TDR 3-1211WI - TRACO Power

www.tracopower.com Page 1 of 4

DC/DC Converters

TDR 3WI Series, 3 Watt

Features

◆ Compact design in SMD or DIP package

◆ Ultra wide 4:1 input voltage range

◆ Fully regulated outputs

◆ Low ripple and noise

◆ No minimum load required

◆ Temperature range –40°C to +85°C

◆ I/O isolation 1600 VDC

◆ Continuous short-circuit protection

◆ Remote On/Off control

◆ Fully RoHS compliant

◆ 3-year product warranty The TDR-3WI series is a family of compact 3 W DC/DC converters with 4:1 input

voltage ranges and tightly regulated output voltages even under no load conditions.

The product is available in SMD-package or in DIP-package. They work with high

efﬁciency over the full load range and come with a remote On/Off input.

The usability in temperature ranges of up to +85°C, continuous short circuit protec-

tion and excellent immunity against environmental inﬂuences make these converters

very reliable.

A TDR-3WI converter is the ideal solution for space critical high end applications in

communication equipment, instrumentation and industrial electronics.

Order code

DIP models

Order code

SMD models Input voltage range Output voltage Output current

max. Efﬁciency typ.

TDR 3-1211WI TDR 3-1211WISM 5.0 VDC 600 mA 81 %

TDR 3-1212WI TDR 3-1212WISM 12 VDC 250 mA 82 %

TDR 3-1213WI TDR 3-1213WISM 4.5 – 18 VDC 15 VDC 200 mA 82 %

TDR 3-1222WI TDR 3-1222WISM (12 VDC nominal) ±12 VDC ±125 mA 82 %

TDR 3-1223WI TDR 3-1223WISM ±15 VDC ±100 mA 81 %

TDR 3-2411WI TDR 3-2411WISM 5.0 VDC 600 mA 80 %

TDR 3-2412WI TDR 3-2412WISM 12 VDC 250 mA 82 %

TDR 3-2413WI TDR 3-2413WISM 9 – 36 VDC 15 VDC 200 mA 82 %

TDR 3-2422WI TDR 3-2422WISM (24 VDC nominal) ±12 VDC ±125 mA 82 %

TDR 3-2423WI TDR 3-2423WISM ±15 VDC ±100 mA 81 %

TDR 3-4811WI TDR 3-4811WISM 5.0 VDC 600 mA 80 %

TDR 3-4812WI TDR 3-4812WISM 12 VDC 250 mA 83 %

TDR 3-4813WI TDR 3-4813WISM 18 – 75 VDC 15 VDC 200 mA 82 %

TDR 3-4822WI TDR 3-4822WISM (48 VDC nominal) ±12 VDC ±125 mA 82 %

TDR 3-4823WI TDR 3-4823WISM ±15 VDC ±100 mA 81 %

Models

UL 60950-1

www.tracopower.com Page 2 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

TDR 3WI Series 3 Watt

Input Specifications

Input current at no load (nominal input voltage) 12 Vin models: 40 mA typ.

24 Vin models: 20 mA typ.

48 Vin models: 13 mA typ.

Input current at full load (nominal input voltage) 12 Vin models: 330 mA typ.

24 Vin models: 165 mA typ.

48 Vin models: 80 mA typ.

Surge voltage (1 s max.) 12 Vin models: 25 V max.

24 Vin models: 50 V max.

48 Vin models: 100 V max.

EMC emissions EN 55032 class A/B (with external components)

– Application note for filter class A/B proposal www.tracopower.com/overview/tdr3wi

ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

Radiated immunity EN 61000-4-3 10 V/m, perf. criteria A

Fast transient / Surge EN 61000-4-4, ±2 kV, perf. criteria A

EN 61000-4-5, ±1 kV perf. criteria A

with external input capacitor e.g. Nippon

chemi-con KY 220 µF, 100 V, ESR 48 mOhm

Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

Power frequency magnetic field EN 61000-4-8, 100 A/m, perf. criteria A

Reflected ripple current 12 Vin models: 80 mAp-p typ.

(measured with input filter according class A) 24 Vin models: 40 mAp-p typ.

48 Vin models: 30 mAp-p typ.

Output Specifications

Voltage set accuracy ±1 % max

Regulation – Input variation (Vin min. to Vin max.) 0.2 % max.

– Load variation (0 – 100 %) single output models: 1.0 % max.

dual output models: 1.0 % max. balanced load

– Load variation (10 – 90 %) single output models: 0.5 % max.

dual output models: 0.8 % max. balanced load

– Load cross regulation (25 / 100 %) 5.0 % max. (dual output models)

Minimum load 0 % of rated max. load

Temperature coefficient ±0.02 %/K

Ripple and noise (20 MHz bandwidth) 30 mVp-p typ.

Start up time – Power On 5 ms typ.

(constant resistive load) – Remote On 5 ms typ.

Transient response setting time (25 % load step change) 250 µs typ.

Short circuit protection continuous, automatic recovery

Capacitive load 5 Vout models: 1680 µF max.

12 Vout models: 820 µF max.

15 Vout models: 680 µF max.

±12 Vout models: 470 µF max. (each output)

±15 Vout models: 330 µF max. (each output)

General Specifications

Temperature ranges – Operating –40°C to +85°C

– Storage –55°C to +125°C

– Case temperature –40°C to +100°C

Load derating 3.3 %/K above +70°C

www.tracopower.com Page 3 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

TDR 3WI Series 3 Watt

Supporting documents:

www.tracopower.com/overview/tdr3wi and www.tracopower.com/overview/tdr3wism

General Specifications (continued)

Humidity (non condensing) 5 – 95 % rel. H max.

Thermal shock acc. MIL-STD-810F

Vibration acc. MIL-STD-810F

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >5.7 Mio h

Isolation voltage (60 s) – Input/Output 1600 VDC

Isolation capacitance – Input/Output 50 pF max.

Isolation resistance – Input/Output (500 VDC) >1 GOhm

Safety approvals – UL/cUL 60950 -1 www.ul.com -> certifications -> File e188913

– Certification documents www.tracopower.com/overview/tdr3wi

Switching frequency 100 kHz min.

Remote On/Off – On: open or high impedance

– Off: 2...4 mA current applied via 1KOhm resistor

– Off stand by input current 2.5 mA max.

Environmental compliance – Reach

www.tracopower.com/products/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

Pysical Specifications

Casing material non-conductive plastic (UL94V-0 rated)

Package weight 4.5 g ( 0.16 oz)

Soldering profile (for DIP models) 265°C / 10 s max. (wave soldering)

Lead-free reflow solder process (for SMD models) J-STD-020D

Moisture sensivity level (for SMD models) J-STD-033C level 2a

Packaging – Tube 10 pcs packing unit

– Tape & Reel (only SMD models, add suffix –TR) 200 pcs packing unit

Page 4 of 4

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

www.tracopower.com

DC/DC Converters

TDR 3WI Series 3 Watt

Outline Dimensions

Pin Single Dual

1–Vin (GND) –Vin (GND)

2Remote On/Off Remote On/Off

6NC Common

7NC –Vout

8+Vout +Vout

9–Vout Common

14 +Vin (Vcc) +Vin (Vcc)

Pin-Out

Rev. April 17. 2018

Dimensions in [mm], () = Inch

Tolerances: ±0.5 (±0.02)

Pin pich tolerances: ±0.25 (±0.01)

18.9

8.7

12.8

13.55

(0.74)

(0.35)

(0.533)

(0.50)

3.8

(0.15)

0.8(0.03)

1.3(0.05)

top view

2.542.54 10.161.8

(0.07)

(0.1) (0.4) (0.1)

0.25 (0.01)

0-15°

2.542.54 10.161.8

18.9

8.7 12.8

17.2

(0.07)

(0.1) (0.4)

(0.74)

(0.35)

(0.68)

(0.50)

(0.1)

1.0 (0.04)

1.5 (0.06)

top view

7.4 (0.29)

0.25 (0.01)

0-4°

1.2

(0.05)

DIP-Models

SMD-Models

NC = not to connect

Recommended Solder Pad

Dimension:

18.1 (0.71)

2.542.54 10.161.8

(0.07) (0.1) (0.4) (0.1)

1.8 (0.07)

2.0 (0.08)

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TRACO Power:

TDR 3-1211WISM TDR 3-2411WISM TDR 3-2412WISM TDR 3-1223WISM TDR 3-4811WISM TDR 3-1213WISM

TDR 3-2413WISM TDR 3-4812WISM TDR 3-4823WISM TDR 3-4822WISM TDR 3-1222WI TDR 3-2422WI TDR 3-

2413WI TDR 3-2411WI TDR 3-1211WI TDR 3-4822WI TDR 3-2422WISM TDR 3-1223WI TDR 3-2412WI TDR 3-

4812WI TDR 3-1212WISM TDR 3-1222WISM TDR 3-2423WISM TDR 3-4813WISM TDR 3-4811WI TDR 3-4813WI

TDR 3-2423WI TDR 3-4823WI TDR 3-1213WI TDR 3-1212WI