Product Data Sheet
A Regal Brand
www.marathonsp.com 1
141X205
Replace “x” with 1, 2, 3 or 4 for number of poles
Power Terminal Block
115 Amps 600 Volts AC/DC
Wire Range
• Line: (1) #2 - #14 AWG
• Load: (1) #10 - 32 Tapped Hole and (2) Quick Connects
Electrical Ratings
• 115 Amps
• 600V per UL 1059 & CSA 22.2 No.158, class B & C requirements
• SCCR of 10,000 A (default for terminal blocks).
• CU7AL - 75°C connector terminal rating with copper or aluminum wire
• Factory & Field Wiring
Agency Compliance
• UR - UL Recognized Terminal Block, Evaluated to UL 1059, File No.XCFR2.E62806
• CSA - certifed to C22.2 No. 158, File No. LR19766 (wire classes B & C only)
• CE compliant to IEC 60947-7-1
Material Information
• Insulator base:
• Thermoplastic
• Flammability rating of insulator base UL94V0
• Insulator base temperature rating: -40°C to 125°C (UL RTI)
• Connector: aluminum, tin plated
• Quick connect: copper, tin plated
• Terminal screws: steel, nickel plated
• Connector mounting screws: steel, zinc plated
• RoHS compliant
www.marathonsp.com 2PDS 0353 REV-C 12/16/16
Termination Specications
Line Side Wire Size
(CU Stranded) Torque Wires /
Terminal Wire Class (UL) 1
2 5.6 N·m (50 lbf·in) 1 B, C
4 - 6 5.1 N·m (45 lbf·in) 1 B, C, G, H, I (DLO)
8 4.5 N·m (40 lbf·in) 1 B, C, G, H, I (DLO)
10 - 14 4 N·m (35 lbf·in) 1 B, C, I (DLO)
• Aluminum wire range: 2 - 12 AWG
• Solid copper wire range: 10 - 14 AWG
• Wire strip length: 9/16in. (14mm)
• Terminal screw drive: slotted
• 1 For information on copper stranded wire classes please visit:
http://www.marathonsp.com/exible-stranded-wire.php
Load Side Termination
Type Torque Tap Depth Maximum
Lug Width
(2) Female 1/4”
quick connects
(for #10 max
wire)
n/a n/a n/a
Listed lugs
anchored with
10 - 32 screws
2.8 N·m
(25 lbf·in)
0.16”
(4mm)
0.16”
(4mm)
• For use with conductors prepared with listed connectors such as single hole compression/crimp lugs or
listed ring, fork or spade terminals.
• Conductor size, ampacity, temperature rating and type are dictated by the ratings of the listed lugs utilized
and applicable code requirements.
www.marathonsp.com 3PDS 0353 REV-C 12/16/16
Installation & Accessories
Drawing
• Mounting(Panel):
• For use with #10 fastener.
• Recommended mounting torque: 25-30 lbf·in (2.8 - 3.4 N·m).
• Covers:
• Snap-on covers available upon request
• Catalog Number: CC141x (replace “x” with number of poles)
• Covers are semiclear polycarbonate
• Accessory covers are not intended to provide insulation for electrical spacings.