chipDISK-IDE IDE compatible Flash No moving parts & lockable Various sizes from small to huge Latest NAND flash technology www.kontron.com MBytes! chipDISK-IDE Product Overview The chipDISK is a fully IDE-compatible flash harddisk and was designed to replace the customary harddisk. The chipDISK is ased upon FLASH-TECHNOLOGY and is absolutely insensitive to tremors, vibrations, impacts, fluctuations in temperature and magnetic fields. The chipDISK is therefore best suited for use in mobile equipment and systems which need to withstand severe influences. The minimal mechanical measurement allow its employment in very compact pieces of equipment. The power consumption of the chipDISK is only a fraction of that needed by a "normal" harddisk which therefore considerably lengthens its amount of potential operation time. A hard disk contoller is integrated in the chipDISK which insures Technical Information With Kontron You stay...always a Jump ahead! Fully IDE hardware - compatible flash disk which is directly pluggable on to a 2.5" IDE plug Needs no special installation or formatting software Weight: < 10g Operating voltage: +5V 5% Endurance: 100.000 erase / programm cycles per logical sector Automatic error correction and retry Supports power down and start modem 44 Pin 2mm IDE plug connection No moving parts Smallest IDE hard disk suitable for use in industry Ordering Information Power consumption: sleep mode: < 1 mA reading: < 80 mA writing: <100 mA Temperature: operation: 0 to 70 C storage: -40 to 85 C Max. humidity: operation: 10% to 90% storage: 5% to 95% chipDISK bottom view Article Part.-No. Description chipDISK/32-IDE 08001-0032-00-0 IDE compatible flash-harddisk with 32 MByte chipDISK/128-IDE 08001-0128-00-0 IDE compatible flash-harddisk with 128 MByte chipDISK/256-IDE 08001-0256-00-0 IDE compatible flash-harddisk with 256 MByte chipDISK/512-IDE 08001-0512-00-0 IDE compatible flash-harddisk with 512 MByte chipDISK/1000-IDE 08001-1000-00-0 IDE compatible flash-harddisk with 1 GByte Corporate Offices Europe, Middle East & Africa Kontron AG Oskar-von-Miller-Str. 1 85386 Eching/Munich Germany Tel.: +49 (0)8165/ 77 777 Fax: +49 (0)8165/ 77 219 sales@kontron-emea.com North America Kontron America Corporate Office 14118 Stowe Drive Poway, CA 92064-7147 USA Tel.: +1 888 294 4558 Fax: +1 858 677 0898 sales@us.kontron.com www.kontron.com/MOPS Asia Pacific Kontron Asia Inc. 4F, No. 415, Ti-Ding Blvd. Sec.2, NeiHu District Taipei Taiwan 114 Tel.: +886-2-2799-2789 Fax: +886-2-2799-7399 sales@kontron.com.tw Kontron Embedded Modules Brunnwiesenstr. 16 94469 Deggendorf Germany Tel.: +49 (0)991/ 370 24-100 Fax: +49 (0)991/ 370 24-333 sales-kem@kontron.com #chipDISK-IDE#07062006PDL the complete compatibility with a normal" harddisk on one hand, and which conducts the organisation of the flashcomponents on the other. Potential defects in the flash-cells are automatically recognised and dealt with accordingly. Data protection is therefore considerably hightened. Data transfers up to PIO Mode 2 are supported. The chipDISK is designed to be directly plugged (without a cable) onto a 2 mm pin rail with the pin cover of a 2.5" IDE-hard disk. The chipDISK-IDE can be directly employed on most Kontron PC/104-CPU modules and Slot-CPU cards. All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners. DIMM-PC(R) and JUMPtec(R) are registered trademarks of Kontron Embedded Modules GmbH, Germany. Rev #ETXexpress-PM#300305 RoHS compliant logo means that product will be lead-free/RoHS compliant latest by June 30th, 2006.