control lines with a negative bias to select an RF path. The 3:8 decoder replaces 16 control lines normally required by GaAs SP8T switches. Switch outputs are terminated when "off". The QSOP24 package occupies the same area as a 14-lead SOIC. See positive bias/TTL version HMC253QS24. SWITCHES - SMT 10 Electrical Specifi cations, TA = +25 C, For 0/-5V Control and Vee = -5V in a 50 Ohm System Parameter Frequency Typ. Max. Units 0.8 1.0 1.3 1.2 1.5 1.8 dB dB dB Insertion Loss Isolation DC - 0.5 GHz DC - 1.0 GHz DC - 1.5 GHz DC - 2.0 GHz 38 32 29 26 42 36 33 30 dB dB dB dB Return Loss RFC DC - 1.0 GHz DC - 1.5 GHz DC - 2.0 GHz 16 10 7 20 14 11 dB dB dB Return Loss RF 1-8 `ON' and `OFF' DC - 1.0 GHz DC - 1.5 GHz DC - 2.0 GHz 12 10 10 15 13 13 dB dB dB 18 20 dBm dBm 35 42 dBm dBm 35 50 ns ns Input Power for 1 dB Compression 50 MHz 0.5 - 2.0 GHz Input Third Order Intercept (Two-Tone Input Power = +7 dBm Each Tone) 50 MHz 0.5 - 2.0 GHz Switching Characteristics DC - 2.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 10 - 14 Min. DC - 1.0 GHz DC - 1.5 GHz DC - 2.0 GHz 30 37 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC183QS24 / 183QS24E v02.0805 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2 GHz Isolation 0 0 -0.5 -10 ISOLATION (dB) -1 -1.5 -2 +25 C -40 C +85 C -2.5 -20 -30 -40 -50 -3 -60 0 0.5 1 1.5 2 2.5 3 0 0.5 FREQUENCY (GHz) 1.5 2 2.5 3 FREQUENCY (GHz) Return Loss 10 Isolation Between Several RF l/Os -20 0 S11 RFC S22 "On" S22 "Off" RF 8-7 RF 7-6 RF 5-4 RF 4-3 RF 3-2 RF 2-1 -30 ISOLATION (dB) -5 RETURN LOSS (dB) 1 -10 -15 -20 -40 -50 -25 -30 -60 0 0.5 1 1.5 2 2.5 3 0 0.5 FREQUENCY (GHz) 1 1.5 2 2.5 3 SWITCHES - SMT INSERTION LOSS (dB) Insertion Loss FREQUENCY (GHz) Bias Voltage & Current Control Voltages Vee Range = -5.0 Vdc 10% Vee (Vdc) Iee (Typ.) (mA) Iee (Max.) (mA) -5.0 6.0 9.0 State Bias Condition Low 0 to -3 VDC 2 70 uA Typ. High -5 to -4.2 VDC @ 5 uA Typ. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 15 HMC183QS24 / 183QS24E v02.0805 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2 GHz Absolute Maximum Ratings Bias Voltage Range (Port Vee) -7.0 Vdc Control Voltage Range (A & B) Vee -0.5 to +1.0 Vdc Storage Temperature -65 to +150 C Control Input Signal Path State A B C RFCOM to: High High High RF1 Operating Temperature -40 to +85 C Low High High RF2 Maximum Input Power +26 dBm (<500 MHz) +29 dBm (>500 MHz) High Low High RF3 Low Low High RF4 High High Low RF5 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Low High Low RF6 High Low Low RF7 Low Low Low RF8 Outline Drawing SWITCHES - SMT 10 Truth Table NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Leadframe Plating MSL Rating HMC183QS24 Low Stress Injection Molded Plastic Silica and Silicon Impregnated Sn/Pb Solder MSL1 HMC183QS24E RoHS-compliant Low Stress Injection Molded Plastic Silica and Silicon Impregnated 100% Matte Tin MSL1 Package Marking [3] [1] HMC183 XXXX [2] HMC183 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 10 - 16 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC183QS24 / 183QS24E v02.0805 GaAs MMIC SP8T NON-REFLECTIVE SWITCH, DC - 2 GHz Evaluation Circuit Board SWITCHES - SMT 10 List of Materials for Evaluation PCB 103706 [1] Item Description J1 - J9 PCB Mount SMA RF Connector J10 - J14 DC Pin C1 - C9 100 pF capacitor, 0402 Pkg. C10 10,000 pF capacitor, 0603 Pkg. U1 HMC183QS24 / HMC183QS24E SP8T Switch PCB* 103704 Evaluation PCB The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and package bottom should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 10 - 17