OVERALL STABILITY OPTIONS 1 Value Unit Storage Temperature Range Tstg -65 to +125 o Operating Temperature Range Top 0 to +70 o Input Voltage VCC +5 Remarks 500 kHz to 20MHz mA Max 20.1MHz to 80MHz 80.1MHz to 160MHz 40 Duty Ratio SY 45:55 % "O" Level VOL 0.5 V DC Max "1" Level VOH 4.5 V DC Min Start-Up Time TSTART 500 kHz to 20MHz nS Max 20.1MHz to 70MHz 70.1MHz to 160MHz 4 TTL Waveform - Drop Module onto a hard wooden surface from 20cm 3 times Vibration Test - Vibrations with an amplitude of 3mm and a sweep from 10-55 Hz duration 1 minute shall be applied for 2 hours in each of the x,y, & z axes ENVIRONMENTAL - Immerse pins to within 1mm of glass stand-offs in solder bath of 280oC Tf TITLE: AEL o PART N Active Active High Z Tr Tr Symmetry = t x 100 T "1"-LEVEL 1.4V DC 0 VDC t T o - After exposure to -40 C for 2 hrs - After exposure to +40oC 90-95% RH for 48 Hrs - After 10 cycles of exposure to -55oC & 125oC with 10mins exposure at each extreme 8 Fine Leak Open "1" (VIH 2.2V) "0" (VIL 0.8V) "0"-LEVEL 10oC for 10 secs o Life Test - After exposure to +125 C (Power Applied) for 1000 Hrs Thermal Shock OUTPUT (Pin 5) +VDD Shock Test - 1500g (Peak) 0.35mS ( 1/2Sine Wave) 5 Times Humidity INH (Pin 1 Tf MECHANICAL Cold Resistance Enable/Disable Ground Output +V DC HCmos 1-10 TTL Solder Heat = = = = mS 5 15pF Min Drop Test 1 4 5 8 Enable/Disable Function At 50% VDD 10 6 Pin Pin Pin Pin 10% V DC ICC Tr:Tf Pin Connections 6.8 C Max Input Current Max Rise/Fall Time 0.8 C 20 50 5.08 Code 15.24 20.8 Stability options are inclusive of: Calibration Tolerance at 25oC, Operating Temperature Range, Supply Voltage Change, Load Change, Ageing, Shock & Vibration. Parameter 7.62 9711A = 25PPM 9711B = 50PPM 9711C = 100PPM 400kHz ~ 160MHz Note 12.9 FREQUENCY RANGE - Helium leak detector, pressure 5kg.f/cm3 for 2 Hrs, leakage less than 1 x 10- ISOQAR QUALITY ASSURED FIRM Atm.cc/Sec ISO 9002 Crystal Oscillator 14-Pin DIL UNIVERSAL O/P (Hcmos & TTL) 500kHz to 100MHz With enable/disable Issue Number Issue Date Approved 22/05/98 GR AEL 9711CSN 3 www.aelcrystals.co.uk NATIONAL ACCREDITATION OFCERTIFICATION BODIES Certificate No. 733/95 Module 'D' Airtech 2 Jenner Road, Crawley W. Sussex. RH10 2GA T e l : 0 1293 524245 Fax: 01293 524888 Not to be reproduced without permission of AEL Crystals Ltd