Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi2-M12-AD4X-H1141 M12 x 1 36 52 17/4 LED threaded barrel, M12 x 1 chrome-plated brass 2-wire DC, 10...65 VDC normally open connector M12 x 1 Wiring diagram 9 M12 x 1 Type Ident-No. Bi2-M12-AD4X-H1141 44065 Rated operating distance Sn Mounting mode Hysteresis (switching distance) Min. repeat accuracy Temperature drift Operating temperature 2 mm flush 1... 15 % 2 % 10 % -25 ...+ 70 C Rated operational voltage (DC) UB 10... 65 VDC Max. ripple 10 % Upp Rated operational current (DC) Ie 100 mA Max. OFF-state current Max. switching frequency Rated insulation voltage Short-circuit protection Max. voltage drop at Ie 0,6 mA 1 kHz 0,5 kV yes, cyclic 5 V Min. operational current Im 3 mA Housing style Dimensions Housing material Active face Max. fixing torque of coupling nut Wiring Vibration resistance Shock resistance Degree of protection threaded barrel; M12 x 1 52 mm metal, CuZn, chrome-plated plastic, PA12-GF30 10 Nm connector, M12 x 1 55 Hz (1 mm) 30 x g (11 ms) IP67 Switching status indication LED yellow 3 BN + () 4 BU (+) Function principles Inductive proximity switches are designed for wear-free non-contact detection of metal objects. For this they use a high-frequency electro-magnetic AC field that interacts with the target. With inductive sensors, this field is generated by an LC resonant circuit with a ferrite core coil. Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi2-M12-AD4X-H1141 Mounting instructions Gap D Gap W Gap T Gap S Gap G minimum gap 2xB 3 x Sn 3xB 1,5 x B 6 x Sn Diameter of active face B O 12 mm G S D T W Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor Bi2-M12-AD4X-H1141 Accessories Typ QM-12 IdentNo. 6945101 Description Dimension drawing quick-mount fixing clamp with dead-stop; material: chrome-plated brass external thread M16 x 1 22/4 o 12 BST-12B 6947212 19,5 34 fixing clamp with dead-stop; material: PA6 M5 20 28 40 18 o 12 30 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264