DS14C89A Quad CMOS Receiver General Description The DS14C89A, pin-for-pin compatible to the DS1489A/ MC1489A, ia a quad receiver designed to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE). These devices translate levels conforming to EIA-232E and CCITT V.28 standards to TTL/CMOS logic levels. The device is fabricated in low threshold CMOS metal gate technology. The device provides very low power consumption compared to their bipolar equivalents: 900 A (DS14C89A) versus 26 mA (DS1489A). When replacing the DS1489A with the DS14C89A, the response control filter pins can be tied high, low, or not connected. Features n n n n n Meets EIA/TIA-232-E and CCITT V.28 Standards Failsafe - Output High for Open Input LOW Power consumption On chip noise filter Available in SOIC Package The DS14C89A provides on chip noise filtering which eliminates the need for external response control filter capacitors. Connection Diagram 01110601 Order Number DS14C89AN, DS14C89AM, See NS Package Number M14A, N14A (c) 2004 National Semiconductor Corporation DS011106 www.national.com DS14C89A Quad CMOS Receiver May 1998 DS14C89A Absolute Maximum Ratings (Note 1) (Soldering 4 seconds) +260C Storage Temp. Range If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. -65C to +150C ESD Rating 1.8 kV, Typically 2 kV (HMB, 1.5 k, 100 pF) +6V VCC Input Voltage -30V to +30V Receiver Output Voltage Recommended Operating Conditions (VCC) +0.3V to GND-0.3V Junction Temperature +150C VCC (GND = 0V) Continuous Power Dissipation @ +25C (Note 2) N Package 1513 mW M Package 1063 mW Min Max Units +4.5 +5.5 V +75 C Operating Free Air Temp. (TA) DS14C89A 0 Lead Temp. Electrical Characteristics Over recommended operating conditions, unless otherwise specified Symbol Parameter Conditions Min Typ Max Units V VTH Input High Threshold 1.3 2.7 VTL Input Low Threshold 0.5 1.9 VHY Typical Input Hysteresis IIN Input Current VOH VOL 1.0 VIN = +25V Output High Voltage Output Low Voltage VCC = +4.5V to +5.5V V V 3.6 8.3 mA VIN = -25V -3.6 -8.3 mA VIN = +3V 0.43 1.0 mA VIN = -3V -0.43 -1.0 mA VIN = +15V VCC = 0V (Power-Off) 2.14 5.0 mA VIN = -15V (Note 4) -2.14 -5.0 mA VIN = +3V 0.43 1.0 mA VIN = -3V -0.43 -1.0 mA VIN = VTL (min) IOUT = -3.2 mA 2.8 4.0 V IOUT = -20A 3.5 4.7 V VIN = VTH (max) 0.15 0.4 V 0.5 900 A IOUT = +3.2 mA ICC Supply Current No Load, VIN = 2.7V or 0.5V AC Electrical Characteristics (Note 3) Over recommended operating conditions, unless otherwise specified, CI = 50 pF Symbol Parameter ConditIons Min Typ Max Units 3.5 6.5 s 3.2 6.5 tPLH Propagation Delay Low to High Input Pulse Width 10 s tPHL Propagation Delay High to Low Input Pulse Width 10 s tSK Typical Propagation Delay Skew 400 tr Output Rise TIme 40 300 ns tf Output Fall Time 40 300 ns tnw Pulse Width assumed to be Noise 1.0 s s ns Note 1: "Absolute Maximum Ratings" are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of "Electrical Characteristics" specify conditions for device operation. Note 2: Derate N Package 12.1 mW/C, and M Package 8.5 mW/C above +25C. Note 3: AC input waveforms for test purposes: tr = tf = 200 ns, VIH = +3V, VL = -3V, f = 20 KHz. Note 4: Under the power-off supply conditions it is assumed that the power supply potential drops to zero (0V) and is replaced by a low impedance or short circuit to ground. www.national.com 2 DS14C89A Parameter Measurement Information 01110602 FIGURE 1. Receiver Load Circuit 01110603 FIGURE 2. Receiver Switching Waveform (Note 3) Typical Application Information 01110604 FIGURE 3. Receiver Block Diagram 01110605 FIGURE 4. EIA-232D Data Transmission 3 www.national.com DS14C89A Physical Dimensions inches (millimeters) unless otherwise noted Order Number DS14C89AM NS Package Number M14A Order Number DS14C89AN NS Package Number N14A www.national.com 4 DS14C89A Quad CMOS Receiver Notes LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ``Banned Substances'' as defined in CSP-9-111S2. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.