SPECIFICATION CONTROL DRAWING Product Revisions Component Dimensions Part Name S03-01-R-9035-100 A Ident. Code 1-HB S03-02-R-9035-100 A 2-HB S03-03-R-9035-100 A 3-HB S03-04-R-9035-100 A 4-HB S03-05-R-9035-100 A 5-HB L1.75 (L0.07) 16.5 (0.650) 16.5 (0.650) 16.5 (0.650) 19.7 (0.775) 19.7 (0.775) B min 1.9 (0.075) 2.65 (0.105) 4.3 (0.170) 5.95 (0.235) 7.0 (0.275) C min 2.65 (0.105) 3.55 (0.140) 5.0 (0.195) 6.45 (0.255) 7.6 (0.300) H min 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) Shall Accommodate Cable With Dimensions E F D max min max 2.65 0.90 1.9 (0.105) (0.035) (0.075) 3.55 1.40 2.65 (0.140) (0.055) (0.105) 5.0 2.15 4.3 (0.195) (0.085) (0.170) 6.45 3.30 5.95 (0.255) (0.130) (0.235) 7.6 4.30 7.0 (0.300) (0.170) (0.275) MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue. 2. SOLDER PREFORM WITH FLUX & THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. THERMAL INDICATOR: Color change violet to colorless. 3. MELTABLE RINGS: Thermally stabilized thermoplastic. Color: blue. 4. PRE-INSTALLED BRAID: Tin plated copper strands. CMA 1000. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the dimensional criteria listed, having tin or silver plated shields. 2. Temperature range: -55C to +150C. 3. Install using Raychem-approved convection or infrared heating tools in accordance with Raychem process standard RCPS-100-70. Infrared tools are not recommended for use with black jackets. For best results, prepare the cable as shown: *A trademark of Raychem Corporation. THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE IN BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should 0.00 N/A evaluate the suitability of the product for ROUGHNESS IN 0.0 N/A their application. MICRON 0 N/A TITLE: SOLDERSLEEVE* DEVICE SHIELD TERMINATION WITH BRAID DOCUMENT NO.: S03-0X-R-9035-100 DCR NUMBER: DRAWN BY: DATE: REV.: DOC ISSUE: R. MAPALO 07/20/98 SEE TABLE 1 If this document is printed it becomes uncontrolled. Check for the latest revision. REPLACES: D981108 SCALE: NONE S03-9035 SIZE: A SHEET: 1 of 1