TC74VCX16843FT TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VCX16843FT Low-Voltage 18-Bit D-Type Latch with 3.6-V Tolerant Inputs and Outputs The TC74VCX16843FT is a high-performance CMOS 18-bit D-type latch. Designed for use in 1.8-V, 2.5-V or 3.3-V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. It is also designed with overvoltage tolerant inputs and outputs up to 3.6 V. The TC74VCX16843FT can be used as two 9-bit latches or one 18-bit latch. The 18 latches are transparent D-type latches. The device has noninverting data (D) inputs and provides true data at its outputs. While the latch-enable (1LE or 2LE) input is high, the Q outputs of the corresponding 9-bit latch follow the D inputs. When LE is taken low, the Q outputs are latched at the levels set Weight: 0.25 g (typ.) up at the D inputs. CLR and PR are independent of the LE and are accomplished by setting the appropriate input low. When the OE input is high, the outputs are in a high-impedance state. This device is designed to be used with 3-state memory address drivers, etc. All inputs are equipped with protection circuits against static discharge. Features * Low-voltage operation: VCC = 1.8 to 3.6 V * High-speed operation : tpd = 3.0 ns (max) (VCC = 3.0 to 3.6 V) : tpd = 3.7 ns (max) (VCC = 2.3 to 2.7 V) : tpd = 7.4 ns (max) (VCC = 1.8 V) * Output current: IOH/IOL = 24 mA (min) (VCC = 3.0 V) : IOH/IOL = 18 mA (min) (VCC = 2.3 V) : IOH/IOL = 6 mA (min) (VCC = 1.8 V) * Latch-up performance: 300 mA * ESD performance: Machine model > 200 V * Package: TSSOP (thin shrink small outline package) * 3.6-V tolerant function and power-down protection provided on all inputs and outputs : Human body model > 2000 V 1 2001-10-17 TC74VCX16843FT Pin Assignment (top view) IEC Logic Symbol 1CLR 1 56 1LE 1OE 2 55 1PR 1Q1 3 54 1D1 GND 4 53 GND 1Q2 5 52 1D2 1Q3 6 51 1D3 VCC 7 50 VCC 1Q4 8 49 1D4 1Q5 9 48 1D5 1Q6 10 47 1D6 GND 11 46 GND 1Q7 12 45 1D7 1Q8 13 44 1D8 1Q9 14 43 1D9 2Q1 15 42 2D1 2Q2 16 41 2D2 2Q3 17 40 2D3 GND 18 39 GND 2Q4 19 38 2D4 2Q5 20 37 2D5 2Q6 21 36 2D6 VCC 22 35 VCC 2Q7 23 34 2D7 2Q8 24 33 2D8 GND 25 32 GND 2Q9 26 31 2D9 2OE 27 30 2PR 2CLR 28 29 2LE 1OE 1LE 1PR 1CLR 2OE 2LE 2PR 2CLR 1D1 1D2 1D3 1D4 1D5 1D6 1D7 1D8 1D9 2D1 2D2 2D3 2D4 2D5 2D6 2D7 2D8 2D9 2 2 56 55 1 27 29 30 28 54 52 51 49 48 47 45 44 43 42 41 40 38 37 36 34 33 31 EN2 C1 S2 R2 EN4 C3 S4 R4 1D 2 3D 4 3 5 6 8 9 10 12 13 14 15 16 17 19 20 21 23 24 26 1Q1 1Q2 1Q3 1Q4 1Q5 1Q6 1Q7 1Q8 1Q9 2Q1 2Q2 2Q3 2Q4 2Q5 2Q6 2Q7 2Q8 2Q9 2001-10-17 TC74VCX16843FT Truth Table (each 9-bit latch) Inputs PR CLR OE LE D Output Q L X L X X H H L L X X L H H L H L L H H L H H H H H L L X Qn X X H X X Z X: Don't care Z: High impedance Qn : Q outputs are latched at the time when the LE input is taken to a low logic level. System Diagram 1OE 1PR 1CLR 1LE 1D1 2 55 1 56 S LE D R 54 3 1Q1 To eight other channels 2OE 2PR 2CLR 2LE 2D1 27 30 28 29 S LE D R 42 15 2Q1 To eight other channels 3 2001-10-17 TC74VCX16843FT Maximum Ratings Characteristics Symbol Rating Unit Power supply voltage VCC -0.5 to 4.6 V DC input voltage VIN -0.5 to 4.6 V -0.5 to 4.6 (Note 1) DC output voltage VOUT -0.5 to VCC + 0.5 V (Note 2) Input diode current IIK -50 Output diode current IOK 50 DC output current IOUT 50 mA Power dissipation PD 400 mW ICC/IGND 100 mA Tstg -65 to 150 C DC VCC/ground current per supply pin Storage temperature mA (Note 3) mA Note 1: OFF state Note 2: High or low state. IOUT absolute maximum rating must be observed. Note 3: VOUT < GND, VOUT > VCC Recommended Operating Range Characteristics Power supply voltage Symbol VCC Input voltage VIN Rating Unit 1.8 to 3.6 V 1.2 to 3.6 (Note 4) -0.3 to 3.6 V 0 to 3.6 (Note 5) Output voltage Output current V VOUT 0 to VCC (Note 6) IOH/IOL Operating temperature Topr Input rise and fall time dt/dv 24 (Note 7) 18 (Note 8) 6 (Note 9) -40 to 85 0 to 10 (Note 10) mA C ns/V Note 4: Data retention only Note 5: OFF state Note 6: High or low state Note 7: VCC = 3.0 to 3.6 V Note 8: VCC = 2.3 to 2.7 V Note 9: VCC = 1.8 V Note 10: VIN = 0.8 to 2.0 V, VCC = 3.0 V 4 2001-10-17 TC74VCX16843FT Electrical Characteristics DC Characteristics (Ta = -40 to 85C, 2.7 V < VCC =< 3.6 V) Characteristics Symbol Test Condition Min Max Unit VCC (V) Input voltage H-level VIH 2.7 to 3.6 2.0 L-level VIL 2.7 to 3.6 0.8 IOH = -100 A 2.7 to 3.6 VCC - 0.2 IOH = -12 mA 2.7 2.2 IOH = -18 mA 3.0 2.4 IOH = -24 mA 3.0 2.2 IOL = 100 A 2.7 to 3.6 0.2 IOL = 12 mA 2.7 0.4 IOL = 18 mA 3.0 0.4 IOL = 24 mA 3.0 0.55 2.7 to 3.6 5.0 A 2.7 to 3.6 10.0 A 0 10.0 A VIN = VCC or GND 2.7 to 3.6 20.0 VCC < = (VIN, VOUT) < = 3.6 V 2.7 to 3.6 20.0 VIH = VCC - 0.6 V 2.7 to 3.6 750 Min Max H-level VOH VIN = VIH or VIL Output voltage L-level VOL Input leakage current IIN 3-state output OFF state current IOZ Power-off leakage current IOFF Quiescent supply current ICC Increase in ICC per input ICC VIN = VIH or VIL VIN = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V V V A DC Characteristics (Ta = -40 to 85C, 2.3 V <= VCC <= 2.7 V) Characteristics Symbol Test Condition Unit VCC (V) Input voltage H-level VIH 2.3 to 2.7 1.6 L-level VIL 2.3 to 2.7 0.7 2.3 to 2.7 VCC - 0.2 IOH = -6 mA 2.3 2.0 IOH = -12 mA 2.3 1.8 IOH = -18 mA 2.3 1.7 IOL = 100 A 2.3 to 2.7 0.2 IOL = 12 mA 2.3 0.4 IOL = 18 mA 2.3 0.6 2.3 to 2.7 5.0 A 2.3 to 2.7 10.0 A 0 10.0 A IOH = -100 A H-level VOH VIN = VIH or VIL Output voltage L-level VOL Input leakage current IIN 3-state output OFF state current IOZ Power-off leakage current IOFF Quiescent supply current ICC VIN = VIH or VIL VIN = 0 to 3.6 V VIN = VIH or VIL VOUT = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V VIN = VCC or GND 2.3 to 2.7 20.0 VCC < = (VIN, VOUT) < = 3.6 V 2.3 to 2.7 20.0 5 V V A 2001-10-17 TC74VCX16843FT DC Characteristics (Ta = -40 to 85C, 1.8 V =< VCC < 2.3 V) Characteristics Symbol Test Condition Min Max Unit VCC (V) H-level VIH 1.8 to 2.3 0.7 x VCC L-level VIL 1.8 to 2.3 0.2 x VCC VCC - 0.2 VOH IOH = -100 A 1.8 H-level IOH = -6 mA 1.8 1.4 IOL = 100 A 1.8 0.2 IOL = 6 mA 1.8 0.3 1.8 5.0 A 1.8 10.0 A 0 10.0 A VIN = VCC or GND 1.8 20.0 VCC < = (VIN, VOUT) < = 3.6 V 1.8 20.0 Input voltage VIN = VIH or VIL Output voltage VOL VIN = VIH or VIL Input leakage current IIN VIN = 0 to 3.6 V 3-state output OFF state current IOZ Power-off leakage current IOFF Quiescent supply current ICC L-level VIN = VIH or VIL VOUT = 0 to 3.6 V VIN, VOUT = 0 to 3.6 V 6 V V A 2001-10-17 TC74VCX16843FT AC Characteristics (Ta = -40 to 85C, input: tr = tf = 2.0 ns, CL = 30 pF, RL = 500 ) Characteristics Symbol Test Condition Min Max 1.8 1.5 7.4 2.5 0.2 0.8 3.7 Unit VCC (V) Propagation delay time (D-Q) tpLH Figure 1, Figure 2 tpHL Propagation delay time tpLH (LE-Q) tpHL Figure 1, Figure 2 Propagation delay time ( PR -Q) tpLH Figure 1, Figure 3 Propagation delay time ( CLR -Q) 3-state output enable time tpHL tpZL Figure 1, Figure 3 Figure 1, Figure 4 tpZH 3-state output disable time tpLZ Figure 1, Figure 4 tpHZ Minimum pulse width (LE, PR , CLR ) Minimum setup time Minimum hold time Minimum removal time Output to output skew tW (H) th trem 8.8 2.5 0.2 0.8 4.4 3.3 0.3 0.6 3.5 1.8 1.5 9.8 2.5 0.2 0.8 5.6 3.3 0.3 0.6 4.0 1.8 1.5 9.2 2.5 0.2 0.8 4.6 3.3 0.3 0.6 3.7 1.8 1.5 9.8 2.5 0.2 0.8 4.9 3.3 0.3 0.6 3.8 1.8 1.5 7.6 2.5 0.2 0.8 4.2 3.3 0.3 0.6 3.7 4.0 1.5 3.3 0.3 1.5 1.8 2.5 2.5 0.2 1.5 3.3 0.3 1.5 1.8 1.0 2.5 0.2 1.0 3.3 0.3 1.0 1.8 4.0 2.5 0.2 3.0 3.3 0.3 2.0 1.8 0.5 (Note 11) 2.5 0.2 0.5 3.3 0.3 0.5 Figure 1, Figure 2 Figure 1, Figure 5 tosHL 3.0 1.5 1.8 Figure 1, Figure 2 tosLH 0.6 1.8 2.5 0.2 Figure 1, Figure 2, Figure 3 tW (L) ts 3.3 0.3 ns ns ns ns ns ns ns ns ns ns ns For CL = 50 pF, add approximately 300 ps to the AC maximum specification. Note 11: Parameter guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) 7 2001-10-17 TC74VCX16843FT Dynamic Switching Characteristics (Ta = 25C, input: tr = tf = 2.0 ns, CL = 30 pF, RL = 500 ) Characteristics Test Condition Symbol Typ. Unit VCC (V) Quiet output maximum dynamic VOL Quiet output minimum dynamic VOL Quiet output minimum dynamic VOH VOLP VOLV VOHV VIH = 1.8 V, VIL = 0 V (Note 12) 1.8 0.25 VIH = 2.5 V, VIL = 0 V (Note 12) 2.5 0.6 VIH = 3.3 V, VIL = 0 V (Note 12) 3.3 0.8 VIH = 1.8 V, VIL = 0 V (Note 12) 1.8 -0.25 VIH = 2.5 V, VIL = 0 V (Note 12) 2.5 -0.6 VIH = 3.3 V, VIL = 0 V (Note 12) 3.3 -0.8 VIH = 1.8 V, VIL = 0 V (Note 12) 1.8 1.5 VIH = 2.5 V, VIL = 0 V (Note 12) 2.5 1.9 VIH = 3.3 V, VIL = 0 V (Note 12) 3.3 2.2 V V V Note 12: Parameter guaranteed by design. Capacitive Characteristics (Ta = 25C) Characteristics Symbol Test Condition Typ. Unit VCC (V) Input capacitance Output capacitance Power dissipation capacitance CIN 1.8, 2.5, 3.3 6 pF COUT 1.8, 2.5, 3.3 7 pF 1.8, 2.5, 3.3 20 pF CPD fIN = 10 MHz (Note 13) Note 13: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPDVCCfIN + ICC/18 (per bit) 8 2001-10-17 TC74VCX16843FT AC Test Circuit 6.0 V or VCC x 2 Open GND RL Switch Switch tpLH, tpHL Open RL Measure CL Output Parameter tpLZ, tpZL CL = 30 pF RL = 500 @VCC = 3.3 0.3 V @VCC = 2.5 0.2 V @VCC = 1.8 V 6.0 V VCC x 2 tpHZ, tpZH GND Figure 1 AC Waveform tf 2.0 ns tr 2.0 ns Input (LE) 10% tr 2.0 ns Input (D) VM GND tf 2.0 ns tw (H) VIH 90% VM VM 10% GND ts (H) Output (Q) VIH 90% VM th (H) ts (L) th (L) VOH VM VM tpLH tpHL tpHL Figure 2 Input ( CLR ) VOL tpLH, tpHL, tw, ts, th VIH VM GND tw (L) VIH Input ( PR ) VM tw (L) Output (Q) tpLH GND VOH VM VM tpHL tpLH Figure 3 VOL tpLH, tpHL, tw 9 2001-10-17 TC74VCX16843FT tr 2.0 ns tf 2.0 ns VIH 90% VM Output Enable Control ( OE ) 10% tpLZ GND tpZL 3.0 V or VCC Output (Q) Low to Off to Low VM tpHZ VX VOL tpZH VOH VY Output (Q) High to Off to High VM GND Outputs enabled Outputs disabled Figure 4 Outputs enabled tpLZ, tpHZ, tpZL, tpZH tr 2.0 ns Input ( CLR , PR ) VIH 90% VM 10% GND tf 2.0 ns VIH 90% VM Input (LE) 10% trem Figure 5 Symbol GND trem VCC 3.3 0.3 V 2.5 0.2 V 1.8 V VIH 2.7 V VCC VCC VM 1.5 V VCC/2 VCC/2 VX VOL + 0.3 V VOL + 0.15 V VOL + 0.15 V VY VOH - 0.3 V VOH - 0.15 V VOH - 0.15 V 10 2001-10-17 TC74VCX16843FT Package Dimensions Weight: 0.25 g (typ.) 11 2001-10-17 TC74VCX16843FT RESTRICTIONS ON PRODUCT USE 000707EBA * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 12 2001-10-17