DATA SH EET
Product specification
File under Integrated Circuits, IC06 September 1993
INTEGRATED CIRCUITS
74HC/HCT4067
16-channel analog
multiplexer/demultiplexer
For a complete data sheet, please also download:
The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications
The IC06 74HC/HCT/HCU/HCMOS Logic Package Information
The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
September 1993 2
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
FEATURES
Low “ON” resistance:
80 (typ.) at VCC = 4.5 V
70 (typ.) at VCC = 6.0 V
60 (typ.) at VCC = 9.0 V
typical “break before make” built-in
Output capability: non-standard
ICC category: MSI
GENERAL DESCRIPTION
The 74HC/HCT4067 are high-speed Si-gate CMOS
devices and are pin compatible with the “4067” of the
“4000B” series. They are specified in compliance with
JEDEC standard no. 7A.
The 74HC/HCT4067 are 16-channel analog
multiplexers/demultiplexers with four address inputs (S0to
S3) , an active LOW enable input (E), sixteen independent
inputs/outputs (Y0to Y15) and a common input/output (Z).
The ”4067” contains sixteen bidirectional analog switches,
each with one side connected to an independent
input/output (Y0to Y15) and the other side connected to a
common input/output (Z).
With E LOW, one of the sixteen switches is selected (low
impedance ON-state) by S0to S3. All unselected switches
are in the high impedance OFF-state. With E HIGH, all
switches are in the high impedance OFF-state,
independent of S0to S3.
The analog inputs/outputs (Y0to Y15, and Z) can swing
between VCC as a positive limit and GND as a negative
limit. VCC to GND may not exceed 10 V.
QUICK REFERENCE DATA
GND = 0 V; Tamb = 25 °C; tr= tf= 6 ns
Notes
1. CPD is used to determine the dynamic power dissipation (PDin µW):
PD= CPD ×VCC2×fi+∑{(CL+CS)×VCC2×fo} where:
fi= input frequency in MHz
fo= output frequency in MHz
{(CL+CS)×VCC2×fo} = sum of outputs
CL= output load capacitance in pF
CS= max. switch capacitance in pF
VCC = supply voltage in V
2. For HC the condition is VI= GND to VCC
For HCT the condition is VI= GND to VCC 1.5 V
SYMBOL PARAMETER CONDITIONS TYPICAL UNIT
HC HCT
tPZL/ tPZH turn-on time CL= 15 pF; RL=1 k; VCC = 5 V
E to Vos 26 32 ns
Snto Vos 29 33 ns
tPLZ/ tPHZ turn-off time
E to Vos 27 26 ns
Snto Vos 29 30 ns
CIinput capacitance 3.5 3.5 pF
CPD power dissipation capacitance per switch notes 1 and 2 29 29 pF
CSmax. switch capacitance
independent (Y) 5 5 pF
common (Z) 45 45 pF
September 1993 3
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
ORDERING INFORMATION
See
“74HC/HCT/HCU/HCMOS Logic Package Information”
.
PIN DESCRIPTION
PIN NO. SYMBOL NAME AND FUNCTION
1 Z common input/output
9, 8, 7, 6, 5, 4, 3, 2, 23, 22, 21, 20, 19, 18, 17, 16 Y0to Y15 independent inputs/outputs
10, 11, 14, 13 S0to S3address inputs
12 GND ground (0 V)
15 E enable input (active LOW)
24 VCC positive supply voltage
Fig.1 Pin configuration. Fig.2 Logic symbol. Fig.3 IEC logic symbol.
September 1993 4
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
APPLICATIONS
Analog multiplexing and demultiplexing
Digital multiplexing and demultiplexing
Signal gating
Fig.4 Functional diagram.
Fig.5 Schematic diagram (one switch).
FUNCTION TABLE
Notes
1. H = HIGH voltage level
L = LOW voltage level
X = don’t care
INPUTS CHANNEL
ON
ES
3S
2S
1S
0
L
L
L
L
L
L
L
L
L
L
L
L
L
L
H
H
L
H
L
H
Y
0
Z
Y
1
Z
Y
2
Z
Y
3
Z
L
L
L
L
L
L
L
L
H
H
H
H
L
L
H
H
L
H
L
H
Y
4
Z
Y
5
Z
Y
6
Z
Y
7
Z
L
L
L
L
H
H
H
H
L
L
L
L
L
L
H
H
L
H
L
H
Y
8
Z
Y
9
Z
Y
10 Z
Y11 Z
L
L
L
L
H
H
H
H
H
H
H
H
L
L
H
H
L
H
L
H
Y12 Z
Y13 Z
Y14 Z
Y15 Z
H X X X X none
September 1993 5
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
Fig.6 Logic diagram.
September 1993 6
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
RATINGS
Limiting values in accordance with the Absolute Maximum System (IEC 134)
Voltages are referenced to GND (ground = 0 V)
Note
1. To avoid drawing VCC current out of terminal Z, when switch current flows in terminals Yn, the voltage drop across
the bidirectional switch must not exceed 0.4 V. If the switch current flows into terminal Z, no VCC current will flow out
of terminals Yn. In this case there is no limit for the voltage drop across the switch, but the voltages at Ynand Z may
not exceed VCC or GND.
RECOMMENDED OPERATING CONDITIONS
SYMBOL PARAMETER MIN. MAX. UNIT CONDITIONS
VCC DC supply voltage 0.5 +11.0 V
±IIK DC digital input diode current 20 mA for VI<−0.5 or VI>VCC +0.5 V
±ISK DC switch diode current 20 mA for VS<−0.5 or VS>VCC +0.5 V
±ISDC switch current 25 mA for 0.5 V <VS<VCC +0.5 V
±ICC; ±IGND DC VCC or GND current 50 mA
Tstg storage temperature range 65 +150 °C
Ptot power dissipation per package for temperature range: 40 to +125 °C
74HC/HCT
plastic DIL 750 mW above +70 °C: derate linearly with 12 mW/K
plastic mini-pack (SO) 500 mW above +70 °C: derate linearly with 8 mW/K
PSpower dissipation per switch 100 mW
SYMBOL PARAMETER 74HC 74HCT UNIT CONDITIONS
min. typ. max. min. typ. max.
VCC DC supply voltage 2.0 5.0 10.0 4.5 5.0 5.5 V
VIDC input voltage range GND VCC GND VCC V
VSDC switch voltage range GND VCC GND VCC V
Tamb operating ambient temperature range 40 +85 40 +85 °C see DC and AC
CHARACTER-
ISTICS
Tamb operating ambient temperature range 40 +125 40 +125 °C
tr,t
finput rise and fall times 6.0 1000
500
400
250
6.0 500 ns VCC = 2.0 V
VCC = 4.5 V
VCC = 6.0 V
VCC = 10.0 V
September 1993 7
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
DC CHARACTERISTICS FOR 74HC/HCT
For 74HC: VCC GND = 2.0, 4.5, 6.0 and 9.0 V
For 74HCT: VCC GND = 4.5 V
Notes
1. At supply voltages (VCC GND) approaching 2 V, the analog switch ON-resistance becomes extremely non-linear.
Therefore it is recommended that these devices be used to transmit digital signals only, when using these supply
voltages.
2. For test circuit measuring RON see Fig.7.
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HC/HCT VCC
(V) IS
(µA) Vis VI
+25 40 to +85 40 to +125
min. typ. max. min. max. min. max.
RON ON-resistance
(peak)
110
95
75
180
160
130
225
200
165
270
240
195
2.0
4.5
6.0
9.0
100
1000
1000
1000
VCC
to
GND
VIH
or
VIL
RON ON-resistance (rail) 150
90
80
70
160
140
120
200
175
150
240
210
180
2.0
4.5
6.0
9.0
100
1000
1000
1000
GND
or
VCC
VIH
or
VIL
RON maximum variation
of ON-resistance
between any two
channels
9
8
6
2.0
4.5
6.0
9.0
VCC
to
GND
VIH
or
VIL
Fig.7 Test circuit for measuring ON-resistance (RON).
Fig.8 Test circuit for measuring OFF-state current.
September 1993 8
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
Fig.9 Test circuit for measuring ON-state current.
Fig.10 Typical ON-resistance
(RON) as a function of
input voltage (Vis) for
Vis = 0 to VCC GND.
DC CHARACTERISTICS FOR 74HC
Voltages are referenced to GND (ground = 0 V)
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HC VCC
(V) VIOTHER
+25 40 to +85 40 to +125
min. typ. max. min. max. min. max.
VIH HIGH level input
voltage 1.5
3.15
4.2
6.3
1.2
2.4
3.2
4.7
1.5
3.15
4.2
6.3
1.5
3.15
4.2
6.3
V 2.0
4.5
6.0
9.0
VIL LOW level input
voltage 0.8
2.1
2.8
4.3
0.50
1.35
1.80
2.70
0.50
1.35
1.80
2.70
0.50
1.35
1.80
2.70
V 2.0
4.5
6.0
9.0
±IIinput leakage
current 0.1
0.2 1.0
2.0 1.0
2.0 µA 6.0
10.0 VCC
or
GND
±ISanalog switch
OFF-state current
per channel
0.1 1.0 1.0 µA 10.0 VIH
or
VIL
VS=
VCC GND
(see Fig.8)
±ISanalog switch
OFF-state current
all channels
0.8 8.0 8.0 µA 10.0 VIH
or
VIL
VS=
VCC GND
(see Fig.9)
±ISanalog switch
ON-state current 0.8 8.0 8.0 µA 10.0 VIH
or
VIL
VS=
VCC GND
(see Fig.9)
ICC quiescent supply
current 8.0
16.0 80.0
160 160
320 µA 6.0
10.0 VCC
or
GND
Vis = GND
or VCC;
Vos =V
CC
or GND
September 1993 9
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
AC CHARACTERISTICS FOR 74HC
GND = 0 V; tr=t
f= 6 ns; CL= 50 pF
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HC VCC
(V) OTHER
+25 40 to +85 40 to +125
min. typ. max. min. max. min. max.
tPHL/ tPLH propagation delay
Vis to Vos;
Ynto Z
25
9
7
5
75
15
13
9
95
19
16
11
110
22
19
14
ns 2.0
4.5
6.0
9.0 RL=;
CL= 50 pF
(see Fig.16)
tPHL/ tPLH propagation delay
Vis to Vos;
Z to Yn
18
6
5
4
60
12
10
8
75
15
13
10
90
18
15
12
ns 2.0
4.5
6.0
9.0
tPHZ/ tPLZ turn-off time
E to Yn
74
27
22
20
250
50
43
38
315
63
54
48
375
75
64
57
ns 2.0
4.5
6.0
9.0
RL=1k;
C
L= 50 pF
(see Fig.17)
tPHZ/ tPLZ turn-off time
Snto Yn
83
30
24
21
250
50
43
38
315
63
54
48
375
75
64
57
ns 2.0
4.5
6.0
9.0
tPHZ/ tPLZ turn-off time
EtoZ 85
31
25
24
275
55
47
42
345
69
59
53
415
83
71
63
ns 2.0
4.5
6.0
9.0
tPHZ/ tPLZ turn-off time
Snto Z 94
34
27
25
290
58
47
45
365
73
62
56
435
87
74
68
ns 2.0
4.5
6.0
9.0
tPZH/ tPZL turn-on time
E to Yn
80
29
23
17
275
55
47
42
345
69
59
53
415
83
71
63
ns 2.0
4.5
6.0
9.0
tPZH/ tPZL turn-on time
Snto Yn
88
32
26
18
300
60
51
45
375
75
64
56
450
90
77
68
ns 2.0
4.5
6.0
9.0
tPZH/ tPZL turn-on time
E to Z 85
31
25
18
275
55
47
42
345
69
59
53
415
83
71
63
ns 2.0
4.5
6.0
9.0
tPZH/ tPZL turn-on time
Snto Z 94
34
27
19
300
60
51
45
375
75
64
56
450
90
77
68
ns 2.0
4.5
6.0
9.0
September 1993 10
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
Note to AC CHARACTERISTICS FOR 74HC
1. Due to higher Z terminal capacitance (16 switches versus 1) the delay figures to the Z terminal are higher than those
to the Y terminal.
DC CHARACTERISTICS FOR 74HCT
Voltages are referenced to GND (ground = 0 V)
Note
1. The value of additional quiescent supply current (ICC) for a unit load of 1 is given here.
To determine ICC per input, multiply this value by the unit load coefficient shown in the table below.
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HCY VCC
(V) VIOTHER+25 40 to +85 40 to +125
min. typ. max. min. max. min. max.
VIH HIGH level input
voltage 2.0 1.6 2.0 2.0 V 4.5
to
5.5
VIL LOW level input
voltage 1.2 0.8 0.8 0.8 V 4.5
to
5.5
±IIinput leakage current 0.1 1.0 1.0 µA 5.5 VCC
or
GND
±ISanalog switch
OFF-state current per
channel
0.1 1.0 1.0 µA 5.5 VIH
or
VIL
VS=
VCC GND
(see Fig.8)
±ISanalog switch
OFF-state current
all channels
0.8 8.0 8.0 µA 5.5 VIH
or
VIL
VS=
VCC GND
(see Fig.9)
±ISanalog switch
ON-state current 0.8 8.0 8.0 µA 5.5 VIH
or
VIL
VS=
VCC GND
(see Fig.9)
ICC quiescent supply
current 8.0 80.0 160 µA 4.5
to
5.5
VCC
or
GND
Vis = GND or
VCC;V
os =V
CC
or GND
ICC additional quiescent
supply current per
input pin for unit load
coefficient is 1
(note 1)
100 360 450 490 µA 4.5
to
5.5
VCC
2.1
V
other inputs at
VCC or GND
INPUT UNIT LOAD COEFFICIENT
E
Sn
0.6
0.5
September 1993 11
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
AC CHARACTERISTICS FOR 74HCT
GND = 0 V; tr=t
f= 6 ns
Note
1. Due to higher Z terminal capacitance (16 switches versus 1) the delay figures to the Z terminal are higher than those
to the Y terminal.
SYMBOL PARAMETER
Tamb (°C)
UNIT
TEST CONDITIONS
74HCT VCC
(V) OTHER
+25 40 to +85 40 to +125
min. typ. max. min. max. min. max.
tPHL/ tPLH propagation delay
Vis to Vos;
Ynto Z
9 15 19 22 ns 4.5
RL=;
CL= 50 pF
(see Fig.16)
tPHL/ tPLH propagation delay
Vis to Vos;
Z to Yn
6 12 15 18 ns 4.5
tPHZ/ tPLZ turn-off time
E to Yn
26 55 69 83 ns 4.5
RL= 1 k;
CL= 50 pF
(see Fig.17)
tPHZ/ tPLZ turn-off time
Snto Yn
31 55 69 83 ns 4.5
tPHZ/ tPLZ turn-off time
E to Z 30 60 75 90 ns 4.5
tPHZ/ tPLZ turn-off time
Snto Z 35 60 75 90 ns 4.5
tPZH/ tPZL turn-on time
E to Yn
32 60 75 90 ns 4.5
tPZH/ tPZL turn-on time
Snto Yn
35 60 75 90 ns 4.5
tPZH/ tPZL turn-on time
E to Z 38 65 81 98 ns 4.5
tPZH/ tPZL turn-on time
Snto Z 38 65 81 98 ns 4.5
September 1993 12
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
ADDITIONAL AC CHARACTERISTICS FOR 74HC/HCT
Recommended conditions and typical values
GND = 0 V; tr=t
f= 6 ns
Notes
1. Vis is the input voltage at Ynor Z terminal, whichever is assigned as an input.
2. Vos is the output voltage at Ynor Z terminal, whichever is assigned as an output.
3. Adjust input voltage Vis is 0 dBm level (0 dBm = 1 mW into 600 ).
4. Adjust input voltage Vis is 0 dBm level at Vos for 1 MHz (0 dBm = 1 mW into 50 ).
SYMBOL PARAMETER TYP. UNIT VCC
(V) Vis(p-p)
(V) CONDITIONS
sine-wave distortion
f = 1 kHz 0.04
0.02 %
%4.5
9.0 4.0
8.0 RL= 10 k;C
L= 50 pF
(see Fig.14)
sine-wave distortion
f = 10 kHz 0.12
0.06 %
%4.5
9.0 4.0
8.0 RL= 10 k;C
L= 50 pF
(see Fig.14)
switch “OFF” signal
feed-through 50
50 dB
dB 4.5
9.0 note 3 RL= 600 ;C
L= 50 pF
f = 1 MHz (see Figs 11 and 15)
fmax minimum frequency response
(3 dB) 90
100 MHz
MHz 4.5
9.0 note 4 RL=50;C
L= 10 pF
(see Figs 12 and 13)
CSmaximum switch capacitance
independent (Y)
common (Z) 5
45 pF
pF
September 1993 13
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
Fig.11 Typical switch ”OFF” signal feed-through as a function of frequency.
Test conditions:
VCC = 4.5 V; GND = 0 V;
RL=50;R
source =1 k.
Fig.12 Typical frequency response.
Test conditions:
VCC = 4.5 V; GND = 0 V;
RL=50;R
source =1 k.
Fig.13 Test circuit for measuring minimum frequency response.
Adjust input voltage to obtain
0 dBm at Vos when fin = 1 MHz.
After set-up frequency of fin is
increased to obtain a reading of
3 dB at Vos.
September 1993 14
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
Fig.14 Test circuit for measuring sine-wave
distortion. Fig.15 Test circuit for measuring switch “OFF”
signal feed-through.
AC WAVEFORMS
Fig.16 Waveforms showing the input (Vis) to output
(Vos) propagation delays. Fig.17 Waveforms showing the turn-on and
turn-off times.
(1) HC : VM= 50%; VI= GND to VCC.
HCT : VM= 1.3 V; VI= GND to 3 V.
September 1993 15
Philips Semiconductors Product specification
16-channel analog
multiplexer/demultiplexer 74HC/HCT4067
TEST CIRCUIT AND WAVEFORMS
PACKAGE OUTLINES
See
“74HC/HCT/HCU/HCMOS Logic Package Outlines”
.
Fig.18 Test circuit for measuring AC performance.
Conditions
TEST SWITCH Vis
tPZH
tPZL
tPHZ
tPLZ
others
GND
VCC
GND
VCC
open
VCC
GND
VCC
GND
pulse
CL= load capacitance including jig and
probe capacitance (see AC
CHARACTERISTICS for values).
RT= termination resistance should be equal
to the output impedance ZOof the
pulse generator.
tr=t
f
= 6 ns, when measuring fmax, there is
no constraint on tr,t
fwith 50% duty
factor.
Fig.19 Input pulse definitions.
FAMILY AMPLI-
TUDE VM
tr,t
f
f
max;
PULSE WIDTH OTHER
74HC VCC 50% <2 ns 6 ns
74HCT 3.0 V 1.3 V <2 ns 6 ns