NOT RECOMMENDED FOR NEW DESIGNS HPR4XXC See product selection chart www.murata-ps.com for alternatives 0.75 Watt Miniature SIP DC/DC Converter PRODUCT OVERVIEW The HPR4XXC Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 170kHz push-pull oscillator is used in the input stage. The HPR4XXC Series reduces beat-frequency oscillation problems when used with high frequency isolation amplifiers. Reduced parts count and high efficiency add to the reliability of the HPR4XXC Series. degradation of reliable operation. In addition, the high efficiency of the HPR4XXC Series means the series is able to offer greater than 10 W/inch3 of output power density. Operation down to no load will not impact the reliability of the series, although this product has a >1mA minimum load for specifications purposes. The HPR4XXC Series provides high isolation in a very small package. The use of surface mounted devices and manufacturing technologies makes it possible to offer premium performance and low cost. The high efficiency of the HPR4XXC Series means less internal power dissipation, as low as 190mW. With less heat to dissipate the HPR4XXC Series can operate at higher temperatures with no FEATURES High Isolation Voltage: 3000 VPK Test High Output Power Density: 10 Watts/Inch3 Single-In-Line Package (SIP) Extended Temperature Range: -25C to +85C Internal Input and Output High Efficiency to 79% Low Cost RoHS Compliant Non-Conductive Case PRODUCT SELECTION CHART OBSOLETE NOT RECOMMENDED FOR NEW DESIGNS Model HPR400C HPR402C HPR403C HPR404C HPR405C HPR407C HPR410C HPR411C HPR414C HPR417C HPR418C HPR422C HPR423C HPR401C HPR406C HPR408C HPR409C HPR412C HPR413C HPR415C HPR416C HPR419C HPR420C HPR421C Nominal Input Voltage Rated Output Voltage Rated Output Current VDC VDC mA 5 5 5 5 5 12 12 12 15 15 24 24 24 5 12 12 12 15 15 15 15 24 24 24 5 15 5 12 15 12 12 15 15 15 5 12 15 12 5 15 5 5 12 5 12 12 15 5 150 50 75 30 25 62 30 25 50 25 150 30 25 62 150 50 75 150 62 75 30 62 50 75 No Load 20 20 20 20 20 10 10 10 8 8 8 8 8 20 10 10 10 8 8 8 8 8 8 8 Input Current Rated Load Typ. Max. mA 216 235 212 235 218 245 212 235 220 220 81 90 81 90 81 90 72 80 63 66 48 53 45 50 45 50 212 235 90 100 81 90 88 98 72 80 72 80 72 80 63 70 48 53 45 50 45 50 Reflected Efficiency Ripple Current mAp-p 10 5 5 5 5 5 5 5 5 5 15 15 15 5 5 5 5 5 5 5 5 15 15 15 Recommended Alternatives % 69 71 68 68 75 77 74 77 69 79 65 67 69 70 69 77 71 69 69 69 76 65 69 69 NMV0505SAC / MEV1S0505SC NMV0515SAC / MEV1S0515SC NMV0505SC / MEV1D0505SC NMV0512SC / MEV1D0512SC NMV0515SC / MEV1D0515SC NMV1212SAC / MEV1S1212SC NMV1212SC / MEV1D1212SC NMV1215SC / MEV1D1215SC NMV1515SAC / MEV1S1515SC NMV1515SC / MEV1D1515SC MEV1S2405SC MEV1D2412SC MEV1D2415SC NMV0512SAC / MEV1S0512SC NMV1205SAC / MEV1S1205SC NMV1215SAC / MEV1S1215SC NMV1205SC / MEV1D1205SC NMV1505SAC/ MEV1S1505SC NMV1512SAC / MEV1S1512SC NMV1505SC / MEV1D1505SC NMV1512SC / MEV1D1512SC MEV1S2412SC MEV1S2415SC MEV1D2405SC For full details go to www.murata-ps.com/rohs www.murata-ps.com www.murata-ps.com/support All enquiries: www.murata-ps.com/support 2013-08-06 TDC_HPR4xxC.C04 Page 1 of 4 HPR4XXC 0.75 Watt Miniature SIP DC/DC Converter SPECIFICATIONS, ALL MODELS Specifications are at TA = +25C nominal input voltage unless otherwise specified. PARAMETER CONDITIONS GENERAL OUTPUT INPUT Voltage Range MIN TYP MAX UNITS 4.5 10.8 13.5 21.6 5 12 15 24 5.5 13.2 16.5 26.4 VDC VDC VDC VDC 750 5 200 40 7 15 18 .05 mW % mVp-p mVrms VDC VDC VDC %/C OUTPUT Rated Power Voltage Setpoint Accuracy Ripple & Noise Rated Load, Nominal VIN BW = DC to 10MHz BW =10Hz to 2MHz Voltage (Over Input Voltage Range) 1mA to Rated Current, VOUT = 5V 1mA to Rated Current, VOUT = 12V 1mA to Rated Current, VOUT = 15V Temperature Coefficent REGULATION Load Regulation (All other modes) Rated Load to 1mA Load GENERAL ISOLATION Rated Voltage Test Voltage 60 Hz, 60 Seconds Resistance Capacitance Leakage Current VISO= 240VAC, 60Hz Switching Frequency Frequency Change Over Line and Load Package Weight MTTF per MIL-HDBK-217, Rev. F* Circuit Stress Method Ground Benign TA = +25C TEMPERATURE Specification Operation Storage 150 30 4.75 11.40 14.25 .01 3 % 1000 3000 10 25 2 170 24 100 7 3 7.9 -25 -40 -40 VDC Vpk G pF Arms kHz % g MHr +25 +85 +100 +110 C C C SOLDERING INFORMATION The HPR4XXC devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device's plastic body will not be compromised and internal temperatures within the converter will not exceed 175C. Care should be taken to control manual soldering limits identical to that of wave soldering. www.murata-ps.com www.murata-ps.com/support All enquiries: www.murata-ps.com/support 2013-08-06 TDC_HPR4xxC.C04 Page 2 of 4 HPR4XXC 0.75 Watt Miniature SIP DC/DC Converter TYPICAL PERFORMANCE CURVES Specifications are at TA = +25C nominal input voltage and nominal load. VOUT VS LOAD (5Vout Models) VOUT VS LOAD (5Vout Models) 5.7 5.4 5.5 5.2 VOUT VS LOAD (12Vout Models) 12.5 5.3 12.3 Vout Vout Vout 12.4 5.0 12.2 12.1 5.1 4.8 4.9 4.6 12.0 0 80 40 120 160 11.9 0 Output Current (mA) 20 40 60 0 80 VOUT VS LOAD (12Vout Models) 80 16.5 16.0 15.7 12.4 15.5 12.3 15.5 Vout Vout Vout 60 VOUT VS LOAD (15Vout Models) 15.9 12.5 40 Output Current each load (mA) VOUT VS LOAD (15Vout Models) 12.6 15.0 12.2 15.3 14.5 12.1 15.1 14.0 12.0 14.9 0 10 20 30 13.5 0 40 20 40 60 80 Output Current each load (mA) Output Current each load (mA) EFFICIENCY VS LOAD OSCILLATION FREQUENCY VS TEMPERATURE 90 0.2 0 0.4 0.6 0.8 1.0 Output Power each load (Watts) 220 Frequency (KHz) 75 Efficiency (%) 20 Output Current each load (mA) 60 45 30 15 200 180 160 0 20 0 140 60 40 80 -30 100 % of Rated Load (%) 0 30 60 90 Temperature (C) SAFE OPERATING AREA LOAD CAPACITANCE vs INPUT RISE TIME (5 Vout models) 600 50 Total Load Capacitance (uF) 500 Total Load Capacitance (uF) LOAD CAPACITANCE vs INPUT RISE TIME (15 Vout models) 60 400 300 SAFE OPERATING AREA 200 40 30 SAFE OPERATING AREA 20 10 100 0 0 0 5 10 15 20 25 30 35 Rise Time of Input Voltage (mS) 40 45 50 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) LOAD CAPACITANCE vs INPUT RISE TIME (12 Vout models) Total Load Capacitance (uF) 90 NOTES: 1.) When operated within the SAFE OPERATING AREA as defined by the above curves, the output voltage of HPR4XXC devices is guaranteed to be within 95% of its steady-state value within 100 milliseconds after the input voltage has reached 95% of its steadystate value. 2.) For dual output models, total load capacitance is the sum of the capacitances on the plus and minus outputs. 80 70 60 50 SAFE OPERATING AREA 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 Rise Time of Input Voltage (mS) www.murata-ps.com www.murata-ps.com/support All enquiries: www.murata-ps.com/support 2013-08-06 TDC_HPR4xxC.C04 Page 3 of 4 HPR4XXC 0.75 Watt Miniature SIP DC/DC Converter MECHANICAL 0.2400.010" (6.090.25) 0.770.010" (19.560.25) FRONT VIEW 0.3970.010" (10.160.25) 1 2 0.020.002" (0.510.05) 5 6 7 0.180.015" (4.570.38) RIGHT SIDE VIEW 0.0200.010" (0.510.25) 0.0100.002" (0.250.05) 0.140" MIN (3.56) BOTTOM VIEW 0.0350.015" (0.890.38) PIN CONNECTIONS 1. +VIN 2. -VIN 5. -VOUT 6. COM* 7. +VOUT *Common pin not present on single output models. ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation ...................................450mW ShortCircuitDuration ............................................Momentary Lead Temperature (soldering, 10 seconds max ...+300C*) *NOTE: Refer to Reflow Profile for SMD Models. Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED www.murata-ps.com www.murata-ps.com/support : Notes: All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) PIN PLACEMENT TOLERANCE: 0.015" MATERIAL: Lead material is phosphor bronze; lead QLVK is 100-300 microinches of matte tin over a barrier layer of 5-40 microinches of nickel. ORDERING INFORMATION HPR 4XX Device Family HPR Indicates DC/DC Converter Model Number Selected from Table of Electrical Characteristics RoHS Compliant Version C This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: http://www.murata-ps.com/requirements/ Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. (c) 2013 Murata Power Solutions, Inc. All enquiries: www.murata-ps.com/support 2013-08-06 TDC_HPR4xxC.C04 Page 4 of 4