This is information on a product in full production.
April 2014 DocID15197 Rev 2 1/12
P010XX
Sensitive standard SCRs up to 0.8 A
Datasheet − production data
Features
•On-s tate rms current, 0.8 A
•Repeti tive peak off-state voltage up to 600 V
•Triggerin g gate current from 5 to 200 µA
•ECOPACK®2 compliant component
Description
Thanks to highly sensitive triggering levels, the
P010XX SCR series is suitabl e for all applications
where available gate current is limited, such as
ground fault circuit interrupters, pilo t circuits in
solid state relays, stand-by mode power supplies,
smoke and alarm detectors.
Available in through-hole or surface mount
packages, the voltage capability of this series has
been upgraded since its introduction and is now
available up to 600 V.
A
K
G
TO-92
(P010xxA) SOT-223
(P0102xN)
A
KG
A
A
KG
A
K
G
SOT23-3L
(P010xxL)
Table 1. Device summary
Symbol Value Unit
IT(RMS) up to 0.8 A
VDRM/VRRM up to 600 V
IGT From 5 to 200 µA
www.st.com
Characteristics P010xx
2/12 DocID15197 Rev 2
1 Characteristics
Table 2. Absolute rating s (limiting values) P010xxA and P010xxN
Symbol Parameter Value Unit
IT(RMS) On-state rms current (180 ° conduction angle) TO-92 Tl = 55 °C 0.8 A
SOT-223 Tamb = 70 °C
IT(AV) Average on-state current (180° conduction angle) TO-92 Tl = 55 °C 0.5 A
SOT-223 Tamb = 70 °C
ITSM Non repetitive surg e peak on-state current tp = 8.3 ms Tj = 25 °C 8A
tp = 10 ms 7
I²tI
²t value for fusing tp = 10 ms Tj = 25 °C 0.24 A2S
dI/dt Critical rate of ri se of on- state current
IG = 2 x IGT, tr ≤ 100 ns F = 60 Hz Tj = 125 °C 50 A/µs
IGM Peak gate current tp = 20 µs Tj = 125 °C 1 A
PG(AV) Avera ge gate power dissi pation Tj = 125 °C 0.1 W
Tstg
Tj
Storage junction temperat ure range
Operating junction temperature range - 40 to + 150
- 40 to + 125 °C
Table 3. Absolute ratings (limit ing values) P010xxL
Symbol Parameter Value Unit
IT(RMS) On-state rms current (180° conduction angle) Tamb = 36 °C 0.25 A
IT(AV) Average on-state current (180° conduction angle) Tamb = 36 °C 0.16 A
ITSM Non repetitive surge peak on-state current tp = 8.3 ms Tj = 25 °C 7A
tp = 10 ms 6
I²tI
²t value for fusing tp = 10 ms Tj = 25 °C 0. 18 A2S
dI/dt Critical rate of rise of on-stat e current
IG = 2 x IGT, tr ≤ 100 ns F = 60 Hz Tj = 125 °C 50 A/µs
IGM Peak gate current tp = 20 µs Tj = 125 °C 0.5 A
PG(AV) Average gate power dissipation Tj = 125 °C 0.02 W
Tstg
Tj
Storage junction temperature range
Operati ng junction tem perature r ange - 40 to + 150
- 40 to + 125 °C
DocID15197 Rev 2 3/12
P010xx Characteristics
12
Table 4. Ele ctrical characteri stics(1) P010xxA and P010xxN
Symbol Test conditi ons Val ue Unit
IGT VD = 12 V, RL = 140 ΩMax. 200 µA
VGT Max. 0.8 V
VGD VD = VDRM, RL = 3.3 kΩ, RGK = 1 kΩTj = 125 °C Min. 0.1 V
VRG IRG = 10 µA Min. 8 V
IHIT = 5 0 mA , R GK = 1 kΩMax. 5 mA
ILIG = 1 mA, RGK = 1 kΩMax. 6 mA
dV/dt VD = 67% VDRM, RGK = 1 kΩTj = 125 °C Min. 75 V/µs
VTM ITM = 1.6 A, tp = 380 µs Tj = 25 ° C Ma x. 1. 9 5 V
Vt0 Threshold volt age Tj = 125 °C Max. 0.95 V
RdDynamic resist ance Tj = 125 °C Max. 600 mΩ
IDRM
IRRM
VDRM = VRRM = 400 V RGK = 1 kΩTj = 25 °C Max.
1
µAVDRM = VRRM = 600 V RGK = 1 kΩ10
VDRM = VRRM RGK = 1 kΩTj = 125 °C 100
1. Tj = 25 °C, u nless otherwise specified
Table 5 . Electrical chara cteri stics (1) P 010xxL
Symbol Test conditi ons P0102xL P0109AL Unit
IGT VD = 12 V, RL = 140 ΩMax. 200 1 µA
VGT Max. 0.8 V
VGD VD = VDRM, RL = 3.3 kΩ, RGK = 1 kΩTj = 125 °C Min. 0.1 V
VRG IRG = 10 µA Min. 8 V
IHIT = 50 mA, RGK = 1 kΩMax. 6 mA
ILIG = 1 mA, RGK = 1 kΩMax. 7 mA
dV/dt VD = 67% VDRM, RGK = 1 kΩTj = 125 °C Min. 200 100 V/µs
VTM ITM = 0.4 A, tp = 380 µs Tj = 25 °C Max. 1.7 V
Vt0 Threshold voltage Tj = 125 °C Max. 1.0 V
RdDynamic resistance Tj = 125 °C Max. 1000 mΩ
IDRM
IRRM VDRM = VRRM Tj = 25 °C Max. 1µA
Tj = 125 °C 100
1. Tj = 25 °C, u nless otherwise specified
Characteristics P010xx
4/12 DocID15197 Rev 2
Tab le 6. Electrical de vice sum mary
Order code Voltage Sensitivity Package Packing mode
100 V 200 V 400 V 600 V
P0102AA 1AA3 X 200 µA T O -92 Bulk
P0102AA 5AL3 X 200 µA TO-92 Tape and reel 13 i nch
P0102AL 5AA4 X 200 µA SOT23-3L Tape an d reel 7 inc h
P0102BA 1AA3 X 200 µA TO -92 Bulk
P0102BL 5AA4 X 200 µA SOT23-3L Tape and reel 7 inch
P0102DA 1AA3 X 200 µA TO -92 Bulk
P0102DA 2AL3 X 200 µA T O-92 Ammopack
P0102DA 5AL3 X 200 µA T O -92 Tape and reel 13 inch
P 0102DN 5AA4 X X 200 µA SOT-223 Tape and reel 7 inch
P0102MA 1AA3 X 200 µA TO-9 2 Bulk
P0102MN 5AA4 X 200 µA SOT-223 Tape and reel 7 inch
P0109AL 5AA4 X 1 µA SOT23-3L Tape and reel 7 inch
P0109DA 1AA3 X 1 µA T O-92 Bulk
P0109DA 5AL3 X 1 µA TO-92 Tape and reel 13 inch
Table 7. Thermal resistance
Symbol Parameter Maximum Unit
Rth(j-a) Junc tion to cas e (D C) TO- 9 2 80 °C /W
Rth(j-t) Junction to t ab (DC) SOT-223 30 °C/W
Rth(j-a) Junctio n to ambient (DC) TO-92 150 °C/W
S(1) = 5 cm2SOT-223 60
Rth(j-a) Junct ion to ambient (mounted on FR4 with recom me nded pad
layout) SOT23-3L 400 °C/W
1. S = Copper surface under tab.
DocID15197 Rev 2 5/12
P010xx Characteristics
12
Figure 1. Maxim um averag e pow er dissi pation
versus average on-state current P010xxA and
P010xxN
Figure 2. Maximum average power dissipation
versus aver age on -state c urre nt P01 0xxL
0.0 0.1 0.2 0.3 0.4 0.5 0.6
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
P(W)
α= 180°
360°
α
I(A)
T(AV)
0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18
0.00
0.02
0.04
0.06
0.08
0.10
0.12
0.14
0.16
0.18
0.20
0.22
0.24
0.26
0.28
0.30
P(W)
I(A)
T(AV)
α= 180°
360°
α
Figure 3. Averag e and DC on-s tate current
versus lead temperature
P010xxA and P010xxN
Figur e 4. Average an d DC on-state current
versus am bient tempera ture P 010xxA an d
P010xxN
0 25 50 75 100 125
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
I(A)
T(AV)
T (°C)
lead
α= 180° (SOT-223)
α= 180° (TO-92)
D.C. (SOT-223)
D.C. (TO-92)
0 25 50 75 100 125
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
I(A)
T(AV)
T (°C)
amb
α= 180° (SOT-223)
α= 180° (TO-92)
D.C. (SOT-223)
D.C. (TO-92)
Device mounted on
FR4 with recomended
pad layout for SOT-223
Characteristics P010xx
6/12 DocID15197 Rev 2
Figure 5. Averag e and DC on-s tate current
versus case tem pera ture P010xxL F igure 6. R elative variatio n of thermal
impedance junction to ambient
versus pulse duration
0 25 50 75 100 125
0.00
0.05
0.10
0.15
0.20
0.25
0.30
I(A)
T(AV)
T (°C)
case
α= 180°
D.C.
1E-2 1E-1 1E+0 1E+1 1E+2 5E+2
0.01
0.10
1.00
K=[Z /R
th(j-a) th(j-a)]
t (s)
p
SOT-223
TO-92
SOT23-3L
Figu re 7. Gate tr i gg er, ho ld in g, and latchi ng
currents with gate trigger voltage versus
junction temperature
Fig ur e 8. Relat ive vari ation of hold ing curre nt
versus ga te-c athode resi stance
0.0
1.0
2.0
3.0
4.0
5.0
6.0
-40 -20 0 20 40 60 80 100 120 140
I
GT
,V
GT
,I
H
,I
L
[T
j
]/I
GT
,V
GT
,i
H
,i
L
[T
j
=25 °C]
I
H
and I
L
(R
GK
=1 KΩ)
V
GT
IGT
T (°C)
j
Relative variations
Typical values
1E-2 1E-1 1E+0 1E+1
0
2
4
6
8
10
12
14
16
18
20
R(k)
GK Ω
I [R ] / I [ =1k ]
HGK H ΩRGK
Tj= 25°C
Typical values
Fig ure 9. Rela ti v e va ri at io n of dV /dt im m un ity
versus gate-cathode resistance Figure 10. Relative variation of dV/dt immun ity
versus gate-cathode capacitance
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
0.1
1.0
10.0
R(k)
GK Ω
dV/dt[R ] / dV/dt[ =1k ]
GK ΩRGK
Tj= 125°C
V = 0.67 x V
D DRM
Typical values
01234567
0
2
4
6
8
10
C (nF)
GK
dV/dt[C ] / dV/dt[ =1k ]
GK ΩRGK
T
V = 0.67 x V
= 125°C
R = 1k
D DRM
GK
j
Ω
Typical values
DocID15197 Rev 2 7/12
P010xx Characteristics
12
Figure 11. Surge pea k on-state current versus
number of cycles Figure 12. Non-repetitive sur ge peak
on-state cu rren t and corr espo nd ing value of I²t
I(A)
TSM
1 10 100 1000
0
1
2
3
4
5
6
7
8
Number of cycles
Non repetitive
T initial=25°C
j
Repetitive
T =25°C
amb
t =10ms
p
One cycle
I (A), I t (A s)
TSM 22
100.0
10.0
1.0
0.1
0.01 0.10 1.00 10.00
T initial = 25°C
j
I t
2
ITSM
t(ms)
p
For a sinusoidal pulse
with width tp < 10 ms
Figure 13. On-state characteristics P010xxA,
P010xxN Figure 14. On -state ch arac teris tics P010xxL
I(A)
TM
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
1E+1
1E+0
1E-1
1E-2
V =0.95V
R =600m
T max.:
j
t0
dΩ
V(V)
TM
Tj=max
T =25°C
j
Maximum values
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
1E-2
1E-1
1E+0
1E+1
I(A)
TM
V(V)
TM
Tj=max
T =25°C
j
V =1.0V
R=1
T max.:
j
t0
dΩ
Maximum values
Figure 15. Thermal resistance junction to
ambient versus copper surface under tab
P010xxN
Figure 16. Therm al resistance junction to
ambient versus copper surface under tab
P010xxL
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
130
120
110
100
90
80
70
60
50
40
30
20
10
0
S(cm²)
R (°C/W)
th(j-a)
Epoxy printed circuit board
FR4, copper thickness = 35 µm
0 102030405060708090100
0
100
200
300
400
500
S(cm²)
R (°C/W)
th(j-a)
Epoxy printed circuit board
FR4, copper thickness = 35 µm
Pack age information P010xx
8/12 DocID15197 Rev 2
2 Package information
•Epoxy meets UL94, V0
•Lead-free package
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depe nding on their level of environmen tal compliance. ECO PA CK ®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 8. TO-92 dimensions
Ref
dimensions
Millimeters Inches
Min Typ Max Min Typ Max
A 1.35 0.053
B4.700.185
C 2.54 0.100
D 4.40 0.173
E 12.70 0.500
F3.700.146
a0.500.019
Table 9. SOT-22 3 dimensi on s
Ref.
Dimensions
Millimeters Inches
Min. Typ. Max. Min. Typ. Max.
A 1.80 0.071
A1 0.02 0.10 0.001 0.004
B 0.60 0.70 0.85 0.024 0.027 0.033
B1 2.90 3.00 3.15 0.114 0.118 0.124
c 0.24 0.26 0.35 0.009 0.010 0.014
D(1)
1. Do not i nclu de mold flash or p rotrusions. Mold flas h or protrusions shall not exceed 0.1 5mm (0.006 inches)
6.30 6.50 6.70 0.248 0.256 0.264
e2.3 0.090
e1 4.6 0.181
E(1) 3.30 3.50 3.70 0.130 0.138 0.146
H 6.70 7.00 7.30 0.264 0.276 0.287
V 10° max
A
F
C
B
a
DE
A
A1
e1
D
B1
HE
e
12
4
3
B
Vc
DocID15197 Rev 2 9/12
P010xx Packag e inform ati on
12
Figure 17. Foo tprint (dimension s in mm)
Figure 18. Foo tprint (dimension s in mm)
Tabl e 10 . SO T23- 3L di m e nsio ns
Ref.
Dimensions
Millimeters Inches
Min. Max. Min. Max.
A 0.89 1.4 0.035 0.055
A1 0 0.1 0 0.004
B 0.3 0.51 0.012 0.02
c 0.085 0.18 0.003 0.007
D 2.75 3.04 0.108 0.12
e 0.85 1.05 0.033 0.041
e1 1.7 2.1 0.067 0.083
E 1.2 1.6 0.047 0.063
H 2.1 2.75 0.083 0.108
L 0.6 typ. 0.024 typ.
S 0.35 0.65 0.014 0.026
3.25
1.32
7.80
5.16
1.32
2.30 0.95
A1
A
L
H
B
E
D
e
e1
S
c
0.95 0.61
1.26
3.25
0.73
Ordering information P010xx
10/12 Doc ID15197 Rev 2
3 Ordering information
Figure 19. Ordering information scheme
Tab le 11. Or deri ng info rm at i on
Order code Mar king Package Weight Bas e qty Packing mode
P0102AA 1AA3 P0102 AA TO-92 0.2 g 2500 Bulk
P0102AA 5AL3 P0102 AA TO-92 0.2 g 2000 Tape and reel 13 inch
P0102AL 5AA4 P2A SOT23-3L 0.01 g 3000 Tape and reel 7 inch
P0102BA 1AA3 P0102 BA TO-92 0.2 g 1000 Bulk
P0102BL 5AA4 P2B SOT23-3L 0.01 g 3000 Tape and reel 7 inch
P0102DA 1AA3 P0102 DA TO-92 0. 2 g 2500 Bulk
P0102DA 2AL3 P0102 DA TO-92 0.2 g 2000 Ammopack
P0102DA 5AL3 P0102 DA TO-92 0.2 g 2000 Tape and reel 13 inch
P0102DN 5AA4 P2D SOT-223 0.11 g 3000 Tape and reel 7 inch
P0102MA 1AA3 P0102 MA TO-92 0.2 g 2500 Bulk
P 0102MN 5AA4 P2M SOT-223 0.11 g 2000 Tape and reel 7 inch
P0109AL 5AA4 P9A SOT23-3L 0.01 g 3000 Tape and reel 7 inch
P0109DA 1AA3 P0109 DA TO-92 0. 2 g 2500 Bulk
P0109DA 5AL3 P0109 DA TO-92 0.2 g 2000 Tape and reel 13 inch
Sensitive SCR series
Sensitivity
Voltage
Package
Packing mode
Current
01 up to 0.8 A
02 = 200 µA
09 = 1 µA
A = 100 V
B = 200 V
D = 400 V
M = 600 V
A = TO-92
L = SOT23-3L
N = SOT-223
1AA3 = Bulk
2AL3 = Ammopack
5AL3 = Tape and reel 13 inch
5AA4 = Tape and reel 7 inch
BlankP 01 0x x x xAxx
P010xx
12/12 Doc ID15197 Rev 2
Pl ease Read Carefull y:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time , with out noti ce.
All ST products are sol d purs uant to ST’s te rm s and con di t io ns of sale.
Purc hasers are s ol ely res ponsible for the choice , se l ectio n and us e of the S T produc ts and se rvice s des cribed he rei n, and S T assumes no
liability whatsoever relating to the choice, selection or use of the ST products an d services described herein .
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
docum ent refe rs to any th i rd par ty products or services i t s hall not be deem ed a license grant by ST for t he use of such third party products
or ser vic es, or an y inte llec tual proper ty co ntai ned t herei n or con sid ered as a war rant y cove rin g the us e in any mann er what soev er of such
third part y products or serv i ces or any i ntell ectual property contai ned t herein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AE RO NAUTIC A P PL I C AT I O NS; ( C) AUT OMO T IV E APPL ICAT IONS O R E N V IRON ME NT S, AN D/ O R (D ) A E RO S PACE A P PL I C AT ION S
OR ENVIR ONMENT S. WHERE ST PRO DUCTS ARE NO T DESIG NED FOR SU CH USE, THE PU RCHASER SHALL USE PROD UCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOM AIN S A CCOR DIN G TO ST P ROD UCT DES IGN S PECI FI CAT IONS. PR ODUC TS F ORMA LL Y ESC C, QML OR J AN Q UALI FIE D AR E
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORR ESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any w arr anty grant ed by ST for t he ST pro duct or se rv ice des cri bed he rein and shal l no t cre ate o r ext end in a ny m anner w ha tsoe ver, any
liability of ST.
ST and the ST lo go are tradem arks or registered tr ademarks of ST in va ri ous countr i es.
Info rm ation in th i s document super sedes and replace s all i nfor m ation previ ously suppl i ed.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 ST M i croelectronics - Al l rights reserved
STM i cro el ectronics grou p of companies
Australi a - Belgi um - Bra zi l - Cana da - China - Czech Republ i c - Finl and - F ranc e - Germany - Hong Kong - India - Israel - It aly - Japan -
Malaysia - Malta - Moro cco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United Sta tes of America
www.st.com
