Drawn By: D.Ladd Issue 4 Date: 17/01/13
Checked: P.Dixon
Faraday Rd, Dorcan, Swindon
SN3 5HH
This drawing is subject to change without notice, contact your nearest field representative for the latest revision.
Specification
Control
Drawing
000W280
000W280 Electrical Shielding Tape
Product Dimensions:
Tape Width : 25 mm nom
Tape Length : 4.5 m nom
Product Description:
This Electrical Shielding Tape is an
open weave, all metal shielding braid
tape constructed in a flat cable like form.
The open knit weave allows it to
conform closely to substrates.
Features:
Tinned copper conductors
Compatible with power cable insulations
Elongates easily to conform to irregular substrates
Owing to its construction the tape interlocks with the preceding layer providing a tight wrap (no solder
bead is required).
Stable at elevated temperature
Oil resistant
Applications:
Provides shielding for cable joints on shielded power cables.
Makes the conductive portion of the stress cone on power cable terminations.
Properties:
Property (Test method)
Typical value
Thickness (ASTM-D-1000-76)
0.016 inches (0.41 mm)
Breaking Strength (ASTM-D-1000-76)
22lb/inch (3.93MPa)
Elongation (ASTM-D-1000-76)
70%
Water absorption
0%
Note: This Electrical Shielding Tape should not be used as a jumper wire or grounding strap.
Ordering: 000W280 (569741-000) 4.5m x 25mm roll.
Copyright: This drawing is the property of TE Connectivity Ltd. It is issued on condition that it is not copied, reproduced or passed on to any third party without
the prior written consent of TE Connectivity Ltd.
