Agilent 6670A Series Single-Output, 2000 W DC Power Supplies, GBIP Data Sheet Speed and accuracy for test optimization * * * * * Fast, low-noise outputs Analog control of output voltage and current Fan-speed control to minimize acoustic noise Built-in measurements and advanced programmable features Protection features to ensure DUT safety This series of 2000 watt DC power supplies has the exceptional, proven reliability that test system engineers look for. It also has the unusual combination of high efficiency and low noise operation. The output voltage and current can also be controlled with analog signals. This is helpful for certain types of noisy environments, and also immediate reactions to process changes. Programming of the DC output and the extensive protection features can be done either from the front panel or using industry standard SCPI commands, via the GPIB. Using the serial link, up to 16 power supplies can be connected through one GPIB address. Test system integration can be further simplified be using the VXIplug&play drivers. Lab-bench use is enhanced by the fan-speed control, which minimizes acoustic noise. The extremely low ripple and noise helps the built-in measurement system make extremely accurate current and voltage measurements. Specifications Specifications (at 0 to 55 C unless otherwise specified) 6671A 6672A 6673A 6674A 6675A Number of outputs 1 1 1 1 1 GPIB Yes Yes Yes Yes Yes Output voltage 0 to 8 V 0 to 20 V 0 to 35 V 0 to 60 V 0 to 120 V Output current 0 to 220 A 0 to 100 A 0 to 60 A 0 to 35 A 0 to 18 A 8 mV 20 mV 35 mV 60 mV 120 mV 125 mA 60 mA 40 mA 25 mA 12 mA Output ratings Programming accuracy (at 25 C 5 C) Voltage 0.04% + Current 0.1% + Ripple and noise from 20 Hz to 20 MHz Voltage rms peak-to-peak Current rms 650 V 750 V 800 V 1.25 mV 1.9 mV 7 mV 9 mV 9 mV 11 mV 16 mV 200 mA 100 mA 40 mA 25 mA 12 mA Readback accuracy at 25 C 5 C (percent of reading plus fixed) Voltage 0.05% + 12 mV 30 mV 50 mV 90 mV 180 mV Current 0.1% + 150 mA 100 mA 60 mA 35 mA 18 mA Voltage 0.002% + 300 V 650 V 1.2 mV 2 mV 4 mV Current 0.005% + 10 mA 7 mA 4 mA 2 mA 1 mA Load and line regulation Transient response time Supplemental characteristics (Non-warranted characteristics determined by design and useful in applying the product) Less than 900 s for the output voltage to recover to within 100 mV following a change in load from 100% to 50% or 50% to 100% of the output current rating of the supply 6671A 6672A 6673A 6674A 6675A Average programming resolution Voltage 2 mV 5 mV 10 mV 15 mV 30 mV Current 55 mA 25 mA 15 mA 8.75 mA 4.5 mA OVP 15 mV 35 mV 65 mV 100 mV 215 mV 30 ms 60 ms 130 ms 130 ms 195 ms Output voltage programming response time* (excluding command processing time) * Full load programming rise/fall time (10% to 90% or 90% to 10%) with full resistive load equal to rated output voltage/rated output current. 2 Specifications, continued Specifications (at 0 to 55 C unless otherwise specified) 6671A-J03 6671A-J04 6671A-J08 6671A-J17 6672A-J04 6673A-J03 Special order option Special order option Special order option Special order option Special order option Special order option Number of outputs 1 1 1 1 1 1 GPIB Yes Yes Yes Yes Yes Yes Output ratings Output voltage 14 V 10 V 3V 15 V 24 V 37.5 V Output current 150 A 200 A 300 A 120 A 85 A 45 A Programming accuracy (at 25 C 5 C) Voltage 0.04% + 14 mV 10 mV 4 mV 15 mV 25 mV 37.5 mV Current 0.1% + 90 mA 125 mA 250 mA 90 mA 60 mA 40 mA 1.5 mV 750 V 1 mV 1.5 mV 1 mV 800 V Ripple and noise from 20 Hz to 20 MHz Voltage rms peak-to-peak Current rms 15 mV 9 mV 25 mV 15 mV 11 mV 9 mV 150 mA 200 mA 275 mA 150 mA 100 mA 40 mA Readback accuracy at 25 C 5 C (percent of reading plus fixed) Voltage 0.05% + 25 mV 15 mV 6 mV 27 mV 40 mV 53.5 mV Current 0.1% + 110 mA 150 mA 250 mA 110 mA 100 mA 60 mA Voltage 0.002% + 600 V 300 V 300 V 650 V 650 V 1.2 mV Current 0.005% + 7 mA 10 mA 15 mA 7 mA 7 mA 4 mA Load and line regulation Transient response time Supplemental characteristics (Non-warranted characteristics determined by design and useful in applying the product) Less than 900 s for the output voltage to recover to within 100 mV following a change in load from 100% to 50% or 50% to 100% of the output current rating of the supply 6671A-J03 6671A-J04 6671A-J08 6671A-J17 6672A-J04 6673A-J03 Special order option Special order option Special order option Special order option Special order option Special order option Average programming resolution Voltage 4 mV 2.5 mV 1 mV 4 mV 6 mV 10 mV Current 40 mA 55 mA 75 mA 35 mA 22 mA 15 mA OVP 28 mV 20 mV 8 mV 30 mV 42 mV 65 mV 30 ms 35 ms 30 ms 35 ms 70 ms 130 ms Output voltage programming response time* (excluding command processing time) * Full load programming rise/fall time (10% to 90% or 90% to 10%) with full resistive load equal to rated output voltage/rated output current. 3 Specifications, continued Specifications (at 0 to 55 C unless otherwise specified) 6673A-J08 6674A-J03 6674A-J07 6675A-J04 6675A-J06 Special order option Special order option Special order option Special order option Special order option Number of outputs 1 1 1 1 1 GPIB Yes Yes Yes Yes Yes Output voltage 40 V 56 V 50 V 160 V 135 V Output current 50 A 38 A 42 A 13 A 16 A Output ratings Programming accuracy (at 25 C 5 C) Voltage 0.04% + 40 mV 60 mV 60 mV 160 mV 125 mV Current 0.1% + 35 mA 28 mA 30 mA 10 mA 12 mA 1 mV 1.25 mV 1.25 mV 2.8 mV 2 mV 10.5 mV 11 mV 11 mV 20 mV 18 mV rms 40 mA 28 mA 25 mA 18 mA 12 mA Voltage 0.05% + 60 mV 90 mV 90 mV 240 mV 185 mV Current 0.1% + 60 mA 38 mA 42 mA 14 mA 18 mA Voltage 0.002% + 1.4 mV 2 mV 2 mV 6 mV 4 mV Current 0.005% + 4 mA 2 mA 2 mA 1 mA 4 mA Ripple and noise from 20 Hz to 20 MHz Voltage rms peak-to-peak Current Readback accuracy at 25 C 5 C (percent of reading plus fixed) Load and line regulation Transient response time Supplemental characteristics (Non-warranted characteristics determined by design and useful in applying the product) Less than 900 s for the output voltage to recover to within 100 mV following a change in load from 100% to 50% or 50% to 100% of the output current rating of the supply 6673A-J08 6674A-J03 6674A-J07 6675A-J04 6675A-J06 Special order option Special order option Special order option Special order option Special order option Average programming resolution Voltage 10.5 mV 14 mV 12 mV 40 mV 34 mV Current 12.5 mA 9.5 mA 11 mA 3.25 mA 4 mA OVP 75 mV 100 mV 85 mV 300 mV 242 mV 130 ms 130 ms 130 ms 280 ms 250 ms Output voltage programming response time* (excluding command processing time) * Full load programming rise/fall time (10% to 90% or 90% to 10%) with full resistive load equal to rated output voltage/rated output current. 4 Specifications, continued Specifications (at 0 to 55 C unless otherwise specified) 6675A-J07 6675A-J08 6675A-J09 6675A-J11 Special order option Special order option Special order option Special order option Number of outputs 1 1 1 1 GPIB Yes Yes Yes Yes Output voltage 200 V 100 V 110 V 150 V Output current 11 A 22 A 20 A 15 A 200 mV 120 mV 120 mV 150 mV 8 mA 15 mA 13.5 mA 11 mA Output ratings Programming accuracy (at 25 C 5 C) Voltage 0.04% + Current 0.1% + Ripple and noise from 20 Hz to 20 MHz Voltage rms 3.5 mV 1.9 mV 1.9 mV 2.5 mV peak-to-peak 25 mV 16 mV 16 mV 18 mV rms 15 mA 15 mA 13.5 mA 12 mA Current Readback accuracy at 25 C 5 C (percent of reading plus fixed) Voltage 0.05% + 300 mV 180 mV 180 mV 225 mV Current 0.1% + 12 mA 22 mA 20 mA 15 mA Load and line regulation Voltage 0.002% + 7 mV 4 mV 4 mV 6 mV Current 0.005% + 1 mA 4 mA 4 mA 1 mA Transient response time Supplemental characteristics (Non-warranted characteristics determined by design and useful in applying the product) Less than 900 s for the output voltage to recover to within 100 mV following a change in load from 100% to 50% or 50% to 100% of the output current rating of the supply 6675A-J07 6675A-J08 6675A-J09 6675A-J11 Special order option Special order option Special order option Special order option Average programming resolution Voltage 50 mV 30 mV 30 mV 37.5 mV Current 2.75 mA 4.5 mA 4.5 mA 3.75 mA OVP 360 mV 215 mV 215 mV 270 mV 350 ms 195 ms 195 ms 250 ms Output voltage programming response time* (excluding command processing time) * Full load programming rise/fall time (10% to 90% or 90% to 10%) with full resistive load equal to rated output voltage/rated output current. 5 Supplemental characteristics for all model numbers Command processing time: Average time required for the output voltage to begin to change following receipt of digital data is 20 ms for the power supplies connected directly to the GPIB DC floating voltage: Output terminals can be floated up to 240 VDC from chassis ground Output common-mode noise current: (to signal ground binding post) 500 A rms, 4 mA peak-to-peak Remote sensing: Up to half the rated output voltage can be dropped in each load lead. The drop in the load leads subtracts from the voltage available for the load. Modulation: (Analog programming of output voltage and current) Input signal: 0 to -4 V for voltage, 0 to 7 V for current Input impedance: 60 k or greater Software driver: * IVI-COM * VXIplug&play Regulatory compliance: Listed to UL1244; certified to CSA556B; conforms to IEC 61010-1 Size: 425.5 mm W x 132.6 mm H x 640 mm D (16.75 in x 5.22 in x 25.2 in) Input power: 3,800 VA, 2,600 W at full load; 170 W at no load Weight: Net, 28.2 kg (62 lb); shipping, 31.8 kg (70 lb) GPIB interface capabilities: SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, E1, and C0. IEEE-488.2 and SCPIcompatible command set Warranty: One year Agilent models: 6671A, 6672A, 6673A, 6674A, 6675A Top 574 mm 22.6" Rear Connector Detail Accepts Wire AWG 12-22 1/4" x 1" untreaded hole on each bussbar Buss Bar Detail 1.25" 0.31 dia" IM VP +IP -LS -IP +P +S -S 425.5 mm 16.75" 1.0" +LS 0.5" 0.75" 640 mm 25.4" Note: Buss Bar is 1/8" thick cu 68 mm 2.67" 128 mm 5.04" Rear 6 12.7 mm 0.5" 132.6 mm 5.2" Side 145.1 mm 5.71" www.agilent.com www.agilent.com/find/6670 Ordering information The 6670 Series power supplies come with full documentation on CD-ROM. The CD-ROM includes user's guide, programming guide, service manual, quick start guide, and application notes. For more information on Agilent Technologies' products, applications or services, please contact your local Agilent office. The complete list is available at: www.agilent.com/find/contactus Opt 0L1 Printed user's and programming guides Opt 0B3 Printed service manual Opt S50 Non-latching remote inhibit Agilent Advantage Services is committed to your success throughout your equipment's lifetime. To keep you competitive, we continually invest in tools and processes that speed up calibration and repair and reduce your cost of ownership. You can also use Infoline Web Services to manage equipment and services more effectively. By sharing our measurement and service expertise, we help you create the products that change our world. Accessories www.agilent.com/find/advantageservices Opt 200 174 to 220 VAC, 47 to 63 Hz (Japan only) Opt 230 191 to 250 VAC, 47 to 63 Hz 1CM003A* Rack mount flange kit 132.6 mm H (3U) - two flange brackets 1CP002A* Rack mount flange and handle kit 132.6 mm H (3U) - two brackets and front handles E3663AC Support rails for Agilent rack cabinets p/n 1494-0059 Accessory slide kit p/n 1252-3698 7-pin analog plug p/n 1252-1488 4-pin digital plug p/n 5080-2148 Serial link cable 2 m (6.6 ft) Application notes 6671A/72A/81A/82A/90A System DC Power Supplies Product Overview, 5988-3050EN Agilent DC Power Supplies for Base Station Testing, 5988-2386EN Agilent Electronic Measurement Group DEKRA Certified ISO 9001:2008 Quality Management Sys System www.agilent.com/quality Agilent Email Updates www.agilent.com/find/emailupdates Get the latest information on the products and applications you select. Agilent Channel Partners www.agilent.com/find/channelpartners Get the best of both worlds: Agilent's measurement expertise and product breadth, combined with channel partner convenience. Americas Canada Brazil Mexico United States (877) 894 4414 (11) 4197 3600 01800 5064 800 (800) 829 4444 Asia Pacific Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 112 929 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 375 8100 Europe & Middle East Belgium 32 (0) 2 404 93 40 Denmark 45 45 80 12 15 Finland 358 (0) 10 855 2100 France 0825 010 700* *0.125 /minute Germany Ireland Israel Italy Netherlands Spain Sweden United Kingdom 49 (0) 7031 464 6333 1890 924 204 972-3-9288-504/544 39 02 92 60 8484 31 (0) 20 547 2111 34 (91) 631 3300 0200-88 22 55 44 (0) 118 927 6201 For other unlisted countries: www.agilent.com/find/contactus Revised: January 6, 2012 10 Practical Tips You Need to Know About Your Power Products, 5965-8239E * Support rails required Product specifications and descriptions in this document subject to change without notice. (c) Agilent Technologies, Inc. 2012 Published in USA, March 14, 2012 5990-9306EN