MENB1060 Universal Input 60 Watt Series Medical Switch-Mode Power Supply 3 Year Warranty *100-240VAC Universal Input *Meets EISA2007, CEC Efficiency Level V, EU (EC) No 278/2009 Phase II *Certified to UL/EN60601-1 *Desktop Style *5V to 24V Single Output Models, up to 60W *Modified and Custom Designs Available *Regulated Output with Low Ripple *Impact-Resistant Polycarbonate Enclosure *No Load Power Consumption <0.5W RoHS Specifications All Specifications are typical at nominal input, full load at 25C unless otherwise stated. AC Input 100-240Vac, -/-10%, 47-63 Hz, 1 Input Current 100VAC: 1.5A max Inrush Current Input Fuse 60 A peak, 264 V, cold start 2.0A, 250V Internal Primary Current Fuse is provided Efficiency Output Voltage Meets EISA2007, CEC Efficiency Level V, EU (EC) No 278/2009 Phase II See chart Output Power Ripple and Noise See chart 1% pk-pk max., 20MHz BW Line/Load Voltage Regulation Transient Response Line: +/- 1%, Load: +/-5% 500s max., 50% load step, typical Minimum Load Case Material Not required Black 94V0 Polycarbonate Case Dimensions Weight See outline drawing 400g MTBF Hold-up Time >100,000 hours (calculated) 18 ms min. @ 115Vac, 60 ms min. @ 240 Vac Overload Protection Hiccup Mode Short Circuit Protection Hiccup Mode Topology Switching - Fixed Frequency Flyback Safety Standards EN/IEC/CSA/UL60601-1 EMC Dielectric Withstand Operating Temperature See chart below Input-Output: 5,656Vdc, Input-GND: 1,500 Vac, Output-GND: 500Vdc 0 to 40C, no derating Storage Temperature Relative Humidity -30 to +85C 5% to 95%, non-condensing Altitude 0 to 10,000 ft Output Cable 5V - 9V models: #18AWG (UL2464), 1,200mm, 4 conductor 12V - 15V models: #18AWG (UL2464), 1,500mm, 4 conductor 18V - 24V models: #18AWG (UL2464), 1,500mm, 2 conductor Output Connector 5V model: Molex 39-01-2060 or equiv. (Ault #51) Other models: 2.5mm barrel type (Ault #3), center contact positive (+) EMC Specifications Conducted Emissions EN55011 Class B, FCC Part 15, Class B. Radiated Emissions EN55011 Class B, FCC Part 15, Class B. Line Frequency Harmonics EN61000-3-2, Class A Voltage Fluctuations/Flicker EN61000-3-3 Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11, Criteria A ______________________________________________________________________________________________________________________________ 1 of 2 SL Power Electronics Corp * 6050 King Drive Ventura, CA 93003 * Phone 805.486.4565 * Fax 858.712.2040 * Email: info@slpower.com * www.slpower.com MENB1060 Universal 60 Watt Series Medical Switch Mode Power Supply Model Number 3 Year Warranty Volts (V) Output Current (max) Max Watts Ripple (Vp-p max) 5V 7.00 A 35.0 W 50mV MENB1060A0903F01 9V 6.00 A 54.0 W 90mV MENB1060A1203F01 12 V 5.00 A 60.0 W 120mV MENB1060A1503F01 15 V 4.00 A 60.0 W 150mV MENB1060A1803F01 18 V 3.40 A 61.2 W 180mV MENB1060A2403F01 24 V 2.70 A 64.8 W 240mV MENB1060A0551F01 Model Number Key MENB 1 060 A VV 03 F 01 Model Input Connector: Output Connector: Output Voltage: Model Output Pow er: # of Outputs Product Fam ily: Input Receptacle Options IEC320 C14 IEC320 C18 Grounded Ungrounded (F) (Q) "01" = Standard. "02" and higher indicates a m odified m odel. "F" = IEC320 C14 grounded, Other options available, see next page. "03" = 2.5m m Barrel Type Connector. Other options available, contact factory. "05" = 5Vdc, "12" = 12Vdc, "24" = 24Vdc, etc. "A" = Original Configuration "060" = 60 Watts "1" = Single Output "M" = Medical, "E" = External, "NB" = Model Series Designator Output Connector Output Connector (5V Model) IEC320 C8 "Shaver" (N) Pins 1,4 = (+), Pins 3,6 = (-) Outline Drawing DATE CODE Dimensions are in mm (Cable length is 1200mm on 5V thru 12V models) Data Sheet (c) 2010 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 12-22-2010 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. ______________________________________________________________________________________________________________________________ 2 of 2 SL Power Electronics Corp * 6050 King Drive Ventura, CA 93003 * Phone 805.486.4565 * Fax 858.712.2040 * Email: info@slpower.com * www.slpower.com