HARTING Ha-VIS eCon Switches Ha-VIS eCon 3000 Full Gigabit Ethernet Basic PoE / PoE+ 5 to 7 Ethernet ports RJ45, SC/LC (SFP) and PoE / PoE+ Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control cabinets Commercial Temp.: 0 C ... +55 C / Industrial Temp.: -40 C ... +70 C Energy Efficient Ethernet Energy supply of up to 4 terminal devices via PoE+ (137 watts) acc. to IEEE 802.3at Full gigabit Ethernet, non-blocking switch architecture acc. to IEEE 802.3 Support of jumbo frames Variants with industrial temperature range of -40C ... +70 C Surge protection and reverse polarity protection Minimum energy consumption due to Energy-Efficient Ethernet Optimised DIN rail bracket Target markets Machinery & Robotics Wind Energy Solar Energy Industrial network infrastructures Automation technology Transportation Shipbuilding General description The Ha-VIS eCon 3000 Full Gigabit family of unmanaged Ethernet switches is equipped with up to 7 gigabit Ethernet ports and allow for cost-efficient and quick expansion and/or reconstruction of network infrastructures with high bandwidth requirements. In this, all switches support extra-long Ethernet frames (jumbo frames). The switches work as power sourcing equipment (PSE) and are capable of simultaneously providing the full PoE output of 34.2 watts on up to four ports. The slender design of the switches enables an extremely high packing density on the DIN rail. Various combinations of variants with RJ45, fibre optic cables and SFP ports are available. Automatic detection of the transmission rate (auto-negotiation) and of the wiring of the twisted pair data cable (autopolarity and autoMDI(X)) allow for simple plug & play. All variants are available with the temperature ranges Industrial" and Commercial". Technical characteristics Switch Features Ethernet Ports 10BASE-Te / 100BASE-TX EEE / 1000BASE-T EEE Enclosures width 25 mm Number of ports 5, 6, 7 Connection type Auto-negotiation RJ45 Yes Yes Switching technology Store and Forward Auto-polarity Supported standards IEEE 802.3 Auto-MDI(X) Frame Size 10 kbytes MAC table size Packet buffer size Transfer conditions 8k entries 1 Mbit Transfer speed Transfer length Non-blocking Yes Quality of service Yes Energy-Efficient Ethernet Yes PROFINET compatible Yes EthernetIP compatible Yes Voltage supply Nominal voltage 48 VDC 54 VDC Permissible voltage range 44 VDC ... 57 VDC 50 VDC ... 57 VDC Surge protection Yes Reverse polarity proof Yes Starting current 6.40 A 7.20 A Overcurrent protection at input Yes (12 A) Max. power consumption without PoE 3,84 W ... 4.56 W Cross-section / Wire gauge 0.08 mm ... 2.5 mm (28 AWG ... 12 AWG) Connection type 3-pole, pluggable screwed contact Pinout Supply circuit (acc. to 60950) +/-/ SELV (circuit breaker 10 A) HARTING Technology Group P.O.Box 1473, D-32325 Espelkamp Wilhelm-Harting-Strae 1, D-32325 Espelkamp, Germany ICPN-Service@harting.com | Service hotline: +49 5772 47-9479 Fax: +49 5772 47-495 | www.HARTING.com/de/ethernet-switches Yes Twisted Pair 10 / 100 / 1000 Mbit/s 100 m (twisted pair, Cat 5) Ethernet Ports 1000BASE-SX / 1000BASE-LX Type of fibre Multimode (MM) Connection type Transfer conditions Wavelength Transfer speed Transfer length Output power Input sensitivity Singlemode (SM) SC Duplex FO 850 nm 1310 nm 1000 Mbit/s 0.55 km 10 km -9.5 dBm ... -3 dBm -9.5 dBm ... -4 dBm -17 dBm -21 dBm SFP ports Transfer standard Connection type Transfer conditions Depending on used SFP Depending on used SFP, RJ45 or LC Depending on used SFP, TP or FO Transfer speed Depending on used SFP, 100 or 1000 Mbit/s Transfer length Depending on used SFP Note: We reserve the right to make technical changes to the products and to the content of this document at any time without prior notification. The HARTING Technologiegruppe does not accept any responsibility for possible errors or incompletions in this document. We reserve all the rights to this document and the topics and illustrations contained within it. Copying, disclosure to third parties or use of its content - even partially - is forbidden without the prior written consent of the HARTING Technologiegruppe. PoE PoE Number of PoE ports Ambient conditions PoE+ 4 Standard IEEE 802.3af / IEEE 802.3at PoE type PSE Supported mode Supply voltage PSE Max. current consumption PSE Max. current Alternative A Supported cabling 48 VDC 54 VDC 1380 mA 2380 mA 375 mA 638 mA 15.4 W per port 34.2 W per port 61.6 W total 136.8 W total See 802.3at, section 33.1.4 PoE pinout Alternative A, MDI-X (1/2 = V-, 3/6 = V+) Maximum output power PSE Status and diagnostic displays Power (Pwr") lights up green Link/Activity (L/A") off Link/Activity (L/A") lights up green Link/Activity (L/A") flashes green Link speed (Spd") off Link speed (Spd") lights up yellow Link speed (Spd") lights up green PoE status off PoE status lights up green Supply voltage is applied No link Link is active Link is active and data is transferred 10 Mbit/s 100 Mbit/s 1000 Mbit/s PoE is inactive / low voltage Voltage in PoE range PoE status lights up blue Voltage in PoE+ range PoE status lights up red Error Commercial temperature range Industrial temperature range Storage temperature range Relative humidity (operation) Relative humidity (storage and transport) Air pressure (operation) 0 C ... +55 C -40 C ... +70 C -40 C ... +85 C 0 % ... 95 % (not-condensing) 0 % ... 95 % (not-condensing) 2000 m (795 hPa) Approvals CE, FCC CFR 47 Part 15, cUL US 508 listed, DNV GL, LR, NK, ABB IIT EMC and environmental conditions EMC Interference immunity (EN 61000-6-1, 61 000-6-2 55024) Electrostatic discharge (ESD) EN 61 000-4-2 Electromagnetic field EN 61 000-4-3 Rapid transients (burst) EN 61 000-4-4 Surge voltages EN 61 000-4-5 Conducted interference voltages EN 61 000-4-6 EMC Interference emission (EN 61000-6-4, EN 55 032, FCC CFR 47 Part 15) Mechanical stability (EN 60721-3) IEC 60068-2-6 Vibration IEC 60068-2-6 Vibration resonance search IEC 60068-2-27 Shock test Included in delivery Pluggable screw contact for voltage supply Assembly instruction Enclosures Enclosures width Dimensions H x W x D (without pluggable screw contact and holding bracket) Weight Type of installation 25 mm Drawings 142 mm x 25 mm x 107.5 mm 498 g ... 531 g 35 mm DIN rail acc. to EN 60 715 Anodised aluminium / Powder-coated steel sheet Material enclosures Protection degree (withplugged screw contact) Protection class IP30 III Technical characteristics / order information Ports / order information RJ45 Enclosures width Current consumption @ 54 VDC with PoE Commercial Temp.: 0 C ... +55 C MTBF in Mio. h Switch Part no. Industrial Temp.: -40 C ... +70 C SFP SC Switch Part no. 4 - 1x MM (0.55 km) 25 mm 2.42 A 1.13 Ha-VIS eCon 3041GB-AD-P 24 03 404 1130 Ha-VIS eCon 3041GBT-AD-P 24 03 404 1120 4 - 1x SM (10 km) 25 mm 2.42 A 1.13 Ha-VIS eCon 3041GB-AF-P 24 03 404 1230 Ha-VIS eCon 3041GBT-AF-P 24 03 404 1220 4 - 2x MM (0.55 km) 25 mm 2.44 A 1.11 Ha-VIS eCon 3042GB-AD-P 24 03 404 2130 Ha-VIS eCon 3042GBT-AD-P 24 03 404 2120 4 - 2x SM (10 km) 25 mm 2.44 A 1.11 Ha-VIS eCon 3042GB-AF-P 24 03 404 2230 Ha-VIS eCon 3042GBT-AF-P 24 03 404 2220 4 3 - 25 mm 2.44 A 0.70 Ha-VIS eCon 3043GB-AC-P 24 03 404 3330 Ha-VIS eCon 3043GBT-AC-P 24 03 404 3320 5 - - 25 mm 2.42 A 1.08 Ha-VIS eCon 3050GB-A-P 24 03 405 0030 Ha-VIS eCon 3050GBT-A-P 24 03 405 0020 5 - 1x MM (0.55 km) 25 mm 2.44 A 1.06 Ha-VIS eCon 3051GB-AD-P 24 03 405 1130 Ha-VIS eCon 3051GBT-AD-P 24 03 405 1120 5 - 1x SM (10 km) 25 mm 2.44 A 1.06 Ha-VIS eCon 3051GB-AF-P 24 03 405 1230 Ha-VIS eCon 3051GBT-AF-P 24 03 405 1220 5 6 6 7 2 1 - - 25 mm 25 mm 25 mm 25 mm 2.45 A 2.43 A 2.45 A 2.45 A 0.68 1.01 0.66 0.63 Ha-VIS eCon 3052GB-AC-P Ha-VIS eCon 3060GB-A-P Ha-VIS eCon 3061GB-AC-P Ha-VIS eCon 3070GB-A-P 24 03 405 2330 24 03 406 0030 24 03 406 1330 24 03 407 0030 Ha-VIS eCon 3052GBT-AC-P Ha-VIS eCon 3060GBT-A-P Ha-VIS eCon 3061GBT-AC-P Ha-VIS eCon 3070GBT-A-P 24 03 405 2320 24 03 406 0020 24 03 406 1320 24 03 407 0020 Copyright(c) 2014 HARTING Technology Group All rights reserved Date of issue 06.2018 ICPN Datasheet 0850/02