SFH310FA-2/3 - OSRAM Opto Semiconductors

SFH 310

SFH 310 FA

NPN-Silizium-Fototransistor

Silicon NPN Phototransistor

Lead (Pb) Free Product - RoHS Compliant

SFH 310 SFH 310 FA

2008-11-06 1

Wesentliche Merkmale

•Spektraler Bereich der Fotoempfindlichkeit:

450 nm ...1100 nm (SFH 310)

• 740 nm ...1100 nm (SFH 310FA)

•Gehäuse: 3mm Radial (T1), Harz

•Besonderheit des Bauteils:

hohe Fotoempfindlichkeit

Anwendungen

• Lichtschranken

• Industrieelektronik

• „Messen/Steuern/Regeln“

Typ

Type Bestellnummer

Ordering Code Fotostrom, Ee= 0.5mW/cm2, λ = 950nm, VCE =5V

Photocurrent

Ipce (mA)

SFH 310 Q62702P0874 ≥ 0.63

0.63...2.0

SFH 310-2/3 Q62702P3595

SFH 310 FA Q62702P1673 ≥ 0.63

SFH 310 FA-2/3 Q62702P3596 0.63...2.0

Features

•Spectral Range of Sensitivity:

450 nm ... 1100 nm (SFH 310)

• 740 nm ... 1100 nm (SFH 310FA

•Package: 3 mm Radial (T1), Epoxy

•Feature of the device:

high photosensitivity

Applications

• Photointerrupters

• Industrial electronics

• For control and drive circuits

2008-11-06 2

SFH 310, SFH 310 FA

Grenzwerte

Maximum Ratings

Bezeichnung

Parameter Symbol

Symbol Wert

Value Einheit

Unit

Betriebs- und Lagertemperatur

Operating and storage temperature range Top; Tstg – 40 …+ 100 °C

Kollektor-Emitterspannung

Collector-emitter voltage VCE 35 V

Kollektorstrom

Collector current IC50 mA

Kollektorspitzenstrom, τ < 10 μs

Collector surge current ICS 100 mA

Verlustleistung, TA = 25 °C

Total power dissipation Ptot 165 mW

Wärmewiderstand

Thermal resistance RthJA 450 K/W

SFH 310, SFH 310 FA

2008-11-06 3

Kennwerte (TA = 25 °C, λ = 950 nm)

Characteristics

Bezeichnung

Parameter Symbol

Symbol Wert

Value Einheit

Unit

SFH 310 SFH 310 FA

Wellenlänge der max. Fotoempfindlichkeit

Wavelength of max. sensitivity λSmax 880 890 nm

Spektraler Bereich der Fotoempfindlichkeit

S = 10% von Smax

Spectr al range of sens itivity

S = 10% of Smax

λ450 …1100 740 …1100 nm

Bestrahlungsempfindliche Fläche

Radiant sensitive area A0.11 0.11 mm2

Abmessung der Chipfläche

Dimensions of chip area L×B

L×W0.5 ×0.5 0.5 ×0.5 mm ×mm

Halbwinkel

Half angle ϕ± 25 ± 25 Grad

deg.

Kapazität, VCE = 0 V, f = 1 MHz, E=0

Capacitance CCE 7.5 7.5 pF

Dunkelstrom

Dark current

VCE = 10 V, E=0

ICEO 1 (≤ 50) 1 (≤ 50) nA

2008-11-06 4

SFH 310, SFH 310 FA

Directional Characteristics

Srel = f (ϕ)

Die Fototransistoren werden nach ihrer Fotoempfindlichkeit gruppiert und mit arabischen Ziffern

gekennzeichnet.

The phototransistors are grouped according to their spectral sensitivity and distinguished by

arabian figures.

Bezeichnung

Parameter Symbol

Symbol Wert

Value Einheit

Unit

-2 -3 -4

Fotostrom, λ = 950 nm

Photocurrent

Ee = 0.5 mW/cm2, VCE = 5 V

SFH 310:

Ev = 1000 Ix, Normlicht/

standard light A, VCE = 5 V

IPCE

0.63 …1.25

3.0

1.0 …2.0

4.8

1.6 …3.2

7.7

Anstiegszeit/Abfallzeit

Rise and fall time

IC = 1 mA, VCC = 5 V, RL = 1 kΩ

tr, tf5812μs

Kollektor-Emitter-Sättigungsspannung

Collector-emitter saturation

voltage

IC = IPCEmin1) × 0.3,

Ee = 0.5 mW/cm2

VCEsat 150 150 150 mV

1) IPCEmin ist der minimale Fotostrom der jeweiligen Gruppe.

1) IPCEmin is the min. photocurrent of the specified grou p.

SFH 310, SFH 310 FA

2008-11-06 5

Relative Spectral Sensitivity,

SFH 310 Srel = f (λ)

Total Power Dissipation

Ptot = f (TA)

Dark Current

ICEO = f (TA), VCE = 10 V, E = 0

400

0nm

OHF04042

100

rel

500 600 700 800 900 1100

OHF00871

tot

120

160

200

20 40 60 80 ˚C 100

OHF04050

CEO

-2

-1

100

102

104

-25 0 25 50 75 100˚C

Relative Spectral Sensitivity,

SFH 310 FA Srel = f (λ)

Photocurrent

IPCE = f (VCE), Ee = Parameter

Capacitance

CCE = f (VCE), f = 1 MHz

400

0nm

OHF04075

100

rel

500 600 700 800 900 1100

OHF04051

10-3 10-2 10-1 100101102

Photocurrent

IPCE = f (Ee), VCE = 5 V

Dark Current

ICEO = f (VCE), E = 0

Photocurrent IPCE = f (TA),

VCE = 5 V, normalized to 25 °C

OHF04049

-1

-2

CEO

0V510 15 20 25 30 35

OHF01524

-25

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

0 25 50 75 100

PCE

2008-11-06 6

SFH 310, SFH 310 FA

Maßzeichnung

Package Outlines

Maße in mm (inch) / Dimensions in mm (inch).

Lötbedingungen

Soldering Conditions

Wellenlöten (TTW) (nach CECC 00802)

TTW Soldering (acc. to CECC 00802)

0.4 (0.016)

0.6 (0.024)

3.1 (0.122)

3.4 (0.134)

Area not flat

5.7 (0.224)

6.1 (0.240)

ø2.7 (0.106)

ø2.9 (0.114)

4.8 (0.189)

4.4 (0.173)

3.7 (0.146)

3.5 (0.138)

27.0 (1.063)

29.0 (1.142)

spacing

2.54 (0.100)

0.8 (0.031)

0.4 (0.016)

0.7 (0.028)

0.4 (0.016)

0.6 (0.024)

1.2 (0.047)

1.8 (0.071)

GEXY6710

0.9 (0.035)

1.1 (0.043)

Collector

OHLY0598

050 100 150 200 250

100

150

200

250

300

235 C

10 s

C... 260

1. Welle

1. wave

2. Welle

2. wave

5 K/s 2 K/s

ca 200 K/s

CC... 130100

2 K/s Zwangskühlung

forced cooling

Normalkurve

standard curve

Grenzkurven

limit curves

SFH 310, SFH 310 FA

2008-11-06 7

Published by

OSRAM Opto Semiconductors GmbH

Wernerwerkstrasse 2, D-93049 Regensburg

www.osram-os.com

The information describes the type of component and shall not be considered as assu red characteristics.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain

dangerous substances. For information on the types in question please contact our Sales Organization.

Packing

Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.

By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing

material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs

incurred.

Components used in life-support devices or systems must be expressly authorized for such purpose! Critical

components 1 , may only be used in life-supp ort devices or systems 2 with the express written approval of OSRAM OS.

1 A critical componen t is a component usedin a life-support device or syste m whose failure can reasonably be expected

to cause the failure of that life-support devic e or system, or to a ffect its safety or e ffectiveness of that device or system.

2 Life support devices or syste ms are intended (a) to be im planted in the human body, or (b) to sup port and/or maintain

and sustain human life. If they fail, it is reasonable to assume that the health of the us er may be endangered.