chipDISK-IDE
IDE compatible Flash
No moving parts & lockable
Various sizes from small to huge MBytes!
Latest NAND flash technology
www.kontron.com
chipDISK bottom view
chipDISK-IDE
www.kontron.com/MOPS
North America
Kontron America Corporate Office
14118 Stowe Drive
Poway, CA 92064-7147
USA
Tel.: +1 888 294 4558
Fax: +1 858 677 0898
sales@us.kontron.com
Europe, Middle East & Africa
Kontron AG
Oskar-von-Miller-Str. 1
85386 Eching/Munich
Germany
Tel.: +49 (0)8165/ 77 777
Fax: +49 (0)8165/ 77 219
sales@kontron-emea.com
Asia Pacific
Kontron Asia Inc.
4F, No. 415, Ti-Ding Blvd.
Sec.2, NeiHu District
Taipei Taiwan 114
Tel.: +886-2-2799-2789
Fax: +886-2-2799-7399
sales@kontron.com.tw
Corporate Offices
Kontron Embedded Modules
Brunnwiesenstr. 16
94469 Deggendorf
Germany
Tel.: +49 (0)991/ 370 24-100
Fax: +49 (0)991/ 370 24-333
sales-kem@kontron.com
Product Overview
Article Part.-No. Description
chipDISK/32-IDE 08001-0032-00-0 IDE compatible flash-harddisk with 32 MByte
chipDISK/128-IDE 08001-0128-00-0 IDE compatible flash-harddisk with 128 MByte
chipDISK/256-IDE 08001-0256-00-0 IDE compatible flash-harddisk with 256 MByte
chipDISK/512-IDE 08001-0512-00-0 IDE compatible flash-harddisk with 512 MByte
chipDISK/1000-IDE 08001-1000-00-0 IDE compatible flash-harddisk with 1 GByte
Ordering Information
The chipDISK is a fully IDE-compatible flash harddisk and was
designed to replace the customary harddisk. The chipDISK is
ased upon FLASH-TECHNOLOGY and is absolutely insensitive to
tremors, vibrations, impacts, fluctuations in temperature and
magnetic fields. The chipDISK is therefore best suited for use
in mobile equipment and systems which need to withstand
severe influences. The minimal mechanical measurement allow
its employment in very compact pieces of equipment. The
power consumption of the chipDISK is only a fraction of that
needed by a “normal” harddisk which therefore considerably
lengthens its amount of potential operation time. A hard
disk contoller is integrated in the chipDISK which insures
the complete compatibility with a „normal“ harddisk on one
hand, and which conducts the organisation of the flash-
components on the other. Potential defects in the flash-cells
are automatically recognised and dealt with accordingly.
Data protection is therefore considerably hightened. Data
transfers up to PIO Mode 2 are supported. The chipDISK is
designed to be directly plugged (without a cable) onto a 2
mm pin rail with the pin cover of a 2.5” IDE-hard disk. The
chipDISK-IDE can be directly employed on most Kontron
PC/104-CPU modules and Slot-CPU cards.
With Kontron You stay...always a Jump ahead!
Technical Information
Fully IDE hardware - compatible flash disk which is directly
pluggable on to a 2.5” IDE plug
Needs no special installation or formatting software
Automatic error correction and retry
Supports power down and start modem
44 Pin 2mm IDE plug connection
No moving parts
Smallest IDE hard disk suitable for use in industry
Weight: < 10g
Operating voltage: +5V ±5%
Endurance: 100.000 erase / programm cycles per logical
sector
Power consumption: sleep mode: < 1 mA
reading: < 80 mA
writing: <100 mA
Temperature: operation: 0 to 70° C
storage: -40 to 85° C
Max. humidity: operation: 10% to 90%
storage: 5% to 95%
#chipDISK-IDE#07062006PDL
All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for
inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners. DIMM-PC® and JUMPtec® are registered trademarks of Kontron Embedded Modules GmbH, Germany. Rev #ETXexpress-PM#300305
RoHS compliant logo means that product will be lead-free/RoHS compliant latest by June 30th, 2006.
