Quick Start Guide EK-P5 Quick Start Guide EK-P5 1 Install FTDI USB driver for the sensor cable. (http://www.ftdichip.com/Drivers/VCP.htm) 2 Install software after download from: www.sensirion.com/USB-viewer 3 Connect the USB sensor cable to the sensor PCB and the PC. 4 Start up the USB RS485 Sensor Viewer. 5 Under COM Hardware, select RS485/USB Sensor cable. 6 Select the sensor product Sensirion Flow Meters (SF06 Chip). 7 Select COM port and press OK. Highest COM port is most often correct. 8 The SF06 Viewer appears. Adjust the following settings first: Change units to Pascal. Set scale factor to 60. Set sampling time to 0.5ms or more. Enter command HEX 0x3603. 9 Press Run. 161200-EK-P5 For more information about Sensirion's differential pressure sensors of the SDP800 series, please visit www.sensirion.com/sdp800 or contact our technical customer support team: SENSIRION AG Laubisruetistrasse 50 8712 Staefa Switzerland Phone + 41 44 306 40 00 Fax + 41 44 306 40 30 info@sensirion.com www.sensirion.com