POWER LCC600 600 Watts Conduction Cooling Data Sheet Total Power: 600 W # of Outputs: Single Outputs: 12, 28, 36, 48 Vdc SPECIAL FEATURES 600 W full power at elevated temperatures Wide operating temperature range (-40 C to 85 C baseplate) Adjustable output Remote output On/Off AC_OK; DC_OK signals 5 V standby voltage Active current share Conduction-cooled/fanless I2C / PMBus Medical and ITE Safety3 Suited for BF-type applications Active power factor correction Optional IP65 variant Optional 277 Vac input variant Electrical Specifications Input Input range U Suffix: H Suffix: 90 - 264 Vac (Safety rating:100 - 240 Vac) 127 - 374 Vdc4 180 - 305 Vac (Safety rating: 200 - 277 Vac) 254 - 420 Vdc4 Frequency 47 - 63 / 440 Hz (Safety rating: 50/60 Hz) Input fusing Internal fuse on both L and N lines (12.5 A - U suffix; 7 A - H suffix) EMI/RFI FCC Class B, CISPR22/EN55022 Class B COMPLIANCE MIL-STD-461F EMI1 Compliance to CE101, 102; CS101, 114, 115, 116 (with external filter1) EMI Class B EN61000 Immunity Inrush current 25 A peak Power factor 0.99 typical Harmonics Meets EN61000-3-2 Class A and Class C2 SAFETY Input current < 10 Arms @ 100 Vac UL + CSA: 60950-1 2nd Ed. ANSI ES60601-13 UL 87505 CSA-C22.2 No. 250.135 TUV: 60950-1 2nd Ed. 60601-1 3rd Ed.3 EN 61347-1; -2-135 CB Scheme: IEC 60950-1 IEC 60601-1 IEC 61347-1; -2-135 ChinaCCC CE Mark Hold up time 20 ms min for Main Output (230 Vac) @ 100% Load Efficiency 93.3% typical @ 230 Vac; 100% Load; 28 Vdc Leakage current3 U Suffix: H Suffix: Isolation voltage U Suffix PRI-SEC: 4,000 Vac (2X MOPP) PRI-Chassis: 1,500 Vac (1X MOPP) SEC-Chassis: 1,500 Vac (1X MOPP) 115 A typical (< 200 A max per ANSI/ES60601-1 264 Vac split-phase / 60 Hz) 387 A typical (< 500 A max per IEC60601-1; 264 Vac / 50Hz) 0.2 mA typical (< 3.5 mA max per ITE 60950-1 Standard) Artesyn Filter PN: 700-014447-0000 (Zhongguang PN: ZGLPG-10-02M). Meets Class C 50% load. U suffix have both ITE and Medical Safeties. H suffix carries ITE approval only. 4 DC input rating not part of product's Safety approval. 5 LED Lighting approvals apply to all 48 V output variants. 1 2 3 H Suffix 3,000 Vac 2,000 Vac 1,500 Vac LCC600 Data Sheet Electrical Specifications Output Output rating See Ordering Information table Standby output 5.0 Vdc @ 1.5 A Max Set point 0.5% Factory set point Total regulation Main Output: 2.0% 5 Vsb: 5% Combined Line / Load / Temperature Rated load 600 W maximum 600 W from -40 C to 85 C Baseplate Temp. Derate output to 28 W @ 95 C Baseplate Temp Minimum load 0A For both Main and 5 Vsb Outputs Output voltage adjust range See Ordering Information table Max power limited to 600 W Output noise Main Output: 1.0% max p-p 5 Vsb: 60 mV max p-p Measured with 0.1 F Ceramic and 10 F Tantalum Cap, 20 MHz BW Remote sense Compensation up to 500 mV Pin 10: +Vout_RS / Pin4: -Vout_RS Overcurrent protection 105 - 130% of full load current Default is Shutdown mode with Auto-retry every 2~4 sec. Output latches after 20 sec of continuous OCP fault presence. Restart after latch possible through AC recycle, Inhibit toggle or through PMBus. Overvoltage protection 125 - 145% Vo, nom Main Output 125 - 130% 5 Vsb Latching / AC Recyle or Inhibit toggle required for PSU restart Overtemperature protection > 95 C Baseplate temperature Output Shutdown / Auto-recovery AC_OK Open Collector; 0.8 Vdc max / 10 mA Active low when AC is present DC_OK Open Collector; 0.8 Vdc max / 10 mA Active low when Main Output is within regulation Remote inhibit Contact Closure Pin 19: Open/Float = ON; Close/Ground = OFF # Units in parallel operation Qualified up to 5 units in parallel. Consult factory if more than 5 are required. Pin 5: IShare pin for main output only. Output dimming 0-10 Vdc external voltage; 0-100 kOhm external resistance Consult with productsupport.ep@artesyn.com Environmental Specifications Operating temperature range -40 C to +85 C Baseplate temperature Storage temperature -40 C to +85 C Humidity 10% to 95% Altitude 16,402 ft (Operating) / 50,000 ft (Non-Operating) Shock MIL-STD-810F 516.5 Procedure I, VI Vibration MIL-STD-810F 514.5 Cat. 4, 10 Ingress protection IP65 (for suffix "-4P") MTBF (calculated) >2M Hrs, 25 C per SR-332 Issue 3 Electromagnetic immunity Designed to meet EN61000-4-3, -4, -5, -8, -11 (Level 3); EN61000-4-2 (Level 4); EN60601-1-2 and EN55024 For H suffix, Level 4 for EN61000-4-5 LCC600 Data Sheet Ordering Information Model Number* LCC600-48U-4PD(1) AC Input Output Setpoint Setpoint Tolerance 90 - 264 54 V LCC600-48U-9P 90 - 264 LCC600-48H-9P 180 - 305 LCC600-36U-9P 90 - 264 LCC600-36H-9P 180 - 305 LCC600-28U-9P24 90 - 264 LCC600-28U-9P 90 - 264 LCC600-28H-9P 180 - 305 LCC600-12U-9P 90 - 264 LCC600-12H-9P 180 - 305 Output Current [A] Max O/P Typical Efficiency** Standby Output Combined Line/Load Regulation Output Ripple Min Max Power [W] 0.5% 0 11.1 600 93.0% 5 Vdc @ 1.5 A 2% 1% 48 V 0.5% 0 12.5 600 93.0% 5 Vdc @ 1.5 A 2% 1% 36 V 0.5% 0 16.7 600 92.0% 5 Vdc @ 1.5 A 2% 1% 24 V 0.5% 0 25 600 93.0% 5 Vdc @ 1.5 A 2% 1% 28 V 0.5% 0 25*** 600 93.5% 5 Vdc @ 1.5 A 2% 1% 12 V 0.5% 0 50 600 92.3% 5 Vdc @ 1.5 A 2% 1% *Change suffix "-9P" to "-4P" for IP65 rated enclosure with fly lead wires *Change suffix "-4P" to "-4PR" for IP65 rated enclosure with right angle fly lead wires (applies to 28, 36, 48 Vdc) *Change suffix "-4P" to "-4PV" to omit the control cable (applies to 28, 36, 48 Vdc) * Add suffix "CC" for Constant Current setting (e.g. "-4PCC"; "-9PCC"). **Typical efficiency at high line, factory default voltage and full load ***When Vout is adjusted down to 24 V, the supply can deliver 25 A max (600 W max). At 28 V default output setting, max Iout is 21.43 A (600 W max). (1) "D" suffix for 0-10 Vdc analog external volatge dimming (11.1 A CC limit). Consult Technical Reference Notes for additional details. Mechanical Drawings 228 0.50 -9P Suffix 4-POSITION TERMINAL BLOCK M4x8 SCREW, 10mm PITCH WITH PLASTIC COVER (SEE NOTE 7) 3-POSITION LOCKING CONNECTOR (TYCO P/N: 1-350943-0 OR EQUIVALENT) MATE WITH TYCO P/N: 350766-1 (HOUSING) & 350536-1 (CONTACT TERMINAL) SIGNAL PIN LOCATIONS PIN 2 PIN 1 PIN 20 PIN 19 TRIMPOT WINDOW MODEL LABEL HEADER CONNECTOR (J1501) MATE WITH P/N: JST PN PHDR-20VS (HOUSING) & JST PN SPHD-001T-P0.5 (CONTAC PINS) (SEE PIN LOCATION DETAILS) 228 0.50 85.0 0.50 (29.7) 39.8 -0.3 +0.7 (2.2) 0.20 101 0.50 73.34 73.34 40.66 93.00 (35.50) CUSTOMER MOUNTING HOLE FIT WITH M4 SCREW (6 PL) Notes: 1) Recommended mounting screw is M4 in 6 locations; 8-10 kgf-cm torque. 2) Baseplate material/finish: 5 mm Aluminum with Black Anodized. 3) Weight: 9P Suffix: 1.63 kg typical 4P Suffix: 1.81 kg typical 4) Thermal hotspot reference is in the middle of the baseplate. LCC600 Data Sheet Mechanical Drawings -4P Suffix (28, 36, 48 Vdc) 228 0.5 300 10 300 10 UL2517 14AWGX4C SJTW 18AWGX3C (30) (30) UL2517 26AWGX20C+AL MODEL LABEL 290 10 (50.5) 8.5 (21.4) 228 0.5 0.2 84.41 0.5 39.8-0.3 +0.7 TRIMPOT LOCATION 85 0.5 CUSTOMER MOUNTING HOLE 4.6 FIT WITH M4 SCREW (6 PL) 101 0.5 (3-93.0) CUT EXPOSED LEADS OF SIGNAL WIRES (2-73.3) (2-146.7) (2-40.7) -4P Suffix (12 Vdc) 300 10 TIN DIP 228 0.5 3X- 307 59 0.5 HEIGHT MEASUREMENT REFERENCE POINT SEE NOTE 9 10 UL2517 26AWGX20C TIN DIP TRIMPOT LOCATION ARTESYN P/N: 750-007030-00XX (OUTPUT CABLE ASSY) THW OR MTW AWG 6 WIRE 0.2 CUSTOMER MOUNTING HOLE 4.6 FIT WITH M4 SCREW (SEE NOTE 8) (6 PL) (2X-73.3) (2X-146.7) (2X-40.7) (3X-93) (50.5) (5) (22) (24) 85 0.50 101 0.50 40.50max RATING AND SAFETY LOGO LABEL 46 0.5 ARTESYN P/N: 750-006769-000X (INPUT CABLE ASSY) LCC600 Data Sheet Mechanical Drawings -4PR Suffix (28, 36, 48 Vdc) 265.0 2.0 40.5 MAX 228 0.5 300 10 300 10 TRIMPOT LOCATION MODEL LABEL 80.1 45 45 101 0.5 HEIGHT MEASUREMENT REFERENCE POINT UL2517 26AWGX20C+AL 30 10 UL2517 14AWGX4C 0.2 TIN DIP WIRES 0.2 SJTW 18AWGX3C 146.68 73.34 73.34 93 (3X) 40.66 CUSTOMER MOUNTING HOLE 4.6 FIT WITH M4 SCREW LCC600 Data Sheet Pin Assignment (INPUT) -9Px Suffix DESCRIPTION DESIGNATION Live L1 Neutral L2 Ground G -4Px Suffix NOTES DESIGNATION NOTES Brown Mating Connector: 350766-1 (Housing); 350536-1 (Contact Terminals) SJTW 18AWGX3C; PVC jacket; 105 C / 300 V Blue Y/GR Pin Assignment (MAIN OUTPUT) -9Px Suffix DESCRIPTION DESIGNATION Main Output +Vout Main Output Return GND -Vout -4Px Suffix (28, 36, 48 Vdc) NOTES DESIGNATION 4 Position Terminal Block: M4 Screw/10mm Pitch; 12kgf-cm Torque; Accepts 14-16AWG Ring Tongue - Spade Terminals MOLEX BB-124-08 (191410058) or EQUIVALENT Red NOTES 14AWGX4C; PVC jacket; 105 C / 300 V Red Black Black -4Px Suffix (12 Vdc) DESIGNATION Red NOTES 6AWG Multi-Strand; PVC jacket; 105 C / 600 V Black Pin Assignment J1501 - Signal & Control SIGNALS DESCRIPTION -9Px Suffix PIN # NOTES -4Px Suffix WIRE COLOR A2_OUT EEPROM Address 1 BLACK GND Ground 2 BROWN A1_OUT EEPROM Address 3 RED -VOUT_RS Remote Sense Return (Main O/P) 4 ORANGE ISHARE Load Share Voltage 5 YELLOW A0_OUT EEPROM Address 6 GREEN SDA Serial Data Signal (I2C) 7 BLUE SPARE_1 Spare/Unused Pin (Dimming input for "-4PD" suffix) 8 SCL Serial clock Signal (I2C) 9 +VOUT_RS Remote Sense (Main O/P) 10 5VSB 5V Standby (1.5A Max) 11 SGND 5V Standby Return 12 SPARE_2 Spare/Unused Pin 13 G_DCOK_C Global DC_OK Collector 14 WHITE/YELLOW WP EEPROM Write Protect 15 WHITE/ORANGE G_DCOK_E Global DC_OK Emitter (GND) 16 WHITE/BLACK GND Return GND for O/P Signal and I2C communication 17 WHITE/RED G_ACOK_C Global AC_OK Collector 18 WHITE/BROWN INH_EN Output Inhibit_Enable Pin (turns output off) 19 WHITE/GREEN G_ACOK_E Global AC_OK Emitter (GND) 20 WHITE/BLUE J1501 Mating Connector: JST PN PHDR-20VS Contact Pins: JST PN SPHD001T-P0.5 NOTES VIOLET GRAY WHITE PINK LIGHT BLUE WHITE/VIOLET 26AWGX20C+AL; PVC jacket; 105 C / 300 V LCC600 Data Sheet Power Derating Curves Figure 1. Output Power vs. Baseplate Temperature Figure 2. Output Power vs. Input Voltage Efficiency Curves Figure 3. Typical Efficiency for 28 V output Figure 5. Typical Efficiency for 36 V output Figure 4. Typical Efficiency for 48 V output Figure 6. Typical Efficiency for 12 V output LCC600 Data Sheet ACCESSORIES Orderable Part Number Description 70-841-030 For Suffix "-9P" AC Input Mating Connector Cable Assembly (w/ 0.3 m wire length) 73-788-001 J1501 (20 Pin Control Signal) Mating Connector with 0.3 m wires attached for "-9P" suffix Diagram PIN 20 PIN 19 PIN 2 PIN 3 PIN 1 300 5 mm 70-841-031 Pre-Cut thermal insulator (Laird TFLEX HR220FG) 700-014447-0000 MIL-STD-461F AC input In-line EMI filter (Zhongguang ZGLPG-10-02M) 73-769-002 USB to I2C High Speed Adaptor for PMBus Communication 750-007213-0000 J1501 (20 Pin) Mating connector with 10 Pin header termination for use with 73-769-002 5005 A 2155 C 1503 O (17X) 3003 50.03 M 17 F E D A B 2 4 9 7 153 466-003103-0000 Test Heatsink for unit characterization. Size: 331 x 220 x 69 mm; Aluminum with natural finish; Weight = 1.7 kgs WORLDWIDE OFFICES Americas Europe (UK) Asia (HK) 2900 S.Diablo Way Tempe, AZ 85282 USA +1 888 412 7832 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom +44 (0) 1384 842 211 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong +852 2176 3333 Artesyn Embedded Technologies, Artesyn and the Artesyn Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. (c) 2018 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com For more information: www.artesyn.com/power For support: productsupport.ep@artesyn.com LCC600 DS 28Mar2018