EDI7F33512C
512Kx32 Flash
1
EDI7F33512C Rev. 3 5/97 ECO #9020
Electronic Designs Incorporated
• One Research Drive • Westborough, MA 01581USA • 508-366-5151 • FAX 508-836-4850 •
Electronic Designs Europe Ltd. • Shelley House, The Avenue • Lightwater, Surrey GU18 5RF
United Kingdom • 01276 472637 • FAX: 01276 473748
EDI7F33512C-BNC
512Kx32 80 pin SIMM
Features
• 512Kx32, 2x512Kx32 and 4x512Kx32 Densities
• Based on AMDs - AM290F040 Flash Device
• Fast Read Access Time - 80-150ns
• 5- Volt-Only Reprogramming
• Sector Erase Architecture
• Uniform sectors of 64 Kbytes each
• Any combination of sectors can be erased
• Also supports full chip erase
• Sector Protection
• Hardware method that disables any
combination of sectors from write or
erase operations
• Embedded Erase Algorithms
• Automatically preprograms and erases the
chip or any combination of sectors
• Embedded Program Algorithms
• Automatically programs and verifies data at
specified address
• Data Polling and Toggle Bit feature for detection
of program or erase cycle completion
• Low Power Dissipation
• 40mA per Device Active Current
• 10µA per Device CMOS Standby Current
• Typical Endurance >100,000 Cycles
• Single 5 Volt ±10% Supply
• CMOS and TTL Compatible Inputs and Outputs
• Commercial and Industrial Temperature Range
• Package
• 80 Pin SIMM (JEDEC)
512Kx32 Flash
The EDI7F33512, EDI7F233512 and EDI7F433512
are organized as 512Kx32 and 2x512Kx32 and
4x512Kx32 respectively. The modules are based on
AMD's AM29F040 - 512Kx8 Flash Device in TSOP
packages which are mounted on an FR4 substrate.
The modules offer access times between 80 and
150ns allowing for operation of high-speed micro-
processors without wait states.
Block Diagrams
EDI7F433512C-BNC
4x512Kx32 80 pin SIMM
EDI7F233512C-BNC
2x512Kx32 80 pin SIMM