BAT54H Schottky barrier single diode in small SOD123F package Rev. 01 -- 7 April 2005 Product data sheet 1. Product profile 1.1 General description Planar Schottky barrier single diode with an integrated guard ring for stress protection, encapsulated in a SOD123F small and flat lead SMD plastic package. 1.2 Features Low forward voltage Small and flat lead SMD plastic package Low capacitance Flat leads: excellent coplanarity and improved thermal behavior 1.3 Applications Ultra high-speed switching Voltage clamping Line termination Inverse-polarity protection 1.4 Quick reference data Table 1: Quick reference data Symbol Parameter IF forward current VR reverse voltage forward voltage VF [1] Conditions [1] IF = 10 mA Min Typ Max Unit - - 200 mA - - 30 V - - 400 mV Pulse test: tp 300 s; 0.02. 2. Pinning information Table 2: Pin Pinning Description 1 cathode 2 anode Simplified outline Symbol [1] 1 1 2 2 sym001 [1] The marking bar indicates the cathode. BAT54H Philips Semiconductors Schottky barrier single diode in SOD123F package 3. Ordering information Table 3: Ordering information Type number BAT54H Package Name Description Version - plastic surface mounted package; 2 leads SOD123F 4. Marking Table 4: Marking codes Type number Marking code BAT54H AG 5. Limiting values Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Min Max Unit VR IF reverse voltage - 30 V forward current - 200 mA IFRM repetitive peak forward current tp 1 s; 0.5 - 300 mA IFSM non-repetitive peak forward current tp 10 ms - 600 mA Ptot total power dissipation Tamb 25 C - 375 mW Tj junction temperature - 125 C Tamb ambient temperature -65 +125 C Tstg storage temperature -65 +150 C [1] Conditions [1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint. 6. Thermal characteristics Table 6: Thermal characteristics Symbol Parameter Conditions Rth(j-a) thermal resistance from junction to in free air ambient Rth(j-sp) thermal resistance from junction to solder point Typ Max Unit - - 330 K/W [3] - - 70 K/W [1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint. [2] Reflow soldering is the only recommended soldering method. [3] Soldering point of cathode tab. 9397 750 14919 Product data sheet Min [1] [2] (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 -- 7 April 2005 2 of 8 BAT54H Philips Semiconductors Schottky barrier single diode in SOD123F package 7. Characteristics Table 7: Characteristics Tamb = 25 C unless otherwise specified. Symbol VF Parameter Conditions forward voltage Min Typ Max Unit IF = 0.1 mA [1] - - 240 mV IF = 1 mA [1] - - 320 mV IF = 10 mA [1] - - 400 mV IF = 30 mA [1] - - 500 mV IF = 100 mA [1] - - 800 mV IR reverse current VR = 25 V - - 2 A Cd diode capacitance VR = 1 V; f = 1 MHz - - 10 pF [1] Pulse test: tp 300 s; 0.02. 9397 750 14919 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 -- 7 April 2005 3 of 8 BAT54H Philips Semiconductors Schottky barrier single diode in SOD123F package msa892 103 IF (mA) msa893 103 IR (A) (1) (2) (3) 102 (1) 102 (2) 10 10 1 10-1 (1) (2) (3) 0 1 0.4 0.8 VF (V) (3) 10-1 0 1.2 10 (1) Tamb = 125 C (1) Tamb = 125 C (2) Tamb = 85 C (2) Tamb = 85 C (3) Tamb = 25 C (3) Tamb = 25 C Fig 1. Forward current as a function of forward voltage; typical values 20 VR (V) 30 Fig 2. Reverse current as a function of reverse voltage; typical values msa891 15 Cd (pF) 10 5 0 0 10 20 VR (V) 30 Tamb = 25 C; f = 1 MHz Fig 3. Diode capacitance as a function of reverse voltage; typical values 9397 750 14919 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 -- 7 April 2005 4 of 8 BAT54H Philips Semiconductors Schottky barrier single diode in SOD123F package 8. Package outline 1.7 1.5 1.2 1.0 1 0.55 0.35 3.6 3.4 2.7 2.5 2 0.70 0.55 0.25 0.10 Dimensions in mm 04-11-29 Fig 4. Package outline SOD123F 9. Packing information Table 8: Packing methods The indicated -xxx are the last three digits of the 12NC ordering code. [1] Type number Package BAT54H [1] SOD123F Description Packing quantity 4 mm pitch, 8 mm tape and reel 3000 10000 -115 -135 For further information and the availability of packing methods, see Section 15. 10. Soldering 4.4 4 2.9 1.6 solder lands solder resist 2.1 1.6 1.1 1.2 solder paste occupied area 1.1 (2x) Reflow soldering is the only recommended soldering method. Dimensions in mm Fig 5. Reflow soldering footprint SOD123F 9397 750 14919 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 -- 7 April 2005 5 of 8 BAT54H Philips Semiconductors Schottky barrier single diode in SOD123F package 11. Revision history Table 9: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes BAT54H_1 20050407 Product data sheet - 9397 750 14919 - 9397 750 14919 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 -- 7 April 2005 6 of 8 BAT54H Philips Semiconductors Schottky barrier single diode in SOD123F package 12. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 13. Definitions 14. Disclaimers Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 15. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com 9397 750 14919 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 01 -- 7 April 2005 7 of 8 BAT54H Philips Semiconductors Schottky barrier single diode in SOD123F package 16. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Packing information. . . . . . . . . . . . . . . . . . . . . . Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 1 2 2 2 2 3 5 5 5 6 7 7 7 7 (c) Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 7 April 2005 Document number: 9397 750 14919 Published in The Netherlands